NMRemoteConnection used to return
NM_REMOTE_CONNECTION_ERROR_DISCONNECTED if you tried to operate on a
connection that had been disconnected from its D-Bus proxy. But this
disappeared in the gdbus port (since gdbus doesn't emit a signal when
it happens, so it's harder to notice. And it's not clear why
NMRemoteConnection did this when no other class did anyway...).
Add nm-errors.[ch], and move libnm-core's two error domains
(NMConnectionError and NMCryptoError) there.
NMCryptoError wasn't previously visible, but it can be returned from
some public API, so it should be.
Each setting type was defining its own error type, but most of them
had exactly the same three errors ("unknown", "missing property", and
"invalid property"), and none of the other values was of much use
programmatically anyway.
So, this commit merges NMSettingError, NMSettingAdslError, etc, all
into NMConnectionError. (The reason for merging into NMConnectionError
rather than NMSettingError is that we also already have
"NMSettingsError", for errors related to the settings service, so
"NMConnectionError" is a less-confusable name for settings/connection
errors than "NMSettingError".)
Also, make sure that all of the affected error messages are localized,
and (where appropriate) prefix them with the relevant property name.
Renamed error codes:
NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND
NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET
Remapped error codes:
NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING
NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY
Dropped error codes (were previously defined but unused):
NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED
NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED
NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING
NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING
NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
nm_setting_lookup_type_by_quark() was only ever used in places that
were still mistakenly assuming the old style of nm_connection_verify()
errors, where the error message would contain only a property name and
no further explanation. Fix those places to assume that the error will
contain a real error message, and include both the setting name and
the property name.
Given that, there's no longer any need for
nm_setting_lookup_type_by_quark(), so drop it.
The functions nm_setting_clear_secrets(),
nm_setting_clear_secrets_with_flags(), and nm_setting_need_secrets()
are not used outside of libnm-core. Remove them from public API.
Signed-off-by: Thomas Haller <thaller@redhat.com>
The autoconnect priority has only any relevance, if the connection
is autoconnect too.
The priority defaults to zero, with higher numbers meaning preferred.
The valid range is limited to [-999,999].
Signed-off-by: Thomas Haller <thaller@redhat.com>
NMActiveConnection:connection was an object path rather than an
NMRemoteConnection because in the past the NMObject property system
wasn't capable of handling NMRemoteConnection-valued properties.
NMActiveConnection:master was an object path rather than an NMDevice
entirely by accident. Fix both.
NMActiveConnection:specific-object can't currently be converted to an
object, because we don't know ahead of time what object type it is,
and NMObject can't deal with that. Instead, we rename it to
:specific-object-path (and likewise for its get function), both to
emphasize that it doesn't behave like other properties, and to leave
the old name open for an actual object-valued property later on.
NMSettingSerial:parity was defined as a char-typed property that could
have the (case-sensitive!) values 'n', 'E', or 'o'. This is zany. Add
an NMSettingSerialParity enum, and use that instead.
Add nm_utils_wifi_strength_bars(), which figures out whether the
terminal can display graphical wifi strength bars, and converts a
numerical value to the appropriate Unicode or ASCII characters.
This also now takes into consideration the fact that the console font
doesn't contain all of the necessary characters, so we can't display
the graphical bars there. (rh #1131491)
Add the missing variant in most places in the API where previously
there was either only a synchronous version or only an asynchronous
version.
There is not yet a synchronous nm_client_activate_connection(),
nm_client_add_and_activate_connection(), or
nm_remote_settings_add_connection(), because the existing async code
depends on waiting for other asynchronous events, so making them run
synchronously is slightly more complicated. But these APIs can be
added later.
Make synchronous APIs take GCancellables, and make asynchronous APIs
use GAsyncReadyCallbacks and have names ending in "_async", with
"_finish" functions to retrieve the results.
Also, make nm_client_activate_connection_finish(),
nm_client_add_and_activate_finish(), and
nm_remote_settings_add_connection_finish() be (transfer full) rather
than (transfer none), because the refcounting semantics become
slightly confusing in some edge cases otherwise.
Merge nm_remote_settings_add_connection() and
nm_remote_settings_add_connection_unsaved(), and likewise
nm_remote_connection_commit_changes() and
nm_remote_connection_commit_changes_unsaved(), by adding a boolean
flag to each saying whether to save to disk.
Port libnm-core/libnm to GDBus.
The NetworkManager daemon continues to use dbus-glib; the
previously-added connection hash/variant conversion methods are now
moved to NetworkManagerUtils (along with a few other utilities that
are now only needed by the daemon code).
There's not much point in keeping them separate: all existing
libnm-glib-vpn users also link against libnm-glib, and the amount of
extra code added to libnm by merging in libnm-vpn is negligible.
Additionally, nm-vpn-plugin will later need access to some
libnm-internal APIs.
So, merge them together.
Make register() and unregister() have cancellable sync and async
variants. And make NMSecretAgent implement GInitable/GAsyncInitable,
and do the initial auto-registration as part of initialization rather
than doing it asynchronously and emitting a signal.
The only plausible use case for the NMObject:dbus-connection property
is for using the session bus in test programs. So just drop it and use
an environment variable to decide which bus to use instead.
The docs for NMIP4Config:addresses and NMIP4Config:routes claimed that
they were GPtrArrays of NMIP4Address/NMIP4Route, but get_property()
was actually trying to set them the D-Bus representation type, and it
was failing anyway because it used g_value_set_boxed() on a parameter
that was declared GParamSpecPointer. Fix it to use a GPtrArray-valued
property, and set it to the right thing.
NMIP6Config did the right thing with its :addresses and :routes
properties, but was using custom types (NM_TYPE_IP6_ADDRESS_OBJECT_ARRAY and
NM_TYPE_IP6_ROUTE_OBJECT_ARRAY). Make it use G_TYPE_PTR_ARRAY instead.
nm-types.c, nm-types.h, and nm-types-private.h are now empty, and so
can be dropped.
Make NMIP4Config:nameservers, NMIP4Config:wins-servers, and
NMIP6Config:nameservers be G_TYPE_STRV, with stringified IP addresses,
and update the APIs accordingly.
Use G_TYPE_PTR_ARRAY for GPtrArray-of-NMObject-valued properties,
because it has better introspection/bindings support.
As with the strdict change in libnm-core, we need to manually copy the
array in get_property() implementations, to preserve the standard
semantics that get_property() returns a copy, not the internal array.
(This patch also changes those properties so that they are always
non-NULL until dispose(); previously some of them could be either NULL
or 0-length at different times.)
Remove the virtual :interface-name properties and their getters, and
use property overrides to do backward-compat handling when
serializing/deserializing.
Now when constructing an NMConnection from a hash, if the virtual
property is set and the NMSettingConnection property isn't, then the
override for NMSettingConnection:interface-name will set that property
to the value of the virtual interface-name. And when converting an
NMConnection to a hash, the overrides for the virtual properties will
return the value of NMSettingConnection:interface-name.
Add a method to determine if a connection applies to a virtual device.
Perhaps eventually the logic should be spread across the NMSetting
classes, but for now it's better off having it in NMConnection than
once in NMManager and once in nmcli.
Since we enforce the fact that bond, bridge, team, and vlan
interface-name properties match NMSettingConnection:interface-name,
nm_connection_get_virtual_iface_name() can be replaced with
nm_connection_get_interface_name() basically everywhere.
The one place this doesn't work is with InfiniBand partitions (where
get_virtual_iface_name() was actually computing the name), but for the
most part we only need to care about the interface names of InfiniBand
partitions in places where we also already need to do some other
InfiniBand-specific handling as well, so we can use an
InfiniBand-specific method
(nm_setting_infiniband_get_virtual_interface_name()) to get it.
(Also, while updating nm_device_get_virtual_device_description(), fix
it to handle InfiniBand partitions too.)
On failure, nm_connection_replace_settings() would leave the
connection in an undefined state. Fix it so that either (a) the
settings are replaced and the resulting connection is valid and we
return TRUE, or (b) the connection is untouched and we return FALSE
and an error. (And add a test case for this.)
Rename nm_connection_to_hash() to nm_connection_to_dbus(), and
nm_connection_new_from_hash() to nm_connection_new_from_dbus(). In
addition to clarifying that this is specifically the D-Bus
serialization format, these names will also work better in the
GDBus-based future where the serialization format is GVariant, not
GHashTable.
Also, move NMSettingHashFlags to nm-connection.h, and rename it
NMConnectionSerializationFlags.
Make nm_setting_to_hash() and nm_setting_new_from_hash() private, and
remove the public nm_setting_update_secrets() wrapper around the
existing private _nm_setting_update_secrets().
These functions should really only be called from the corresponding
NMConnection-level methods, and in particular, with certain
compatibility properties in the future, we will need to consider the
entire connection all at once when setting properties, so it won't
make sense to serialize/deserialize a single setting in isolation.
Add a header file to expose private utility functions from libnm-core
that can be used by NetworkManager (core) and libnm.so. The header
is also used to give privileged access to libnm-core. Since NM links
statically, these functions are not exported and not part of public ABI.
This also removes the NM_UTILS_PRIVATE_CALL() macro and libnm.so no
longer exports nm_utils_get_private().
Before, this functionality was partly declared in nm-utils-private.h.
This was wrong because nm-utils-private.h is for functionality
entirely private to libnm-core.
Signed-off-by: Thomas Haller <thaller@redhat.com>
The fact that NMRemoteConnection has to be an NMConnection and
therefore can't be an NMObject means that it needs to reimplement bits
of NMObject functionality (and likewise NMObject needs some special
magic to deal with it). Likewise, we will need a daemon-side
equivalent of NMObject as part of the gdbus port, and we would want
NMSettingsConnection to be able to inherit from this as well.
Solve this problem by making NMConnection into an interface, and
having NMRemoteConnection and NMSettingsConnection implement it. (We
use some hacks to keep the GHashTable of NMSettings objects inside
nm-connection.c rather than having to be implemented by the
implementations.)
Since NMConnection is no longer an instantiable type, this adds
NMSimpleConnection to replace the various non-D-Bus-based uses of
NMConnection throughout the code. nm_connection_new() becomes
nm_simple_connection_new(), nm_connection_new_from_hash() becomes
nm_simple_connection_new_from_hash(), and nm_connection_duplicate()
becomes nm_simple_connection_new_clone().
NMRemoteConnection had two DBusGConnection properties
(NMRemoteConnection:bus and NMRemoteConnection:dbus-connection) and
two D-Bus path properties (NMConnection:path and
NMRemoteConnection:dbus-path). The former of each pair were the
traditional names, and the latter were added for compatibility with
NMObject.
In libnm, we can just drop NMRemoteConnection:bus, and use the
NMObject-compatible :dbus-connection name instead.
For the path properties, we need to rename either NMConnection:path or
NMObject:dbus-path. Since NMObject already has "nm_object_get_path()"
rather than "nm_object_get_dbus_path()", and it already mistakenly
referred to the property as "NMObject:path" in the gtk-docs, it seemed
to make sense to rename that one rather than the NMConnection one.
(And then, for consistency, rename "nm_object_get_connection()" to
"nm_object_get_dbus_connection()" to also match its property.)
nm_connection_lookup_setting_type() and
nm_connection_lookup_setting_type_by_quark() have nothing to do with
NMConnection. So move them to NMSetting (and rename them to
nm_setting_lookup_type() and nm_setting_lookup_type_by_quark()).
Add nm_utils_hwaddr_matches(), for comparing hardware addresses for
equality, allowing either binary or ASCII hardware addresses to be
passed, and handling the special rules for InfiniBand hardware
addresses automatically. Update code to use it.
Drop the arptype-based nm_utils_hwaddr funcs, and rename the
length-based ones to no longer have _len in their names. This also
switches nm_utils_hwaddr_atoba() to using a length rather than an
arptype, and adds a length argument to nm_utils_hwaddr_valid() (making
nm_utils_hwaddr_valid() now a replacement for nm_utils_hwaddr_aton()
in some places, where we were only using aton() to do validity
checking).
Remove deprecated functions and enum types.
For now, deprecated properties are still around, because removing them
would cause warnings when talking to older implementations.
This fixes up the code from the previous "clean" import, and adds
build infrastructure.
[There are two slightly orthogonal sets of changes in this patch.
First, the files added in the previous commit were modified as followed:
# Replace internal references to "libnm-util" and "libnm-glib" with "libnm"
perl -pi -e 's/libnm-(util|glib)/libnm/;' libnm-core/*.[ch] libnm-core/tests/*.[ch] libnm/*.[ch] libnm/tests/*.[ch]
# Fix includes of the enum-types files
perl -pi -e 's/nm-utils-enum-types/nm-core-enum-types/;' libnm-core/*.[ch] libnm-core/tests/*.[ch] libnm/*.[ch] libnm/tests/*.[ch]
perl -pi -e 's/nm-glib-enum-types/nm-enum-types/;' libnm/*.[ch] libnm/tests/*.[ch]
# Fix some python example code
perl -pi -e 's/import NMClient/import NM/;' -e 's/NMClient.Client\(\)/NM.Client()/;' libnm/nm-client.c
Then, the build infrastructure was added (without further modifying
any existing files in libnm-core or libnm.)
Note: to regenerate libnm.ver after rebase:
(head -2 libnm-util/libnm-util.ver; (grep -h '\s'nm_ libnm-util/libnm-util.ver libnm-glib/libnm-glib.ver | env LANG=C sort); tail -3 libnm-util/libnm-util.ver) > libnm/libnm.ver
]
