* libnm-glib/Makefile.am: Use nm-manager-client.xml to produce
* nm-client-bindings.
* introspection/nm-manager-client.xml: Add a horrible horrbile
* hack to work around
an issue with dbus-glib bindings generator. The issue is, the
generated C caller
functions for dbus methods "Sleep(bool)" and "sleep()" both have
the same function
name and different arguments and it won't compile anymore. To
fix this, we now have
two copies of nm-manager.xml file. nm-manager.xml contains the
actual interface,
that is new API + compatibility API and used by the daemon. The
other,
nm-manager-client.xml is only the new API without compatibility
bits and is used
by libnm-glib to make it compile.
* introspection/nm-manager.xml: Define compatibility methods
* (sleep, wake, state).
* src/nm-manager.c (impl_manager_legacy_sleep)
(impl_manager_legacy_wake, impl_manager_legacy_state): Implement
the compatibility
interface functions for 0.6 branch.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2688 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
(force-commit to fix wrong comment and partial commit of r2685; this
commit actually applies to r2685)
* src/NetworkManagerUtils.c
- (nm_utils_same_ssid): add "ignore_trailing_null" parameter which
ignores trailing nulls in the SSID to work around mismatches in
expectations between WEXT and what the info-daemon passes back. The
info-daemon would pass back the correct length, but due to the
ESSID length issues with WEXT 22 and greater and wpa_supplicant,
the device would always have an SSID + 1 depending on what versions
of wpa_supplicant, the kernel, and NM you have. This was most often
visible by just quitting the applet and relaunching, which caused
NM to reassociated to the same network over again when reloading
the save networks.
* src/NetworkManagerPolicy.c
src/NetworkManagerUtils.h
src/nm-device-802-11-wireless.c
- Update for new parameter to nm_utils_same_ssid()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2686 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.c
- (nm_ap_new_from_properties): ignore BSSs with invalid BSSIDs. Today
I encountered a BSS that wasn't just hiding it's ESSID, it was
setting the BSSID to all 0s. That confused the heck out of NM,
plus it's useless and probably out-of-spec.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2684 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/dhcp-manager/nm-dhcp-manager.c
- (dhclient_run): don't pass -x to dhclient until we figure out if
it's really needed, get rid of unused xtra_args parameter
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2681 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManagerVPN.h
src/vpn-manager/nm-dbus-vpn.c
src/vpn-manager/nm-dbus-vpn.h
src/vpn-manager/nm-vpn-act-request.c
src/vpn-manager/nm-vpn-act-request.h
src/vpn-manager/nm-vpn-service.c
src/vpn-manager/nm-vpn-service.h
libnm-glib/nm-vpn-connection.c
libnm-glib/nm-vpn-connection.h
libnm-glib/nm-client.h
- Rename NM_VPN_STATE_* -> NM_VPN_SERVICE_STATE_* and NMVPNState ->
NMVPNServiceState to clarify what they apply to
- Rename NM_VPN_ACT_STAGE_* -> NM_VPN_CONNECTION_STATE_* and
NMVPNActStage -> NMVPNConnectionState for the same reason
* libnm-glib/nm-client.c
- Constant + type renames from above
- Properly handle NameOwnerChanged/manager_running signals
for NM service; only emit when state really changes
- Use hash tables correctly so that the key (which was previously owned
by the D-Bus message) now has the same lifetime as the value, since
the key is now taken from the the NMVPNConnection itself. This
really fixes the double-VPN names in the applet
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2677 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-client.c
- Convert internal VPN connection tracking from a list to a hash table
to easily avoid duplicates
- (nm_client_get_vpn_connections): now returns an allocated GSList that
must be freed by the caller, like nm_client_get_devices()
- (nm_client_remove_vpn_connection): don't let the removal signal
leak through for NMVPNConnection objects that aren't actually
tracked.
- (manager_running): throw away VPN connection list when NM goes away,
like with the device list
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2675 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/dhcp-manager/nm-dhcp-manager.c
- Stop any dhclient instance that might be already running for a
particular interface before starting an NM spawned dhclient. Fixes
dhclient processes left over if NM crashes, stuff like that.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2674 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.c
- (finalize): don't try to g_array_free (NULL, ...), which happened
when the AP wasn't broadcasting it's SSID
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2673 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h: added DBus path for connection settings.
* libnm-glib/nm-settings.[ch] (nm_settings_signal_new_connection,
nm_connection_settings_signal_updated,
nm_connection_settings_signal_removed): new functions to wrap the
objects' signals.
(nm_connection_settings_init): register GObject with DBus.
(nm_connection_settings_get_dbus_object_path): new function.
* libnm-glib/Makefile.am: added libnmutil to link flags.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2672 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/*: Remove. The nm-vpn-properties directory is now part
* of nm-applet,
libnm_glib directory got merged with libnm-glib/.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2670 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/libnm-glib.pc.in: Rename to libnm_glib.pc.in.
* libnm-glib/Makefile.am: Add legacy libnm_glib.[ch] to the
* build.
Rename the library from libnm-glib to libnm_glib to maintain the
library API
compatibility with 0.6 branch.
* Makefile.am: Remove gnome/ SUBDIR.
* gnome/libnm_glib/libnm_glib.[ch]: Move to libnm-glib/.
* src/Makefile.am: Remove the WPA_SUPPLICANT_BIN define.
* dispatcher-daemon/Makefile.am: Link the binary with
* libnm_glib.
* configure.in: Remove GNOME checks, NetworkManager does not
* need any of these
anymore.
Remove checks for wpa_supplicant binary, it's used over dbus.
Remove gnome/ directory files form AC_OUTPUT, that directory is
getting moved.
* test/Makefile.am: Remove define WPA_SUPPLICANT_BIN.
Link the binaries with libnm_glib.la.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2669 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (nm_policy_device_change_check): fix policy to deactivate old device
before activating new one, at least until the multiple active
device support lands
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2668 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Kill dhcdbd until it's dead, dead, dead. Based on a patch from
Robert Frank <rfrank@redhat.com>
* src/dhcp-manager/nm-dhcp-manager.c
src/dhcp-manager/nm-dhcp-manager.c
src/nm-device.c
- Spawn and communicate with dhclient directly, through means of a
custom dhclient callout script. Process callout D-Bus signals
with dbus-glib instead of hand-rolled dbus. DHCP timeouts are now
sent via gobject signals rather than being driven by the dhcp manager
directly.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2666 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Makefile.am
configure.in
callouts/Makefile.am
callouts/nm-dhcp-client-action.c
callouts/nm-dhcp-client.conf
- Add dhclient-executed callout that takes the place of dhclient-script
and dhcdbd, pushing DHCP options out to the system bus as a signal that
NM then listens for
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2664 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
[Based on patch by Helmut Schaa <hschaa@suse.de>]
* libnm-glib/nm-client.h:
* libnm-glib/nm-object.h:
* libnm-glib/nm-vpn-connection.h:
* libnm-glib/nm-settings.h:
* libnm-glib/nm-device.h:
* libnm-glib/nm-ip4-config.h:
* libnm-glib/nm-access-point.h:
* libnm-glib/nm-device-802-3-ethernet.h:
* libnm-util/nm-setting.h:
* libnm-util/nm-connection.h: Add G_BEGIN_DECLS / G_END_DECLS to
* support C++.
* libnm-glib/nm-object.c (nm_object_get_byte_property):
* Implement.
* libnm-glib/nm-access-point.c: Strength has type char.
* gnome/vpn-properties/Makefile.am: Remove
* GNOME_DISABLE_DEPRECTATED for now
to fix build. GnomeDruid is deprecated in recent libgnomeui.
* introspection/nm-access-point.xml: Strength property is char,
* not int.
* src/NetworkManagerAP.c (set_property): Set strength from char.
(get_property): Handle hidden APs (with empty SSID).
Get strength value from char.
(nm_ap_class_init): Strength property has char type.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2659 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Bernhard Miklautz <bernhard.miklautz@shacknet.at>
* src/NetworkManagerSystem.c
- (nm_system_device_set_ip4_route): don't add the route if it's on the
same subnet (#437396)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2651 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Robert Buchholz <rbu@gentoo.org>:
* configure.in:
* Makefile.am:
* introspection/Makefile.am:
Make make distcheck work again.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2628 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c (merge_scanned_ap): Don't advertise constantly
that we got a new AP when we just update existing AP properties.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2616 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/Makefile.am: Add NMObject to build, remove nm-utils.[ch].
* nm-utils.[ch]: Remove.
* libnm-glib/nm-object.c: Implement a base class for all libnm-glib dbus-aware
objects for easy property access and dbus connection handling.
* libnm-glib/nm-client.c: Derive from NMObject.
* libnm-glib/nm-device.c: Ditto.
* libnm-glib/nm-device-802-3-ethernet.c: Changes for being based on NMObject.
* libnm-glib/nm-device-802-11-wireless.c: Ditto.
* libnm-glib/nm-ip4-config.c: Ditto.
* libnm-glib/nm-access-point.c: Ditto.
* libnm-util/nm-connection.c (nm_connection_compare): Add a stub for connection
comparision. Currently used by the device activation code to determine if the new
activation is the same as the old one.
* src/nm-dbus-nmi.c (nm_dbus_get_user_key_for_network): Don't use the obsolete and
wrong way of getting the dbus path for AP. Fixes the issue where the applet isn't
able to ask password for the AP.
* src/nm-device.c (nm_device_activate): Change the logic here - instead of giving
up if the device is already connected, tear down it's connection (if it isn't the
same as new one) and start the activation.
* src/nm-manager.c: Add the beginnings of NMConnection storage and signals.
* src/NetworkManagerAP.c (nm_ap_init): Set the default values to AP memebers, fixes
the issue where all APs are always listed as encrypted.
* src/NetworkManagerDbus.c (nm_dbus_get_object_path_for_network): Remove. APs have
their own registered paths.
* test/nm-tool.c (detail_device): Don't try to get active network from wireless
device if it's not connected - dbus-glib will happily crash trying to marshal NULL.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2615 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c (nm_device_state_changed): Emit the signal before handling it
because the handling code will cause the next state change and signal listeners
get the signals in wrong order.
* src/NetworkManagerPolicy.c (nm_policy_device_change_check): Get the "old_dev"
correctly in case of pending activation.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2593 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Christian Persch <chpe@gnome.org>
* libnm-glib/Makefile.am:
* dispatcher-daemon/Makefile.am:
Use the correct variables, the correct paths, and correct ordering. (446315)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2588 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c: Make the activation stage virtual functions take NMDevice
argument. The activation request is easy to retrieve.
* src/nm-activation-request.c: Convert to GObject. Do not include half of NM headers
just to be a convenient location for devices to store random stuff.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2587 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Alex Smith <alex@alex-smith.me.uk>
* src/backends/NetworkManagerFrugalware.c:
Update the FrugalWare backend to fix a few segfaults. (#392642)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2585 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-setting.c: Get rid of dump virtual functions, that can happen
automagically.
Implement NMSettingIP4Config.
Finish NMSettingWired by adding all known members.
(setting_wired_verify): Implement.
Finish NMSettingWireless by adding all known members.
(setting_wireless_verify): Implement.
* libnm-util/nm-connection.c: Register "ipv4" setting.
(nm_connection_dump): Implement. Instead of requiring every NMSetting to implement
dump function, we can introspect the GHashTable which is used for sending connections
over dbus.
* src/nm-device-802-11-wireless.c (nm_device_802_11_wireless_set_activation_ap):
Take GByteArray for essid, it's really not a string.
* src/nm-device.c (real_act_stage3_ip_config_start): Get information from NMSettings.
Start DHCP request if setting is not passed or if it states that DHCP should be used.
(real_act_stage4_get_ip4_config): If settings are provided, use them, even if it
means overriding the values we got from DHCP.
(real_activation_cancel_handler): Cancel DHCP transaction only if it has started, doh.
(nm_device_deactivate_quickly): Ditto.
* src/nm-device-interface.c (impl_device_activate): Dump the connection structure
for debugging.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2577 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/Makefile.am: Link with libnm-util to gain access to
NMConnection.
* libnm-glib/nm-device-802-11-wireless.c:
(nm_device_802_3_ethernet_activate): Remove.
* libnm-glib/nm-device-802-3-ethernet.c
(nm_device_802_3_ethernet_activate): Remove.
* libnm-glib/nm-device.c (nm_device_activate): Implement.
* src/nm-device-802-3-ethernet.c: Implement the new activation using
NMConnection.
* src/nm-device-802-11-wireless.c: Store an activation AP once the
activation has started.
Implement the new activation using NMConnection.
* src/nm-activation-request.c: Store a generic connection object instead
of a wireless-specific AP.
* src/NetworkManagerPolicy.c (create_connection): Implement. Depending
on device type, create a device specific connection object suitable for
device activation.
* src/nm-device.c (nm_device_activate): Re-implement. Call the device
specific check to validate the connection and on success start the
activation.
* src/nm-device-interface.h: Add a activate virtual function to the
interface definition.
* src/nm-device-interface.c (nm_device_interface_activate): Implement.
(impl_device_activate): Implement.
* introspection/nm-device.xml: Add a generic device activation interface
that accepts an abstract NMConnection structure that has device-specific
information in it.
* introspection/nm-device-802-3-ethernet.xml: Remove the wired-specific
activation interface.
* introspection/nm-device-802-11-wireless.xml: Remove the wireless-specific
activation interface.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2569 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-dbus-manager.c
(proxy_name_owner_changed, nm_dbus_manager_class_init): Remove the
DbusConnection argument from 'name-owner-changed' signal. The manager
is already passed as a first argument to the signal and the connection
is easy enough to get from it.
* src/vpn-manager/nm-vpn-service.c (nm_vpn_service_name_owner_changed):
Update the signature of the function.
* src/vpn-manager/nm-vpn-manager.c (nm_name_owner_changed_handler):
Ditto.
* src/NetworkManager.c: Ditto.
* src/named-manager/nm-named-manager.c
(nm_named_manager_name_owner_changed): Ditto.
* src/supplicant-manager/nm-supplicant-manager.c
(nm_supplicant_manager_name_owner_changed): Ditto.
* src/nm-hal-manager.c (name_owner_changed): Ditto.
* src/dhcp-manager/nm-dhcp-manager.c
(nm_dhcp_manager_name_owner_changed): Ditto.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2567 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-hal-manager.c: Add a list of device detectors and creators
to make it easier to add new devices. Each device type has it's own
entry in the table so adding new device types is only a matter of
implementing a couple of functions, one for device detection and the
other for device creation.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2566 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/supplicant-manager/nm-supplicant-config.c (get_hash_cb): Marshal the
data to correct types instead of always using string.
* src/NetworkManagerAP.c (get_property): AP is encrypted if capabilities does
_not_ have NM_802_11_CAP_PROTO_NONE.
(foreach_property_cb): Set AP capabilities if it's not set or if the protocol
is not set.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2507 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-dbus-vpn.c (dbus_message_handler): Implement DBUS message
handler for VPN.
* src/vpn-manager/nm-vpn-manager.c (nm_vpn_manager_new): Register VPN interface
on DBUS again.
2007-03-26 Dan Williams <dcbw@redhat.com>
* src/NetworkManagerAPList.c
* src/nm-device-802-11-wireless.c
* src/NetworkManagerAP.c:
- Store last seen as glong instead of GTimeVal.
- Fix the upper bound of capabilities, it's a bitfield.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2500 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-device.c (nm_device_get_description): Implement.
* libnm-glib/nm-client.c (nm_client_manager_is_running): Implement. Also add a
"manager-running" signal that notifies the appearance/disappearance of NM.
(nm_client_sleep): Implement.
* libnm-glib/nm-device.c:
* libnm-glib/nm-device-802-11-wireless.c:
* libnm-glib/nm-device-802-3-ethernet.c:
Don't inherit from DBusGProxy, add a proxy to private
data. The reason is, classes inherited from NMDevice wouldn't get any dbus signals
for anything but their own dbus interface. DBusGProxy objects support only one
interfaces and to work around this, NMDevice has spearate proxy for each dbus
interface. The nice side effect of this change is that we do not create a new
DBusGProxy object for each property access.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2479 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c (constructor): Initialize the iw_ext structures
with zeroes before passing them to functions - the functions never do that and
reading the values back may produce wrong values.
(real_bring_up): Store the signal handler id ...
(real_bring_down): ... So that it can be removed here.
Disconnect the supplicant interface here as well.
(nm_device_802_11_wireless_ap_list_get_ap_by_obj_path): Use the dbus object path
from the access point instead of old $device/Networks/$essid.
* src/nm-manager.c (nm_manager_get_state): Return NM_STATE_CONNECTED when the
device state is connected (instead of just having link/carrier).
* src/nm-activation-request.c: Don't store NMData in activation request, it's
already easily accessible through the device.
* src/NetworkManagerAP.c (nm_ap_init): Construct the dbus object path here and
store it within the object.
(nm_ap_get_dbus_path): Export it to public as well.
* src/dhcp-manager/nm-dhcp-manager.c (nm_dhcp_manager_get): Keep the ownership
of the singleton.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2478 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Get rid of 2 second poll of sysfs 'carrier' file for wired devices. Useless
for non-carrier-detect capable devices, and useless for carrier-detect
devices since we get notifications from netlink about carrier status anyway.
* src/nm-device-802-3-ethernet.c
- remove 'link_source_id' member from private data
- (probe_link): remove and collapse into real_update_link()
- (nm_device_802_3_periodic_update): remove
- (real_is_up): check for sup_iface rather than link_source_id
- (real_bring_up): return gboolean for success/fail; require that
sup_iface be valid for device bringup to succeed
- (real_bring_down): zero out link signal ids
* src/nm-device.c
- (nm_device_activate_stage2_device_config): fail activation if device
bringup fails
- (real_act_stage4_get_ip4_config): fail activation if device bringup
fails
- (nm_device_bring_up): return success/fail
* src/nm-device.h
- bring_up now returns success/fail
* src/nm-device-802-11-wireless.c
- (real_bring_up): return success from bringup
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2464 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
