When a fixed address is assigned by the P2P group owner, then the code
would set the IPv4 configuration method to DISABLED internally. However,
this causes issues, because it means that IPv4 is considered to not have
come up internally which can cause the connection to later time out even
though it was configured properly.
As such, map this method to MANUAL in this case. The AUTO mapping
becomes then:
* MANUAL: If the remote part is the GO and assigned an IP address
* DHCP: If the remote part is the GO and did not assign an address
* SHARED: If we are the GO
This fixes an issue where the connection established by GNOME Network
Displays would fail once IPv6 configuration also times out.
See-also: https://gitlab.gnome.org/GNOME/gnome-network-displays/-/issues/279https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1636
(cherry picked from commit d07383d3f3)
In constructed(), NMDevice starts watching the D-Bus name owner or
monitoring the unix socket, and so it is always aware if teamd is
running. When it is, NMDevice connects to it and initializes
priv->tdc.
It is not useful to try to connect to teamd in update_connection()
because warnings will be generated by NM and by libteam if teamd is
not running. As explained above the connection is always initialized
when teamd is available, and so we can just check priv->tdc.
Fixes: ab586236e3 ('core: implement update_connection() for Team')
https://bugzilla.redhat.com/show_bug.cgi?id=2182029https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1631
(cherry picked from commit 93430627c2)
Currently if the IPv6 link-local address is removed after it passed
DAD, NetworkManager tries to generate a new link-local address. If
this fails, which is always the case for EUI64, ipv6ll is considered
as failed and the connection can go down (depending on may-fail).
This is particularly bad for virtual interfaces because if somebody
removes the link-local address, the activation can fail and destroy
the interface, breaking all services that require it. Also, it's a
change in behavior introduced in 1.36.0.
It seems that a better approach here is to re-add the address that was
removed externally.
[bgalvani@redhat.com: since the branch is missing commit 7ca95cee15
('platform: always reconfigure IP routes even if removed externally'),
we need to set flag NM_L3CFG_CONFIG_FLAGS_FORCE_ONCE when committing
the address, otherwise it's not re-added]
Fixes: aa070fb821 ('core: add NML3IPv6LL helper')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1622
(cherry picked from commit 53ba9f4701)
Add per port priority support for bond active port re-selection during
failover. A higher number means a higher priority in selection. The
primary port still has the highest priority. This option is only
compatible with active-backup, balance-tlb and balance-alb modes.
(cherry picked from commit 2f0571f193)
sysfs is deprecated and kernel will not add new bond port options to
sysfs. Netlink is a stable API and therefore is the right method to
communicate with kernel in order to set the link options.
(cherry picked from commit bb435674b5)
Older versions of iproute2 don't support the "enclimit" argument. Work
around that from the unit tests.
Fixes: 1505ca3626 ('platform/tests: ip6gre & ip6gretap test cases (ip6 tunnel flags)')
(cherry picked from commit 640c82710f)
If the client was waiting for IPv6 DAD to complete and the lease was
updated or lost, `wait_ipv6_dad` needs to be cleared; otherwise, at
the next platform change the client will try to evaluate the DAD state
with a different or no lease. In particular if there is no lease the
client will try to decline it because there are no valid addresses,
leading to an assertion failure:
../src/core/dhcp/nm-dhcp-client.c:997:_dhcp_client_decline: assertion failed: (l3cd)
Backtrace:
__GI_raise ()
__GI_abort ()
g_assertion_message ()
g_assertion_message_expr ()
_dhcp_client_decline (self=0x1af13b0, l3cd=0x0, error_message=0x8e25e1 "DAD failed", error=0x7ffec2c45cb0) at ../src/core/dhcp/nm-dhcp-client.c:997
l3_cfg_notify_cb (l3cfg=0x1bc47f0, notify_data=0x7ffec2c46c60, self=0x1af13b0) at ../src/core/dhcp/nm-dhcp-client.c:1190
g_closure_invoke ()
g_signal_emit_valist ()
g_signal_emit ()
_nm_l3cfg_emit_signal_notify () at ../src/core/nm-l3cfg.c:629
_nm_l3cfg_notify_platform_change_on_idle () at ../src/core/nm-l3cfg.c:1390
_platform_signal_on_idle_cb () at ../src/core/nm-netns.c:411
g_idle_dispatch ()
Fixes: 393bc628ff ('dhcp: wait DAD completion for DHCPv6 addresses')
https://bugzilla.redhat.com/show_bug.cgi?id=2179890https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1594
(cherry picked from commit 24461954d0)
F_SETFL will reset the flags. That is wrong, as we only want to add
O_NONBLOCK flag and leaving the other flags alone. Usually, we would
need to call F_GETFL first.
Note that on Linux, F_SETFL can only set certain flags, so the
O_RDWR|O_CLOEXEC flags were unaffected by this. That means, most likely
there are no other flags that our use of F_SETFL would wrongly clear.
Still, it's ugly, because it's not obvious whether there might be other
flags.
Avoid that altogether, by setting the flag already during open().
Fixes: 67e092abcb ('core: better handling of rfkill for WiMAX and WiFi (bgo #629589) (rh #599002)')
(cherry picked from commit 62a85fa845)
"wifi.seen-bssids" looks like a regular property, but it is not. Unlike
almost all other properties, it does not contain user configuration,
rather it gets filled by the daemon.
The values are thus stored in "/var/lib/NetworkManager/seen-bssids"
file, and the daemon maintains the values separately from the profile.
Only before exporting the profile on D-Bus, the value gets merged (see
NM_SETTINGS_CONNECTION_GET_PRIVATE(self)->>getsettings_cached and
nm_connection_to_dbus_full().
Hence, looking at nm_setting_wireless_get_num_seen_bssids() is not
working. Fix that.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1253
Fixes: 0f3203338c ('wifi: roam aggressively if we on a multi-AP network')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1577
(cherry picked from commit 07c6f933d1)
If the automatically selected channel for an AP is set as NO-IR in the
current regulatory domain, the hotspot connection will fail to
start. NO-IR means that any mechanisms that initiate radiation are not
permitted on this channel, this includes sending probe requests or
modes of operation that require beaconing such as AP. Skip channels
with the NO-IR flag.
(cherry picked from commit 1399aa925d)
g_random_*() is based on GRand, which is not a CSPRNG. Instead, rely on
kernel to give us good random numbers, which is what nm_random_*() does.
Note that nm_random_*() calls getrandom() (or reads /dev/urandom), which
most likely is slower than GRand. It doesn't matter for our uses though.
It is cumbersome to review all uses of g_rand_*() whether their usage of
a non-cryptographically secure generator is appropriate. Instead, just
always use an appropriate function, thereby avoiding this question. Even
glib documentation refers to reading "/dev/urandom" as alternative. Which
is what nm_random_*() does. These days, it seems unnecessary to not use
the best random generator available, unless it's not fast enough or you
need a stable/seedable stream of random numbers.
In particular in nmcli, we used g_random_int_range() to generate
passwords. That is not appropriate. Sure, it's *only* for the hotspot,
but still.
(cherry picked from commit 6e96d71731)
The compiler may dislike this:
CC src/core/platform/tests/libNetworkManagerTest_la-test-common.lo
In function '_ip_address_add',
inlined from 'nmtstp_ip4_address_add' at ../src/core/platform/tests/test-common.c:1892:5:
../src/core/platform/tests/test-common.c:1807:63: error: array subscript 'NMIPAddr {aka const struct _NMIPAddr}[0]' is partly outside array bounds of 'in_addr_t[1]' {aka 'unsigned int[1]'} [-Werror=array-bounds]
1807 | peer_address->addr4,
| ~~~~~~~~~~~~^~~~~~~
../src/core/platform/tests/test-common.c: In function 'nmtstp_ip4_address_add':
../src/core/platform/tests/test-common.c:1886:36: note: object 'peer_address' of size 4
1886 | in_addr_t peer_address,
| ~~~~~~~~~~~~^~~~~~~~~~~~
...
Fixes: 06aafabf14 ('platform/test: add test adding IPv4 addresses that only differ by their peer-address')
(cherry picked from commit 40dd8bf93a)
When reloading the configuration and there is a global DNS
configuration without domains, NM crashes in global_dns_equal()
because `old->domains` and `new->domains` are both NULL. Fix that.
Thread 1 "NetworkManager" received signal SIGTRAP, Trace/breakpoint trap.
0 g_logv (log_domain=0x7fe81a2110be "GLib", log_level=G_LOG_LEVEL_CRITICAL, format=<optimized out>, args=<optimized out>) at ../glib/gmessages.c:1433
1 g_log (log_domain=<optimized out>, log_level=<optimized out>, format=<optimized out>) at ../glib/gmessages.c:1471
2 g_hash_table_size (hash_table=<optimized out>) at ../glib/ghash.c:2183
3 g_hash_table_size (hash_table=<optimized out>) at ../glib/ghash.c:2181
4 global_dns_equal (new=0xecc540, old=0xe618e0) at ../src/core/nm-config-data.c:1466
5 nm_config_data_diff (old_data=old_data@entry=0xe60020, new_data=new_data@entry=0xe606a0) at ../src/core/nm-config-data.c:1946
6 _set_config_data (self=0xe45810, new_data=0xe606a0, reload_flags=NM_CONFIG_CHANGE_CAUSE_SIGHUP) at ../src/core/nm-config.c:2923
7 nm_config_reload (self=0xe45810, reload_flags=NM_CONFIG_CHANGE_CAUSE_SIGHUP, emit_warnings=emit_warnings@entry=1) at ../src/core/nm-config.c:2875
8 nm_main_config_reload (signal=<optimized out>) at ../src/core/main.c:141
9 sighup_handler (user_data=<optimized out>) at ../src/core/main-utils.c:26
10 g_main_dispatch (context=0xe619e0) at ../glib/gmain.c:3444
11 g_main_context_dispatch (context=0xe619e0) at ../glib/gmain.c:4162
12 g_main_context_iterate.constprop.0 (context=0xe619e0, block=1, dispatch=1, self=<optimized out>) at ../glib/gmain.c:4238
13 g_main_loop_run (loop=0xe5e310) at ../glib/gmain.c:4438
14 main (argc=<optimized out>, argv=<optimized out>) at ../src/core/main.c:515
Fixes: 1f0d1d78d2 ('dns-manager: always apply options from [global-dns]')
(cherry picked from commit ba4a9ea79a)
The global configuration now can be valid when there are no global
domains defined. The dnsmasq backend must process it and then, if
there is no global default domain, also process the per-connection
settings.
Fixes: 1f0d1d78d2 ('dns-manager: always apply options from [global-dns]')
(cherry picked from commit 5c0a927e0f)
We are passing to the plugin only 'sett_flags', which is the bitmask
of flags to change and works together with 'sett_mask'; however,
plugins interpret that value as the new flags value. The result is
that if there is no change needed (0/0), the existing flags are lost.
Simple reproducer:
ip link add dummy1 type dummy
ip link set dummy1 up
ip addr add dev dummy1 fd01::12/64
sleep 1
# now, a external connection is created by NM
echo "BEFORE:"
cat /run/NetworkManager/system-connections/dummy1.nmconnection | grep "nm-generated\|volatile\|external"
# just add a new address to the interface to make it lose
# the external flag
ip addr add dev dummy1 172.25.42.1/24
sleep 1
echo "AFTER:"
cat /run/NetworkManager/system-connections/dummy1.nmconnection | grep "nm-generated\|volatile\|external"
Output:
BEFORE:
nm-generated=true
volatile=true
external=true
AFTER:
Fixes: d35d3c468a ('settings: rework tracking settings connections and settings plugins')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1548
(cherry picked from commit 86b922695f)
To embrace the inclusive language, deprecate the NMActiveConnection
Master property and in favor of the NMActiveConnection Controller
property.
(cherry picked from commit af677542b5)
This setting allows the user to remove the local route rule that is
autogenerated for both IPv4 and IPv6. By default, NetworkManager won't
touch the local route rule.
(cherry picked from commit d2ca44ffc6)
A tentative IPv6 address can still fail DAD, so don't use it to
resolve the hostname via DNS. Furthermore, tentative addresses can't
be used to contact the nameserver and so the resolution will fail if
there is no other valid IPv6 address. Wait that the address becomes
non-tentative.
(cherry picked from commit 4138be6a5a)
Currently the only way to return an error code from the daemon helper
is via the process exit code, but that is not enough to fully describe
an error from getaddrinfo(); in fact, the function returns a EAI_*
error code and when the value is EAI_SYSTEM, the error code is
returned in errno.
At the moment, any messages printed to stderr by the helper goes to NM
stderr; instead, we want to capture it and pass it through the logging
mechanism of NM, so that it can be filtered according to level and
domain.
(cherry picked from commit d65702803c)
Improve logging:
- log only when something changes
- print the new resolver state, instead of the old one
- rename state "in-progress" to "started"
- log when the resolver state is reset due to DNS changes
(cherry picked from commit 7037aa66c6)
This is also the format that we will use to expose it in the lease
information. It's the format that dhclient uses.
(cherry picked from commit 2fe4313b92)
We already get the IAID from the dhclient environment. This is actually
rather useful, because dhclient plugin does not support setting the
value (that is, what we request in "config.v6.iaid" is not actually
used). Already previously, was the IAID for dhclient present in the
lease information. Now also normalize/verify it.
Expose the used IAID also with the internal (systemd) plugin. There we
explicitly set the IAID and know it.
(cherry picked from commit 07f1789725)
Our lease is tracked in a plain string dictionary. For dhclient plugin
and similar, the keys are received via the environment, they are thus
unlimited. For the internal plugins they are known at compile time and
static strings. We thus sometimes need to clone the string, and
sometimes not.
Unfortunately, we cannot ask the GHashTable whether it has a free
function for the key, so we need to explicitly tell it. Add a parameter
for that.
(cherry picked from commit 5a05ba398b)
There should be one function for parsing the string. Use it everywhere.
Also, because we will accept specifying the IAID as hex string so the
same parsing code should be used everywhere.
(cherry picked from commit 69106d0aef)
When a software device is deactivated, normally we schedule a idle
task to unrealize the device (delete_on_deactivate). However, if a new
activation is enqueued on the same device (and that implies that the
new profile is compatible with the device), then the idle task is not
scheduled and the device will normally transition to the different
states (disconnected, prepare, config, etc.).
For ovs-interfaces, we remove the db entry on disconnect and that
makes the link go away; however, we don't clear the hw_addr* fields of
the device struct.
When the new link appears, we try to set the new cloned MAC but the
stale hw_addr field indicates that it's already set. Avoid this
problem by updating the address as soon as the link appears.
https://bugzilla.redhat.com/show_bug.cgi?id=2168477https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1532
(cherry picked from commit d403ac3d40)
- Only consider preferred context of "internet" type. There can be
multiple preferred contexts of multiple types, and we care about
"internet" type only.
- Don't check for "internet+mms" type. It turns out that "internet+mms"
isn't a thing in oFono, and is used to represent "internet" context
with MMSC in the lomiri-system-setting's UI only.
Fixes: 9fc72bf75d ('wwan/ofono: create connections based on available contexts')
Bug-UBports: https://gitlab.com/ubports/development/core/packaging/network-manager/-/issues/3
(cherry picked from commit 08a38ed619)
Trigger a dispatcher event when a connection is reapplied on a NM device.
Some devices such as phones have already a DHCP client running for accepting
connections when they are plugged into USB to transfer data over SSH.
When NetworkManager switches the connection IP method to shared,
it spawns a dnsmasq process to handle DHCP and DNS for that connection.
However, a dispatcher event is needed to disable the external DHCP server
for these USB connections as NetworkManager's dnsmasq handles them now.
Moreover, when the connection method is switched to a different mode,
the external DHCP server needs to be spawned again to make sure that
SSH connections are still possible to the device.
To achieve this, add a new NetworkManager Dispatcher event
'reapply' which is triggered when a connection is reapplied on a NM
device. This way, a dispatcher script can handle the case above by
inspecting the IP method in the dispatcher script.
(cherry picked from commit cef880c66f)
The onlink flag is part of each next hop.
When NetworkManager configures ECMP routes, we won't support that. All
next hops of an ECMP route must share the same onlink flag. That is fine
and fixed by this commit.
What is not fine, is that we don't track the rtnh_flags flags in
NMPlatformIP4RtNextHop, and consequently our nmp_object_id_cmp() is
wrong.
Fixes: 5b5ce42682 ('nm-netns: track ECMP routes')
(cherry picked from commit 6ed966258c)
If the route with a next hop is already onlink, we don't need to add a
direct route to the gateway.
It also wouldn't work previously, because the onlink route to the
gateway that we would add, would have no gateway and the RTNH_F_ONLINK
set. Kernel would reject that with an error. We would have to clear the
RTNH_F_ONLINK flag, if there is no gateway.
(cherry picked from commit 93b46c8906)
The dns-type must be included in the hash because it contributes to
the generated composite configuration. Without this, when the type of
a configuration changes (e.g. from DEFAULT to BEST), the DNS manager
would determine that there was no change and it wouldn't call
update_dns().
https://bugzilla.redhat.com/show_bug.cgi?id=2161957
Fixes: 8995d44a0b ('core: compare the DNS configurations before updating DNS')
(cherry picked from commit 46ccc82a81)
