It seems to me the NM_DEVICE_CLASS_DECLARE_TYPES() macro confuses more
than helping. Let's explicitly initialize the two fields, albeit with
another helper macro NM_DEVICE_DEFINE_LINK_TYPES() to get the list of
link-types right.
For consistency, also leave nop-lines like
device_class->connection_type_supported = NULL;
device_class->link_types = NM_DEVICE_DEFINE_LINK_TYPES ();
because all NMDevice class init methods should have this same
boiler plate code and to make it explicit that this is intended.
And there are only 3 occurences where this actually comes into play.
NMDeviceOvsPort and NMDeviceOvsInterface don't have an underlying link-type from platform.
Still use NM_DEVICE_CLASS_DECLARE_TYPES() macro, for consistancy reasons.
This requires to extend NM_DEVICE_CLASS_DECLARE_TYPES() macro, to support
a variadic argument list with zero link-types.
Instead of returning a boolean @is_user_config value from
get_configured_mtu(), return an mtu-source enum with possible values
NONE,CONNECTION. This enum will be expanded later; for now there is no
change in behavior.
(cherry picked from commit 9f8b0697de)
We commonly only allow tabs at the beginning of a line, not
afterwards. The reason for this style is so that the code
looks formated right with tabstop=4 and tabstop=8.
If IPV6CP terminates before IPCP, pppd enters the RUNNING phase and we
start IP configuration without having an IP interface set, which
triggers assertions.
Instead, add a SetIfindex() D-Bus method that gets called by the
plugin when pppd becomes RUNNING. The method sets the IP ifindex of
the device and starts IP configuration.
https://bugzilla.redhat.com/show_bug.cgi?id=1515829
Kernel does not allow setting the MTU of a VLAN larger
then the MTU of the underlying device. Hence, we might
initially fail to set a large MTU of the VLAN, but we
have to retry when the MTU of the parent changes.
https://bugzilla.redhat.com/show_bug.cgi?id=1414901
- cleanup data type and use guint32 consistently. We might want to
introduce a new "infinity" value. But since libnm's
NM_SETTING_IP_CONFIG_DHCP_TIMEOUT asserts against the range
0 - G_MAXINT32, we cannot express it as -1 anyway. So, infinity
will have the numerical value G_MAXINT32, hence guint32 is just
fine.
- make use of existing ipv6.dhcp-timeout setting and add global
default configuration in NetworkManager.conf
- instead of having subclasses call nm_device_set_dhcp_timeout(),
add a virtual function get_dhcp_timeout().
Previously when the interface created by pppd was already the one we
expected, we would rename it to itself and remove the device from the
manager. Don't do it.
Fixes: 6c3195931e
Add code to NMPppDevice to activate new-style PPPoE connections. This
is a bit tricky because we can't create the link as usual in
create_and_realize(). Instead, we create a device without ifindex and
start pppd in stage2; when pppd reports a new configuration, we rename
the platform link to the correct name and set the ifindex into the
device.
This mechanism is inherently racy, but there is no way to tell pppd to
create an arbitrary interface name.
Since commit 2b51d3967 "device: merge branch 'th/device-mtu-bgo777251'",
we always set the MTU for certain device types during activation. Even
if the MTU is neither specified via the connection nor other means, like
DHCP.
Revert that change. On activation, if nothing explicitly configures the
MTU, leave it unchanged. This is like what we do with ethernet's
cloned-mac-address, which has a default value "preserve".
So, as last resort the default value for MTU is now 0 (don't change),
instead of depending on the device type.
Note that you also can override the default value in global
configuration via NetworkManager.conf.
This behavior makes sense, because whenever NM actively resets the MTU,
it remembers the previous value and restores it when deactivating
the connection. That wasn't implemented before 2b51d3967, and the
MTU would depend on which connection was previously active. That
is no longer an issue as the MTU gets reset when deactivating.
https://bugzilla.redhat.com/show_bug.cgi?id=1460760
- no longer bother clearing .state and .reason when the .id
field is unset. The fields just don't matter and no user
accesses these fields when the glib source id is not set.
- unify logging and give them all a prefix "queue-state[%s, %s, %u]: ".
- drop nm_device_queued_state_peek(), it only had one caller,
thus inline the trivial check.
- make nm_device_queued_state_clear() a static function
queued_state_clear()
- rename queued_set_state() to queued_state_set().
This allows a user to restore the previous behavior where NetworkManager
would not reconfigure the MTU during device activation, if no MTU is
available (commit "22e8af6 device: set a per-device default MTU on
activation").
Well, not exactly. The previous behavior was to use per-connection
configuration, then DHCP provided value, or finally leave the MTU
unspecified.
Now, we prefer a per-connection configuration, followed by a global
connection default. If "ethernet.mtu=0", the MTU is left unspecified.
In absense of a global connection default, the value from DHCP is used
or finally a per-device-type default. That is effectively 1500 for most
types, except for infiniband where the MTU is still left unspecified.
Instead of overwriting ip4_config_pre_commit(), add a new function
get_mtu().
This also adds a default value in case there is no user-configuration.
This will allow us later to reset a default MTU based on the device
type.
- don't include "nm-default.h" in header files. Every source file must
include as first header "nm-default.h", thus our headers get the
default include already implicitly.
- we don't support compiling NetworkManager itself with a C++ compiler. Remove
G_BEGIN_DECLS/G_END_DECLS from internal headers. We do however support
users of libnm to use C++, thus they stay in public headers.
(cherry picked from commit f19aff8909)
Extend the "ethernet.cloned-mac-address" and "wifi.cloned-mac-address"
settings. Instead of specifying an explicit MAC address, the additional
special values "permanent", "preserve", "random", "random-bia", "stable" and
"stable-bia" are supported.
"permanent" means to use the permanent hardware address. Previously that
was the default if no explict cloned-mac-address was set. The default is
thus still "permanent", but it can be overwritten by global
configuration.
"preserve" means not to configure the MAC address when activating the
device. That was actually the default behavior before introducing MAC
address handling with commit 1b49f941a6.
"random" and "random-bia" use a randomized MAC address for each
connection. "stable" and "stable-bia" use a generated, stable
address based on some token. The "bia" suffix says to generate a
burned-in address. The stable method by default uses as token the
connection UUID, but the token can be explicitly choosen via
"stable:<TOKEN>" and "stable-bia:<TOKEN>".
On a D-Bus level, the "cloned-mac-address" is a bytestring and thus
cannot express the new forms. It is replaced by the new
"assigned-mac-address" field. For the GObject property, libnm's API,
nmcli, keyfile, etc. the old name "cloned-mac-address" is still used.
Deprecating the old field seems more complicated then just extending
the use of the existing "cloned-mac-address" field, although the name
doesn't match well with the extended meaning.
There is some overlap with the "wifi.mac-address-randomization" setting.
https://bugzilla.gnome.org/show_bug.cgi?id=705545https://bugzilla.gnome.org/show_bug.cgi?id=708820https://bugzilla.gnome.org/show_bug.cgi?id=758301
Instead of accessing the singleton getter nm_settings_get(), obtain
the settings instance from the device instance itself via
nm_device_get_settings().
Introduce the nm_device_ip_method_failed() function to check if the
failure of an IP method should cause the activation to fail, and use
it where appropriate.
http://bugzilla.gnome.org/show_bug.cgi?id=741347
Get rid of NM_UNMANAGED_DEFAULT and refine the interaction between
unmanaged flags, device state and managed property.
Previously, the NM_UNMANAGED_DEFAULT was special in that a device was
still considered managed if it had solely the NM_UNMANAGED_DEFAULT flag
set and its state was managed. Thus, whether the device (state) was managed,
depended on the device state too.
Now, a device is considered managed (or unmanaged) based on the unmanaged
flags and realization state alone. At the same time, the device state
directly corresponds to the managed property of the device. Of course,
while changing the unmanaged flags, that invariant is shortly violated
until the state transistion is complete.
Introduce more unmanaged flags whereas some of them are non-authorative.
For example, the EXTERNAL_DOWN flag has only effect as long as the user
didn't explicitly manage the device (NM_UNMANAGED_USER_EXPLICIT). In other
words, certain flags can render other flags ineffective. Whether the device
is considered managed depends on the flags but also at the explicitly unset flags.
In a way, this is similar to previous where NM_UNMANAGED_DEFAULT was ignored
(if no other flags were present).
Also, previously a device that was NM_UNMANAGED_DEFAULT and in disconnected
state would transition back to unmanaged. No longer do that. Once a device is
managed, it stays managed as long as the flags indicate it should be managed.
However, the user can also modify the unmanaged flags via the D-Bus API.
Also get rid or nm_device_finish_init(). That was previously called
by NMManager after add_device(). As we now realize devices (possibly
multiple times) this should be handled during realization.
https://bugzilla.gnome.org/show_bug.cgi?id=746566
Ensure the platform link with the same interface name as the
NMDevice is actually compatible with it before using the link
for initialization of device properties. If not, remove the
NMDevice and create a new one since there are kernel resources
with a different type.
Future patches will create devices long before they are backed by
kernel resources, so we need to split NMDevice object creation from
actual setup based on the backing resources.
This patch combines the NMDeviceFactory's new_link() and
create_virtual_device_for_connection() class methods into a single
create_device() method that simply creates an unrealized NMDevice
object; this method is not expected to fail unless the device is
supposed to be ignored. This also means that the NMDevice
'platform-device' property is removed, because a platform link
object may not be available at NMDevice object creation time.
After the device is created, it is then "realized" at some later
time from a platform link (for existing/hardware devices via the
realize() method) or from an NMConnection (for newly created software
devices via the create_and_realize() NMDeviceClass methods).
https://bugzilla.gnome.org/show_bug.cgi?id=737458
Configuration commit is an unsafe thing to do for assumed connections,
it can remove an externally added address we don't know about yet.
The device already has a link-local address; for an assumed connection
it's the reason we assumed the method=link-local in the first place.
Make all mac-address properties (including NMSettingBluetooth:bdaddr,
NMSettingOlpcMesh:dhcp-anycast-addr, and NMSettingWireless:bssid) be
strings, using _nm_setting_class_transform_property() to handle
translating to/from binary form when dealing with D-Bus.
Update everything accordingly for the change, and also add a test for
transformed setting properties to test-general.
Previously, src/nm-ip4-config.h, libnm/nm-ip4-config.h, and
libnm-glib/nm-ip4-config.h all used "NM_IP4_CONFIG_H" as an include
guard, which meant that nm-test-utils.h could not tell which of them
was being included (and so, eg, if you tried to include
nm-ip4-config.h in a libnm test, it would fail to compile because
nm-test-utils.h was referring to symbols in src/nm-ip4-config.h).
Fix this by changing the include guards in the non-API-stable parts of
the tree:
- libnm-glib/nm-ip4-config.h remains NM_IP4_CONFIG_H
- libnm/nm-ip4-config.h now uses __NM_IP4_CONFIG_H__
- src/nm-ip4-config.h now uses __NETWORKMANAGER_IP4_CONFIG_H__
And likewise for all other headers.
The two non-"nm"-prefixed headers, libnm/NetworkManager.h and
src/NetworkManagerUtils.h are now __NETWORKMANAGER_H__ and
__NETWORKMANAGER_UTILS_H__ respectively, which, while not entirely
consistent with the general scheme, do still mostly make sense in
isolation.
