It's deprecated. Warn any time it is being considered for loading,
instead of at load time, so that the user gets a warning when they got
the plugin in configuration, even if it's build time disabled.
https://issues.redhat.com/browse/RHEL-24622
Prioritize internal, which is what most people should be using. Try
dhclient last, so that it's not attempted when not explicitly
configured or everything else fails.
Before introducing the hostname lookup via nm-daemon-helper and
systemd-resolved, we used GLib's GResolver which internally relies on
the libc resolver and generally also returns results from /etc/hosts.
With the new mechanism we only ask to systemd-resolved (with
NO_SYNTHESIZE) or perform the lookup via the "dns" NSS module. In both
ways, /etc/hosts is not evaluated.
Since users relied on having the hostname resolved via /etc/hosts,
restore that behavior. Now, after trying the resolution via
systemd-resolved and the "dns" NSS module, we also try via the "files"
NSS module which reads /etc/hosts.
Fixes: 27eae4043b ('device: add a nm_device_resolve_address()')
When ModemManager become available, NetworkManager resets
GDBusObjectManagerClient object.
But there is a race condition if object-added is emitted before
modm_ensure_manager(), we need to check existing objects if we want to be
in sync with ModemManager.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1957
Also check for gateway equality when deduplicate routing entries. This
allows to support multiple routes to the same network using different
gateways. This is useful for Thread networks where multiple BRs route
to the same Thread network. If one of these BRs go offline, fallback to
a different router will be much quicker if multiple entries are present.
Note that quick fallback to a different router requires IPv6
reachability probe to be active. Typically Linux disables reachability
probes on Linux machines which act as IPv6 gateway (when forwarding is
enabled).
When the lease expires, the DHCP client emits a LEASE_UPDATE event
with a NULL l3cd. After returning from the handler, it sends
immediately a DHCP DISCOVER message to try to get a new lease.
It is important that when the DISCOVER gets sent the address is no
longer configured on the interface. Otherwise, the server could see
that it is already in use and assign a different one. Therefore,
remove the address synchronously when handling the event.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1532
Currently, when the agent manager is sent a registration request
containing UTF-8 characters, it will form an invalid error message
using only one of the bytes from the UTF-8 sequence, which causes
an assertion in glib to fail, which replaces the returned error message
with "[Invalid UTF-8]". It will also print an assertion failure to the
console, or crash NetworkManager on non-release builds.
This commit makes it so that it instead prints out the character in
hexadecimal form if it isn't normally printable, so that it is once
again a valid UTF-8 string.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1965
Fixes: a30cf19858 ('agent: add agent manager and minimal agent class')
Adds an option in the connectivity section to change the timeout before
the interface is deemed "limited". Previously, it was hardcoded to
20 seconds, but for our usecase (failing over to cell modem if
hardwired ethernet drops), it's nice to be able to failover to another
interface more quickly.
The OVS interface can be matched via MAC address; in that case, the
"connection.interface-name" property of the connection is empty.
When populating the ovsdb, we need to pass the actual interface name
from the device, not the one from the connection.
Fixes: 830a5a14cb ('device: add support for OpenVSwitch devices')
https://issues.redhat.com/browse/RHEL-34617
The group interface is only used during activation; there is no need
to add a pending action for it, because when the device is in
activating state it already delays "startup-complete" via other
pending actions.
Usually, when the method is "auto" we want to avoid configuring routes
until the automatic method completes. To achieve that, we clear the
"allow_routes_without_address" flag of l3cds when the method is "auto".
For VPNs, IP configurations with only routes are perfectly valid,
therefore set the flag.
The name "dhcp_enabled" is misleading because the flag is set for
method=auto, which doesn't necessarily imply DHCP. Also, it doesn't
convey what the flag is used for. Rename it to
"allow_routes_without_address".
An IPv4-over-IPv6 (or vice-versa) IPsec VPN can return IP
configurations with routes and without addresses. For example, in this
scenario:
+---------------+ +---------------+
| fd01::10/64 <-- VPN --> fd02::20/64 |
| host1 | | host2 |
+-------^-------+ +-------^-------+
| |
+-------v-------+ +-------v-------+
| subnet1 | | subnet2 |
| 172.16.1.0/24 | | 172.16.2.0/24 |
+---------------+ +---------------+
host1 and host2 establish a IPv6 tunnel which encapsulates packets
between the two IPv4 subnets. Therefore, in routed mode, host1 will
need to configure a route like "172.16.2.0/24 via ipsec1" even if the
host doesn't have any IPv4 address on the VPN interface.
Accept IP configurations without address from the VPN; only check that
the address and prefix are sane if they are provided.
Connection timestamps are updated (saved to disk) on connection up and
down. This way, the last used connection will take precedence for
autoconnect if they have the same priority.
But as we don't actually do connection down when NM stops, the last
connection timestamp of all active connections is the timestamp of when
they were brought up. Then, the activation order might be wrong on next
start.
One case where timestamps are wrong (although it is not clear how
important it is because the connections are activated on different
interfaces):
1. Activate con1 <- timestamp updated
2. Activate con2 <- timestamp updated
3. Deactivate con2 <- timestamp updated
4. Stop NM <- timestamp of con2 is higher than con1, but con1 was still
active when con2 was brought down.
Other case that is reproducible (from
https://issues.redhat.com/browse/RHEL-35539):
1. Activate con1
2. Activate con2 on same interface:
- As a consequence con1 is deactivated and its timestamp updated
- The timestamp of con2 is also updated
3. Stop NM <- timestamp of con1 and con2 is the same, next activation
order will be undefined.
Fix by saving the timestamps on NM shutdown.
Problem:
Given a OVS port with `autoconnect-ports` set to default or false,
when reactivation required for checkpoint rollback,
previous activated OVS interface will be in deactivate state after
checkpoint rollback.
The root cause:
The `activate_stage1_device_prepare()` will mark the device as
failed when controller is deactivating or deactivated.
In `activate_stage1_device_prepare()`, the controller device is
retrieved from NMActiveConnection, it will be NULL when NMActiveConnection
is in deactivated state. This will cause device been set to
`NM_DEVICE_STATE_REASON_DEPENDENCY_FAILED` which prevent all follow
up `autoconnect` actions.
Fix:
When noticing controller is deactivating or deactivated with reason
`NM_DEVICE_STATE_REASON_NEW_ACTIVATION`, use new function
`nm_active_connection_set_controller_dev()` to wait on controller
device state between NM_DEVICE_STATE_PREPARE and
NM_DEVICE_STATE_ACTIVATED. After that, use existing
`nm_active_connection_set_controller()` to use new
NMActiveConnection of controller to move on.
Resolves: https://issues.redhat.com/browse/RHEL-31972
Signed-off-by: Gris Ge <fge@redhat.com>
Commit 797f3cafee ('device: fall back to saved use_tempaddr value
instead of rereading /proc') changed the behaviour of how to get the
last resort default value for ip6-privacy property.
Previously we read it from /proc/sys/net/ipv6/conf/default, buf after
this commit we started to read /proc/sys/net/ipv6/conf/<iface> instead,
because the user might have set a different value specific for that device.
As NetworkManager changes that value on connection activation, we used
the value read at the time that NetworkManager was started.
Commit 6cb14ae6a6 ('device: introduce ipv6.temp-valid-lifetime and
ipv6.temp-preferred-lifetime properties') introduced 2 new IPv6 privacy
related properties relying on the same mechanism.
However, this new behaviour is problematic because it's not predictable
nor reliable:
- NetworkManager is normally started at boot time. That means that, if a
user wants to set a new value to /proc/sys/net/ipv6/conf/<iface>,
NetworkManager is likely alread running, so the change won't take
effect.
- If NetworkManager is restarted it will read the value again, but this
value can be the one set by NetworkManager itself in the last
activation. This means that different values can be used as default in
the same system boot depending on the restarts of NetworkManager.
Moreover, this weird situation might happen:
- Connection A with ip6-privacy=2 is activated
- NetworkManager is stopped. The value in
/proc/sys/net/ipv6/conf/<iface>/use_tempaddr remains as 2.
- NetworkManager starts. It reads from /proc/sys/... and saves the value
'2' as the default.
- Connection B with no ip6-privacy setting is activated. The '2' saved
as default value is used. The connection didn't specify any value for
it, and the value '2' was set by another connection for that specific
connection only, not manually by a user that wanted '2' to be the
default.
A user shouldn't have to think on when NetworkManager starts or restarts
to known in an easy and predictable way what the default value for
certain property is. It's totally counterintuitive.
Revert back to the old behaviour of reading from
/proc/sys/net/ipv6/conf/default. Although this value is used by the
kernel only for newly created interfaces, and not for already existing
ones, it is reasonable to think on these settings as "systemwide
defaults" that the user has chosen.
Note that setting a different default in NetworkManager.conf still takes
precedence.
If a connection is in-memory (i.e. has flag "unsaved"), after a
checkpoint and rollback it can be wrongly persisted to disk:
- if the connection was modified and written to disk after the
rollback, during the rollback we update it again with persist mode
"keep", which keeps it on disk;
- if the connection was deleted after the rollback, during the
rollback we add it again with persist mode "to-disk".
Instead, remember whether the connection had the "unsaved" flag set
and try to restore the previous state.
However, this is not straightforward as there are 4 different possible
states for the settings connection: persistent; in-memory only;
in-memory shadowing a persistent file; in-memory shadowing a detached
persistent file (i.e. the deletion of the connection doesn't delete
the persistent file). Handle all those cases.
Fixes: 3e09aed2a0 ('checkpoint: add create, rollback and destroy D-Bus API')
This allows SLAAC for IPv6 to be performed, even when no IPv6
address was passed by the bearer. The link-local address will be
assigned, because of do_auto = TRUE.
The commit also allows the DNS assignment to be made statically when
no IPv6 address has been statically assigned yet. This is to be able
to receive IPv6 DNS servers via signalling, where host SLAAC still
needs to be performed for some modems (e.g. some huawei modems).
This also changes the logging so that SLAAC usage is logged
on a separate line.
NMPowerMonitor emits the "shutdown" signal without arguments; fix the
definition of the signal.
Fixes: bd38a19832 ('connection: add support to down-on-poweroff')
Fix the following:
NetworkManager: file ../src/libnm-core-impl/nm-connection.c: line 321 (nm_connection_get_setting): should not be reached
NetworkManager.service: Main process exited, code=dumped, status=5/TRAP
Fixes: bd38a19832 ('connection: add support to down-on-poweroff')
Meson has shared_library and shared_module. The latter should be used
only for shared plugins loaded by dlopen, not for shared libraries
linked by the linker.
The target `nm_wwan` was defined as shared_module probably because it
is a library for loadable plugins only, andcontains references to
symbols from the main executable that cannot be resolved at link time.
Do as the deprecation message suggest and convert it to shared_library
with b_lundef=false:
DEPRECATION: target nm-device-plugin-wwan links against shared module nm-wwan, which is incorrect.
This will be an error in the future, so please use shared_library() for nm-wwan instead.
If shared_module() was used for nm-wwan because it has references to undefined symbols,
use shared_library() with `override_options: ['b_lundef=false']` instead.
The value can be unknown for different reasons:
- we don't have a value saved in NMDevice's "ip6_saved_properties"
because NM was restarted or because the device didn't have an
ifindex when it became managed.
- the value read from /proc is outside the allowed range (kernel
allows "echo 42 > /proc/sys/net/ipv6/conf/enp1s0/use_tempaddr")
Note that the second case was already possible before commit
797f3cafee ('device: fall back to saved use_tempaddr value instead
of rereading /proc').
If we can't determine the previous value, pass "unknown" to ndisc; it
will generate a l3cd with "unknown" ip6-privacy, which means to not
set the value when committing the configuration.
Fixes: 797f3cafee ('device: fall back to saved use_tempaddr value instead of rereading /proc')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1907
While enumerating devices at startup, we take a snapshot of existing
links from platform and we start creating device instances for
them. It's possible that in the meantime, while processing netlink
events in platform_link_added(), a link gets renamed. If that happens,
then we have two different views of the same ifindex: the cached link
from `links` and the link in platform.
This can cause issues: in platform_link_added() we create the device
with the cached name; then in NMDevice's constructor(), we look up
from platform the ifindex for the given name. Because of the rename,
this lookup can match a newly created, different link.
The end result is that the ifindex from the initial snapshot doesn't
get a NMDevice and is not handled by NetworkManager.
Fix this problem by fetching the latest version of the link from
platform to make sure we have a consistent view of the state.
https://issues.redhat.com/browse/RHEL-25808https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1897
When IPv6 privacy extensions are enabled, by default temporary addresses
have a valid lifetime of 1 week and a preferred lifetime of 1 day.
That's far too long for privacy-conscious users, some of whom want a new
address once every few seconds. Add connection options that correspond
to /proc/sys/net/ipv6/conf/*/temp_valid_lft and
/proc/sys/net/ipv6/conf/*/temp_prefered_lft to allow configuring the
address rotation time on a per-connection basis.
The new properties are defined as 32-bit signed integers to match the
sysctl parameters which are also signed, although currently only
positive numbers are valid.
A common source for doubts and questions from users is about why
devices are unmanaged. Unfortunately NM doesn't expose that
information properly via D-Bus and so it's not available in nmcli.
The device D-Bus object has two properties that are strictly related:
"state" and "state-reason". The latter represents the reason for the
current state. Introduce new reasons to indicate the possible causes
for the unmanaged state. Note that a device can be unmanaged because
of multiple reasons at the same time, we only return one.
Before:
$ nmcli -f GENERAL.DEVICE,GENERAL.TYPE,GENERAL.STATE,GENERAL.reason device show
GENERAL.DEVICE: enp7s0
GENERAL.TYPE: ethernet
GENERAL.STATE: 10 (unmanaged)
GENERAL.REASON: 0 (No reason given)
GENERAL.DEVICE: tun0
GENERAL.TYPE: tun
GENERAL.STATE: 10 (unmanaged)
GENERAL.REASON: 0 (No reason given)
GENERAL.DEVICE: hwsim0
GENERAL.TYPE: unknown
GENERAL.STATE: 10 (unmanaged)
GENERAL.REASON: 0 (No reason given)
After:
$ nmcli -f GENERAL.DEVICE,GENERAL.TYPE,GENERAL.STATE,GENERAL.reason device show
GENERAL.DEVICE: enp7s0
GENERAL.TYPE: ethernet
GENERAL.STATE: 10 (unmanaged)
GENERAL.REASON: 76 (The device is unmanaged by user decision via settings plugin ("unmanaged-devices" for keyfile or "NM_CONTROLLED=no" for ifcfg-rh))
GENERAL.DEVICE: tun0
GENERAL.TYPE: tun
GENERAL.STATE: 10 (unmanaged)
GENERAL.REASON: 75 (The device is unmanaged by explicit user decision (e.g. 'nmcli device set $DEV managed no')
GENERAL.DEVICE: hwsim0
GENERAL.TYPE: unknown
GENERAL.STATE: 10 (unmanaged)
GENERAL.REASON: 69 (The device is unmanaged because the device type is unmanaged by default)
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1887
Setting for wpa_supplicant openssl_ciphers - openssl sometimes moves
ciphers among SECLEVELs. That is generaly a good thing, but some servers
are too old to support newer ciphers. Thus expert user should be allowed
to define openssl_ciphers per connection, so that they can connect to
old server, while not compromising security of other connections.
When creating VLAN over OVS internal interface which holding the same
name as its controller OVS bridge, NetworkManager will fail with error:
Error: Connection activation failed: br0.101 failed to create
resources: cannot retrieve ifindex of interface br0 (Open vSwitch
Bridge)
Expanded the `find_device_by_iface()` with additional argument
`child: NmConnection *` which will validate whether candidate is
suitable to be parent device.
In `nm_device_check_parent_connection_compatible()`, we only not allow OVS
bridge and OVS port being parent.
Resolves: https://issues.redhat.com/browse/RHEL-26753
Signed-off-by: Gris Ge <fge@redhat.com>
With `NM_CHECKPOINT_CREATE_FLAG_TRACK_INTERNAL_GLOBAL_DNS` flag set on
checkpoint creation, the checkpoint rollback will restore the
global DNS in internal configure file
`/var/lib/NetworkManager/NetworkManager-intern.conf`.
If user has set global DNS in /etc folder, this flag will not take any
effect.
Resolves: https://issues.redhat.com/browse/RHEL-23446
Signed-off-by: Gris Ge <fge@redhat.com>
