For RFC1918 private IPv4addresses, guess a better prefix length for
addresses and routes.
nmtui is an interactive program. It makes sense to be a bit smarter
about what the user probably meant.
It would be nice if nmtui would update the entry field immediately when
the cursor leaves the field, to show the guessed prefix length. However,
that is not easily possible, so lets to that another time.
For IPv6 addresses, default to /64 instead of /128.
https://bugzilla.redhat.com/show_bug.cgi?id=1474295
strtoul() operates on "unsigned long" while NmtNewtEntryNumeric uses
"int".
strtoul() might indicate that the text is a valid "unsigned long",
however, then casting to "int" might lead to truncation of the number
and wrong range check.
Also, the type supposedly handles negative integers as well. Not with
strtoul().
When entering a manual route, the metric defaults internally to "-1".
That is indicated in the TUI as empty entry. We must allow that as
valid configuration.
No reason to, the other types are no less likely. Quite the contrary, if
the user specifies a GSM APN we're sure to use a DUN profile.
$ ./clients/cli/nmcli c add type bluetooth ifname '*' bluetooth.bdaddr 1C:E2:CC:56:6C:45 apn internet
$ nmcli c show bluetooth-1 |grep bluetooth.type
bluetooth.type: panu
^^^^ not cool
Unbreaks Bluetooth DUN. Probably broken with the nm-meta-setting-desc
refactor, hence the Fixes tag. I didn't actually check.
$ nmcli c add type bluetooth ifname '*' bluetooth.bdaddr 1C:E2:CC:56:6C:45 connection.id bt bt-type dun-gsm
Error: 'apn' argument is required.
$ nmcli c add type bluetooth ifname '*' bluetooth.bdaddr 1C:E2:CC:56:6C:45 connection.id bt bt-type dun-gsm apn internet
Error: invalid <setting>.<property> 'apn'.
$
This is where it starts to get sad ^
$ nmcli c add type bluetooth ifname '*' bluetooth.bdaddr 1C:E2:CC:56:6C:45 connection.id bt bt-type dun-gsm gsm.apn internet
Error: invalid or not allowed setting 'gsm': 'gsm' not among [connection, bluetooth, bridge, ipv4, ipv6, proxy].
$
This is where it gets obvious what went wrong ^
Fixes: b5c8622ad3
When the property is set, it specifies the device on which PPPoE is to
be started. The ppp interface will be named as the
connection.interface-name property.
When the property is not set the previous behavior will be retained,
i.e. the PPPoE connection will be started on connection.interface-name
and the PPP interface will have a random name.
Software devices don't have a permanent hardware address and thus it
doesn't make sense to enforce the 'fake' (generated) permanent one
when cloned-mac-address=permanent. Also, setting the fake permanent
address on bond devices, prevents them from inheriting the first slave
hardware address, so let's just skip the setting of MAC when
cloned-mac-address=permanent and there is no real permanent address.
https://bugzilla.redhat.com/show_bug.cgi?id=1472965
As far as NetworkManager is concerned, the "connection.id" (also called
"con-name" in nmcli) is a pretty name and does not need to be unique.
UI components usually show the "connection.id" instead of the
"connection.uuid" identifier. It is hence likely, that the user
would not intentionally re-use the same name for multiple connection
profiles.
Print a warning to stderr when the user adds such a connection.
This only affects `nmcli connection add` and `nmcli connection import`,
but not `nmcli connection clone` and not interactive edit mode.
https://bugzilla.redhat.com/show_bug.cgi?id=1460796
Currently nmcli considers the state of the device associated to a
connection to determine the success of an activation; for VPNs the
device is the parent interface on which the VPN is established.
This means that VPNs on bond/bridge/team interfaces are reported as
connected immediately because of the special handling of master
devices state in check_activated().
The parent device state is not meaningful for VPNs, so don't track it.
For consistency, never return an empty array @values.
If we have an empty array, instead return NULL.
Also fixes commit afac7621a "clients: return NULL array on
auto-completion failure", which claims that readline crashes
with empty strv arrays.
Fixes: afac7621ae
$ nmcli --complete-args connection import type non-existing-<TAB>
Leads to a double-free of out_to_free, as we call g_free(v) in
nm_meta_abstract_info_complete().
Also fix a memleak when skipping over non-matching values.
Fixes: afac7621ae
Since properties are asked only when the connection has the related
setting, ensure that the connection type is set early so that the base
type gets added to the connection before evaluating other settings.
After NMSettingConnection properties, ask properties for the base
setting and then all other settings.
The order matters for the 'nmcli connection show' output and for the
interactive mode of nmcli. Users should not rely on the order in both
cases, but since we have an extensive test suite for the interactive
mode, restore the order as it was in 1.8.
The INT signal can arrive after a new line has been processed in
nmc_readline_helper(). In such case, the handler gets uninstalled by
readline_cb() and nmc_seen_sigint() returns TRUE. However it's an
error to call rl_callback_read_char() without handler, don't do it.
Fixes the following:
"readline: readline_callback_read_char() called with no handler!"
#0 __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
#1 __GI_abort () at abort.c:90
#2 rl_callback_read_char () at ../callback.c:116
#3 nmc_readline_helper (prompt=prompt@entry=0x2aa0d229080 "nmcli> ") at clients/cli/common.c:1387
#4 nmc_readline (prompt_fmt=prompt_fmt@entry=0x2aa0036ac9e "%s") at clients/cli/common.c:1448
#5 do_connection_edit (connection=0x2aa0d215440, nmc=0x2aa00391298 <nm_cli>) at clients/cli/connections.c:7072
Fixes: 995229181chttps://bugzilla.redhat.com/show_bug.cgi?id=1458311
When running one of:
nmcli device wifi list ifname wlan0
nmcli device wifi connect ... ifname wlan0
nmcli wrongly adds the device name to the output.
Do the completion only when requested.
Fixes: 8679793f6b
Fixes: 1a0dfd31c4
nmcli closes its stdout when spawning the pager and thus, in editor
mode, nothing is printed once the pager terminates. For an interactive
mode like the editor, the pager seems not suitable, disable it.
Fixes: 24c079e4b2
Branch f9b1bc16e9 added bluetooth NAP
support. A NAP connection is of connection.type "bluetooth", but it
also has a "bridge" setting. Also, it is primarily handled by NMDeviceBridge
and NMBridgeDeviceFactory (with help from NMBluezManager).
However, don't let nm_connection_get_connection_type() and
nm_connnection_is_type() lie about what the connection.type is.
The type is "bluetooth" for most purposes -- at least, as far as
the client is concerned (and the public API of libnm). This restores
previous API behavior, where nm_connection_get_connection_type()
and nm_connection_is_type() would be simple accessors to the
"connection.type" property.
Only a few places care about the bridge aspect, and those places need special
treatment. For example NMDeviceBridge needs to be fully aware that it can
handle bluetooth NAP connection. That is nothing new: if you handle a
connection of any type, you must know which fields matter and what they
mean. It's not enough that nm_connection_get_connection_type() for bluetooth
NAP connectins is claiming to be a bridge.
Counter examples, where the original behavior is right:
src/nm-manager.c- g_set_error (error,
src/nm-manager.c- NM_MANAGER_ERROR,
src/nm-manager.c- NM_MANAGER_ERROR_FAILED,
src/nm-manager.c- "NetworkManager plugin for '%s' unavailable",
src/nm-manager.c: nm_connection_get_connection_type (connection));
the correct message is: "no bluetooth plugin available", not "bridge".
src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-writer.c: if ( ( nm_connection_is_type (connection, NM_SETTING_WIRED_SETTING_NAME)
src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-writer.c: && !nm_connection_get_setting_pppoe (connection))
src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-writer.c: || nm_connection_is_type (connection, NM_SETTING_VLAN_SETTING_NAME)
src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-writer.c: || nm_connection_is_type (connection, NM_SETTING_WIRELESS_SETTING_NAME)
src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-writer.c: || nm_connection_is_type (connection, NM_SETTING_INFINIBAND_SETTING_NAME)
src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-writer.c: || nm_connection_is_type (connection, NM_SETTING_BOND_SETTING_NAME)
src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-writer.c: || nm_connection_is_type (connection, NM_SETTING_TEAM_SETTING_NAME)
src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-writer.c: || nm_connection_is_type (connection, NM_SETTING_BRIDGE_SETTING_NAME))
src/settings/plugins/ifcfg-rh/nms-ifcfg-rh-writer.c- return TRUE;
the correct behavior is for ifcfg-rh plugin to reject bluetooth NAP
connections, not proceed and store it.
This is useful because bond gets its mac from first slave and order of
slave attachement is not guaranteed.
For example if we have bond with wifi and ethernet we want mac from
wifi to be use by bond interface because many wifi defices do now
allow one to send data with spoofed macs.
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Ethernet settings for VLAN are always created later in settings
normalization. We might as well always created them.
This fixes a user visible problem: currently if user specifies cloned
mac when connection is created this value doesn't get saved. User has
to go, edit saved connection to add it again.
Similar problem existed for wireless security and wifi
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
In the previous code it is not clear to me that there won't be
a situation where we don't react on a state change, waiting for a
device-state-change that never comes.
Now, only wait for a better device-state reason if:
- we have a device
- and the ac-reason is unspecific (NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_DISCONNECTED)
- and the device still references the current active connection
- and the device state is not yet FAILED or DISCONNECTED.
The most important change is that we only wait longer, if the device's
active-connection is still the same as our current active connection.
I don't think this commit is really necessary, but I cannot understand
the previous logic.
See-also: 57a26fd2aa
This way, we get tab completion for the enum values, and
can reuse existing code.
This requires a pre-set-notify hook, that is invoked before
setting the property.
