This is needed to ensure that the right CleanupType is chosen when
calling to nm_device_state_changed() a bit later. With this change
CLEANUP_TYPE_REMOVED will be used instead of CLEANUP_TYPE_DECONFIGURE,
which is wrong because the device has already disappeared.
(cherry picked from commit e06aaba1ca)
As we introduced the ipv4.forwarding property in a8a2e6d727 ('ip-config:
Support configuring per-device IPv4 sysctl forwarding option'), we must
not enable or disable the global forwarding setting in the kernel, as it
affects to all the devices, maybe forcing them to behave in a way
different to what the user requested in ipv4.forwarding.
Instead, we need to selectively enable or disable the per-device forwarding
settings. Specifically, only devices activated with ipv4.forwarding=auto
must have their forwarding enabled or disabled depending on shared
connections. Devices with yes/no must not be affected by shared connections.
Also, devices with ipv4.forwarding=auto must get the proper forwarding value
on activation, but also change it when shared connections appear or
disappear dynamically. Use the new sharing-ipv4-change signal from
nm_manager to achieve it.
Fixes: a8a2e6d727 ('ip-config: Support configuring per-device IPv4 sysctl forwarding option')
(cherry picked from commit 32cbf4c629)
This signal notifies about the "sharing state", that's it, when there
is at least one shared connection active or not. Each device informs
to nm_manager when a shared connection is activated or deactivated
and nm_manager emits this signal when the first shared connection is
activated or the last one is deactivated.
For now we're only interested in IPv4 forwarding as it's the only one
that we need to track from nm_device (in following commits).
Fixes: a8a2e6d727 ('ip-config: Support configuring per-device IPv4 sysctl forwarding option')
(cherry picked from commit 8faa33b9d4)
With the ipv4.forwarding property we may modify the forwarding sysctl of
the device on activation. In next commits, we will also modify it if the
connection is shared, instead of modifying the global forwarding.
Restore the forwarding value to the default one when the device is
deconfigured for any reason.
Fixes: a8a2e6d727 ('ip-config: Support configuring per-device IPv4 sysctl forwarding option')
(cherry picked from commit d58d0a793e)
This reverts commit 2ad5fbf025.
It is actually a partial revert. The changes to documentation don't need
to be reverted.
Fixes: 2ad5fbf025 ('policy: refresh IPv4 forwarding after connection activation and disconnection')
(cherry picked from commit f2a2e49d07)
The flag is used for both sleeping and networking disabled conditions.
This is because internally they share logic, but it's not obvious for
users and it has caused confusion in the past when investigating why
devices didn't become managed. Make it explicit that it can be because
of either reason.
It would be better to create two separate flags, actually, and it
doesn't seem complex, but better not to risk introducing bugs for that
little benefit.
Logs before:
device (enp4s0): state change: disconnected -> unmanaged (reason 'unmanaged-sleeping' ...
Logs before:
device (enp4s0): state change: disconnected -> unmanaged (reason 'unmanaged-nm-disabled' ...
(cherry picked from commit 48fc40e1ca)
When we disable networking with `nmcli networking off` the reason that
is logged is "sleeping". Explain instead that networking is disabled.
Before:
device (lo): state change: activated -> deactivating (reason 'sleeping' ...
After:
device (lo): state change: activated -> deactivating (reason 'networking-off' ...
(cherry picked from commit f6d6a7e2eb)
When we do `nmcli networking off` it's shown as state "sleeping". This
is confusing, and the only reason is that we share internally code to
handle both situations in a similar way.
Rename the state to the more generic name "disabled", situation that can
happen either because of sleeping or networking off.
Clients cannot differentiate the exact reason only with the NMState value,
but better that they show "network off" as this is the most common reason
that they will be able to display. If the system is suspending, there will
be only a short period of time that they can show the state, and showing
"network off" is not wrong because that's what NM has done as a response
to suspend.
In the logs, let's make explicit the exact reason why state is changing
to DISABLED: sleeping or networking off.
Logs before:
manager: disable requested (sleeping: no enabled: yes)
manager: NetworkManager state is now ASLEEP
Logs after:
manager: disable requested (sleeping: no enabled: yes)
manager: NetworkManager state is now DISABLED (NEWORKING OFF)
State before:
$ nmcli general
STATE ...
asleep ...
State after:
$ nmcli general
STATE ...
network off ...
(cherry picked from commit 3355ba9380)
Uses the `hsr.protocol-version` property defined in the previous
commit to configure the property in the kernel.
(cherry picked from commit 0b99629278)
Adds support for reapplying the `sriov.vfs` property. Note this
does not include `num_vfs`, as the configuration needs to be reset
and reconfigured from scratch in that case.
Previously, if an existing VF is modified (e.g. if we change the `trust`
flag), we reset all VF configurations, and started from scratch. But in
some cases, this is unnecessarily disruptive.
Resolves: https://issues.redhat.com/browse/RHEL-95844
(cherry picked from commit 4ba3ffee67)
The commit linked below introduced a bug that caused that OVS ports
added externally to NM are always deleted when we delete any OVS
interface. It affects to all externally added ports, including those
that are not related to the deleted interface and even those in
different OVS bridges.
Fix it by only modifying ports and bridges that are ascendants of the
deleted interface, leaving everything else untouched.
Note that bridges and ports still need to have at least one NM-managed
interface, otherwise they will also be purged. For example, an NM-owned
OVS bridge with 2 ports+iface, one NM-owned and one external: if we
delete the NM-owned iface, both ports and the bridge will be deleted.
For now, this is a known limitation that is not being fixed here.
Fixes: 476c89b6f2 ('ovs: only keep bridges and ports with NM interfaces attached')
(cherry picked from commit 93491d76ec)
During disposal we're calling to remove_all_aps that in turns schedules
an auto-activate recheck. As the device is removed, this triggers an
assertion when trying to do the recheck.
Fix that by not scheduling the recheck.
Example of backtrace that this commits fix:
0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:47
1 0xf746e270 in __pthread_kill_implementation (threadid=<optimized out>, signo=6, no_tid=<optimized out>) at pthread_kill.c:43
2 0xf743fbc6 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26
3 0xf7431614 in __GI_abort () at abort.c:79
4 0xf775afea in g_assertion_message (domain=domain@entry=0x209a9f "nm", file=file@entry=0x1f7d59 "../NetworkManager-1.43.7/src/core/nm-policy.c", line=line@entry=1665,
func=func@entry=0x1f94d9 <__func__.6> "nm_policy_device_recheck_auto_activate_schedule",
message=message@entry=0x1d3e950 "assertion failed: (g_signal_handler_find(device, G_SIGNAL_MATCH_DATA, 0, 0, NULL, NULL, NM_POLICY_GET_PRIVATE(self)) != 0)")
at ../glib-2.72.3/glib/gtestutils.c:3253
5 0xf775b05e in g_assertion_message_expr (domain=0x209a9f "nm", file=0x1f7d59 "../NetworkManager-1.43.7/src/core/nm-policy.c", line=1665,
func=0x1f94d9 <__func__.6> "nm_policy_device_recheck_auto_activate_schedule",
expr=0x1f8afc "g_signal_handler_find(device, G_SIGNAL_MATCH_DATA, 0, 0, NULL, NULL, NM_POLICY_GET_PRIVATE(self)) != 0") at ../glib-2.72.3/glib/gtestutils.c:3279
6 0x0005f27a in nm_policy_device_recheck_auto_activate_schedule (self=0x1d3e950, device=0x209a9f) at ../NetworkManager-1.43.7/src/core/nm-policy.c:1679
7 0x000548ae in nm_manager_device_recheck_auto_activate_schedule (self=<optimized out>, device=<optimized out>) at ../NetworkManager-1.43.7/src/core/nm-manager.c:3113
8 0x00070622 in nm_device_recheck_auto_activate_schedule (self=<optimized out>) at ../NetworkManager-1.43.7/src/core/devices/nm-device.c:9249
9 0xf693aa8c in ap_add_remove (self=self@entry=0x1ceb0b0, is_adding=0, ap=<optimized out>, recheck_available_connections=0)
at ../NetworkManager-1.43.7/src/core/devices/wifi/nm-device-wifi.c:846
10 0xf693bcda in remove_all_aps (self=self@entry=0x1ceb0b0) at ../NetworkManager-1.43.7/src/core/devices/wifi/nm-device-wifi.c:863
11 0xf693f83c in dispose (object=0x1ceb0b0) at ../NetworkManager-1.43.7/src/core/devices/wifi/nm-device-wifi.c:3809
12 0xf7806e72 in g_object_unref (_object=<optimized out>) at ../glib-2.72.3/gobject/gobject.c:3636
13 g_object_unref (_object=0x1ceb0b0) at ../glib-2.72.3/gobject/gobject.c:3553
14 0x000f7fa4 in _nm_dbus_object_clear_and_unexport (location=location@entry=0xffa50644) at ../NetworkManager-1.43.7/src/core/nm-dbus-object.c:203
15 0x000576e4 in remove_device (self=self@entry=0x1c9c900, device=<optimized out>, quitting=quitting@entry=1) at ../NetworkManager-1.43.7/src/core/nm-manager.c:2289
16 0x0005a864 in nm_manager_stop (self=self@entry=0x1c9c900) at ../NetworkManager-1.43.7/src/core/nm-manager.c:7784
17 0x00023438 in main (argc=<optimized out>, argv=<optimized out>) at ../NetworkManager-1.43.7/src/core/main.c:530
Fixes: 96f40dcdcd ('wifi/ap: explicitly unexport AP and refactor add/remove AP')
Fixes: https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1791
(cherry picked from commit 3904135150)
When reading NetworkManager.conf and NetworkManager-intern.conf we might
need to know if a group is defined or not, even if it's empty. This is
the case, for example, for [global-dns]. If [global-dns] is defined in
NM.conf overwrites the config from NM-intern, and if it's defined in any
of them they overwrite the configs from connections.
Before this patch, defining it as an empty group was ignored:
```
[global-dns]
```
Instead, it was necessary to add at least one key-value to the group.
Otherwise the group was silently ignored.
```
[global-dns]
searches=
```
Keep empty groups so we can take better decissions about overwritting
configs from other sources.
(cherry picked from commit 4a46f454da)
Clients like nmstate needs to know if the [global-dns] section is
defined or not, so they know if DNS configs from connections are
relevant or not. Expose it in D-Bus by always exposing "searches"
and "options" if it's defined, maybe as empty lists.
(cherry picked from commit 7fb4724efa)
According to the documentation, settings from [global-dns] (searches and
options) are always merged with those from connections. However this was
not happening if no [global-dns-domain-*] exists, in which case
connections were ignored. This happened because in the past both global
sections must de defined or undefined. When this was changed to allow
defining only [global-dns], allowing it in the function that generates
the resolv.conf file was forgotten. Fix that now.
Anyway, merging these configs doesn't make much sense. The searches and
options defined in connections probably make sense only for the nameservers
defined in that same connection.
Because of this, make the following change: if global nameservers are
defined, use searches and options from [global-dns] only, because those
defined in connections may not make sense for the global nameservers. If
[global-dns] is missing, assume an empty [global-dns] section.
Also, if no global nameservers are defined, but [global-dns] is, make
that it overwrites the searches and options defined in connections. This
is not ideal, but none of the alternatives is better and at least this
is easy to remember.
So, the resulting rules from above are:
- If [global-dns] is defined, it always overwrite searches and options
from connections.
- If [global-dns-domain-*] is defined, it always overwrite nameservers
from connections. It overwrites searches and options too.
Fixes: 1f0d1d78d2 ('dns-manager: always apply options from [global-dns]')
Fixes: f57a848da5 ('man: update documentation about global DNS configuration')
(cherry picked from commit 1cba0a3cca)
Since 1.44 we accept a global-dns section without any global-dns-domain
section, so users can define searches and options without defining any
global DNS servers.
When set from the D-Bus API it was still rejected. Fix it.
Fixes: 1f0d1d78d2 ('dns-manager: always apply options from [global-dns]')
(cherry picked from commit 294131a2a4)
NM_SETTING_BOND_OPTION_LACP_ACTIVE is flagged as BOND_OPTFLAG_IFDOWN in
the kernel and hence should not be in OPTIONS_REAPPLY_SUBSET.
Authored-by: Mohith Kumar Thummaluru <mohith.k.kumar.thummaluru@oracle.com>
Signed-off-by: Mohith Kumar Thummaluru <mohith.k.kumar.thummaluru@oracle.com>
Signed-off-by: Pradyumn Rahar <pradyumn.rahar@oracle.com>
(cherry picked from commit 9c48bae3b2)
Unrealized software devices are always available for activation,
hardware devices never.
In nm_manager_get_best_device_for_activation() we call
nm_device_is_available() on candidate devices. Without this fix, any
unrealized software device would be not considered ready for
activation, which is wrong.
A software device can override the default implementation of
is_available(). For example NMDeviceOvsInterface does that and only
checks the OVSDB is ready.
Fixes: ba86c208e0 ('Revert "core: prevent the activation of unavailable OVS interfaces only"')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2253
(cherry picked from commit 8b26cb35ee)
When a software device becomes deactivated, we check whether it can
be unrealized (= deleted in kernel), by calling function
delete_on_deactivate_check_and_schedule().
The function returns without doing anything if there is a new
activation enqueued on the device (priv->queued_act_request), because
in that case the device will be reused for the next activation.
This commit fixes a problem seen in NMCI test
@ovs_delete_connecting_interface: sometimes the device is not
unrealized after deleting the connection. That happens because if the
queued activation fails, we never try again to unrealize the device.
Fix that by calling delete_on_deactivate_check_and_schedule() when
there is a failure starting the queued activation.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2258
(cherry picked from commit 0b03614b68)
Fix the following error seen when running the build_clean.sh script
with LTO disabled:
In file included from ../src/libnm-glib-aux/nm-default-glib.h:66,
from ../src/libnm-glib-aux/nm-default-glib-i18n-prog.h:13,
from ../src/core/nm-default-daemon.h:11,
from ../src/core/platform/tests/test-link.c:6:
In function ‘_nm_auto_freev’,
inlined from ‘test_link_get_bridge_fdb’ at ../src/core/platform/tests/test-link.c:2732:33:
../src/libnm-glib-aux/nm-macros-internal.h:166:8: error: ‘addrs’ may be used uninitialized [-Werror=maybe-uninitialized]
166 | if (*p) {
| ^
../src/core/platform/tests/test-link.c: In function ‘test_link_get_bridge_fdb’:
../src/core/platform/tests/test-link.c:2732:33: note: ‘addrs’ was declared here
2732 | nm_auto_freev NMEtherAddr **addrs;
| ^~~~~
cc1: all warnings being treated as errors
Fixes: 16ef33d380 ('bond-slb: fix memory leak')
(cherry picked from commit b4a22ad2a9)
The "notify::controller" signal must be emitted on the port, not on
the controller.
Fixes: 1f05526ed7 ('core: drop NMDevice master and introduce controller')
(cherry picked from commit 012f1cbfac)
acd_data->probing_timestamp_msec indicates when the probing
started. It is used in different places to calculate the timeout for
certain operations. In particular, it is used to detect that the probe
creation took too long when handling the ACD_STATE_CHANGE_MODE_TIMEOUT
event.
If we reset this timestamp at every timer event, we'll never hit the
probe creation timeout. Therefore, the l3cfg will keep trying forever
to create the probe.
See: https://lists.freedesktop.org/archives/networkmanager/2025-July/000418.html
Fix this by not updating the timestamp during a timeout event.
Fixes: a09f9cc616 ('l3cfg: ensure the probing timeout is initialized on probe start')
(cherry picked from commit 407d753a5a)
The DHCP search list option (119) can use the "message compression"
algorithm specified in RFC 1035 section 4.1.4 to reduce the size of
the message in presence of subdomains that appear multiple times.
When using the compression a label starts with:
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| 1 1| OFFSET |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
where the offset points to a previous domain.
Previously, the parsing code was taking the lower 6 bits of the first
byte, shifting them left 16 bits, and adding the next byte. Instead,
the shift should be of 8 bits.
The effect of this bug was that when the offset was greater than 255,
it was incorrectly parsed as a number larger than the message size,
and the parsing failed.
Note that while a single DHCP option can be at most 255 bytes, a DHCP
message can contain multiple instances of the same option. The
receiver must concatenate all the occurrences according to RFC 3396
and parse the resulting buffer.
Fixes: 6adade6f21 ('dhcp: add nettools dhcp4 client')
(cherry picked from commit a9d7abbc50)
If sendto() fails, the function returns and the remaining entries are
not deallocated. Use nm_auto_freev instead to free the array and the
pointer it contains.
Add a test to check that nm_auto_freev does the right thing on the
value returned by nm_linux_platform_get_bridge_fdb().
Fixes: 3f2f922dd9 ('bonding: send ARP announcement on bonding-slb link/carrier down')
(cherry picked from commit 16ef33d380)
Rename nm_linux_platform_get_link_fdb_table() to
nm_linux_platform_get_bridge_fdb(). The new name better indicates that
the function returns the bridge FDB entries.
(cherry picked from commit 7d23ed9f73)
The validation of embedded NUL character was skipped due to the wrong
order of arguments to memchr(). Fix it.
Fixes: 4043f82790 ('lldp: cleanup converting binary LLDP fields to string')
(cherry picked from commit ce17284c3f)
Linux UIDs/GIDs are 32-bit unsigned integer, with 4294967295 reserved
as undefined.
Before:
# useradd -u 4294967294 -M testuser
useradd warning: testuser's uid -2 outside of the UID_MIN 1000 and UID_MAX 60000 range.
# nmcli connection add type tun ifname tun1 owner 4294967294 ipv4.method disabled ipv6.method disabled
Error: Failed to add 'tun-tun1' connection: tun.owner: '4294967294': invalid user ID
After:
# useradd -u 4294967294 -M testuser
useradd warning: testuser's uid -2 outside of the UID_MIN 1000 and UID_MAX 60000 range.
# nmcli connection add type tun ifname tun1 owner 4294967294 ipv4.method disabled ipv6.method disabled
Connection 'tun-tun1' (5da24d19-1723-45d5-8e04-c976f7a251d0) successfully added.
# ip -d link show tun1
2421: tun1: <NO-CARRIER,POINTOPOINT,MULTICAST,NOARP,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 500
link/none promiscuity 0 allmulti 0 minmtu 68 maxmtu 65535
tun type tun pi off vnet_hdr off persist on user testuser ...
^^^^^^^^^^^^^
Fixes: 1f30147a7a ('libnm-core: add NMSettingTun')
(cherry picked from commit 253800238e)
Currently the bug is hidden because the macro is only called with
NM_SETTING_BOND_OPTION_ARP_IP_TARGET.
Fixes: 45c95e9314 ('device/bond: rework setting of arp_ip_target bond options')
(cherry picked from commit 1229fe5abd)
When resolving the system hostname from DNS lookup, we use
nm_utils_validate_hostname() which checks that the result is a valid
hostname. A valid hostname is at most 64 characters on Linux. Anything
longer is discarded.
However, the reverse DNS lookup doesn't return a hostname, it returns
a DNS name. The DNS name can have multiple labels, each limited to 63
characters. The maximum length of the DNS name is 253 characters.
If the result is longer than 64 characters because it has multiple
labels, we should still accept it, provided that it is a valid DNS
name. Then when setting the hostname in the system, only the first
label will be kept.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2243
Resolves: https://issues.redhat.com/browse/RHEL-104357
(cherry picked from commit b019883a9a)
Commit c5d1e35f99 ('device: support reapplying bridge-port VLANs')
didn't update can_reapply_change() to accept the "bridge-port.vlans"
property during a reapply. So, it was only possible to change the
bridge port VLANs by updating the "bridge.vlan-default-pvid" property
and doing a reapply. Fix that.
Fixes: c5d1e35f99 ('device: support reapplying bridge-port VLANs')
(cherry picked from commit 261fa8db33)
If the bridge default-pvid is zero, it means that the default PVID is
disabled. That is, the bridge PVID is not propagated to ports.
Currently NM tries to merge the existing bridge VLANs on the port with
the default PVID from the bridge, even when the PVID is zero. This
causes an error when setting the new VLAN list in the kernel, because
it rejects VLAN zero.
Skip the merge of the default PVID when zero.
Fixes: c5d1e35f99 ('device: support reapplying bridge-port VLANs')
(cherry picked from commit bf79fbd678)
Currently, when a call to Reapply() results in stage3 being re-run, IPv6
ends up messed up. Like this:
$ nmcli device modify eth0 ipv4.address ''
$ nmcli device modify eth0 ipv4.address 172.31.13.37/24
$
NetworkManager[666]: <debug> [1751286095.2070] device[c95ca04a69467d81] (eth0): ip4: reapply...
...
NetworkManager[666]: <debug> [1751286095.2104] device[c95ca04a69467d81] (eth0): ip6: addrgenmode6: set none (already set)
NetworkManager[666]: <debug> [1751286095.2105] device[c95ca04a69467d81] (eth0): ip6: addrgenmode6: toggle disable_ipv6 sysctl after disabling addr-gen-mode
NetworkManager[666]: <debug> [1751286095.2105] platform-linux: sysctl: setting '/proc/sys/net/ipv6/conf/eth0/disable_ipv6' to '1' (current value is '0')
NetworkManager[666]: <debug> [1751286095.2106] platform-linux: sysctl: setting '/proc/sys/net/ipv6/conf/eth0/disable_ipv6' to '0' (current value is '1')
NetworkManager[666]: <debug> [1751286095.2106] platform-linux: sysctl: setting '/proc/sys/net/ipv6/conf/eth0/accept_ra' to '0' (current value is identical)
NetworkManager[666]: <debug> [1751286095.2106] platform-linux: sysctl: setting '/proc/sys/net/ipv6/conf/eth0/disable_ipv6' to '0' (current value is identical)
Not only is this unnecessary because addr-gen-mode already has the
desired value (as is logged), but also wipes off all IPv6 configuration.
This is fine on initial configuration, but not on Reapply().
Let's look at the device state first: if we've progressed past ip-config
state, then we can't possibly ever touch the offending sysctls. It's
okay -- we don't need to: addr-gen-mode is going to be set right if we
went through ip-config before.
Resolves: https://issues.redhat.com/browse/NMT-1681https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2232
(cherry picked from commit 9bbb113987)
Add a new capability to indicate that NetworkManager supports the
"sriov.preserve-on-down" connection property. With this, clients can
set the property only when supported, without the risk of creating an
invalid connection.
(cherry picked from commit 8e40f7e289)
This commit adds NM_VERSION_INFO_CAPABILITY_IPV4_FORWARDING to the
VersionInfo D-Bus property, allowing clients such as nmstate to check
the NetworkManager's support of configuring per-device IPv4 sysctl
forwarding setting directly via the capabilities bitmask instead of
relying on the NetworkManager version comparisons.
(cherry picked from commit 6a13e8d369)
It is useful when there is an already active device and we want to
bring it down preserving the SR-IOV VFs. For example:
$ nmcli connection add type ethernet ifname eni1np1 sriov.total-vfs 2 ipv4.method disabled ipv6.method disabled
$ nmcli connection up ethernet-eni1np1
$ ip link show eni1np1
342: eni1np1: <BROADCAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/ether 6e:cf:f0:08:74:f4 brd ff:ff:ff:ff:ff:ff
vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, ...
vf 1 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, ...
$ nmcli device modify eni1np1 sriov.preserve-on-down yes
$ nmcli connection down ethernet-eni1np1
$ ip link show eni1np1
342: eni1np1: <BROADCAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/ether 6e:cf:f0:08:74:f4 brd ff:ff:ff:ff:ff:ff
vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, ...
vf 1 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, ...
(cherry picked from commit 6f219aa649)
When using the netdev datapath, we wait that the tun link appears, we
call nm_device_set_ip_ifindex() (which also brings the link up) and
then we check that the link is ready, i.e. that udev has announced the
link and the MAC address is correct. After that, we schedule stage3
(ip-config).
In this, there is a race condition that occurs sometimes in NMCI test
ovs_datapath_type_netdev_with_cloned_mac. In rare conditions,
nm_device_set_ip_ifindex() bring the interface up but then ovs-vswitch
changes again the flags of the interface without IFF_UP. The result is
that the interface stays down, breaking communications.
To fix this, we need to always call nm_device_bring_up() after the tun
device is ready. The problem is that we can't do it in
_netdev_tun_link_cb() because that function is already invoked
synchronously from platform code.
Instead, simplify the handling of the netdev datapath. Every
"link-changed" event from platform is handled by
_netdev_tun_link_cb(), which always schedule a delayed function
_netdev_tun_link_cb_in_idle(). This function just assigns the
ip-ifindex to the device if missing, and starts stage3 if the link is
ready. While doing so, it also bring the interface up.
Fixes: 99a6c6eda6 ('ovs, dpdk: fix creating ovs-interface when the ovs-bridge is netdev')
https://issues.redhat.com/browse/RHEL-17358https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2218
(cherry picked from commit 46e0d2b4e4)
Fix the following:
../src/core/nm-connectivity.c:958:1: warning: ‘check_platform_config’ defined but not used [-Wunused-function]
958 | check_platform_config(NMConnectivity *self,
| ^~~~~~~~~~~~~~~~~~~~~
Fixes: 91d447df19 ('device: don't start connectivity check on unconfigured devices')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2224
(cherry picked from commit 1253cbad5a)
