* Exorcise encryption key hashing on APs
* Use libnm-util's serialization/deserialization in both the
applet and NM
* Random other stuff
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1198 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
src/NetworkManagerWireless.c
- Rearrange 802.11 wireless-specific capabilities again
* src/Makefile.am
- Forgot to add wpa.c/wpa.h to the makefiles
* src/NetworkManagerAP.[ch]
- Implement access point capabilities and parse the
WPA/RSN IEs into the capability bitfield
- Switch the "encrypted" attribute to utilize the bitfield
and capabilities rather than being independent
* src/NetworkManagerDevice.c
- (nm_device_wireless_get_activation_ap): break it horribly
until we can push NMAPSecurity objects into access point
objects and through the activation chain
- Stuff WPA & RSN IEs into AP capabilities
* src/nm-dbus-nm.c
- Take a shot at actually making setActiveDevice work
* src/wpa.[ch]
- Make the API a bit saner
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1191 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-ap-security*.[ch]
- Add AP security abstractions to NetworkManager
* src/nm-dbus-device.c
- Begin to parse new format dbus messages from the applet
and construct an AP security object from the message
* libnm-util/dbus-helpers.c
- Use message iters so we can append the key as a fixed
array of bytes, which actually works rather than
using dbus_message_append_args() as we were before
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1184 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Move NetworkManager.h -> include/NetworkManager.h
* Split out VPN stuff to include/NetworkManagerVPN.h
* Fix up makefiles to include new location
* Fix up sources to include NetworkManagerVPN.h
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1130 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Start using libnl. You need 1.0-pre3 or higher. Eventually
we should replace most of the distro-specific backend code
with libnl stuff.
Get it here: http://people.suug.ch/~tgr/libnl/
* configure.in
src/Makefile.am
- Add checks for libnl pkgconfig file
- Use LIBNL_LIBS & LIBNL_CFLAGS
* src/NetworkManagerSystem.c
src/nm-ip4-config.[ch]
- Use libnl rather than ioctl() for most things
- Remove unused functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1082 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-dbus-info.c
gnome/applet/applet-dbus-info.h
- (nmi_dbus_update_network_auth_method->nmi_save_network_info): generalize
to store key, key type, and auth method rather than just auth method
- (nmi_dbus_update_network_info): new function
- (nmi_dbus_info_message_handler): updateNetworkAuthMethod -> updateNetworkInfo
* gnome/applet/passphrase-dialog.c
- (nmi_passphrase_dialog_ok_clicked): call nmi_save_network_info() instead
of saving the info ourselves
* gnome/libnm_glib/libnm_glib.c
- Remove the stupid version check for dbus
* src/NetworkManagerAP.c
src/NetworkManagerAP.h
- (nm_ap_get_enc_key_source): return 'const char *' rather than 'char *'
* src/NetworkManagerDbus.c
src/NetworkManagerDbus.h
- (nm_dbus_update_network_auth_method -> nm_dbus_update_network_info): Update
more than just the auth method
* src/NetworkManagerDevice.c
- Update network info at the appropriate times
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@817 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Kill dhcpcd. We now use "dhcdbd", a dbus daemon that controls dhclient.
This means that NetworkManager shouldn't have DHCP issues anymore. It also
means you need dhcdbd, which you can get here (get the latest one):
http://people.redhat.com/jvdias/dhcdbd/
Technically NetworkManager can use any DHCP daemon that uses the same DBUS
interface as dhcdbd.
* Rewrite device activation to facilitate the new DHCP infrastructure and
future improvements. Its now "activation request" based, ie there is a single
activation request composed of the device, access point, and other info which
follows the entire activation process. There are 5 stages of the activation
process which correspond to:
1) Device preparation
2) Device configuration (bring it up, set ESSID/Key/etc)
3) IP Config Start (fire off DHCP if we're using it)
4) IP Config Get (grab config from DHCP or static config files)
5) IP Config Commit (set device's IP address, DNS, etc)
Note that there is no longer a "scanning" step, since the access point must
be known _before_ activation starts. If the access point drops out or does
not exist for some reason, the entire activation process fails and must be
restarted for a different access point or device.
Patch from Bill Moss:
* gnome/applet/applet.c
- Fix type of vpn_failure dialog -> vpn_banner dialog
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@597 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Merge the applet and the info-daemon, and move the converged
applet under gnome/applet
* Move libnm_glib to gnome/libnm_glib
* Convert most dbus calls between the applet, info-daemon, and NM
into async calls
* Fix a few things valgrind noticed
* Make NM broadcast state more reliably
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@586 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Initial VPN Support
- supports 'vpnc'
- reworks device IP configuration, backend files have changed and will need
to be updated for all distributions. I will try to do what I can for
them, but I cannot test them.
- Move named directory to src/named-manager
- Make backends directory self-contained
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@571 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Third (unfinished, partially working) cut at porting to
dbus 0.30 api and new hal.
* info-daemon/NetworkManagerInfoDbus.c:
don't free null arrays.
* panel-applet/NMWirelessAppletDbus.c:
* src/nm-dbus-device.c:
* src/nm-dbus-net.c:
* src/NetworkManagerDbus.c: more
STRING -> OBJECT_PATH fun
* src/NetworkManagerDevice.c:
* src/NetworkManagerDevice.h:
(rename nm_device_get_link_active): rename to
nm_device_has_active_link
(nm_device_wireless_link_active): rename to
nm_device_probe_wireless_link_state
(nm_device_wired_link_active): rename to
nm_device_probe_wired_link_state. Rewrite to
use carrier file since hal doesn't maintain
link state anymore.
(nm_device_update_link_active): rename to
nm_device_update_link_state
* src/NetworkManagerPolicy.c
(nm_policy_activation_finish): check for NULL
MAC address.
* src/Makefile.am:
* src/NetworkManagerMain.h:
* src/NetworkManager.c:
* src/nm-netlink-monitor.c:
* src/nm-netlink-monitor.h: New class to support
monitoring wired ethernet link status, since HAL
doesn't export that information anymore.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@495 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/essid.glade
panel-applet/NMWirelessAppletOtherNetworksDialog.c
- Correct spelling of "adaptor"->"adapter"
2005-02-18 William Jon McCann <mccann@jhu.edu>
* panel-applet/NMWirelessApplet.c: Use GTK_CHECK_VERSION() macro.
(nmwa_about_cb): Use standard copyright string. Update comment
text to reflect that it is a notification area applet. Remove
leading newline in authors list.
(nmwa_menu_show_cb, nmwa_setup_widgets): Populate menu on show
instead of on parent menu item activation. Fixes#167550.
2005-02-18 William Jon McCann <mccann@jhu.edu>
* panel-applet/essid.glade: Capitalize items as per HIG.
Fixes#167632
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@458 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Dan Reed: DHCP options D-BUS API
Exposes the DHCP options that a device receives to clients over D-BUS.
* configure.in
- A few cleanups
* dhcpcd/client.h
- Correct names, option length, and types for DHCP options
* dhcpcd/dhcpcd.[ch]
- Clarify function names that access DHCP options & data
* src/NetworkManagerDHCP.c
- Use new DHCP data access functions
* src/NetworkManagerDbus.c
- Message handler for DHCP functions
* src/nm-dbus-dhcp.[ch] (new)
- DHCP dbus methods
* test/nm-dhcp-opt-test.c
- Test DHCP D-BUS API and return all present DHCP options
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@444 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- (dhcp_init): only print out client ID and class ID if they are specified
* src/NetworkManagerDbus.[ch]
src/nm-dbus-nm.[ch]
src/nm-dbus-device.[ch]
src/nm-dbus-net.[ch]
- Move NM, Device, and Net functions to separate files and use the
dbus method list stuff in NetworkManagerDbusUtils.c to do
method dispatching
* src/NetworkManagerDbusUtils.c
- Add new validate_method called before each dispatch (if present)
that can validate the method call
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): Fix misplaced "!" that caused signal
levels never to be evaluated
Patch from j@bootlab.org
* src/NetworkManagerDevice.c
- Add typedef for "u64"
* src/backends/NetworkManagerDebian.c
- Copy in Dave Woodhouse's fixes for IPv6
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@438 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.[ch]
- Add a context menu that contains:
Pause/Resume Wireless Scanning
Stop/Start All Wireless Devices
About...
- Grab active device strength off active device,
not its network
* panel-applet/NMWirelessAppletDbus.[ch]
- Add DBUS accessors for "getSupportsCarrierDetect", "setScanningEnabled",
"getScanningEnabled", "setWirelessEnabled", and "getWirelessEnabled"
- Update active device strength every 2 seconds, not every 1 second
* panel-applet/menu-info.c
- Only disable wired devices in the menu when they support carrier detection,
and don't currently have a link. Non-carrier-detect devices will always
remain choosable
* src/Makefile.am
src/NetworkManagerDbusUtils.[ch]
- Add new new dbus utils sources
* src/NetworkManager.c
- Fixes for new link detection, we no longer need to call nm_device_update_link_active()
with the boolean parameter
- Set scanning_enabled & wireless_enabled to TRUE
* src/NetworkManagerDbus.c
- Use new dbus util method dispatcher functions for org.freedesktop.NetworkManager methods
- Implement scanning & wireless enable/disable calls
- Remove the dbus vtable unregister handlers, weren't doing anything with them anyway
* src/NetworkManagerDevice.c
- New link detection stuff again...
o Create device's mainloop earlier (but don't run it earlier)
o Hook up new carrier-detect support stuff
o Add in the ethtool & mii support detection code
- Don't scan if scanning is disabled
* src/NetworkManagerPolicy.c
- Never automatically choose a device that doesn't support carrier detection
- Don't automatically choose a wireless device if wireless is disabled
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@416 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm_glib/
- Client library for applications using glib
* configure.in
various Makefiles
- Split NM_CFLAGS and NM_LIBS into separate variables
like DBUS_*, HAL_* and GLIB_*
* src/NetworkManager.c
src/NetworkManagerMain.h
- (nm_schedule_status_signal_broadcast): at the earliest convenience,
broadcast a status changed signal over DBUS from the main thread.
Still unused anywhere for the moment.
Patch from j@bootlab.org
* panel_applet/NMWirelessAppletDbus.c
src/NetworkManagerDbus.c
- Correct INT32->UINT32 mistmatch between NM and the panel applet
for the "getMode" method call
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@368 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Rework the DHCP client code to be much less chatty when
it receives non-DHCP UDP packets during the DHCP run
(reported by and preliminary patches from Bill Moss)
* Move wireless scanning to a separate thread. This thread forwards the
results to the main thread when done where they are integrated into
the device's access point lists. This keeps the main thread (which
does all the DBUS communication) from being blocked for long periods
of time by wireless scanning.
* Make state modification an idle routine in the main loop, and trigger
state changes rather than polling for them.
* src/backends/NetworkManagerGentoo.c
- Fix up invalid C90 code (reported by Christoph Ruessler)
* src/NetworkManagerDevice.c
- Revert IPv6 patch for wired devices from 2004-12-22 for
router advertisements, causing problems and infinite loop
during "best" device determination due to link going up/down
(reported by Bill Moss)
Apply patch from Peter Jones
* src/NetworkManagerDevice.c
- Shortcut for link-checking for ipw2x00 cards
- Split out association check into separate routine
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@360 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c (nm_data_new): Initialize named.
Also, set up a signal handler for SIGINT/SIGTERM, and exit
the mainloop when these signals are received.
(nm_data_free): Unref named.
(sigterm_handler, sigterm_pipe_handler): New functions for
exiting mainloop.
* src/NetworkManagerMain.h (NMData): Add signal handling and
nameserver bits.
* src/NetworkManager.c (nm_device_unref): Quit device mainloop on
unref.
* src/NetworkManagerDHCP.c (set_nameservers): New function;
set nameservers from DHCP response data.
(set_domain_search): Set domain search from DHCP response.
(nm_device_dhcp_configure): Invoke them.
* src/NetworkManagerSystem.c
(nm_system_device_update_resolv_conf): Delete. Deleting
code is totally sweet.
* src/Makefile.am (NetworkManager_LDADD): Add libnamed.
* named/nm-named-manager.h, named/nm-named-manager.c: New files;
implements an object which controls a nameserver. Currently
uses bind 9.
* configure.in: Check for named.
* Makefile.am (SUBDIRS): Add named dir.
* named/named.conf: New template config file.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@352 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tom Parker
* Add autoip/Link Local Addressing support when we fail to get a DHCP
address
* Longer pause after setting ESSID on cards that support a larger number
of channels to give the card time to find the right channel
* Add system hook to restart mDNSResponder (or whatever the local implementation
of Multicast DNS is) when we activate interfaces
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@341 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Major rework of the DHCP code, taking some cues from pump. We don't
write raw Ethernet packets anymore, which simplifies the code quite
a bit. The new code should be more robust, not hang in recvfrom()
as much, and generally work better. This also means that we need
to force HAL/dbus to use a created GMainContext rather than the
default context, since having the DHCP renew/rebind thread using
its own GMainContext seemed to give dbus a fit. There is also more
debugging information printed from the DHCP loop to help with future
problems.
* Also, if the DHCP server doesn't give us the "routersOnSubnet" option,
assume that the default gateway should be the DHCP server.
Patch from Matthew Schick <matt oss-institute org>
* src/backends/NetworkManagerGentoo.c
- Fix compilation error due to missing "ip4_broadcast"
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@336 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Major rework of link detection code. We now use DHCP
as part of the link detection which proves to be much more robust,
and also supports Open System authentication for wireless networks.
We no longer use external DHCP client programs. Instead, we use
our own DHCP client, based on substantially reworked bits of 'dhcpcd'
which was written by:
Yoichi Hariguchi <yoichi@fore.com>
Sergei Viznyuk <sv@phystech.com>
http://www.phystech.com/download/
It resides in the "dhcpcd" directory and was refactored into a general
purpose DHCP client library by me.
Also misc fixes (CPPFLAGS->AM_CPPFLAGS, move some stuff around),
move src/backends/NetworkManagerSystem.h -> src/NetworkManagerSystem.h
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@314 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tom Parker <palfrey@tevp.net>:
* src/Makefile.am (CPPFLAGS): Switch to AM_CPPFLAGS.
* src/backends/NetworkManagerRedHat.c: Switch to
including shvar.h instead of shvar.c.
* src/backends/NetworkManagerDebian.c: Don't include
interface_parser.c in source file.
(libnmbackend_la_SOURCES): Don't include shvar.[ch]
and interface_parser.[ch].
* src/Makefile.am (libnmbackend_la_SOURCES) <TARGET_REDHAT>:
Include shvar.c and shvar.h here.
(libnmbackend_la_SOURCES) <TARGET_DEBIAN>: Include
interface_parser.c and interface_parser.h here.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@310 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in: Strip out TARGET_DISTRO and
SYSTEM_BACKEND_FILE variables. Switch to Automake
conditionals.
* src/Makefile.am (noinst_LTLIBRARIES): Add libnmbackend.la.
(libnmbackend_la_SOURCES): Use Automake conditionals
to add distro-specific files.
* initscript/Makefile.am (SUBDIRS): Update to
use conditionals.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@309 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in: Generate config.h.
* configure.in: Dump dependency on OpenSSL; we can't
use it since this package is GPL:
http://www.gnome.org/~markmc/openssl-and-the-gpl.html
Instead, check for libgcrypt, use it if available,
otherwise use included MD5 code.
* src/gnome-keyring-md5.h, src/gnome-keyring-md5.c:
Suck in from gnome-keyring, munge a bit.
* src/Makefile.am (NetworkManager_SOURCES) <!WITH_GCRYPT>: Include
gnome-keyring-md5.h gnome-keyring-md5.c.
(NetworkManager_LDADD) <WITH_GCRYPT>: Add dep on LIBGCRYPT_LIBS.
* src/NetworkManagerWireless.c (nm_md5): New function, uses
libgcrypt or included gnome-keyring md5 bits.
(nm_wireless_128bit_key_from_passphrase): Use nm_md5.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@101 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
src/Makefile.am
src/NetworkManagerDevice.c
src/NetworkManager.c
src/NetworkManagerUtils.[ch]
src/backends/NetworkManagerSystem.h
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerGentoo.c
- Refactor system-specific code into separate backends for
each distribution
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@62 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* initscript/NetworkManager
- Check for /sbin/ip
- Do sysctl magic that network service does
- sleep 4s after start to allow network time to come up [hack]
* src/Makefile.am
src/NMLoadModules
- Load all network device kernel modules (hal doesn't know devices
are ethernet until the module is loaded, and therefore we don't know)
* src/NetworkManager.c
- (main): daemonize later, launch NMLoadModules to alert HAL of our
network devices, and bring up the loopback device explicitly
* src/NetworkManagerUtils.[ch]
- (nm_enable_loopback): new function
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@55 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Remove various Makefile.in files
* TODO
- Add some more items
* configure.in
- Add checks for OpenSSL/md5 headers and libs
* src/Makefile.am
- Use OpenSSL CFLAGS
* src/NetworkManagerAP.[ch]
- Remove 'stamp' functions, replace with 'invalid' functions
to support user cancelling WEP key entry
* src/NetworkManagerDbus.c
- Remove 'stamp' return functions
- Treat returned user key as a passphrase and convert to a WEP key,
but don't actually use the WEP key yet. We use the returned user
key as a hexadecimal WEP key until we can figure out a UI for
passphrase-vs-hex key
* src/NetworkManagerWireless.[ch]
- Add passphrase-to-128bit-key function
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@28 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAPList.[ch]
src/Makefile.am
- Add. Deal with allowed network list additions, deletions, and updates
* dispatcher-daemon/NetworkManagerDispatcher.c
- Add missing <dbus/dbus.h> header
* info-daemon/NetworkManagerInfo.[ch]
- Add missing <dbus/dbus.h> header
- Implement the GConf notify callback to signal NetworkManager of an allowed
network change
- Better error checking
* info-daemon/NetworkManagerInfoDbus.[ch]
- Add missing <dbus/dbus.h> header
- Convert to using dbus_message_append_args/dbus_message_get_args
- Implement nmi_dbus_signal_update_allowed_network() to signal NetworkManager
that an allowed network changed. We don't want to signal on individual
keys _inside_ an allowed network really, just want NM to query the info
daemon for updated info on all keys.
- Better error checking
* src/NetworkManager.[ch]
- Add missing <dbus/dbus.h> header
- Move allowed_ap_list free functions to NetworkManagerAPList.[ch]
- Zero out NMData structure on free
- No longer use a thread for allowed_ap_list updating, instead its now done
through dbus queries against NetworkManagerInfo
- Populate allowed_ap_list initially before adding existing network devices
to the device list, so wireless devices can get their "best" AP
* src/NetworkManagerDbus.[ch]
- Convert to using dbus_message_append_args/dbus_message_get_args
- Better error checking
- Implement Allowed Network info functions to request allowed network
info from NetworkManagerInfo
- Implement the filter function to process signals from NetworkManagerInfo
about changing allowed networks
* src/NetworkManagerDevice.c
- Fix file descriptor leak in nm_device_update_ip4_address()
`CVS: Modified Files:
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@22 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
- Add checks for GConf libs & headers & flags
* info-daemon/Makefile.am
- Add GConf flags & libs to compile/link stages of NetworkManagerInfo
* info-daemon/NetworkManagerInfo.[ch]
- Don't use gquarks for data storage, just use normal data storage
- Add gconf bits to watch /system/networking/wireless/allowed_networks
* info-daemon/NetworkManagerDbus.[ch]
- Add method call for getting allowed networks
- Add method calls for getting an allowed network's essid, priority, and key
- Hook the method calls up to GConf
- Split user key dialog code into separate function (nmi_dbus_get_key_for_network)
- nmi_dbus_nmi_message_handler(): make sure to unref the reply message after sending
* src/NetworkManagerDbus.[ch]
- Switch for enumeration of networks to using essid instead
* test/Makefile.am
test/nminfotest.c
- Add test program for NetworkManagerInfo
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@19 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/Makefile.am
- Turn on warnings
* src/NetworkManager.c
- nm_create_device_and_add_to_list(): call nm_device_deactivate() rather
that doing the deactivation ourselves
- Cancel an pending actions on a device if its being removed
- Break up link state checking a bit, make non-active wireless cards
deactivated to save power
- Remove unused variables
* src/NetworkManager.h
- Add support for "pending" device
* src/NetworkManagerAP.h
src/NetworkManagerAP.c
- Add support for determining whether and AP has encryption enabled or not
- AP address is now "struct ether_addr" rather than a string
* src/NetworkManagerDbus.h
src/NetworkManagerDbus.c
- Add signal NeedKeyForNetwork, method SetKeyForNetwork (testing only)
- Changes for AP address from struct ether_addr->string
* src/NetworkManagerDevice.h
src/NetworkManagerDevice.c
- Remove unused variables, fix warnings
- Add support for Pending Actions (things that block a device from being "active"
until they are completed).
- First pending action: Get a WEP key from the user
- Add nm_device_is_wire[d|less](), rename nm_device_is_wireless()
- Clean up explicit testing of dev->iface_type to use nm_device_is_wireless()
- Update wireless link checking to try to determine if the AP we are associated
with is correct, but the WEP key we are using is just wrong. If its wrong,
trigger the GetUserKey pending action on the device
- If dhclient can't get an IP address, it brings the device down. Bring it back
up in that case, otherwise we can't scan or link-check on it
- Add IP address change notifications at appropriate points (still needs some work)
- Add nm_device_need_ap_switch(), checks whether we need to switch access points or not
* src/NetworkManagerPolicy.h
src/NetworkManagerPolicy.c
- Split out "best" access point determiniation into separate function
- Make device activation 2-stage: first the device is pending, then
in the next iteration through it becomes "active" unless it has
pending actions
* src/NetworkManagerUtils.h
src/NetworkManagerUtils.c
- Clean up unused variables and warnings
- Wrap our debug macros in {} to prevent possible confusion
* src/NetworkManagerWireless.c
- Forgot to return current best priority, which lead to last available AP always
being chosen no matter what its priority was. Corrected.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@15 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
