We need more information what failed. Don't only return success/failure,
but an error number.
Note that we still don't actually return an error number. Only
the link_add() function is changed to return an nm-error integer.
Platform had it's own scheme for reporting errors: NMPlatformError.
Before, NMPlatformError indicated success via zero, negative integer
values are numbers from <errno.h>, and positive integer values are
platform specific codes. This changes now according to nm-error:
success is still zero. Negative values indicate a failure, where the
numeric value is either from <errno.h> or one of our error codes.
The meaning of positive values depends on the functions. Most functions
can only report an error reason (negative) and success (zero). For such
functions, positive values should never be returned (but the caller
should anticipate them).
For some functions, positive values could mean additional information
(but still success). That depends.
This is also what systemd does, except that systemd only returns
(negative) integers from <errno.h>, while we merge our own error codes
into the range of <errno.h>.
The advantage is to get rid of one way how to signal errors. The other
advantage is, that these error codes are compatible with all other
nm-errno values. For example, previously negative values indicated error
codes from <errno.h>, but it did not entail error codes from netlink.
Now that we have other helper function on platfrom for setting
IP configuration sysctls, rename the function to set the hop-limit
to match the pattern.
NMP_SYSCTL_PATHID_NETDIR_unsafe() uses alloca() to allocate the string.
Assert that the "path" argument is reasonably short.
In practice, that is of course the case, because there are only 2 callers
which take care not to pass an untrusted, unbounded path argument.
Add helper nm_platform_link_get_ifi_flags() to access the
ifi-flags.
This replaces the internal API _link_get_flags() and makes it public.
However, the return value also allows to distinguish between errors
and valid flags.
Also, consider non-visible links. These are links that are in netlink,
but not visible in udev. The ifi-flags are inherrently netlink specific,
so it seems wrong to pretend that the link doesn't exist.
In the past, the headers "linux/if.h" and "net/if.h" were incompatible.
That means, we can either include one or the other, but not both.
This is fixed in the meantime, however the issue still exists when
building against older kernel/glibc.
That means, including one of these headers from a header file
is problematic. In particular if it's a header like "nm-platform.h",
which itself is dragged in by many other headers.
Avoid that by not including these headers from "platform.h", but instead
from the source files where needed (or possibly from less popular header
files).
Currently there is no problem. However, this allows an unknowing user to
include <net/if.h> at the same time with "nm-platform.h", which is easy
to get wrong.
- previously, parsing wireguard genl data resulted in memory corruption:
- _wireguard_update_from_allowedips_nla() takes pointers to
allowedip = &g_array_index (buf->allowedips, NMWireGuardAllowedIP, buf->allowedips->len - 1);
but resizing the GArray will invalidate this pointer. This happens
when there are multiple allowed-ips to parse.
- there was some confusion who owned the allowedips pointers.
_wireguard_peers_cpy() and _vt_cmd_obj_dispose_lnk_wireguard()
assumed each peer owned their own chunk, but _wireguard_get_link_properties()
would not duplicate the memory properly.
- rework memory handling for allowed_ips. Now, the NMPObjectLnkWireGuard
keeps a pointer _allowed_ips_buf. This buffer contains the instances for
all peers.
The parsing of the netlink message is the complicated part, because
we don't know upfront how many peers/allowed-ips we receive. During
construction, the tracking of peers/allowed-ips is complicated,
via a CList/GArray. At the end of that, we prettify the data
representation and put everything into two buffers. That is more
efficient and simpler for user afterwards. This moves complexity
to the way how the object is created, vs. how it is used later.
- ensure that we nm_explicit_bzero() private-key and preshared-key. However,
that only works to a certain point, because our netlink library does not
ensure that no data is leaked.
- don't use a "struct sockaddr" union for the peer's endpoint. Instead,
use a combintation of endpoint_family, endpoint_port, and
endpoint_addr.
- a lot of refactoring.
Also, add two more features "tx-tcp-segmentation" and
"tx-tcp6-segmentation". There are two reasons for that:
- systemd-networkd supports setting these two features,
so lets support them too (apparently they are important
enough for networkd).
- these two features are already implicitly covered by "tso".
Like for the "ethtool" program, "tso" is an alias for several
actual features. By adding two features that are already
also covered by an alias (which sets multiple kernel names
at once), we showcase how aliases for the same feature can
coexist. In particular, note how setting
"tso on tx-tcp6-segmentation off" will behave as one would
expect: all 4 tso features covered by the alias are enabled,
except that particular one.
Add platform support for IP6GRE and IP6GRETAP tunnels. The former is a
virtual tunnel interface for GRE over IPv6 and the latter is the L2
variant.
The platform code internally reuses and extends the same structure
used by IPv6 tunnels.
Add support for a new wireguard link type to the platform code. For now
this only covers querying existing links via genetlink and parsing them
into platform objects.
Devices of different link types can actually have the same MAC address.
We'll want to use this to find a device of a particular type by its
hardware address.
For completeness, extend the API to support non-persistant
device. That requires that nm_platform_link_tun_add()
returns the file descriptor.
While NetworkManager doesn't create such devices itself,
it recognizes the IFLA_TUN_PERSIST / IFF_PERSIST flag.
Since ip-tuntap (obviously) cannot create such devices,
we cannot add a test for how non-persistent devices look
in the platform cache. Well, we could instead add them
with ioctl directly, but instead, just extend the platform
API to allow for that.
Also, use the function from test-lldp.c to (optionally) use
nm_platform_link_tun_add() to create the tap device.
Instead have one particular nm_ip6_config_get_address_first_nontentative() function,
make it more extendable. Now, we pass a match-type argument, which can control which
element to search.
This patch has no change in behavior, but it already makes clear, that
nm_ip6_config_get_address_first_nontentative() was buggy, because it would
also return addresses that failed DAD.
Kernel recently got support for exposing TUN/TAP information on netlink
[1], [2], [3]. Add support for it to the platform cache.
The advantage of using netlink is that querying sysctl bypasses the
order of events of the netlink socket. It is out of sync and racy. For
example, platform cache might still think that a tun device exists, but
a subsequent lookup at sysfs might fail because the device was deleted
in the meantime. Another point is, that we don't get change
notifications via sysctl and that it requires various extra syscalls
to read the device information. If the tun information is present on
netlink, put it into the cache. This bypasses checking sysctl while
we keep looking at sysctl for backward compatibility until we require
support from kernel.
Notes:
- we had two link types NM_LINK_TYPE_TAP and NM_LINK_TYPE_TUN. This
deviates from the model of how kernel treats TUN/TAP devices, which
makes it more complicated. The link type of a NMPlatformLink instance
should match what kernel thinks about the device. Point in case,
when parsing RTM_NETLINK messages, we very early need to determine
the link type (_linktype_get_type()). However, to determine the
type of a TUN/TAP at that point, we need to look into nested
netlink attributes which in turn depend on the type (IFLA_INFO_KIND
and IFLA_INFO_DATA), or even worse, we would need to look into
sysctl for older kernel vesions. Now, the TUN/TAP type is a property
of the link type NM_LINK_TYPE_TUN, instead of determining two
different link types.
- various parts of the API (both kernel's sysctl vs. netlink) and
NMDeviceTun vs. NMSettingTun disagree whether the PI is positive
(NM_SETTING_TUN_PI, IFLA_TUN_PI, NMPlatformLnkTun.pi) or inverted
(NM_DEVICE_TUN_NO_PI, IFF_NO_PI). There is no consistent way,
but prefer the positive form for internal API at NMPlatformLnkTun.pi.
- previously NMDeviceTun.mode could not change after initializing
the object. Allow for that to happen, because forcing some properties
that are reported by kernel to not change is wrong, in case they
might change. Of course, in practice kernel doesn't allow the device
to ever change its type, but the type property of the NMDeviceTun
should not make that assumption, because, if it actually changes, what
would it mean?
- note that as of now, new netlink API is not yet merged to mainline Linus
tree. Shortcut _parse_lnk_tun() to not accidentally use unstable API
for now.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1277457
[2] https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git/commit/?id=1ec010e705934c8acbe7dbf31afc81e60e3d828b
[3] https://git.kernel.org/pub/scm/network/iproute2/iproute2-next.git/commit/?id=118eda77d6602616bc523a17ee45171e879d1818https://bugzilla.redhat.com/show_bug.cgi?id=1547213https://github.com/NetworkManager/NetworkManager/pull/77
GByteArray is a mutable array of bytes. For every practical purpose, the hwaddr
property of NMDhcpClient is an immutable sequence of bytes. Thus, make it a
GBytes.
We want to add addresses in a particular order so that source address
selection works.
Note that @known_addresses contains the desired addresses in order of
least-important first, while @plat_addresses contains them in opposite
order. Previously, this inverted order was not considered, and we
essentially ended up removing and re-adding all addresses every time.
Fix that. While at it, get rid of the O(n^2) runtime complexity, and
make it O(n) by iterating both lists simultaneously.
Often, we want in API that an input argument is read-only and not modified
by the function call. Not modifying input arguments is a good
convention.
However, in this case there are only two callers, and both clearly do
not care whether the @known_addresses array will be modified.
Clear out addresses that are already expired and enforce that there are
no duplicate addresses. Basically, use @known_addresses for bookkeeping
which addresses are to be ignored.
Add a function that allows to re-request all objects of a certain type.
Usually, the cache is supposed to keep itself in a consistent state and
this function is not useful.
It is however useful during testing and debugging to explicitly reload
an object type.
If you ever think to need this function in non-testing code, then
something else is probably wrong with the cache implementation.
XXX was used to either raise attention (NOTE) or to indicate
that this is ugly code that should be fixed (FIXME). The usage
was inconsistent.
Let's avoid XXX and use either NOTE or FIXME.
It only makes sense to call delete() with NMPObjects that
we obtained from the platform cache. Otherwise, if we didn't
get it from the cache in the first place, we wouldn't know
what to delete.
Hence, the input argument is (almost) always an NMPObject
in the first place. That is different from add(), where
we might create a new specific NMPlatform* instance on the
stack. For add() it makes slightly more sense to have different
functions depending on the type. For delete(), it doesn't.
The "onlink" flag for IPv4 routes is part of the route ID.
Consider it in nm_platform_ip4_route_cmp().
Also, allow configuring the flag when adding a route.
Note that for IPv6, the onlink flag is still ignored.
Pretty much like kernel does.
Setting the MTU failes under regular conditions, for example when
setting the MTU of a master larger then the MTU of the slaves.
Logging a warning it too alarming.
We often want to cascade hashing, meaning, to combine the
outcome of various hash functions in a larger hash.
Instead of having each hash function return a guint hash value,
accept a hash state argument. This saves the overhead of initializing
and completing the intermediate hash states.
It also avoids loosing entropy when we reduce the larger hash state
into the intermediate guint hash value.
