G_TYPE_CHECK_INSTANCE_CAST() can trigger a "-Wcast-align":
src/core/devices/nm-device-macvlan.c: In function 'parent_changed_notify':
/usr/include/glib-2.0/gobject/gtype.h:2421:42: error: cast increases required alignment of target type [-Werror=cast-align]
2421 | # define _G_TYPE_CIC(ip, gt, ct) ((ct*) ip)
| ^
/usr/include/glib-2.0/gobject/gtype.h:501:66: note: in expansion of macro '_G_TYPE_CIC'
501 | #define G_TYPE_CHECK_INSTANCE_CAST(instance, g_type, c_type) (_G_TYPE_CIC ((instance), (g_type), c_type))
| ^~~~~~~~~~~
src/core/devices/nm-device-macvlan.h:13:6: note: in expansion of macro 'G_TYPE_CHECK_INSTANCE_CAST'
13 | (G_TYPE_CHECK_INSTANCE_CAST((obj), NM_TYPE_DEVICE_MACVLAN, NMDeviceMacvlan))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Avoid that by using _NM_G_TYPE_CHECK_INSTANCE_CAST().
This can only be done for our internal usages. The public headers
of libnm are not changed.
NMSettingWired does not reject invalid flags. Filter them out in wake_on_lan_enable().
In practice, it makes no difference, the unknown flags were ignored anyway.
For a long time we have a function like nm_uuid_generate_from_strings().
This was recently reworked and renamed, but it preserved behavior. Preserving
behavior is important for this function, because for the existing users,
we need to keep generating the same UUIDs.
Originally, this function was a variadic function with NULL sentinel.
That means, when you write
nm_uuid_generate_from_strings(uuid_type, type_arg, v1, v2, v3, NULL);
and v2 happens to be NULL, then v3 is ignored. That is most likely not
what the user intended. Maybe they had a bug and v2 should not be NULL.
But nm_uuid_generate_from_strings() should not require that all
arguments are non-NULL and it should not ignore arguments after the
first NULL.
For example, one user works around this via
uuid = nm_uuid_generate_from_strings_old("ibft",
s_hwaddr,
s_vlanid ? "V" : "v",
s_vlanid ? s_vlanid : "",
s_ipaddr ? "A" : "DHCP",
s_ipaddr ? s_ipaddr : "");
which is cumbersome and ugly.
That will be fixed next, by adding a function that doesn't suffer
from this problem. But "this problem" is part of the API of the
function, we cannot just change it. Instead, rename it and all
users, so they can keep doing the same.
New users of course should no longer use the "old" function.
For new uses of nm_uuid_generate_from_strings() we should generate version5
UUIDs and we should use unique namespace UUID arguments.
The namespace UUID was so far replaced by always passing a special prefix
as first string. It seems nicer to use a namespace instead.
Version3 UUIDs should not be used for new applications.
Hence, nm_uuid_generate_from_strings_v3() is no longer a desirable way to
generate UUIDs, so drop the wrapper.
nm_uuid_generate_from_strings() uses variant3 UUIDs based on MD5.
We shouldn't use that in the future.
We will add a replacement, so rename this function so that the "good"
name is free again. Of course, code that uses this function currently
relies on that the behavior doesn't change. We cannot just drop it
entirely, but will replace it by something that gives the same result.
Rename.
When a NMDevice is involved in a PPPoE activation, it means that the
connection has connection.interface-name=<ethernet-interface>. In such
case, the ppp ifindex should be set as ip-ifindex of the ethernet
device.
Fixes: 58287cbcc0 ('core: rework IP configuration in NetworkManager using layer 3 configuration')
The abbreviations "ms", "us", "ns" don't look good.
Spell out to "msec", "usec", "nsec" as done at other places.
Also, rename NM_SHUTDOWN_TIMEOUT_MS_WATCHDOG to
NM_SHUTDOWN_TIMEOUT_ADDITIONAL_MSEC.
Also, rename NM_SHUTDOWN_TIMEOUT_MS to NM_SHUTDOWN_TIMEOUT_MAX_MSEC.
There are different timeouts, and this is the maximum gracetime we
will give during shutdown to complete async operations.
Naming is hard, but I think these are better names.
We use clang-format for automatic formatting of our source files.
Since clang-format is actively maintained software, the actual
formatting depends on the used version of clang-format. That is
unfortunate and painful, but really unavoidable unless clang-format
would be strictly bug-compatible.
So the version that we must use is from the current Fedora release, which
is also tested by our gitlab-ci. Previously, we were using Fedora 34 with
clang-tools-extra-12.0.1-1.fc34.x86_64.
As Fedora 35 comes along, we need to update our formatting as Fedora 35
comes with version "13.0.0~rc1-1.fc35".
An alternative would be to freeze on version 12, but that has different
problems (like, it's cumbersome to rebuild clang 12 on Fedora 35 and it
would be cumbersome for our developers which are on Fedora 35 to use a
clang that they cannot easily install).
The (differently painful) solution is to reformat from time to time, as we
switch to a new Fedora (and thus clang) version.
Usually we would expect that such a reformatting brings minor changes.
But this time, the changes are huge. That is mentioned in the release
notes [1] as
Makes PointerAligment: Right working with AlignConsecutiveDeclarations. (Fixes https://llvm.org/PR27353)
[1] https://releases.llvm.org/13.0.0/tools/clang/docs/ReleaseNotes.html#clang-format
If the authentication is optional, we are going to re-enter stage2. Set
the "ready" variable so that we can return success immediately and
skip to stage3.
Completely rework IP configuration in the daemon. Use NML3Cfg as layer 3
manager for the IP configuration of an interface. Use NML3ConfigData as
pieces of configuration that the various components collect and
configure. NMDevice is managing most of the IP configuration at a higher
level, that is, it starts DHCP and other IP methods. Rework the state
handling there.
This is a huge rework of how NetworkManager daemon handles IP
configuration. Some fallout is to be expected.
It appears the patch deletes many lines of code. That is not accurate, because
you also have to count the files `src/core/nm-l3*`, which were unused previously.
Co-authored-by: Beniamino Galvani <bgalvani@redhat.com>
The check whether the current setting are already as expected are wrong.
The reason is that nm_platform_ethtool_set_link_settings() also sets
the announced ethernet modes, but nm_platform_ethtool_get_link_settings()
does not give them.
That means, we cannot check whether the current link configuration is
the same, because the getter doesn't give that information.
Consequently, we must not skip the setting on the assumption that
there is nothing to change.
This bug has bad effects. If the device is currently activated with ethtool
option set, then re-activating the profile will result in wrongly
skipping the update.
There is no point in logging the current speed/duplex. OK, with
the "*", we could at least see whether the printed values are
to be set, or are currently configured on the interface.
But mixing these two outputs is confusing and meaningless.
Either log what we are about to do, or what the current configuration
is. Not a mix of both.
Use `_nm_connection_ensure_setting()` to eliminate the
duplicated codes. This function will retrieve the specific setting from
connection, if not found, create new one and attach to the connection.
Signed-off-by: Gris Ge <fge@redhat.com>
D-Bus 1.3.1 (2010) introduced the standard "PropertiesChanged" signal
on "org.freedesktop.DBus.Properties". NetworkManager is old, and predates
this API. From that time, it still had it's own PropertiesChanged signal
that are emitted together with the standard ones. NetworkManager
supports the standard PropertiesChanged signal since it switched to
gdbus library in version 1.2.0 (2016).
These own signals are deprecated for a long time already ([1], 2016), and
are hopefully not used by anybody anymore. libnm-glib was using them and
relied on them, but that library is gone. libnm does not use them and neither
does plasma-nm.
Hopefully no users are left that are affected by this API break.
[1] 6fb917178a
Previously, we used nm_udev_utils_property_as_boolean(), which was
taken from g_udev_device_get_property_as_boolean(). That function
accepts "1" and "true" (with ASCII case insensitive).
When we parse a flag, there is no need to reject "no", "yes" or
"on"/"off" as invalid (and thus return FALSE). We have a boolean
parse method _nm_utils_ascii_str_to_bool(), which parses everything
that nm_udev_utils_property_as_boolean() accepts, and more.
Be liberal in what we accept, so use our general parse function.
802-1x.optional=yes means that NM should tolerate a failure or a
timeout of the 802.1X authentication and should keep the connection
up. Even if the authentication doesn't succeed, NM keeps the
supplicant running so that it can continue trying.
If the supplicant disappears because it crashed or was killed
externally, NM should fail the connection so that it can be retried.
The current code is wrong also because after releasing the supplicant
interface, it calls wired_auth_cond_fail() which tries to connect a
signal to priv->supplicant.iface (which is NULL).
https://bugzilla.redhat.com/show_bug.cgi?id=1934291https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/776
"libnm-core/" is rather complicated. It provides a static library that
is linked into libnm.so and NetworkManager. It also contains public
headers (like "nm-setting.h") which are part of public libnm API.
Then we have helper libraries ("libnm-core/nm-libnm-core-*/") which
only rely on public API of libnm-core, but are themself static
libraries that can be used by anybody who uses libnm-core. And
"libnm-core/nm-libnm-core-intern" is used by libnm-core itself.
Move "libnm-core/" to "src/". But also split it in different
directories so that they have a clearer purpose.
The goal is to have a flat directory hierarchy. The "src/libnm-core*/"
directories correspond to the different modules (static libraries and set
of headers that we have). We have different kinds of such modules because
of how we combine various code together. The directory layout now reflects
this.
Currently "src/" mostly contains the source code of the daemon.
I say mostly, because that is not true, there are also the device,
settings, wwan, ppp plugins, the initrd generator, the pppd and dhcp
helper, and probably more.
Also we have source code under libnm-core/, libnm/, clients/, and
shared/ directories. That is all confusing.
We should have one "src" directory, that contains subdirectories. Those
subdirectories should contain individual parts (libraries or
applications), that possibly have dependencies on other subdirectories.
There should be a flat hierarchy of directories under src/, which
contains individual modules.
As the name "src/" is already taken, that prevents any sensible
restructuring of the code.
As a first step, move "src/" to "src/core/". This gives space to
reorganize the code better by moving individual components into "src/".
For inspiration, look at systemd's "src/" directory.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/743
2021-02-04 09:45:55 +01:00
Renamed from src/devices/nm-device-ethernet.c (Browse further)
