Add a new l3cfg DatFlag to specify that a given l3cd has a
non-link-local IPv4 set.
This will be used to enable or disable IPv4LL automatically in fallback
mode.
The name "dhcp_enabled" is misleading because the flag is set for
method=auto, which doesn't necessarily imply DHCP. Also, it doesn't
convey what the flag is used for. Rename it to
"allow_routes_without_address".
(cherry picked from commit b31febea22)
The dns-type must be included in the hash because it contributes to
the generated composite configuration. Without this, when the type of
a configuration changes (e.g. from DEFAULT to BEST), the DNS manager
would determine that there was no change and it wouldn't call
update_dns().
https://bugzilla.redhat.com/show_bug.cgi?id=2161957
Fixes: 8995d44a0b ('core: compare the DNS configurations before updating DNS')
(cherry picked from commit 46ccc82a81)
The DNS name can now also contain the DoT server name. It's not longer a
binary IP address only.
Extend NML3ConfigData to account for that. To track the additional
data, use the string representation. The alternative to have a separate
type that contains the parsed information would be cumbersome too.
ASSUME is causing more troubles than benefits it provides. This patch is
dropping NM_L3_CFG_COMMIT_TYPE_ASSUME and assume_config_once. NM3LCfg
will commit as if the sys-iface-state is MANAGED.
This patch is part of the effort to remove ASSUME from NetworkManager.
After ASSUME is dropped when starting NetworkManager it will take full
control of the interface, re-configuring it. The interface will be
managed from the start instead of assumed and then managed.
This will solve the situations where an interface is half-up and then a
restart happens. When NetworkManager is back it won't add the missing
addresses (which is what assume does) so the interface will fail during
the activation and will require a full activation.
https://bugzilla.redhat.com/show_bug.cgi?id=2050216https://bugzilla.redhat.com/show_bug.cgi?id=2077605https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1196
(cherry picked from commit bf5927b978)
The force-commit flag is used to force the commit of an address or a
route from DHCP/RA even when it was removed from platform externally
(for example because it expired). Routes generated from the l3cd
should also have the flag set.
Without this, NM properly re-adds the DHCP address after the lease is
lost and obtained again, but fails to add the prefix-route.
Fixes: 2838b1c5e8 ('core: track force-commit flag for l3cd and platform objects')
https://bugzilla.redhat.com/show_bug.cgi?id=2033991https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1049
We use clang-format for automatic formatting of our source files.
Since clang-format is actively maintained software, the actual
formatting depends on the used version of clang-format. That is
unfortunate and painful, but really unavoidable unless clang-format
would be strictly bug-compatible.
So the version that we must use is from the current Fedora release, which
is also tested by our gitlab-ci. Previously, we were using Fedora 34 with
clang-tools-extra-12.0.1-1.fc34.x86_64.
As Fedora 35 comes along, we need to update our formatting as Fedora 35
comes with version "13.0.0~rc1-1.fc35".
An alternative would be to freeze on version 12, but that has different
problems (like, it's cumbersome to rebuild clang 12 on Fedora 35 and it
would be cumbersome for our developers which are on Fedora 35 to use a
clang that they cannot easily install).
The (differently painful) solution is to reformat from time to time, as we
switch to a new Fedora (and thus clang) version.
Usually we would expect that such a reformatting brings minor changes.
But this time, the changes are huge. That is mentioned in the release
notes [1] as
Makes PointerAligment: Right working with AlignConsecutiveDeclarations. (Fixes https://llvm.org/PR27353)
[1] https://releases.llvm.org/13.0.0/tools/clang/docs/ReleaseNotes.html#clang-format
Problem: if l3cfg commits an address and routes from DHCP, when the
address expires those objects are removed automatically. NM tracks the
objects as missing as if the user removed them. This is to prevent
l3cfg to committing them again. If the lease if renewed, l3cfg should
be allowed to commit those objects again.
Introduce a l3cd flag to indicate that it should be force-committed
once, and propagate this flag to platform objects. In this way, l3cfg
can avoid committing again objects that are removed externally, but it
can commit them when the l3cd changes.
Fixes-test: @bridge_down_to_l2_only
Completely rework IP configuration in the daemon. Use NML3Cfg as layer 3
manager for the IP configuration of an interface. Use NML3ConfigData as
pieces of configuration that the various components collect and
configure. NMDevice is managing most of the IP configuration at a higher
level, that is, it starts DHCP and other IP methods. Rework the state
handling there.
This is a huge rework of how NetworkManager daemon handles IP
configuration. Some fallout is to be expected.
It appears the patch deletes many lines of code. That is not accurate, because
you also have to count the files `src/core/nm-l3*`, which were unused previously.
Co-authored-by: Beniamino Galvani <bgalvani@redhat.com>
We often want to be pedantic about not accepting %NULL for getters (or ref,
unref, etc). Often that is also inconvenient, so we would need to write:
if (l3cd)
strv = nm_l3_config_data_get_nameservers(l3cd, addr_family, &len);
else
len = 0;
(and, make sure that strv does not trigger a maybe-uninitialized warning).
Being pedanic here is more cumbersome than helpful. Accept NULL to return
the sensible default.
Also add nm_l3_config_data_get_dns_priority_or_default() helper which maps
NULL or a missing value to zero. This is also only for convenience for certain
callers.
NML3ConfigData is supposed to be immutable. It can be initialized from a
NMConnection, and its DNS priority property might be zero.
For the DNS priority, the value can be overwritten by global defaults.
We thus need to inject the default value at the right place.
It's a bit tricky how this flag works. It's needed for IPv6
link local addresses, which commits changes in %NM_L3_CFG_COMMIT_TYPE_ASSUME
mode. See the code comments how it works.
This commit only adds the flags and let's the NMPlatformIP{Address,Route}
properly track it. What is still needed is to actually implement any
meaning to that during the sync.
Each NML3ConfigData should have a source set, and in fact most callers
would call nm_l3_config_data_set_source() right after creating the
instance.
Move the source parameter to the new() constructor function. Also remove
the setter, making the source of an instance immutable.
As every l3cfg instance generally has a clear purpose, the source should
always be known from the start and doesn't need to change.
We use the merge function to initialize the cloned instance.
Previously, merge did not always copy all properties, so the
cloned instance might not have been identical. Fix that.
Currently "src/" mostly contains the source code of the daemon.
I say mostly, because that is not true, there are also the device,
settings, wwan, ppp plugins, the initrd generator, the pppd and dhcp
helper, and probably more.
Also we have source code under libnm-core/, libnm/, clients/, and
shared/ directories. That is all confusing.
We should have one "src" directory, that contains subdirectories. Those
subdirectories should contain individual parts (libraries or
applications), that possibly have dependencies on other subdirectories.
There should be a flat hierarchy of directories under src/, which
contains individual modules.
As the name "src/" is already taken, that prevents any sensible
restructuring of the code.
As a first step, move "src/" to "src/core/". This gives space to
reorganize the code better by moving individual components into "src/".
For inspiration, look at systemd's "src/" directory.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/743
