These are (most likely) only warnings and not severe bugs.
Some of these changes are mostly made to get a clean run of
Coverity without any warnings.
Error found by running Coverity scan
https://bugzilla.redhat.com/show_bug.cgi?id=1025894
Co-Authored-By: Jiří Klimeš <jklimes@redhat.com>
Signed-off-by: Thomas Haller <thaller@redhat.com>
If the connection has never been saved to disk, it won't have a path yet,
but that doesn't mean we should crash. Next, when reloading connections,
only try to do connection matching on connections that have paths, otherwise
all in-memory-only connections would be removed at the end of
read_connections().
Doing so may cause NetworkManager to run into an very intensive loop in
svUnescape() in shvar.c.
This is 'top' output for very long (invalid team config) - 9309865 bytes long:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
26855 root 20 0 305m 35m 6092 R 99.8 0.9 8:08.11 NetworkManager
and still not finished.
If the connection has never been saved to disk, it won't have a path yet,
but that doesn't mean we should crash. Next, when reloading connections,
only try to do connection matching on connections that have paths, otherwise
all in-memory-only connections would be removed at the end of
read_connections().
In Fedora, OVS ports are now identified in ifcfg files as
"TYPE=OVSPort", which NM doesn't recognize, and so it would ignore
those ifcfg files. Unfortunately, this meant that if auto-default
wasn't disabled, and there was no other configuration defined for the
device, then NM would create an NMDefaultWiredConnection for it and
screw things up.
So, add an "unrecognized-specs" settings plugin property, which allows
a plugin to indicate to NetworkManager that it knows of some
non-NetworkManager-supported connection defined for a device. This
will suppress default-wired connection creation for that device,
similar to the "no-auto-default" config file option, but determined by
the plugin instead of by manual configuration. Devices listed in
unrecognized-specs may still be managed by NetworkManager, unless they
are also listed in unmanaged-specs.
https://bugzilla.redhat.com/show_bug.cgi?id=1022256
Rather than having each connection-parsing function do its own
unmanaged-spec handling, just do it all directly from
connection_from_file(), and don't bother trying to fully parse the
file if it is unmanaged, since it won't ever be seen outside of the
plugin in that case anyway.
This also makes it possible to have an ifcfg file of an unrecognized
type be unmanaged.
We were accidentally removing the connection from priv->connections
(and thus from unmanaged-specs) when NM_CONTROLLED changed to no when
rereading a changed connection file.
If an ifcfg file changed from one non-NULL unmanaged-spec to another
(eg, if it previously had an interface-name: unmanaged-spec, and then
you add a HWADDR line, switching it to a mac: unmanaged-spec), we were
not updating the connection's unmanaged property, or emitting
unmanaged-specs-changed.
Also, remove the notify::unmanaged handler, since only plugin.c ever
changes an existing NMIfcfgConnection's unmanaged property, and it
always emits the signal itself afterward (and it needs to manually
emit the signal in other cases anyway, like when a connection is
removed).
Testcase:
* add 'NM_CONTROLLED=no' to /etc/sysconfig/network-scripts/ifcfg-ABC
* sudo nmcli con reload
* ... NM asserts ...
We need to ref() 'existing' connection before nm_settings_connection_signal_remove(),
because the function unref()s ithe connection via connection_removed_cb().
Backtrace:
...
#4 0x00007fbcf0ea0cba in g_assertion_message_expr (domain=domain@entry=0x0,
file=file@entry=0x7fbcf4e5805d "nm-dbus-manager.c", line=line@entry=848,
func=func@entry=0x7fbcf4e585e0 <__FUNCTION__.15088> "nm_dbus_manager_unregister_object", expr=expr@entry=0x7fbcf4e5820b "G_IS_OBJECT (object)")
at gtestutils.c:2293
#5 0x00007fbcf4de69d9 in nm_dbus_manager_unregister_object (
self=0x7fbcf6fdc9c0, object=0x7fbcf70235c0) at nm-dbus-manager.c:848
#6 0x00007fbcf4dd6a23 in nm_settings_connection_signal_remove (
self=<optimized out>) at settings/nm-settings-connection.c:1541
#7 0x00007fbce6fee884 in connection_new_or_changed (
self=self@entry=0x7fbcf7006f80,
path=path@entry=0x7fbcf70c3f80 "/etc/sysconfig/network-scripts/ifcfg-ABC",
existing=existing@entry=0x7fbcf70235c0,
out_old_path=out_old_path@entry=0x7fff2b7b8988) at plugin.c:327
#8 0x00007fbce6feeca2 in read_connections (plugin=0x7fbcf7006f80)
at plugin.c:453
#9 0x00007fbcf4dd8e98 in impl_settings_reload_connections (
self=0x7fbcf6fd98c0, context=0x7fbcf70bcb30) at settings/nm-settings.c:1262
...
Support new bonding options and set them carefully. The options cannot
be set arbitrarily because they interfere with each other.
This commit is forward-ported from rhel-6.5, see patch
rh901662-bond-more-options.patch, originally written by Dan Williams.
https://bugzilla.redhat.com/show_bug.cgi?id=901662https://bugzilla.redhat.com/show_bug.cgi?id=905532
Co-Authored-By: Dan Williams <dcbw@redhat.com>
Signed-off-by: Thomas Haller <thaller@redhat.com>
Static IP addresses were only read from ifcfg-* file when IP method was
'manual' (BOOTPROTO=none|static). This was to match the legacy initscripts
behaviour. However, NetworkManager supports using additional static IPs in
addition to automatically obtained (DHCP, etc.) addresses. So we now read
static IPs even for automatic methods to be able to use this feature.
https://bugzilla.redhat.com/show_bug.cgi?id=998135
When freeing one of the collections such as GArray, GPtrArray, GSList,
etc. it is common that the items inside the connections must be
freed/unrefed too.
The previous code often iterated over the collection first with
e.g. g_ptr_array_foreach and passing e.g. g_free as GFunc argument.
For one, this has the problem, that g_free has a different signature
GDestroyNotify then the expected GFunc. Moreover, this can be
simplified either by setting a clear function
(g_ptr_array_set_clear_func) or by passing the destroy function to the
free function (g_slist_free_full).
Signed-off-by: Thomas Haller <thaller@redhat.com>
ifcfg-rh had the rule that if an ifcfg file had no BOOTPROTO and no
IPv4 addresses, then it should be treated as method=auto for
compatibility. But in fact, current ifup treats it as method=disabled,
so we should too.
https://bugzilla.gnome.org/show_bug.cgi?id=708875
Make sure that all connections returned from NMSettings or created via
AddAndActivateConnection have an NMSettingIP4Config and an
NMSettingIP6Config, with non-NULL methods, and get rid of
now-unnecessary checks for those.
Also move the slaves-can't-have-IP-config checks into the
platform-independent code as well. This also gets rid of spurious
"ignoring IP4/IP6 configuration" warnings in ifcfg-rh when reading a
slave ifcfg file.
Partly based on a patch from Pavel.
https://bugzilla.gnome.org/show_bug.cgi?id=708875
connection_from_file() requires the 'error' parameter. Not passing a
valid 'error' parameter causes the function to fail and return NULL,
which mean that commit_changes() would always re-write the connection
instead of ignoring commits where nothing has actually changed.
connection_from_file() no longer requires the unmanaged, keyfile,
or routefile parameters, so remove them.
The problem is that there is only a single variable in ifcfg file holding dns
domains - DOMAIN. Thus NetworkManager writes both IPv4 and IPv6 dns-search into
it. While reading there is no way to distinguish between IPv4 and IPv6 values,
so the DOMAIN value is read and only put into IPv4 dns-search.
But, when IPv4 is disabled or invalid, the domains got lost. So in such case
we put DOMAIN variable into IPv6 instead.
https://bugzilla.redhat.com/show_bug.cgi?id=1004866
Routes without gateway are legal and should be treated as a device route
(direct route).
https://bugzilla.gnome.org/show_bug.cgi?id=697525
The original patch was written by Scott Shambarger <scott-gnome@shambarger.net>.
This is a modified version of the patch.
Signed-off-by: Thomas Haller <thaller@redhat.com>
Reported-by: Scott Shambarger <scott-gnome@shambarger.net>
Since Debian 7 (Wheezy) / Ubuntu 11.04 (Natty Narwhal) ifupdown supports
the source stanza to source in other configuration files from
/etc/network/interfaces.
Add support to the ifupdown plugin to include configuration files via
source.
Patch did not apply cleanly and was slightly modified by Thomas Haller.
https://bugzilla.gnome.org/show_bug.cgi?id=707276
Signed-off-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Sebastian Harl <tokkee@debian.org>
This also slighly changes the behaviour for writing IPV6_DEFAULTGW.
- IPV6_DEFAULTGW will be written after IPV6ADDR and
IPV6ADDR_SECONDARY.
- Before, if there were no IPv6 addresse present, the IPV6_DEFAULTGW
might not have been cleared. Now IPV6_DEFAULTGW is always written
(or unset as in the case of gateway ::).
https://bugzilla.redhat.com/show_bug.cgi?id=997759
Signed-off-by: Thomas Haller <thaller@redhat.com>
Unfortunately, $(AM_CPPFLAGS) gets overridden by per-target _CPPFLAGS
variables, which $(INCLUDES) did not, so this requires some additional
changes.
In most places, I have just gotten rid of the per-target _CPPFLAGS
variables; in directories with a single target, the per-target
variable is unnecessary, and in directories with multiple targets, the
per-target variable is often undesirable, since it forces some files
to be compiled twice, even though there ends up being no difference
between the two files.
If BOOTPROTO is set to "none", user states that no ipv4 setting should
be set. So respect that.
Introduce helper is_any_ip4_address_defined() along the way to make the
code more readable.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
In nm_keyfile_plugin_connection_from_file(), disable the "bad owner"
check.
As root you can read all files anyway, or if necessary even chown them,
and for
other users the standard file permissions will do a fine job.
This fixes running "make check" as root.
https://bugzilla.gnome.org/show_bug.cgi?id=701112
Plugins that could save connections to disk previously depended on inotify
events from the kernel to know when to signal connection removal; that is
in response to a 'delete' request they would unlink the backing filesystem
resources, get the inotify signal, and cause NM_SETTINGS_CONNECTION_REMOVED
to be emitted.
Unsaved connections don't have any backing resources, so they would never
get the signal emitted, and NMSettings would never forget about them.
Also, when monitor-connection-files=false in the configuration, obviously
the inotify signals will never come in because they aren't set up.
Given that we can no longer rely on inotify, it's best to just explicitly
send out the NM_SETTINGS_CONNECTION_REMOVED signal whenever a connection
is deleted via the D-Bus interface or internally.
The initscripts do this:
MATCH='^.+\.[0-9]{1,4}$'
if [[ "${DEVICE}" =~ $MATCH ]]; then
VID=$(echo "${DEVICE}" | LC_ALL=C sed 's/^.*\.\([0-9]\+\)/\1/')
PHYSDEV=${DEVICE%.*}
fi
MATCH='^vlan[0-9]{1,4}?'
if [[ "${DEVICE}" =~ $MATCH ]]; then
VID=$(echo "${DEVICE}" | LC_ALL=C sed 's/^vlan0*//')
# PHYSDEV should be set in ifcfg-vlan* file
if test -z "$PHYSDEV"; then
net_log $"PHYSDEV should be set for device ${DEVICE}"
exit 1
fi
fi
which means that if the VLAN name starts with "vlan" then
PHYSDEV must be set, otherwise the parent interface cannot
be determined.
Since PHYSDEV, if set, reflects the explicit intentions of the
user instead of assuming the name from DEVICE, make PHYSDEV
take precedence over determining the parent interface from
heuristics.
