When we decide to add a new link, we alredy checked that no such link exists
(ignoring race conditions).
It is wrong to accept a EXITS failure when adding the link. There is no guarantee
that the existing link has all the same properties as the one we intend to add.
More importantly, this link was added externally outside of NetworkManager and it
should not be taken over.
Just treat EXISTS as a failure as any other.
Link related functions should have a "nm_platform_link" prefix. Rename.
Naming is a subjective matter and one might argue that omitting
the "link" part from the name is shorter and even preferred.
However, I think functions related to links should have a common
prefix as the underlyings are strongly related.
Let the link-add functions return the internal pointer to the platform
link object. Similar to link-get, which doesn't copy the link either.
Also adjust the sole users of the add-functions (create-and-realize)
to take the pointer.
Eventually we still copy the returned data, because accessing platform can
invalidate the returned pointer. Thus we don't actually safe any copying
by this (at least every use of the function currently leads to the data
being copied).
Still change it, because I think the API of NMPlatform should look like that.
Ensure the platform link with the same interface name as the
NMDevice is actually compatible with it before using the link
for initialization of device properties. If not, remove the
NMDevice and create a new one since there are kernel resources
with a different type.
Unrealized devices aren't backed by kernel resources and so won't know
all of their attributes. That means three things:
1) they must update their attributes when they become realized
2) they must clear those attributes when unrealized
3) they must be looser in checking compatible connections until
they are realized
This requires that the setup() function be split into two parts, start & finish,
because finish must be run after add_device()
Also, we can simplify whether to pay attention to 'recheck-assume', which
is now dependent on priv->is_nm_owned, because the only case where NM should
*not* listen for the 'recheck-assume' signal is when the device is a
software device created by NM itself. That logic was previously spread
across the callers of add_device() but is now consolidated into
nm-manager.c::device_realized() and nm-device.c::nm_device_create_and_realize().
We already have nm_platform_tun_get_properties(). Rename the function
as they both sidestep the platform cache to lookup some link-specific
properties.
Clone the connection upon activation. This makes it safe for the user
to modify the original connection while it is activated.
This involves several changes:
- NMActiveConnection gets @settings_connection and @applied_connection.
To support add-and-activate, we constructing a NMActiveConnection with
no connection set. Previously, we would set the "connection" field to
a temporary NMConnection. Now NMManager piggybacks this temporary
connection as object-data (TAG_ACTIVE_CONNETION_ADD_AND_ACTIVATE).
- get rid of the functions nm_active_connection_get_connection_type()
and nm_active_connection_get_connection_uuid(). From their names
it is unclear whether this returns the settings or applied connection.
The (few) callers should figure that out themselves.
- rename nm_active_connection_get_id() to
nm_active_connection_get_settings_connection_id(). This function
is only used internally for logging.
- dispatcher calls now get two connections as well. The
applied-connection is used for the connection data, while
the settings-connection is used for the connection path.
- needs special handling for properties that apply immediately
when changed (nm_device_reapply_settings_immediately()).
Co-Authored-By: Thomas Haller <thaller@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=724041
The parent of a link (IFLA_LINK) can be in another network namespace and
thus invisible to NM.
This requires the netlink attribute IFLA_LINK_NETNSID which is supported
by recent versions of kernel and libnl.
In this case, set the parent field to NM_PLATFORM_LINK_OTHER_NETNS
and properly handle this special case.
It might just be that we didn't see it yet; either on daemon startup on in a
race. The nm_platform_*_add() deals with the device already being there in
_link_add_check_existing().
NetworkManager:ERROR:devices/nm-device-bridge.c:402:create_and_realize: assertion failed: (nm_device_get_ifindex (device) <= 0)
Program received signal SIGABRT, Aborted.
0x00007ffff46965d7 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
Missing separate debuginfos, use: debuginfo-install bluez-libs-5.23-4.el7.x86_64
(gdb) bt
#0 0x00007ffff46965d7 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
#1 0x00007ffff4697cc8 in __GI_abort () at abort.c:90
#2 0x00007ffff4a916d5 in g_assertion_message (domain=domain@entry=0x5a5088 "NetworkManager", file=file@entry=0x59b0f2 "devices/nm-device-bridge.c", line=line@entry=402, func=func@entry=0x59b3f0 <__FUNCTION__.29169> "create_and_realize", message=message@entry=0xa76a30 "assertion failed: (nm_device_get_ifindex (device) <= 0)") at gtestutils.c:2292
#3 0x00007ffff4a9176a in g_assertion_message_expr (domain=domain@entry=0x5a5088 "NetworkManager", file=file@entry=0x59b0f2 "devices/nm-device-bridge.c", line=line@entry=402, func=func@entry=0x59b3f0 <__FUNCTION__.29169> "create_and_realize", expr=expr@entry=0x59aef8 "nm_device_get_ifindex (device) <= 0") at gtestutils.c:2307
#4 0x0000000000447cb6 in create_and_realize (device=0xa77f40 [NMDeviceBridge], connection=0x8d0200, parent=<optimized out>, out_plink=0x7fffffffd700, error=0x0) at devices/nm-device-bridge.c:402
#5 0x000000000045d560 in nm_device_create_and_realize (self=self@entry=0xa77f40 [NMDeviceBridge], connection=connection@entry=0x8d0200, parent=<optimized out>, error=error@entry=0x0)
at devices/nm-device.c:1594
#6 0x00000000004d4b64 in system_create_virtual_device (self=self@entry=0x8802b0 [NMManager], connection=connection@entry=0x8d0200, error=error@entry=0x0) at nm-manager.c:983
#7 0x00000000004d4d71 in system_create_virtual_devices (self=0x8802b0 [NMManager]) at nm-manager.c:1022
#8 0x00000000004d47a5 in add_device (self=<optimized out>, device=<optimized out>, try_assume=<optimized out>) at nm-manager.c:1785
#9 0x00000000004d501f in platform_link_added (self=self@entry=0x8802b0 [NMManager], ifindex=<optimized out>, plink=plink@entry=0xa7f810) at nm-manager.c:1887
#10 0x00000000004d7c24 in nm_manager_start (self=0x8802b0 [NMManager]) at nm-manager.c:1959
#11 0x00000000004d7c24 in nm_manager_start (self=self@entry=0x8802b0 [NMManager], error=error@entry=0x7fffffffd930) at nm-manager.c:4178
#12 0x00000000004459ec in main (argc=1, argv=0x7fffffffda88) at main.c:442
(gdb)
The localization headers are now included via "nm-default.h".
Also fixes several places, where we wrongly included <glib/gi18n-lib.h>
instead of <glib/gi18n.h>. For example under "clients/" directory.
Future patches will create devices long before they are backed by
kernel resources, so we need to split NMDevice object creation from
actual setup based on the backing resources.
This patch combines the NMDeviceFactory's new_link() and
create_virtual_device_for_connection() class methods into a single
create_device() method that simply creates an unrealized NMDevice
object; this method is not expected to fail unless the device is
supposed to be ignored. This also means that the NMDevice
'platform-device' property is removed, because a platform link
object may not be available at NMDevice object creation time.
After the device is created, it is then "realized" at some later
time from a platform link (for existing/hardware devices via the
realize() method) or from an NMConnection (for newly created software
devices via the create_and_realize() NMDeviceClass methods).
https://bugzilla.gnome.org/show_bug.cgi?id=737458
Add NMExportedObject, make it the base class of all D-Bus-exported
types, and move the nm-properties-changed-signal logic into it. (Also,
make NMSettings use the same properties-changed code as everything
else, which it was not previously doing, presumably for historical
reasons).
(This is mostly just shuffling code around at this point, but
NMExportedObject will be more important in the gdbus port, since
gdbus-codegen doesn't do a very good job of supporting objects that
export multiple interfaces [as each NMDevice subclass does, for
example], so we will need more glue/helper code in NMExportedObject
then.)
Rather than randomly including one or more of <glib.h>,
<glib-object.h>, and <gio/gio.h> everywhere (and forgetting to include
"nm-glib-compat.h" most of the time), rename nm-glib-compat.h to
nm-glib.h, include <gio/gio.h> from there, and then change all .c
files in NM to include "nm-glib.h" rather than including the glib
headers directly.
(Public headers files still have to include the real glib headers,
since nm-glib.h isn't installed...)
Also, remove glib includes from header files that are already
including a base object header file (which must itself already include
the glib headers).
Later remove nm_platform_get_error() and signal errors via return
error codes.
Also, fix nm_platform_infiniband_partition_add() and
nm_platform_vlan_add() to check the type of the existing link
and fail with WRONG_TYPE otherwise.
We need to know whether we can create interfaces of any given
NMDevice subclass or not. So don't rely on just the NMPlatformLink
for that information, because we won't have a platform link for
software devices before we create them.
Instead of hacky stuff in the Manager, let plugins themselves indicate
which links should be ignored (because they are really child links that
are controlled by a different device that the plugin handles).
Instead of having a bunch of logic in the Manager for determining the
VLAN and Infiniband virtual interface names, move the type-specific
logic into the plugins themselves.
Instead of looping over all plugins and asking each plugin whether it
can handle a link or a connection, have them advertise the link and
connection types they support, and use that when creating new devices.
Most nm_platform_*() functions operate on the platform
singleton nm_platform_get(). That made sense because the
NMPlatform instance was mainly to hook fake platform for
testing.
While the implicit argument saved some typing, I think explicit is
better. Especially, because NMPlatform could become a more usable
object then just a hook for testing.
With this change, NMPlatform instances can be used individually, not
only as a singleton instance.
Before this change, the constructor of NMLinuxPlatform could not
call any nm_platform_*() functions because the singleton was not
yet initialized. We could only instantiate an incomplete instance,
register it via nm_platform_setup(), and then complete initialization
via singleton->setup().
With this change, we can create and fully initialize NMPlatform instances
before/without setting them up them as singleton.
Also, currently there is no clear distinction between functions
that operate on the NMPlatform instance, and functions that can
be used stand-alone (e.g. nm_platform_ip4_address_to_string()).
The latter can not be mocked for testing. With this change, the
distinction becomes obvious. That is also useful because it becomes
clearer which functions make use of the platform cache and which not.
Inside nm-linux-platform.c, continue the pattern that the
self instance is named @platform. That makes sense because
its type is NMPlatform, and not NMLinuxPlatform what we
would expect from a paramter named @self.
This is a major diff that causes some pain when rebasing. Try
to rebase to the parent commit of this commit as a first step.
Then rebase on top of this commit using merge-strategy "ours".
Add nm-core-types.h, typedefing all of the GObject types in
libnm-core; this is needed so that nm-setting.h can reference
NMConnection in addition to nm-connection.h referencing NMSetting.
Removing the cross-includes from the various headers causes lots of
fallout elsewhere. (In particular, nm-utils.h used to include
nm-connection.h, which included every setting header, so any file that
included nm-utils.h automatically got most of the rest of libnm-core
without needing to pay attention to specifics.) Fix this up by
including nm-core-internal.h from those files that are now missing
includes.
Most NMDevice types defined their own error domain but then never used
it. A few did use their errors, but some of those errors are redundant
with NMDeviceError, and others can be added to it.
Each setting type was defining its own error type, but most of them
had exactly the same three errors ("unknown", "missing property", and
"invalid property"), and none of the other values was of much use
programmatically anyway.
So, this commit merges NMSettingError, NMSettingAdslError, etc, all
into NMConnectionError. (The reason for merging into NMConnectionError
rather than NMSettingError is that we also already have
"NMSettingsError", for errors related to the settings service, so
"NMConnectionError" is a less-confusable name for settings/connection
errors than "NMSettingError".)
Also, make sure that all of the affected error messages are localized,
and (where appropriate) prefix them with the relevant property name.
Renamed error codes:
NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND
NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET
Remapped error codes:
NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING
NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY
Dropped error codes (were previously defined but unused):
NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED
NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED
NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING
NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING
NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
Make all mac-address properties (including NMSettingBluetooth:bdaddr,
NMSettingOlpcMesh:dhcp-anycast-addr, and NMSettingWireless:bssid) be
strings, using _nm_setting_class_transform_property() to handle
translating to/from binary form when dealing with D-Bus.
Update everything accordingly for the change, and also add a test for
transformed setting properties to test-general.
NMDeviceBond, NMDeviceBridge, and NMDeviceTeam all used basically the
same code to generate a default interface name. Move it into
nm_utils_complete_generic().
Since we enforce the fact that bond, bridge, team, and vlan
interface-name properties match NMSettingConnection:interface-name,
nm_connection_get_virtual_iface_name() can be replaced with
nm_connection_get_interface_name() basically everywhere.
The one place this doesn't work is with InfiniBand partitions (where
get_virtual_iface_name() was actually computing the name), but for the
most part we only need to care about the interface names of InfiniBand
partitions in places where we also already need to do some other
InfiniBand-specific handling as well, so we can use an
InfiniBand-specific method
(nm_setting_infiniband_get_virtual_interface_name()) to get it.
(Also, while updating nm_device_get_virtual_device_description(), fix
it to handle InfiniBand partitions too.)
For NMDeviceWifi and NMDeviceWimax, the printf format string for
nm_utils_complete_generic() was created based on ssid/nsp. Since
these input strings are untrusted, this is a serious bug.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Now that we have nm_utils_hwaddr_matches() for comparing addresses
(even when one is a string and the other binary), there are now places
where it's more convenient to store hardware addresses as strings
rather than binary, since we want them in string form for most
non-comparison purposes. So update for that.
In particular, this also changes nm_device_get_hw_address() to return
a string.
Also, simplify the update_permanent_hw_address() implementations by
assuming that they will only be called once. (Since they will.)
Add nm_utils_hwaddr_matches(), for comparing hardware addresses for
equality, allowing either binary or ASCII hardware addresses to be
passed, and handling the special rules for InfiniBand hardware
addresses automatically. Update code to use it.
Include <linux/if_ether.h> and <linux/if_infiniband.h> from
nm-utils.h, to get ETH_ALEN and INFINIBAND_ALEN, and remove those
includes (as well as <net/ethernet.h> and <netinet/ether.h>, and
various headers that had been included to get the ARPHRD_* constants)
from other files where they're not needed now.
Drop the arptype-based nm_utils_hwaddr funcs, and rename the
length-based ones to no longer have _len in their names. This also
switches nm_utils_hwaddr_atoba() to using a length rather than an
arptype, and adds a length argument to nm_utils_hwaddr_valid() (making
nm_utils_hwaddr_valid() now a replacement for nm_utils_hwaddr_aton()
in some places, where we were only using aton() to do validity
checking).
Clean up some of the cross-includes between headers (which made it so
that, eg, if you included NetworkManagerUtils.h in a test program, you
would need to build the test with -I$(top_srcdir)/src/platform, and if
you included nm-device.h you'd need $(POLKIT_CFLAGS)) by moving all
GObject struct definitions for src/ and src/settings/ into nm-types.h
(which already existed to solve the NMDevice/NMActRequest circular
references).
Update various .c files to explicitly include the headers they used to
get implicitly, and remove some now-unnecessary -I options from
Makefiles.
These are (most likely) only warnings and not severe bugs.
Some of these changes are mostly made to get a clean run of
Coverity without any warnings.
Error found by running Coverity scan
https://bugzilla.redhat.com/show_bug.cgi?id=1025894
Co-Authored-By: Jiří Klimeš <jklimes@redhat.com>
Signed-off-by: Thomas Haller <thaller@redhat.com>
