Some functions from nm-session-monitor.c have an implicit access to
nm_session_monitor_get(). This is non-obvious behavior.
Instead require the explicit session-monitor instance to be
provided -- where needed.
Move the check for a platform link before devtimeout_from_file(). The
check in the platform cache should be more performant and yield success
in most cases.
This can save reading and parsing the ifcfg-rh file.
If NIC related initialization takes a long time in udev processing, but we have
an ifindex from kernel, we still want to wait until udev is finished and the
device is really usable.
Check that by calling nm_platform_link_get_by_ifname() and checking @initialized,
which means udev is finished.
Based on a patch by t-nishimura@hf.jp.nec.com
Improved by thaller@redhat.comhttps://bugzilla.redhat.com/show_bug.cgi?id=1192633
Port remaining bits to gdbus and remove stray dbus-glib references
Drop the dbus-glib version check from configure, since nothing depends
on new dbus-glib any more.
Move nm-dbus-glib-types.h and nm-gvaluearray-compat.h from include/ to
libnm-util/ since they are now only used by libnm-util and libnm-glib.
NM was calling nm_bus_manager_start_service() to claim its bus name
before it exported any of its objects, but this didn't matter under
dbus-glib, because no client connections would be accepted until the
main loop was started later on, by which point we would have exported
everything.
But with gdbus, method calls are initially received in the gdbus
worker thread, which means that clients would be able to connect right
away and then be told that the expected interfaces don't exist.
So move the nm_bus_manager_start_service() call to occur after
creating NMSettings and NMManager (and, indirectly, NMAgentManager).
This requires splitting out the slow parts of nm_settings_new() into a
new nm_settings_start(), so that we can create and export it first,
and then read the connections, etc afterward. (Likewise, there were
still a few potentially-slow bits in nm_manager_new() which are now
moved into nm_manager_start().)
The localization headers are now included via "nm-default.h".
Also fixes several places, where we wrongly included <glib/gi18n-lib.h>
instead of <glib/gi18n.h>. For example under "clients/" directory.
This internal header file should be included by our internal source
code files and header files. It includes in one place other headers
that constitute to a minimal set of required headers. Most notably
this is <glib.h> and our "nm-glib.h" header.
Note that public header files and example source code cannot include
this file as "nm-default.h" is internal only.
Let NMSecretAgent emit the 'disconnected' event when dbus_owner is
still valid so that receivers of the signal can query it. This fixes
the following failed assertion:
remove_agent: assertion 'owner != NULL' failed
Fixes: 2a2fd1216b
Our gdbus generated types use the same names as their corresponding
"real" types, but with "NM" changed to "NMDBus".
Unfortunately, that means that introspection/nmdbus-manager.c (the
generated type for src/nm-manager.c) uses the same type name as the
entirely unrelated src/nm-dbus-manager.c.
Fix this by removing the "d" from src/nm-dbus-manager.c. (We could
rename the generated type instead, but then it becomes inconsistent
with all the other generated types, and we're already using it as
"NMDBusManager" in libnm/nm-manager.c.)
NMSettingConnection's for_each_secret() function works in a
slightly-too-GHashTable-specific way. Reorganize the code now to make
the change to GVariants easier later.
Also, fix a few bugs:
- In the (unlikely) case of a non-secret being stored in
vpn.secrets, we were treating it as though it was a secret
with flags NONE.
- The code was comparing against NONE when it meant !AGENT_OWNED
in a few places. (With the current set of NMSettingSecretFlags
values, this worked, but in the future it might not.)
- In some cases we never called for_each_secret() with the
@remove_non_secrets flag, meaning we might have ended up
passing non-secrets to other code.
Have NMSecretAgent emit "disconnected" when it detects that it has
been disconnected, rather than having both the agent and the agent
manager monitor it separately.
Move D-Bus export/unexport handling into NMExportedObject and remove
type-specific export/get_path methods (export paths are now specified
at the class level, and NMExportedObject handles the counters for all
exported types automatically).
Since all exportable objects now use the same get_path() method, we
can also add some helper methods to simplify get_property()
implementations for object-path and object-path-array properties.
Add NMExportedObject, make it the base class of all D-Bus-exported
types, and move the nm-properties-changed-signal logic into it. (Also,
make NMSettings use the same properties-changed code as everything
else, which it was not previously doing, presumably for historical
reasons).
(This is mostly just shuffling code around at this point, but
NMExportedObject will be more important in the gdbus port, since
gdbus-codegen doesn't do a very good job of supporting objects that
export multiple interfaces [as each NMDevice subclass does, for
example], so we will need more glue/helper code in NMExportedObject
then.)
Rather than randomly including one or more of <glib.h>,
<glib-object.h>, and <gio/gio.h> everywhere (and forgetting to include
"nm-glib-compat.h" most of the time), rename nm-glib-compat.h to
nm-glib.h, include <gio/gio.h> from there, and then change all .c
files in NM to include "nm-glib.h" rather than including the glib
headers directly.
(Public headers files still have to include the real glib headers,
since nm-glib.h isn't installed...)
Also, remove glib includes from header files that are already
including a base object header file (which must itself already include
the glib headers).
Add a file containing the defines like DBUS_INTERFACE_DBUS from
dbus-shared.h, and use it from the gdbus-using files.
Also, convert a bunch of other places that were previously hardcoding
the string values to use the defines instead, and fix the ifcfg-rh
plugin to properly namespace its own D-Bus-related defines.
Originally, if you change the ID of a connection,
the existing keyfile will not be renamed. That means
after renaming a connection, it's keyfile name will
mismatch.
Now, when th user modifies a connection via D-Bus and changes
the connection it, rename the file.
https://bugzilla.gnome.org/show_bug.cgi?id=740738
A GError should contain a nice, human readable error message. The
file:line prefix looks ugly. Also, the error messages are already
systemwide unique. So a user can easily grep for them and locate
the origin.
Now that we set hostname with systemd, call dispatcher in nm-settings.c.
gethostname() in nm-policy.c already sees the new hostname.
Fixes: 6dc35e66d4
Fixes: 6c3d71c431
Fixes:Beaker:NetworkManager_Test44_dispatcher_hostname
Originally, ibft settings were handled by "ifcfg-rh" plugin. Later, we added
a separate "ibft" plugin and moved the functionality there.
The problem was that users quite possibly had a configuration like
[main]
plugins=ifcfg-rh
in their "NetworkManager.conf". That meant, after upgrade users would
no longer have ibft support.
We fixed that by installing "/etc/NetworkManager/conf.d/10-ibft-plugin.conf"
which was read after the main file and contained:
[main]
plugins+=ibft
We no longer want to install configuration snippets with our core packages to
/etc. Avoid the regression by changing the meaning of "ifcfg-rh". By enabling
"ifcfg-rh" you now implicitly enable "ibft" plugin as well. This can be
turned off via "no-ibft". And you can continue to enable "ibft" plugin
alone.
In some cases we want the returned value to be stripped. In some cases,
we want to read the raw value instead of the string parsed by GKeyFile.
Add an flags argument to nm_config_data_get_value(). It is up to the caller
to determine the exact meaning (and whether to strip).
By adding the flags argument, the caller can get the desired behavior easier
without having to workaround it afterwards. But more importantly, it becomes
apparent that there are different ways to retrieve the value and the caller
should decide on the details.
Some plugins had their local defines for the name of the sections and
keys in NMConfig. Move those defines to "nm-config.h".
Usually plugins make use of code in core, but not the other
way round. Defining the names inside "nm-config.h" is no violation of
that because the config section names are anyway not local to the
plugin, but global in the shared name-space with other settings.
For example, another plugins shouldn't reuse the section "ifnet".
For that reason, it is correct and consistent to move these defines
to "nm-config.h".
We don't use those names in core, we merely signal their existance.
We ought to set an error if we're returning NULL from
connection_from_file_full(). Also, printing out a warning ourselves makes no
sense -- the caller communicates this if we signal an error by returning NULL.
