When a WG connection is connecting to an IPv6 endpoint, configures a
default route, and firewalld is active with IPv6_rpfilter=yes, it never
handshakes and doesn't pass traffic. This is because firewalld has a
IPv6 reverse path filter which is discarding these packets.
Thus, we add some firewall rules whenever a WG connection is brought up
that ensure the conntrack mark and packet mark are copied over.
These rules are largely inspired by wg-quick:
https://git.zx2c4.com/wireguard-tools/tree/src/wg-quick/linux.bash?id=17c78d31c27a3c311a2ff42a881057753c6ef2a4#n221
"nm-glib" h contains compat wrappers for older glib versions. This file
used to be copied over to VPN plugins, to use the same compat code. It
was thus interesting to also have compat code for glib versions, that
were no longer supported by NetworkManager itself.
This was fine. But glib 2.42 is more than 8 years old. At this point,
there really is no need to support that, even if you copy the file out
of NetworkManager source tree.
Drop those compat wrappers.
G_TYPE_CHECK_INSTANCE_CAST() can trigger a "-Wcast-align":
src/core/devices/nm-device-macvlan.c: In function 'parent_changed_notify':
/usr/include/glib-2.0/gobject/gtype.h:2421:42: error: cast increases required alignment of target type [-Werror=cast-align]
2421 | # define _G_TYPE_CIC(ip, gt, ct) ((ct*) ip)
| ^
/usr/include/glib-2.0/gobject/gtype.h:501:66: note: in expansion of macro '_G_TYPE_CIC'
501 | #define G_TYPE_CHECK_INSTANCE_CAST(instance, g_type, c_type) (_G_TYPE_CIC ((instance), (g_type), c_type))
| ^~~~~~~~~~~
src/core/devices/nm-device-macvlan.h:13:6: note: in expansion of macro 'G_TYPE_CHECK_INSTANCE_CAST'
13 | (G_TYPE_CHECK_INSTANCE_CAST((obj), NM_TYPE_DEVICE_MACVLAN, NMDeviceMacvlan))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Avoid that by using _NM_G_TYPE_CHECK_INSTANCE_CAST().
This can only be done for our internal usages. The public headers
of libnm are not changed.
These variants provide additional nm_assert() checks, and are thus
preferable.
Note that we cannot just blindly replace &g_array_index() with
&nm_g_array_index(), because the latter would not allow getting a
pointer at index [arr->len]. That might be a valid (though uncommon)
usecase. The correct replacement of &g_array_index() is thus
nm_g_array_index_p().
I checked the code manually and replaced uses of nm_g_array_index_p()
with &nm_g_array_index(), if that was a safe thing to do. The latter
seems preferable, because it is familar to &g_array_index().
- name things related to `in_addr_t`, `struct in6_addr`, `NMIPAddr` as
`nm_ip4_addr_*()`, `nm_ip6_addr_*()`, `nm_ip_addr_*()`, respectively.
- we have a wrapper `nm_inet_ntop()` for `inet_ntop()`. This name
of our wrapper is chosen to be familiar with the libc underlying
function. With this, also name functions that are about string
representations of addresses `nm_inet_*()`, `nm_inet4_*()`,
`nm_inet6_*()`. For example, `nm_inet_parse_str()`,
`nm_inet_is_normalized()`.
<<<<
R() {
git grep -l "$1" | xargs sed -i "s/\<$1\>/$2/g"
}
R NM_CMP_DIRECT_IN4ADDR_SAME_PREFIX NM_CMP_DIRECT_IP4_ADDR_SAME_PREFIX
R NM_CMP_DIRECT_IN6ADDR_SAME_PREFIX NM_CMP_DIRECT_IP6_ADDR_SAME_PREFIX
R NM_UTILS_INET_ADDRSTRLEN NM_INET_ADDRSTRLEN
R _nm_utils_inet4_ntop nm_inet4_ntop
R _nm_utils_inet6_ntop nm_inet6_ntop
R _nm_utils_ip4_get_default_prefix nm_ip4_addr_get_default_prefix
R _nm_utils_ip4_get_default_prefix0 nm_ip4_addr_get_default_prefix0
R _nm_utils_ip4_netmask_to_prefix nm_ip4_addr_netmask_to_prefix
R _nm_utils_ip4_prefix_to_netmask nm_ip4_addr_netmask_from_prefix
R nm_utils_inet4_ntop_dup nm_inet4_ntop_dup
R nm_utils_inet6_ntop_dup nm_inet6_ntop_dup
R nm_utils_inet_ntop nm_inet_ntop
R nm_utils_inet_ntop_dup nm_inet_ntop_dup
R nm_utils_ip4_address_clear_host_address nm_ip4_addr_clear_host_address
R nm_utils_ip4_address_is_link_local nm_ip4_addr_is_link_local
R nm_utils_ip4_address_is_loopback nm_ip4_addr_is_loopback
R nm_utils_ip4_address_is_zeronet nm_ip4_addr_is_zeronet
R nm_utils_ip4_address_same_prefix nm_ip4_addr_same_prefix
R nm_utils_ip4_address_same_prefix_cmp nm_ip4_addr_same_prefix_cmp
R nm_utils_ip6_address_clear_host_address nm_ip6_addr_clear_host_address
R nm_utils_ip6_address_same_prefix nm_ip6_addr_same_prefix
R nm_utils_ip6_address_same_prefix_cmp nm_ip6_addr_same_prefix_cmp
R nm_utils_ip6_is_ula nm_ip6_addr_is_ula
R nm_utils_ip_address_same_prefix nm_ip_addr_same_prefix
R nm_utils_ip_address_same_prefix_cmp nm_ip_addr_same_prefix_cmp
R nm_utils_ip_is_site_local nm_ip_addr_is_site_local
R nm_utils_ipaddr_is_normalized nm_inet_is_normalized
R nm_utils_ipaddr_is_valid nm_inet_is_valid
R nm_utils_ipx_address_clear_host_address nm_ip_addr_clear_host_address
R nm_utils_parse_inaddr nm_inet_parse_str
R nm_utils_parse_inaddr_bin nm_inet_parse_bin
R nm_utils_parse_inaddr_bin_full nm_inet_parse_bin_full
R nm_utils_parse_inaddr_prefix nm_inet_parse_with_prefix_str
R nm_utils_parse_inaddr_prefix_bin nm_inet_parse_with_prefix_bin
R test_nm_utils_ip6_address_same_prefix test_nm_ip_addr_same_prefix
./contrib/scripts/nm-code-format.sh -F
We use clang-format for automatic formatting of our source files.
Since clang-format is actively maintained software, the actual
formatting depends on the used version of clang-format. That is
unfortunate and painful, but really unavoidable unless clang-format
would be strictly bug-compatible.
So the version that we must use is from the current Fedora release, which
is also tested by our gitlab-ci. Previously, we were using Fedora 34 with
clang-tools-extra-12.0.1-1.fc34.x86_64.
As Fedora 35 comes along, we need to update our formatting as Fedora 35
comes with version "13.0.0~rc1-1.fc35".
An alternative would be to freeze on version 12, but that has different
problems (like, it's cumbersome to rebuild clang 12 on Fedora 35 and it
would be cumbersome for our developers which are on Fedora 35 to use a
clang that they cannot easily install).
The (differently painful) solution is to reformat from time to time, as we
switch to a new Fedora (and thus clang) version.
Usually we would expect that such a reformatting brings minor changes.
But this time, the changes are huge. That is mentioned in the release
notes [1] as
Makes PointerAligment: Right working with AlignConsecutiveDeclarations. (Fixes https://llvm.org/PR27353)
[1] https://releases.llvm.org/13.0.0/tools/clang/docs/ReleaseNotes.html#clang-format
Completely rework IP configuration in the daemon. Use NML3Cfg as layer 3
manager for the IP configuration of an interface. Use NML3ConfigData as
pieces of configuration that the various components collect and
configure. NMDevice is managing most of the IP configuration at a higher
level, that is, it starts DHCP and other IP methods. Rework the state
handling there.
This is a huge rework of how NetworkManager daemon handles IP
configuration. Some fallout is to be expected.
It appears the patch deletes many lines of code. That is not accurate, because
you also have to count the files `src/core/nm-l3*`, which were unused previously.
Co-authored-by: Beniamino Galvani <bgalvani@redhat.com>
Use `_nm_connection_ensure_setting()` to eliminate the
duplicated codes. This function will retrieve the specific setting from
connection, if not found, create new one and attach to the connection.
Signed-off-by: Gris Ge <fge@redhat.com>
"libnm-core/" is rather complicated. It provides a static library that
is linked into libnm.so and NetworkManager. It also contains public
headers (like "nm-setting.h") which are part of public libnm API.
Then we have helper libraries ("libnm-core/nm-libnm-core-*/") which
only rely on public API of libnm-core, but are themself static
libraries that can be used by anybody who uses libnm-core. And
"libnm-core/nm-libnm-core-intern" is used by libnm-core itself.
Move "libnm-core/" to "src/". But also split it in different
directories so that they have a clearer purpose.
The goal is to have a flat directory hierarchy. The "src/libnm-core*/"
directories correspond to the different modules (static libraries and set
of headers that we have). We have different kinds of such modules because
of how we combine various code together. The directory layout now reflects
this.
We periodically re-resolve the DNS name for entpoints. Since WireGuard
has no concept of being connected, we want to eventually pick up
if the DNS name resolves to a different IP address.
However, on resolution failure, we will never clear the endpoint we
already have. Thus, resolving names can only give a better endpoint,
not remove an IP address entirely.
DNS names might do Round-Robin load distribution and the name of the
endpoint might resolve to multiple IP addresses. Improve to stick to
the IP address that we already have -- provided that the IP address
is still among the new resolution result. Otherwise, we continue to
pick the first IP address that was resolved.
(cherry picked from commit 98348ee539)
Currently "src/" mostly contains the source code of the daemon.
I say mostly, because that is not true, there are also the device,
settings, wwan, ppp plugins, the initrd generator, the pppd and dhcp
helper, and probably more.
Also we have source code under libnm-core/, libnm/, clients/, and
shared/ directories. That is all confusing.
We should have one "src" directory, that contains subdirectories. Those
subdirectories should contain individual parts (libraries or
applications), that possibly have dependencies on other subdirectories.
There should be a flat hierarchy of directories under src/, which
contains individual modules.
As the name "src/" is already taken, that prevents any sensible
restructuring of the code.
As a first step, move "src/" to "src/core/". This gives space to
reorganize the code better by moving individual components into "src/".
For inspiration, look at systemd's "src/" directory.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/743
2021-02-04 09:45:55 +01:00
Renamed from src/devices/nm-device-wireguard.c (Browse further)
