Add per port priority support for bond active port re-selection during
failover. A higher number means a higher priority in selection. The
primary port still has the highest priority. This option is only
compatible with active-backup, balance-tlb and balance-alb modes.
sysfs is deprecated and kernel will not add new bond port options to
sysfs. Netlink is a stable API and therefore is the right method to
communicate with kernel in order to set the link options.
This changes the signature of detach_port() to be asynchronous,
similarly to attach_port(). The implementation can return TRUE/FALSE
on immediate completion.
Current implementations return immediately and so there is no change
in behavior for now.
This is the IPv6 equivalent of arp_ip_target option. It requires
arp_interval set and allow the user to specify up to 16 IPv6 addresses
as targets. By default, the list is empty.
The valid values for this option are 0 (off) and 1 (on). By default the
value is 1 (on). Please notice that this option is only compatible with
802.3AD mode.
The new arp_missed_max option valid range is 0-255 where value 0 means
not set. Please notice that this option is not compatible with 802.3AD,
balance-tlb and balance-alb modes.
G_TYPE_CHECK_INSTANCE_CAST() can trigger a "-Wcast-align":
src/core/devices/nm-device-macvlan.c: In function 'parent_changed_notify':
/usr/include/glib-2.0/gobject/gtype.h:2421:42: error: cast increases required alignment of target type [-Werror=cast-align]
2421 | # define _G_TYPE_CIC(ip, gt, ct) ((ct*) ip)
| ^
/usr/include/glib-2.0/gobject/gtype.h:501:66: note: in expansion of macro '_G_TYPE_CIC'
501 | #define G_TYPE_CHECK_INSTANCE_CAST(instance, g_type, c_type) (_G_TYPE_CIC ((instance), (g_type), c_type))
| ^~~~~~~~~~~
src/core/devices/nm-device-macvlan.h:13:6: note: in expansion of macro 'G_TYPE_CHECK_INSTANCE_CAST'
13 | (G_TYPE_CHECK_INSTANCE_CAST((obj), NM_TYPE_DEVICE_MACVLAN, NMDeviceMacvlan))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Avoid that by using _NM_G_TYPE_CHECK_INSTANCE_CAST().
This can only be done for our internal usages. The public headers
of libnm are not changed.
In the next commit nm_device_bring_up() will be extended with a new
argument. Most callers just want to bring up the device synchronously
and don't care about the "no_firmware" argument. Introduce a
nm_device_bring_up_full() for callers that need special behavior.
If we're generating a connection for an externally configured slave,
refer the master by the UUID instead of the device name.
This doesn't matter most of the time. However, on a checkpoint restore
we need to make sure that a connection that is unambiguously the original
master is up.
Otherwise it could happen that a different connection was activated on the
same master device and the slaves being restored don't agree on which master
connection to bring up.
I can't think of any thing that would rely on this but I've been wrong
about more serious things before.
Fixes-test: @libnm_snapshot_reattach_unmanaged_ports_to_bridge
https://bugzilla.redhat.com/show_bug.cgi?id=2125615
Previously, we used _nm_utils_ascii_str_to_bool(). That can accept any
kind of input (like "true"), so one might think that this is better to
use on user-input. However, NMSettingBond already validates the these
options are integers (either "0" or "1"). So a value like "true"
could never be here.
Use _nm_setting_bond_opt_value_as_intbool() because that asserts that
the option if of the expected type (integer).
Bond option netlink support requires primary property to be a ifindex
instead of the interface name. This is a workaround for supporting
specifying a primary that does not exist yet.
```
nmcli con add type bond ifname mybond0 bond.options "mode=active-backup,primary=veth1"
Connection 'bond-mybond0' (38100ef9-11e2-4003-aff9-cb2d152ce34f) successfully added.
nmcli con add type ethernet ifname veth1 master mybond0
cat /sys/class/net/mybond0/bonding/primary
veth1
```
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1362
Fixes: e064eb9d13 ('bond: use netlink to set bond options')
- name things related to `in_addr_t`, `struct in6_addr`, `NMIPAddr` as
`nm_ip4_addr_*()`, `nm_ip6_addr_*()`, `nm_ip_addr_*()`, respectively.
- we have a wrapper `nm_inet_ntop()` for `inet_ntop()`. This name
of our wrapper is chosen to be familiar with the libc underlying
function. With this, also name functions that are about string
representations of addresses `nm_inet_*()`, `nm_inet4_*()`,
`nm_inet6_*()`. For example, `nm_inet_parse_str()`,
`nm_inet_is_normalized()`.
<<<<
R() {
git grep -l "$1" | xargs sed -i "s/\<$1\>/$2/g"
}
R NM_CMP_DIRECT_IN4ADDR_SAME_PREFIX NM_CMP_DIRECT_IP4_ADDR_SAME_PREFIX
R NM_CMP_DIRECT_IN6ADDR_SAME_PREFIX NM_CMP_DIRECT_IP6_ADDR_SAME_PREFIX
R NM_UTILS_INET_ADDRSTRLEN NM_INET_ADDRSTRLEN
R _nm_utils_inet4_ntop nm_inet4_ntop
R _nm_utils_inet6_ntop nm_inet6_ntop
R _nm_utils_ip4_get_default_prefix nm_ip4_addr_get_default_prefix
R _nm_utils_ip4_get_default_prefix0 nm_ip4_addr_get_default_prefix0
R _nm_utils_ip4_netmask_to_prefix nm_ip4_addr_netmask_to_prefix
R _nm_utils_ip4_prefix_to_netmask nm_ip4_addr_netmask_from_prefix
R nm_utils_inet4_ntop_dup nm_inet4_ntop_dup
R nm_utils_inet6_ntop_dup nm_inet6_ntop_dup
R nm_utils_inet_ntop nm_inet_ntop
R nm_utils_inet_ntop_dup nm_inet_ntop_dup
R nm_utils_ip4_address_clear_host_address nm_ip4_addr_clear_host_address
R nm_utils_ip4_address_is_link_local nm_ip4_addr_is_link_local
R nm_utils_ip4_address_is_loopback nm_ip4_addr_is_loopback
R nm_utils_ip4_address_is_zeronet nm_ip4_addr_is_zeronet
R nm_utils_ip4_address_same_prefix nm_ip4_addr_same_prefix
R nm_utils_ip4_address_same_prefix_cmp nm_ip4_addr_same_prefix_cmp
R nm_utils_ip6_address_clear_host_address nm_ip6_addr_clear_host_address
R nm_utils_ip6_address_same_prefix nm_ip6_addr_same_prefix
R nm_utils_ip6_address_same_prefix_cmp nm_ip6_addr_same_prefix_cmp
R nm_utils_ip6_is_ula nm_ip6_addr_is_ula
R nm_utils_ip_address_same_prefix nm_ip_addr_same_prefix
R nm_utils_ip_address_same_prefix_cmp nm_ip_addr_same_prefix_cmp
R nm_utils_ip_is_site_local nm_ip_addr_is_site_local
R nm_utils_ipaddr_is_normalized nm_inet_is_normalized
R nm_utils_ipaddr_is_valid nm_inet_is_valid
R nm_utils_ipx_address_clear_host_address nm_ip_addr_clear_host_address
R nm_utils_parse_inaddr nm_inet_parse_str
R nm_utils_parse_inaddr_bin nm_inet_parse_bin
R nm_utils_parse_inaddr_bin_full nm_inet_parse_bin_full
R nm_utils_parse_inaddr_prefix nm_inet_parse_with_prefix_str
R nm_utils_parse_inaddr_prefix_bin nm_inet_parse_with_prefix_bin
R test_nm_utils_ip6_address_same_prefix test_nm_ip_addr_same_prefix
./contrib/scripts/nm-code-format.sh -F
sysfs is deprecated and kernel people will not add new bond options to
sysfs. Netlink is a stable API and therefore is the right method to
communicate with kernel in order to set the link options.
Currently nm_setting_bond_get_option_normalized() and
nm_setting_bond_get_option_or_default() are identical functions. As the
first one is exposed as public API and has a better name, let's drop the
second one.
For some device types the attach-port operation doesn't complete
immediately. NMDevice needs to wait that the operation completes
before proceeding (for example, before starting stage3 for the port).
Change attach_port() so that it can return TERNARY_DEFAULT to indicate
that the operation will complete asynchronously. Most of devices are
not affected by this and can continue returning TRUE/FALSE as before
without callback.
We have nm_device_master_add_slave(). This should be mirrored by
nm_device_master_release_slave() (not release-one-slave).
Thereby, also rename nm_device_master_release_slaves() to
nm_device_master_release_slaves_all() to make it clearer.
We use clang-format for automatic formatting of our source files.
Since clang-format is actively maintained software, the actual
formatting depends on the used version of clang-format. That is
unfortunate and painful, but really unavoidable unless clang-format
would be strictly bug-compatible.
So the version that we must use is from the current Fedora release, which
is also tested by our gitlab-ci. Previously, we were using Fedora 34 with
clang-tools-extra-12.0.1-1.fc34.x86_64.
As Fedora 35 comes along, we need to update our formatting as Fedora 35
comes with version "13.0.0~rc1-1.fc35".
An alternative would be to freeze on version 12, but that has different
problems (like, it's cumbersome to rebuild clang 12 on Fedora 35 and it
would be cumbersome for our developers which are on Fedora 35 to use a
clang that they cannot easily install).
The (differently painful) solution is to reformat from time to time, as we
switch to a new Fedora (and thus clang) version.
Usually we would expect that such a reformatting brings minor changes.
But this time, the changes are huge. That is mentioned in the release
notes [1] as
Makes PointerAligment: Right working with AlignConsecutiveDeclarations. (Fixes https://llvm.org/PR27353)
[1] https://releases.llvm.org/13.0.0/tools/clang/docs/ReleaseNotes.html#clang-format
Completely rework IP configuration in the daemon. Use NML3Cfg as layer 3
manager for the IP configuration of an interface. Use NML3ConfigData as
pieces of configuration that the various components collect and
configure. NMDevice is managing most of the IP configuration at a higher
level, that is, it starts DHCP and other IP methods. Rework the state
handling there.
This is a huge rework of how NetworkManager daemon handles IP
configuration. Some fallout is to be expected.
It appears the patch deletes many lines of code. That is not accurate, because
you also have to count the files `src/core/nm-l3*`, which were unused previously.
Co-authored-by: Beniamino Galvani <bgalvani@redhat.com>
These type-specific getters are not very useful. _nm_connection_get_setting() is
better because the setting type is a parameter so they can be used more generically.
Have less code and use generic helpers.
Use sizeof(queue_id_str), so we don't rely on _MAX_QUEUE_ID_STR_LEN
being the correct size for the string.
Also, let's create an excessively large buffer. True, the previous size
should have always be enough, so in practice there is no difference.
But what if it were not? Should we try to handle an error? How? Just asserting
or report a failure? But we don't because the error cannot happen, can't
it?
Don't answer any of these questions, but by making the string buffer
larger, it's even less likely that these questions become relevant.
If for some reason nm_device_get_iface() gives a long string, then we
don't care and let kernel reject the invalid interface name.
While both functions are basically the same, the majority of the time
we use g_snprintf(). There is no strong reason to prefer one or the
other, but let's keep using one variant.
Use `_nm_connection_ensure_setting()` to eliminate the
duplicated codes. This function will retrieve the specific setting from
connection, if not found, create new one and attach to the connection.
Signed-off-by: Gris Ge <fge@redhat.com>
Naming is important, because the name of a thing should give you a good
idea what it does. Also, to find a thing, it needs a good name in the
first place. But naming is also hard.
Historically, some strv helper API was named as nm_utils_strv_*(),
and some API had a leading underscore (as it is internal API).
This was all inconsistent. Do some renaming and try to unify things.
We get rid of the leading underscore if this is just a regular
(internal) helper. But not for example from _nm_strv_find_first(),
because that is the implementation of nm_strv_find_first().
- _nm_utils_strv_cleanup() -> nm_strv_cleanup()
- _nm_utils_strv_cleanup_const() -> nm_strv_cleanup_const()
- _nm_utils_strv_cmp_n() -> _nm_strv_cmp_n()
- _nm_utils_strv_dup() -> _nm_strv_dup()
- _nm_utils_strv_dup_packed() -> _nm_strv_dup_packed()
- _nm_utils_strv_find_first() -> _nm_strv_find_first()
- _nm_utils_strv_sort() -> _nm_strv_sort()
- _nm_utils_strv_to_ptrarray() -> nm_strv_to_ptrarray()
- _nm_utils_strv_to_slist() -> nm_strv_to_gslist()
- nm_utils_strv_cmp_n() -> nm_strv_cmp_n()
- nm_utils_strv_dup() -> nm_strv_dup()
- nm_utils_strv_dup_packed() -> nm_strv_dup_packed()
- nm_utils_strv_dup_shallow_maybe_a() -> nm_strv_dup_shallow_maybe_a()
- nm_utils_strv_equal() -> nm_strv_equal()
- nm_utils_strv_find_binary_search() -> nm_strv_find_binary_search()
- nm_utils_strv_find_first() -> nm_strv_find_first()
- nm_utils_strv_make_deep_copied() -> nm_strv_make_deep_copied()
- nm_utils_strv_make_deep_copied_n() -> nm_strv_make_deep_copied_n()
- nm_utils_strv_make_deep_copied_nonnull() -> nm_strv_make_deep_copied_nonnull()
- nm_utils_strv_sort() -> nm_strv_sort()
Note that no names are swapped and none of the new names existed
previously. That means, all the new names are really new, which
simplifies to find errors due to this larger refactoring. E.g. if
you backport a patch from after this change to an old branch, you'll
get a compiler error and notice that something is missing.
D-Bus 1.3.1 (2010) introduced the standard "PropertiesChanged" signal
on "org.freedesktop.DBus.Properties". NetworkManager is old, and predates
this API. From that time, it still had it's own PropertiesChanged signal
that are emitted together with the standard ones. NetworkManager
supports the standard PropertiesChanged signal since it switched to
gdbus library in version 1.2.0 (2016).
These own signals are deprecated for a long time already ([1], 2016), and
are hopefully not used by anybody anymore. libnm-glib was using them and
relied on them, but that library is gone. libnm does not use them and neither
does plasma-nm.
Hopefully no users are left that are affected by this API break.
[1] 6fb917178a
Currently we unconditionally reset the MAC to the previous value after
releasing ports. This has some disadvantages:
- by default, after the last port is removed the bond will have one
of the previous port's address, which could conflict with the port;
- in some cases, changing the bond MAC is not possible. For example
when the bond is active-backup and has fail_over_mac=1|2. In such
case the netlink call succeeds, but the address doesn't
change; then NM would keep waiting for some time.
Don't try to restore the MAC unless the bond connection has a cloned
MAC set.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/775
The bond option ad_actor_system only matters (and is available) with
mode=802.3ad.
When you create a new bond, the sysctl value will be set to "00:00:00:00:00:00".
So this seems to be a valid value, and in fact the default value for
this option. However, kernel will fail with EINVAL to set the sysctl to
"00:00:00:00:00:00". Kernel fails both if the value is already
"00:00:00:00:00:00" (i.e. setting the same value results in an error) and
it also fails otherwise (i.e. we cannot ever reset the value to
"00:00:00:00:00:00", at least not via sysfs).
Avoid the warning in the common case, where the value is already as
expected.
Otherwise, we still get the warning and won't be able to set the right
value. But this is really a limitation of the kernel API where we cannot
do anything about it (in NetworkManager).
https://bugzilla.redhat.com/show_bug.cgi?id=1923999
"libnm-core/" is rather complicated. It provides a static library that
is linked into libnm.so and NetworkManager. It also contains public
headers (like "nm-setting.h") which are part of public libnm API.
Then we have helper libraries ("libnm-core/nm-libnm-core-*/") which
only rely on public API of libnm-core, but are themself static
libraries that can be used by anybody who uses libnm-core. And
"libnm-core/nm-libnm-core-intern" is used by libnm-core itself.
Move "libnm-core/" to "src/". But also split it in different
directories so that they have a clearer purpose.
The goal is to have a flat directory hierarchy. The "src/libnm-core*/"
directories correspond to the different modules (static libraries and set
of headers that we have). We have different kinds of such modules because
of how we combine various code together. The directory layout now reflects
this.
Currently "src/" mostly contains the source code of the daemon.
I say mostly, because that is not true, there are also the device,
settings, wwan, ppp plugins, the initrd generator, the pppd and dhcp
helper, and probably more.
Also we have source code under libnm-core/, libnm/, clients/, and
shared/ directories. That is all confusing.
We should have one "src" directory, that contains subdirectories. Those
subdirectories should contain individual parts (libraries or
applications), that possibly have dependencies on other subdirectories.
There should be a flat hierarchy of directories under src/, which
contains individual modules.
As the name "src/" is already taken, that prevents any sensible
restructuring of the code.
As a first step, move "src/" to "src/core/". This gives space to
reorganize the code better by moving individual components into "src/".
For inspiration, look at systemd's "src/" directory.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/743
2021-02-04 09:45:55 +01:00
Renamed from src/devices/nm-device-bond.c (Browse further)
