* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_nmi_message_handler): make sure 'dialog' exists before using it
* src/NetworkManagerDevice.c
- (nm_device_new): Don't store the entire range struct, use only what we need
(which is currently avg_quality, max_quality, and frequencies). Also
zero device structure when we've free'd it to maybe expose errors down
the line.
- (nm_device_update_signal_strength): grab the scan mutex before getting
quality data from the card since quality will be useless during a scan.
Call updated wireless qual-to-percent function with values stored in
nm_device_new() earlier.
- Remove some unused functions (nm_device_get_max_quality(), nm_device_get_noise(),
nm_device_get_bad_crypt_packets())
- (nm_device_activate_wireless_adhoc): use new frequency values we go in
nm_device_new()
- (get_initial_auth_method): always use the Auth method that's in the allowed
list if available. Problem was this: when the WEP key is wrong, NM will
try OS then SK modes, and then get stuck in SK mode after that. This
should reset it.
- (nm_device_wireless_process_scan_results): work with new qual-to-percent
function
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): try to make this function actually work and
mimic iwlib behavior. Use card's idea of quality divided by max_qual
if that's all present, otherwise fall back to signal-to-noise ratios.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@402 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_add_network_address): if the network doesn't yet exist in
GConf, make a minimal entry for it (essid & timestamp)
* src/NetworkManagerAPList.c
- (nm_ap_list_populate_from_nmi): Don't try to grab network data if
NetworkManagerInfo isn't running
* src/NetworkManagerDbus.[ch]
- (nm_dbus_nmi_is_running): new function
* src/NetworkManagerDevice.c
- (nm_device_wireless_force_use): Don't set the created AP's MAC
address to garbage.
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): On successful activation, make sure
the "best" AP has a MAC address, and don't tell NMI to add the
current AP's MAC address to GConf if the AP is an Ad-hoc AP.
- (nm_policy_allowed_ap_list_update): Update a wireless card's "best"
access point after refreshing our allowed list if it doesn't already
have a "best" access point.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@400 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
- Check DBUS version in configure, and set the C macros
DBUS_VERSION_[MAJOR,MINOR,MICRO]
* info-daemon/NetworkManagerInfoDbus.c
- Remove #if 0-d section of code that quit NMI if NM went away.
* panel-applet/NMWirelessAppletDbus.c
- Trap the "ServiceOwnerChanged" signal that's new in dbus-0.23
* src/NetworkManager.c
src/NetworkManagerMain.h
src/NetworkManagerDbus.c
- Trap the "ServiceOwnerChanged" signal that's new in dbus-0.23
- Make updating of our Allowed Wireless Network lists from NMI
an idle function in the main thread now, with a high priority.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@398 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Cache last-known-good wireless authentication method in
NetworkManagerInfo, and use that method first during
wireless device activation. Should speed up devices that
need Shared Key authentication method since Open System is
now the default.
* Remove the hack to not do full activation on wired connections
that are active when we launch, it causes too many problems
with name resolution and was a hack in the first place.
* Re-work wireless device activation again somewhat to have a
clearer chain of events and to use last-known-good
authentication method of the access point. Also provide
better status throughout activation to ensure the applet
can tell the user exactly what's going on.
* Remove the "find wireless network" code and now simply attempt
to activate with that access point. This reduces the delay
between selecting "Other wireless Network" and actually
connecting to that network.
* Correctly stop the device's worker thread when its removed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@388 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Use correct timeout value
* info-daemon/NetworkManagerInfoDbus.c
src/NetworkManagerDbus.c
- Consolidate communication between NM and NMI by doing only 1 dbus
method call to get Wireless Network info from NMI instead of 6
* src/NetworkManager.c
- Make sure to cancel activation when we receive a SIGTERM, otherwise
when we didn't have an AP to use, we'd wait for one forever without
quitting
* src/NetworkManagerDevice.c
- nm_device_activation_cancel(): Fix a race between dhcp and quitting
activation, dhcp might not have started yet but we don't quit activation
before starting it, so the quit signal gets lost
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@363 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Ad Ad-Hoc networking mode support. In Ad-Hoc mode, we only try to get
link-local addresses instead of doing DHCP.
* In the panel applet, there's a new "Create new Wireless Network..." item
* The panel applet also sticks around now even if NetworkManager dies, but
it doesn't hide its icon when NM isn't around. Not hiding the icon is
a bug, I'll fix that later.
* We also don't use 'nscd' anymore in the RH backend, it was impeding name
lookups after a switch rather than actually doing them.
* Clean up some of those warnings in nm_ap_list_* functions
* Delay between scans changed to 15s instead of 10s
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@342 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in: Suck in gcc warnings code from Rhythmbox,
but use fewer default flags, and in particular add -Wno-unused,
since the codebase has a lot of unused variables.
* test/nmtestdevices.c (create_device):
* test/nminfotest.c (get_network_string_property)
(get_networks_of_type):
* test/nmclienttest.c (main):
* src/NetworkManagerDbus.c (nm_dbus_create_error_message):
* initscript/NMLaunchHelper.c (get_nm_status):
* info-daemon/NetworkManagerInfoPassphraseDialog.c (update_button_cb):
* info-daemon/NetworkManagerInfoDbus.c (nmi_dbus_create_error_message):
Fix declarations after statements.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@331 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c (nmi_dbus_return_vpn_password): New method.
(nmi_dbus_get_vpn_userpass): New method.
(nmi_dbus_nmi_message_handler): Invoke it.
* info-daemon/NetworkManagerInfoDbus.h (nmi_dbus_return_vpn_password): Prototype.
* info-daemon/NetworkManagerInfoVPN.h,
info-daemon/NetworkManagerInfoVPN.c: New files; responds
to requests for VPN passwords.
* configure.in (GNOME_KEYRING_LIBS): Check for gnome-keyring.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@329 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Cache access point MAC addresses in NetworkManagerInfo after you've explicitly
connected to them. Then, after a scan, match up non-ESSID-broadcasting access
points with any cached MAC addresses from NetworkManagerInfo. Allows us to
show known access points that don't broadcast their ESSID in the menus without
any user intervention whatsoever.
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_get_network_addresses, nmi_dbus_add_network_address): new functions
for dbus method calls "getNetworkAddresses" and "addNetworkAddress"
* src/NetworkManagerAP.[ch]
- Add a "user_addresses" data member to the NMAccessPoint structure
- (nm_ap_get_user_addresses, nm_ap_set_user_addresses): new functions for accessing
the user_addresses data member
* src/NetworkManagerAPList.c
- (nm_ap_list_get_ap_by_address): check user_addresses list too, instead of just
the AP's reported address
- (nm_ap_list_update_network): grab the user_addresses list from NetworkManagerInfo
* src/NetworkManagerDHCP.c
- Increase DHCP timeout from 25s -> 30s
* src/NetworkManagerDbus.[ch]
- (nm_dbus_get_network_addresses, nm_dbus_add_network_address): have NMI get/set
user addresses
* src/NetworkManagerDevice.c
- (nm_device_set_wireless_config): bring down the interface, wait 4s, bring it up,
wait 2s, then configure it. Sometimes Prism54 cards will freeze up with
"mgnt tx queue full", seemingly in response to NM controlling the card too much.
So, we take the card down to clear it out.
- (nm_device_do_normal_scan): Copy over AP ESSIDs from the allowed access point list
too, since that's where the user_addresses are
* src/NetworkManagerPolicy.c
- (nm_state_modification_monitor): Tell NMI to add an AP's hardware address to
that wireless networks' user_addresses list upon successful activation
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@319 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c (nmi_dbus_service_init): Delete
call to nmi_dbus_is_running too, not necessary anymore.
* info-daemon/NetworkManagerInfoDbus.c: Include stdlib.h to
pick up exit().
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@306 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c (nmi_dbus_is_running):
Delete.
(nmi_dbus_service_init): Call dbus_bus_acquire_service with
the DBUS_SERVICE_FLAG_PROHIBIT_REPLACEMENT flag, and
then check the result for DBUS_SERVICE_REPLY_SERVICE_EXISTS.
This avoids a race condition that made it pretty easily
possible to get two NetworkManagerInfo daemons running.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@305 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
src/NetworkManagerDbus.[ch]
src/NetworkManagerDevice.c
- Keep track of the # of attempts to get the WEP key
from the user and pass that along to the info daemon
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@297 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.c
info-daemon/NetworkManagerInfoPassphraseDialog.c
panel-applet/NMWirelessApplet.c
- Properly escape gconf keys
* src/NetworkManager.c
- remove unused variables
* src/NetworkManagerAP.c
- (nm_ap_new_from_ap): Don't redundantly set new APs
refcount since it got set in nm_ap_new()
* src/NetworkManagerAPList.c
- (nm_ap_list_combine): Give up ownership of newly created
access points to the ap list, fixes memleak
* src/NetworkManagerDevice.c
- Remove cached_ap_list4 member since its not really needed
- (nm_device_wireless_network_exists): Try to get correct
encryption status of a found AP if its already in our
device list
- (nm_device_do_normal_scan): Clean up scanning a bit, make
memory allocs/deallocs a bit clearer and shorter-lived
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@275 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- (nmi_dbus_is_running): New function for determining if nmi is already running
- (nmi_dbus_service_init): exit if another instance of nmi is already running
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@273 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- Trap the "DeviceActivationFailed" signal
* docs/NetworkManager DBUS API.txt
- Add "DeviceActivationFailed" signal
* panel-applet/NMWirelessAppletDbus.c
- Quash the "NetworkManager service not available" message
* src/NetworkManagerDbus.[ch]
- Add the "DeviceActivationFailed" signal
* src/NetworkManagerDevice.c
- Add support for activation_failed flag
- Fix deadlock where activation thread didn't clean itself up, making
main thread still believe it was alive forever (didn't reset activation
flags like activating, just_activated, etc when IP configuration
failed)
* src/NetworkManagerPolicy.c
- Implement logic for DeviceActivationFailed signal, and when activation fails
for wireless networks, try to fall back to some other access point
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@268 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NetworkManager.h
- New file, now contains commonly used structures and bits
for the dbus API of NetworkManager
* Makefile.am
- Deliver NetworkManager.h to ${includedir}/NetworkManager
* src/NetworkManager.h
- Rename -> src/NetworkManagerMain.c
* Various fixups all around to use NetworkManager.h and new
src/NetworkManagerMain.h, remove redundant bits that got
moved into NetworkManager.h
* src/NetworkManagerDevice.[ch]
src/NetworkManagerUtils.[ch]
src/NetworkManagerPolicy.c
src/NetworkManagerDbus.c
- Whitelist wireless drivers, and blacklist some wired
drivers. Also blacklist cipsec and ethernet-over-usb
devices at this time (RH #135722, RH #135648)
- Don't leak unsupported devices out over dbus, or allow
them to be set as the active device. Skip over them
during automatic device picking
* test/nmclienttest.c
- Clean up the dbus code a lot
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@261 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
- Display name of network in the "network not found" dialog
* panel-applet/NMWirelessAppletDbus.c
- (nmwa_dbus_call_nm_method): new function replaces all other
nmwa_dbus_get_[string|string_array|int|boolean] methods
- nmwa_dbus_get_network_name() and nmwa_dbus_get_device_name()
consolidated into nmwa_dbus_get_object_name()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@254 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDbus.c
info-daemon/NetworkManagerInfoDbus.c
- Display an error dialog when the user tries to use an
"Other wireless network" that's not found.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@250 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NWManagerInfo.h
- (struct NetworkManagerInfo): add shutdown_timeout GSource
* info-daemon/NWManagerInfoDbus.c
- (shutdown_callback): new function
- (nmi_dbus_filter): Create a 30 second timeout until shutdown
if NetworkManager goes away. Kill the timeout
if NetworkManager restarts before the 30 seconds
are up.
- (nmi_dbus_service_init):
- call gtk_main_quit if NetworkManager is not running
- add filters to monitor dbus service creations and
deletions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@204 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.[ch]
info-dameon/NetworkManagerInfoDbus.[ch]
info-daemon/NetworkManagerInfoPassphraseDialog.[ch]
- Preserve original label text in the passphrase dialog so that
it actually gets updated with the new network name the next
time around. Previously, we were overwriting it so you'd get
the wrong network name to enter a key for
- Add a "Key Type" combo to the passphrase dialog, user selects
encryption key type now, type is stored in GConf too
- Adjust NM<->NMI DBUS protocol to pass the key type back to NM too
* src/NetworkManagerAP.[ch]
- Remove all the encyption method magic. It's now set by the user
and NetworkManager retrieves the type of encryption key from
NetworkManagerInfo
* src/NetworkManagerAPList.[ch]
src/NetworkManagerDbus.[ch]
- Adjust to new way of setting encryption key and method
- Pull encryption method down from NMI along with key
* src/NetworkManagerDevice.[ch]
- Removed encryption method fallback magic as the method is now
determined by the user. This greatly simplifies the connection
logic.
- More robust connection/link logic. Besides removing the encryption
method fallback magic, check whether or not the card is receiving
invalidly encrypted packets, which usually indicates that we have
a bad WEP key set.
- Don't blindly forge ahead when DHCP fails (still not completely fixed)
* test/nminfotest.c
- Test out new "Key Type" stuff in the NMI passphrase dialog
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@195 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.[ch]
- Add a slightly more robust method of determining if the WEP key
is correct or not, by checking the WEP-discarded packet count
on the card
* info-daemon/NetworkManagerInfo.c
- (nmi_gconf_notify_callback): Fix GConf essid escaping, should
un-escape values we pull out rather than escaping them
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@189 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.c
test/nminfotest.c
- Escape ESSIDs in gconf
* src/NetworkManagerDevice.c
- Fix pseudo-scanning to use netowrk list from info daemon
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@182 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in: Add a temporary --enable-notification-icon. This
will prolly go away.
* info-daemon/Makefile.am:
* info-daemon/NetworkManagerInfo.c:
* info-daemon/NetworkManagerInfo.h: Use a notification icon.
* panel-applet/Makefile.am:
* panel-applet/NMWirelessApplet.c: Turn into a notification icon
* panel-applet/NMWirelessApplet.h:
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@180 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Changes from J5
* info-daemon/NetworkManagerInfo.conf: fixed own permissions
* info-daemon/NetworkManagerInfoDbus.c: added service name to
syslog output
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@176 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/no-networkmanager.png
panel-applet/Makefile.am
panel-applet/NMWirelessApplet.c
- Add a "NetworkManager not running" icon and use it
- Use new consolidated GConf keys rather than Preferred/Trusted
* TODO: update
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.[ch]
info-daemon/NetworkManagerInfoPassphraseDialog.c
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
- Add a "getNetworkTrusted" dbus method
- "WirelessNetworkUpdate" signal now sent rather than
"PreferredNetworkUpdate/TrustedNetworkUpdate" signals
- Start freeing some dbus errors (not completed yet)
* info-daemon/passphrase.glade
- Remove the "don't show" hints for pager and taskbar
- Add a title since its going to be in the taskbar
* src/NetworkManager.[ch]
src/NetworkManagerAPList.[ch]
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
* src/NetworkManagerAP.[ch]
- Add get/set "trusted" accessors and data bit
* src/NetworkManagerDbus.[ch]
- Add function to get "trusted" status of a network from NetworkManagerInfo
- Trap new WirelessNetworkUpdate signal rather than old separate signals
* src/NetworkManagerDevice.[ch]
- Add per-device config data (ip4 addr, gateway, netmask) and accessors
- (nm_device_new): Get device config from backend when initializing devices
- (nm_device_activation_worker): Split out device configuration on
activation to deal with static/dynamic IP differences, and try encryption
fallbacks on a device if the encryption method for the best AP is not good
- (nm_device_update_best_ap): convert to new consolidated access point lists from
NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it
* src/NetworkManagerWireless.c
- libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it
* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSystem.h
- (nm_system_device_update_config_info): Add function to get device configuration
from system data in ifcfg-* files
* src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerSlackware.c
- Add stub functions for getting device configuration
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
- Rework menu code to add devices to menu, and to show
signal strength for each access point. Code cleanups
too.
* panel-applet/NMWirelessAppletDbus.c
- Grab network devices from NetworkManager too
- Grab quality information from NM for wireless networks
* src/NetworkManagerDbus.[ch]
- Add dbus methods for getting the HAL UDI from a device and
for getting its base quality, if its wireless
- Consolidate some functions (wireless network notifications,
device notifications)
- Add method for requesting NM to use a particular device
* src/NetworkManager.c
- Change for function consolidations from NetworkManagerDbus.c
- Implement active device locking and user-requested devices
(ie, tell NM to use a particular device instead of the one
it autochose)
* src/NetworkManagerDevice.c
- Add method for getting the base quality of a device, if its
wireless
- Grab device base quailty info from iwlib during scans
* src/NetworkManagerPolicy.c
- Use a user-requested device rather than the auto-chosen device
if we are told to
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@81 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfo.c:
- (main): clean up Seth's code style
* info-daemon/NetworkManagerInfoDbus.c:
- Use the more aptly-named path/service/interface constants from NetworkManager
- Don't return empty strings ("") as object paths ever, instead return errors
* panel-applet/NMWirelessApplet.c:
- Clean up Seth's code style
* src/NetworkManager.[ch]
- (nm_remove_device_from_list): remove anything having to do with pending_device
- (main, nm_print_usage): change --daemon=[yes|no] -> --no-daemon
* src/NetworkManagerAPList.[ch]
- Move Iter struct right above the iter functions to preserve opacity
- (nm_ap_list_remove_ap): implement
- (nm_ap_list_update_network): deal with errors returned from nm_dbus_get_network_priority(),
remove AP if NetworkManagerInfo doesn't know anything about it
- (nm_ap_list_diff): user NMAPList iterators
- (nm_ap_list_print_members): implement debugging function
* src/NetworkManagerDbus.[ch]
- (nm_dbus_nm_get_active_device): remove anything to do with pending_device
- (nm_dbus_get_user_key_for_network): remove DBusPendingCall stuff (unused),
and move the actual key setting stuff into NetworkManagerDevice.c
- (nm_dbus_get_network_priority): return -1 now on errors
- (nm_dbus_nmi_filter): fix strcmp() error that caused PreferredNetworkUpdate signals to
get lost, and force the active device to update its "best" ap when AP lists change
- (nm_dbus_nm_message_handler): Update conditions for returning "connecting" for a "status"
method call due to pending_device member removal
* src/NetworkManagerDevice.[ch]
- Move NMDevice structure to the top
- Add a wireless scan mutex and a best_ap mutex to the Wireless Options structure
- Remove Pending Action stuff from everywhere
- (nm_device_activation_*): We now "begin" activation and start a thread to do the
activation for us. This thread blocks until all conditions for activation have
been met (ie for wireless devices, we need a valid WEP key and a "best" ap), and
then setup up the interface and runs dhclient. We have to do this because there
is no guaruntee how long dhclient takes, and while we are blocking on it, we cannot
run our main loop and respond to dbus method calls or HAL device removals/inserts
- (nm_device_set_user_key_for_network): Move logic here from NetworkManagerDbus.c so we
can tell nm_device_activation_worker() that we've got a key
- (nm_device_*_best_ap): lock access to best_ap member of Wireless Options structure
- (nm_device_get_path_for_ap): dumb it down so the list doesn't lock against itself when
diffing (AP appear/disappear signal functions make sure the AP is actually in the device's
list)
- (nm_device_update_best_ap): move logic from nm_wireless_is_ap_better() here
* src/NetworkManagerPolicy.c
- Remove anything to do with pending_device
- Adjust device activation to deal with activation-in-worker-thread
* src/NetworkManagerUtils.c
- Clean up locking debugging a bit
* src/NetworkManagerWireless.[ch]
- (nm_wireless_is_ap_better): remove, stick logic in nm_device_update_best_ap(). This function
was badly named and is better as a device function
* panel-applet/.cvsignore: add
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@46 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* test/nminfotest.c
- Update to new NMI dbus API, check different network types
* info-daemon/NetworkManagerInfoDbus.c
- Update to new NM dbus API, ie network type sent in query message
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@36 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* TODO
- new task: proper logging support
* info-daemon/NetworkManagerInfo.c
- Correct spelling of "canceled"
- Correct casting of objects for g_signal_connect()
* info-daemon/NetworkManagerInfoDbus.c
- Add defines for NetworkManager namespace and object path, and use them
- Add filter function to trap new signals from NetworkManager:
WirelessNetworkAppeared, WirelessNetworkDisappeared
* info-daemon/passphrase.glade
- Change name of "ok" button to "Login to Network..."
- Mark invisible
* src/NetworkManager.c
- Code and debug message cleanups
- Rename "nm_add_current_devices"->"nm_add_initial_devices"
- (nm_add_initial_devices) Check returned string array of devices
and don't try to add devices if array is NULL
- (main) Initialize libhal a bit later, make code a bit clearer
* src/NetworkManagerAP.[ch]
- New accessor and data member "matched": used to speed up AP list
diffing
- New accessor and data member "enc_method": will be used during key
fallback to cache which passphrase->key conversion actually works
so we don't have to do it every time
* src/NetworkManagerAPList.[ch]
- (nm_ap_list_find_ap_in_list) New: find an AP by essid in an AP list
- (nm_ap_list_diff) New: given two lists of access points, find the differences
between them, and send WirelessNetworkAppeared/Disappeared signals over
dbus in response to those differences
* src/NetworkManagerDbus.[ch]
- (nm_dbus_get_object_path_from_ap) New: given a device and an access point,
make an object path for that access point (NOTE that we don't yet check to
make sure that access point is actually in the device's AP list yet)
- (nm_dbus_get_ap_from_object_path) Renamed from nm_dbus_get_network_from_object_path
- (nm_dbus_signal_wireless_network_appeared, nm_dbus_signal_wireless_network_disappeared)
New: signal appearance/disappearance of wireless networks
- (nm_dbus_set_user_key_for_network) Mark the network/ap as invalid if the user cancelled
key entry
* src/NetworkManagerDevice.[ch]
- (nm_device_ap_list_clear) Use nm_ap_list_free rather than doing it ourselves
- (nm_device_ap_list_get) New: return the AP list (static function)
- (nm_device_do_normal_scan) Destroy old AP list later, so that we can diff the
new one resulting from the scan with the old one
* src/NetworkManagerWireless.c
- (nm_wireless_is_most_prefered_ap) "invalid" access points cannot be "best" access points
* test/nminfotest.c
- #define object paths and namespaces and use the #defines rather than static strings
- Test out user-key functionality of NetworkManagerInfo too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@33 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* info-daemon/NetworkManagerInfoDbus.c
src/NetworkManagerDbus.c
- Update to current DBus (ie don't use decomposed paths when registering
object paths/fallbacks)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@32 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAPList.[ch]
src/Makefile.am
- Add. Deal with allowed network list additions, deletions, and updates
* dispatcher-daemon/NetworkManagerDispatcher.c
- Add missing <dbus/dbus.h> header
* info-daemon/NetworkManagerInfo.[ch]
- Add missing <dbus/dbus.h> header
- Implement the GConf notify callback to signal NetworkManager of an allowed
network change
- Better error checking
* info-daemon/NetworkManagerInfoDbus.[ch]
- Add missing <dbus/dbus.h> header
- Convert to using dbus_message_append_args/dbus_message_get_args
- Implement nmi_dbus_signal_update_allowed_network() to signal NetworkManager
that an allowed network changed. We don't want to signal on individual
keys _inside_ an allowed network really, just want NM to query the info
daemon for updated info on all keys.
- Better error checking
* src/NetworkManager.[ch]
- Add missing <dbus/dbus.h> header
- Move allowed_ap_list free functions to NetworkManagerAPList.[ch]
- Zero out NMData structure on free
- No longer use a thread for allowed_ap_list updating, instead its now done
through dbus queries against NetworkManagerInfo
- Populate allowed_ap_list initially before adding existing network devices
to the device list, so wireless devices can get their "best" AP
* src/NetworkManagerDbus.[ch]
- Convert to using dbus_message_append_args/dbus_message_get_args
- Better error checking
- Implement Allowed Network info functions to request allowed network
info from NetworkManagerInfo
- Implement the filter function to process signals from NetworkManagerInfo
about changing allowed networks
* src/NetworkManagerDevice.c
- Fix file descriptor leak in nm_device_update_ip4_address()
`CVS: Modified Files:
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@22 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
- Add checks for GConf libs & headers & flags
* info-daemon/Makefile.am
- Add GConf flags & libs to compile/link stages of NetworkManagerInfo
* info-daemon/NetworkManagerInfo.[ch]
- Don't use gquarks for data storage, just use normal data storage
- Add gconf bits to watch /system/networking/wireless/allowed_networks
* info-daemon/NetworkManagerDbus.[ch]
- Add method call for getting allowed networks
- Add method calls for getting an allowed network's essid, priority, and key
- Hook the method calls up to GConf
- Split user key dialog code into separate function (nmi_dbus_get_key_for_network)
- nmi_dbus_nmi_message_handler(): make sure to unref the reply message after sending
* src/NetworkManagerDbus.[ch]
- Switch for enumeration of networks to using essid instead
* test/Makefile.am
test/nminfotest.c
- Add test program for NetworkManagerInfo
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@19 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Makefile.am
- Add info-daemon directory
* configure.in
- Check for glade libs and headers
- Add info-daemon directory
* src/NetworkManagerAP.c
- nm_ap_new_from_ap(): Fix bug that resulted in an APs encryption status not getting
copied over to the new AP.
* src/NetworkManagerDbus.c
src/NetworkManagerDbus.h
- Deal with nm_device_ap_list_get_ap()->nm_device_ap_list_get_ap_by_index() change
- Remove nm_dbus_signal_need_key_for_network()
- Add disabled code for asynchronous user wep key callbacks
- Add functions for getting, setting, and cancelling user key operations
- Remove "setKeyForNetwork" device dbus method call, its on NetworkManager object instead
- Add "setKeyForNetwork" dbus method call on NetworkManager object
* src/NetworkManagerDevice.c
src/NetworkManagerDevice.h
- nm_device_update_link_active(): revert changes for wireless link detection, the WEP-key-is-wrong
logic is in device activation now
- nm_device_activate(): for wireless devices, if we can't associate with access point (perhaps
key is wrong) trigger get-user-key pending action
- Implement get-user-key pending action stuff, tie to dbus messages
- Rename nm_device_ap_list_get_ap() -> nm_device_ap_list_get_ap_by_index()
- Add nm_device_ap_list_get_ap_by_essid()
- Instead of copying "best" access points, ref them instead so that the key we set
sticks around
* src/NetworkManagerPolicy.c
- Deal with wrong WEP key, but right access point (and if so, return link_active = TRUE)
- Don't cancel pending actions on a device if its the same device as last iteration
- Only promote pending_device->active_device if activation was successfull
* src/Makefile.am
- Rename nmclienttest->nmtest
* info-daemon/Makefile.am
info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfo.h
info-daemon/NetworkManagerInfoDbus.c
info-daemon/NetworkManagerInfoDbus.h
info-daemon/passphrase.glade
info-daemon/NetworkManagerInfo.conf
info-daemon/keyring.png
- Import sources for info-daemon, which pops up dialog for passphrase/key when
NetworkManager asks for it, and also will (soon) provide "allowed" access point
lists to NetworkManager by proxying user's GConf
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@16 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
