When there are two patch ports connected, each of them must reference
the other; however they can't be created in a single transaction
because they are part of different bridges (so, different
connections). Therefore, the first patch that gets activated will
always fail with "No usable peer $x exists in 'system' datapath" until
the second patch exists.
In theory we could also match the error message, however this doesn't
seem very robust as the message may slightly change in the future.
(cherry picked from commit ffeac35f04)
(cherry picked from commit 75cbf21738)
(cherry picked from commit 399aad15bf)
(cherry picked from commit 692689ead8)
When the server is restarted the write to unix socket fails with
EPIPE. In such case, don't fail all the calls in queue; instead, after
a sync of the ovsdb state (through a monitor call), start processing
the queue again, including the call that previously failed.
Add a retry counter to avoid that calls are stuck in the queue forever
in a hypothetical scenario in which the write always fails.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/459
(cherry picked from commit db37e530e8)
(cherry picked from commit 54254bf6fe)
(cherry picked from commit 166ad887f9)
If we change the the MTU of an ovs interface only through netlink, the
change could be overridden by ovs-vswitchd at any time when other
interfaces change. Set the MTU also in the ovsdb to prevent such
changes.
Note that if the MTU comes from the connection, we already set the
ovsdb MTU at creation time and so this other update becomes
useless. But it is needed when changing the MTU at runtime (reapply)
or when the MTU comes from a different source (e.g. DHCP).
(cherry picked from commit c2a9712945)
(cherry picked from commit e27a59c69e)
(cherry picked from commit 99ef891db6)
The ovs-vswitchd.conf.db(5) man page says about the the mtu_request
column in the Interface table:
"Requested MTU (Maximum Transmission Unit) for the interface. A
client can fill this column to change the MTU of an
interface [...] If this is not set and if the interface has
internal type, Open vSwitch will change the MTU to match the
minimum of the other interfaces in the bridge."
Therefore, if the connection specifies a MTU, set it early when adding
the interface to the ovsdb so that it will not be changed to the
minimum of other interfaces.
(cherry picked from commit ad12f26312)
(cherry picked from commit 7311d5e294)
(cherry picked from commit b81370f70b)
Introduce a nm_ovsdb_set_interface_mtu() function to update the MTU of
an ovs interface in the ovsdb.
(cherry picked from commit a4c2c1a843)
(cherry picked from commit c1be15a66e)
(cherry picked from commit 990f46505d)
When the ovs interface gets deactivated, it is released from the
master port and we call nm_device_update_from_platform_link (dev,
NULL) to ignore any later event for the interface. This is important
especially because it sets a zero ifindex on the interface and so,
later when the link disappears, we don't unmanage the device but
directly remove it.
However, since ovs commands are queued, the link could appear during
the deactivation and we need to ignore such events. Add a new device
method can_update_from_platform_link() for such purpose.
(cherry picked from commit e9fc1dea43)
(cherry picked from commit c4eb0c6852)
(cherry picked from commit 34a9247a64)
Tracking the deletion of link by ifindex is difficult because the
ifindex of the device is updated through delayed (idle) calls in
NMDevice and so there is the possibility that at a certain time the
device ifindex is not in sync with platform state. It seems simpler to
watch instead the interface name. The ugly thing is that the interface
name can be changed externally, but if users do that on an activating
device they are looking for trouble.
Also change the deactivate code to deal with the scenario where we
already created the interface in the ovsdb but the link didn't show up
yet. To ensure a proper cleanup we must wait that the link appears and
then goes away; however the link may never appear if vswitchd sees
only the last state in ovsdb, and so we must use a ugly timeout to
avoid waiting forever.
https://bugzilla.redhat.com/show_bug.cgi?id=1787989
(cherry picked from commit 9c49f8a879)
(cherry picked from commit 2e5e409bf2)
(cherry picked from commit 628706fab5)
When we deactivate a virtual device, we usually schedule the deletion
of the link in an idle handler. That action will be executed at a
later time when the device is already in the disconnected state.
Similarly, for ovs interfaces we send the deletion command to the
ovsdb and then proceed to the disconnected state.
However, in the first case there is the guarantee that the link will
be deleted at some point, while for ovs interfaces it may happen that
ovs decides to reuse the same link if there is an addition
queued. Since reusing the same link confuses NM, let's implement
deactivate_async() for ovs-interfaces and wait that the link actually
goes away before proceeding.
https://bugzilla.redhat.com/show_bug.cgi?id=1782701https://gitlab.freedesktop.org/NetworkManager/NetworkManager/merge_requests/402
(cherry picked from commit 623a1e1f99)
(cherry picked from commit a1b0edd24b)
(cherry picked from commit cb7c7c29bd)
This doesn't make any difference in practice, but it seems more correct.
It would cause issues if we decided to remove an interface from the
signal handler.
(cherry picked from commit e948ce7deb)
When an interface (other OVS device types can not fail) encounters an error
it indicates it by changing the error column. Watch for those changes so
that we can eventually communicate them to the OVS factory to deal with
them.
(cherry picked from commit f2c066e104)
Don't crash in situations, where the bridge or a port has a child with
UUID we don't know. This could happen if we mess up the parsing of
messages from OVSDB, but could also theoretically happen in OVSDB sends
us bad data.
(cherry picked from commit 99c7adc1e1)
For ip-tunnel modes that encapsulate layer2 packets (gretap and
ip6gretap) we allow the presence of an ethernet setting in the
connection and honor the cloned-mac-address specified in it.
For all other modes, the ethernet setting is removed during
normalization, but a value different from 'preserve' could be set via
global default.
The kernel doesn't allow setting a MAC for layer3 devices, don't do
it.
(cherry picked from commit 0494a84878)
(cherry picked from commit 78ed14166c)
(cherry picked from commit d69d92c658)
(cherry picked from commit 60b4bdafcf)
Avoid g_ascii_strtoull() calling directly. It has subtle issues, which is why
we have a wrapper for it.
(cherry picked from commit 659ac9cc12)
(cherry picked from commit 62469c1401)
(cherry picked from commit 386ea3ff26)
Fail the enslavement of the ovs port if the bridge device is not
found, instead of generating assertions and potentially crash later.
https://bugzilla.redhat.com/show_bug.cgi?id=1797696
Fixes: 101e65d2bb ('ovs: allow changing mac address of bridges and interfaces')
(cherry picked from commit c5c49995b1)
(cherry picked from commit 7494a2e37a)
(cherry picked from commit bb7f729eca)
The previous code tried to get the bridge active connection and it
used the port active connection instead in case of failure. This
doesn't seem right, as in nm-ovsdb.c the bridge AC is used to get the
bridge settings (including the uuid, interface name, and cloned mac).
In case of failure getting the bridge AC we should just fail.
Fixes: 830a5a14cb ('device: add support for OpenVSwitch devices')
(cherry picked from commit c8b5a3f91a)
(cherry picked from commit d8fb95d22b)
(cherry picked from commit 323a557f74)
Surisingly, the compiler may detect the remaining obj_type in
the default switch. Then, inlining nmp_class_from_type() it may detect
that this is only possible to hit with an out or range access to
_nmp_classes array.
Rework the code to avoid that compiler warning. It's either way not
supposed to happen.
Also, drop the default switch case and explicitly list the enum values.
Otherwise it is error prone to forget a switch case.
(cherry picked from commit 9848589fbf)
(cherry picked from commit 6f189da7b6)
(cherry picked from commit 6da20c24cd)
GCC 10 complains about accesses to elements of zero-length arrays that
overlap other members of the same object:
src/platform/nm-platform-utils.c: In function ‘nmp_utils_ethtool_get_permanent_address’:
src/platform/nm-platform-utils.c:854:29: error: array subscript 0 is outside the bounds of an interior zero-length array ‘__u8[0]’ {aka ‘unsigned char[0]’} [-Werror=zero-length-bounds]
854 | if (NM_IN_SET (edata.e.data[0], 0, 0xFF)) {
./shared/nm-glib-aux/nm-macros-internal.h:731:20: note: in definition of macro ‘_NM_IN_SET_EVAL_N’
Fix this warning.
(cherry picked from commit d892a35395)
(cherry picked from commit c1417087c8)
(cherry picked from commit f7b9d06306)
GCC 10 complains about accesses to elements of zero-length arrays that
overlap other members of the same object:
src/platform/nm-platform-utils.c: In function ‘ethtool_get_stringset’:
src/platform/nm-platform-utils.c:355:27: error: array subscript 0 is outside the bounds of an interior zero-length array ‘__u32[0]’ {aka ‘unsigned int[0]’} [-Werror=zero-length-bounds]
355 | len = sset_info.info.data[0];
| ~~~~~~~~~~~~~~~~~~~^~~
In file included from src/platform/nm-platform-utils.c:12:
/usr/include/linux/ethtool.h:647:8: note: while referencing ‘data’
647 | __u32 data[0];
| ^~~~
Fix this warning.
(cherry picked from commit 16e1e44c5e)
(cherry picked from commit 286bb2f029)
(cherry picked from commit b474ed0044)
curl_multi_setopt() accepts CURLMOPT_* options, not CURLOPT_*
ones. Found by GCC 10:
clients/cloud-setup/nm-http-client.c:700:38: error: implicit conversion from ‘enum <anonymous>’ to ‘CURLMoption’ [-Werror=enum-conversion]
700 | curl_multi_setopt (priv->mhandle, CURLOPT_VERBOSE, 1);
Fixes: 69f048bf0c ('cloud-setup: add tool for automatic IP configuration in cloud')
(cherry picked from commit c11ac34f4c)
(cherry picked from commit 7ba2040caa)
(cherry picked from commit fb4d8705dd)
If a device is being autoactivated and requires a parent that is
blocked due to user request, the autoactivation attempt should fail
because NM shouldn't overrule the user decision.
https://bugzilla.redhat.com/show_bug.cgi?id=1765566
(cherry picked from commit f2dbf8fbc0)
(cherry picked from commit 61d431a9e8)
(cherry picked from commit 74649429df)
g_ascii_strtoull() returns a guint64, which is very wrong to directly pass
to the variadic argument list of g_object_set(). We expect a guint there
and need to cast.
While at it, use _nm_utils_ascii_str_to_int64() to parse and validate the input.
(cherry picked from commit d506823d4f)
(cherry picked from commit 24177569c1)
(cherry picked from commit 0a10468d79)
We try to set only one time the MTU from the connection to not
interfere with manual user changes.
If at some point the parent interface changes temporarily MTU to a
lower value (for example, because the connection was reactivated), the
kernel will also lower the MTU on child interface and we will not
update it ever again.
Add a workaround to this. If we detect that the MTU we want to set
from connection is higher that the allowed one, go into a state where
we follow the parent MTU until it is possible to set again the desired
MTU. This is a bit ugly, but I can't think of any nicer way to do it.
https://bugzilla.redhat.com/show_bug.cgi?id=1751079
(cherry picked from commit ec28f5b343)
(cherry picked from commit 49857ed279)
A MACsec connection doesn't have an ordering dependency with its
parent connection and so it's possible that the parent gets activated
later and sets a greater MTU than the original one.
It is reasonable and useful to keep the MACsec MTU configured by
default as the maximum allowed by the parent interface, that is the
parent MTU minus the encapsulation overhead (32). The user can of
course override this by setting an explicit value in the
connection. We already do something similar for VLANs.
https://bugzilla.redhat.com/show_bug.cgi?id=1723690
(cherry picked from commit 438a0a9ad5)
(cherry picked from commit c58ce8945d)
Introduce a generic function to set a MTU based on parent's one. Also
define a device-specific @mtu_parent_delta value that specifies the
difference from parent MTU that should be set by default. For VLAN it
is zero but other interface types (for example MACsec) require a
positive value due to encapsulation overhead.
(cherry picked from commit 5cf57f4522)
(cherry picked from commit 73597864bb)
svUnsetValue (ifcfg, KEY);
if (condition)
svSetValue* (ifcfg, KEY, ...);
is not good. It requires first clearing the value, before setting
it again.
Various cleanup to fix such uses.
(cherry picked from commit 5028206ec4)
(cherry picked from commit b67983c387)
The signal is unused (and should be removed).
Still, the parameter passed to g_signal_emit() is a C string, not a
GVariant. I think as there are no subscribers, glib wouldn't actually
do anything with the arguments. Though, I am not sure whether glib still
tries to initialize a GValue with a GVariant type, leading to a crash.
Fixes: f05b7a78c9 ('supplicant: Track P2P Group information, creation and destruction')
(cherry picked from commit c106008091)
(cherry picked from commit 26d6ac5385)
(cherry picked from commit dc9322c0a9)
Oddly enough, valgrind was not complaining about this leak...
Fixes: 87b2d783b6 ('core: accept 'ssids':aay option in RequestScan() dictionary parameter')
(cherry picked from commit 5ed1edc02a)
(cherry picked from commit 568c19f07d)
(cherry picked from commit fff235e3a5)
The autoconnection for virtual devices currently works in two
phases. First we detect that there is suitable profile that can
autoconnect and we realize the device. Then, when the device becomes
'disconnected', autoconnect kicks in and starts the activation.
However, if autoconnect is blocked for a device, currently we do step
1 without step 2, leaving a stale interface around. Fix this by also
checking that autoconnect is not blocked during step 1.
https://bugzilla.redhat.com/show_bug.cgi?id=1765047https://gitlab.freedesktop.org/NetworkManager/NetworkManager/merge_requests/360
(cherry picked from commit 6c716912eb)
(cherry picked from commit 944ff9f9dc)
(cherry picked from commit cbb1ad1ba7)
If the activation of an assumed device fails, we first set the device
state to FAILED and then to ACTIVATED. In the FAILED state, the active
connection transitions to DEACTIVATED and clears its device pointer;
hence we end up with an inconsistent state which causes assertion
failures in other parts of the code (for example, get_best_ip_config()
assumes that the device of the best active connection is not NULL).
Don't first transition to FAILED and then to ACTIVATED, just set the
latter.
https://bugzilla.redhat.com/show_bug.cgi?id=1737774https://gitlab.freedesktop.org/NetworkManager/NetworkManager/merge_requests/351
(cherry picked from commit 93e9010b75)
(cherry picked from commit 366b90db87)
(cherry picked from commit 8274cc1353)
