We should enable tests by default, probably we even should drop
the configure flags to enable tests and just always build them.
Anyway, at this point there is no use in guarding check-local
with a check for ENABLE_TESTS. A user who does't want to run
the tests, should just not call `make check`.
An interface would make sense to allow the actual device-factory to inherit
from another type.
However, glib interfaces make code much harder to follow and less
efficient. The device factory shall be a very simple type with meta data
about supported device types and the ability to create device instances.
There is no need to make this an interface implementation, instead just
let the factories inherit from NM_TYPE_DEVICE_FACTORY directly.
First of all, G_LOG_DOMAIN only matters when using g_log() directly.
Inside core, we always want to log via nm-logging. Every call to a
g_log() is a bug in the first place (like a failed assertion that logs
a g_critical() during g_return_if_fail()).
So, for all practic purposes, the logging domain is not used.
For nm-logging, the G_LOG_DOMAIN has no effect. Unless we find a proper
use of this domain, G_LOG_DOMAIN should not differ from what the rest of
core.
- use _NM_GET_PRIVATE() and _NM_GET_PRIVATE_PTR() everywhere.
- reorder statements, to have GObject related functions (init, dispose,
constructed) at the bottom of each file and in a consistent order w.r.t.
each other.
- unify whitespaces in signal and properties declarations.
- use NM_GOBJECT_PROPERTIES_DEFINE() and _notify()
- drop unused signal slots in class structures
- drop unused header files for device factories
NMPolicy:auto_activate_device() would wrongly not free the
specific_object, although it is documented as transfer-full.
The only implementation of can_auto_connect() that returned
a specific-object is NMDeviceWifi:can_auto_connect(). So, there
wasn't any actual bug or memory leak.
Fixes: 4c028c7cef
- don't include "nm-default.h" in header files. Every source file must
include as first header "nm-default.h", thus our headers get the
default include already implicitly.
- we don't support compiling NetworkManager itself with a C++ compiler. Remove
G_BEGIN_DECLS/G_END_DECLS from internal headers. We do however support
users of libnm to use C++, thus they stay in public headers.
(cherry picked from commit f19aff8909)
Using the current, possibly non-permanent MAC address doesn't really
make sense.
Also, NM_DEVICE_HW_ADDRESS used to be writable and was set by NMDeviceBt
to the bdaddr. That is wrong, because bdaddr should not be the current
address, but the permanent one.
Introduce the nm_device_ip_method_failed() function to check if the
failure of an IP method should cause the activation to fail, and use
it where appropriate.
http://bugzilla.gnome.org/show_bug.cgi?id=741347
Currently, NM_CP_SIGNAL_CONNECTION_UPDATED signal will be invoked on an
idle handler. I want to change that, so to be save, delay actions that
matter on an idle handler.
For internal compilation we want to be able to use deprecated
API without warnings.
Define the version min/max macros to effectively disable deprecation
warnings.
However, don't do it via CFLAGS option in the makefiles, instead hack it
to "nm-default.h". After all, *every* source file that is for internal
compilation needs to include this header as first.
GError codes are only unique per domain, so logging the code without
also indicating the domain is not helpful. And anyway, if the error
messages are not distinctive enough to tell the whole story then we
should fix the error messages.
Based-on-patch-by: Dan Winship <danw@gnome.org>
Functions that take a GError** MUST fill it in on error. There is no
need to check whether error is NULL if the function it was passed to
had a failing return value.
Likewise, a proper GError must have a non-NULL message, so there's no
need to double-check that either.
Based-on-patch-by: Dan Winship <danw@gnome.org>
- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
Up to now, the "include" directory contained (only) header files that were
used project-wide by libs, core, clients, et al.
Since the directory now also contains a non-header file, the "include"
name is misleading. Instead of adding yet another directory that is
project-wide, with non-header-only content, rename the "include"
directory to "shared".
Because Bluez5 dropped DUN support, NM must do that manually which
includes emulating the "connected" property for Bluetooth devices when
DUN is used. It does this by setting priv->connected = TRUE in
nm_bluez_device_connect_finish().
But for PAN, when NM does process the 'connected' property change
notification, priv->connected is already TRUE and
_take_variant_property_connected() does nothing. Hence the
corresponding GObject property notification is not emitted,
nm-device-bt.c::check_connect_continue() will never return success, and
the activation times out.
To fix this, ensure that GObject notifications are emitted when the
device is connected, even if emulated internally.
https://mail.gnome.org/archives/networkmanager-list/2015-October/msg00053.htmlhttps://bugzilla.redhat.com/show_bug.cgi?id=1255284
For libnm library, "nm-dbus-interface.h" contains defines like the D-Bus
paths of NetworkManager. It is desirable to have this header usable without
having a dependency on "glib.h", for example for a QT application. For that,
commit c0852964a8 removed that dependancy.
For libnm-glib library, the analog to "nm-dbus-interface.h" is
"NetworkManager.h", and the same applies there. Commit
159e827a72 removed that include.
However, that broke build on PackageKit [1] which expected to get the
version macros by including "NetworkManager.h". So at least for libnm-glib,
we need to preserve old behavior so that a user including
"NetworkManager.h" gets the version macros, but not "glib.h".
Extract the version macros to a new header file "nm-version-macros.h".
This header doesn't include "glib.h" and can be included from
"NetworkManager.h". This gives as previous behavior and a glib-free
include.
For libnm we still don't include "nm-version-macros.h" to "nm-dbus-interface.h".
Very few users will actually need the version macros, but not using
libnm.
Users that use libnm, should just include (libnm's) "NetworkManager.h" to
get all headers.
As a special case, a user who doesn't want to use glib/libnm, but still
needs both "nm-dbus-interface.h" and "nm-version-macros.h", can include
them both separately.
[1] https://github.com/hughsie/PackageKit/issues/85
Fixes: 4545a7fe96
Clone the connection upon activation. This makes it safe for the user
to modify the original connection while it is activated.
This involves several changes:
- NMActiveConnection gets @settings_connection and @applied_connection.
To support add-and-activate, we constructing a NMActiveConnection with
no connection set. Previously, we would set the "connection" field to
a temporary NMConnection. Now NMManager piggybacks this temporary
connection as object-data (TAG_ACTIVE_CONNETION_ADD_AND_ACTIVATE).
- get rid of the functions nm_active_connection_get_connection_type()
and nm_active_connection_get_connection_uuid(). From their names
it is unclear whether this returns the settings or applied connection.
The (few) callers should figure that out themselves.
- rename nm_active_connection_get_id() to
nm_active_connection_get_settings_connection_id(). This function
is only used internally for logging.
- dispatcher calls now get two connections as well. The
applied-connection is used for the connection data, while
the settings-connection is used for the connection path.
- needs special handling for properties that apply immediately
when changed (nm_device_reapply_settings_immediately()).
Co-Authored-By: Thomas Haller <thaller@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=724041
A GObject interface, like a class, has two different C types
associated with it; the type of the "class" struct (eg, GObjectClass,
GFileIface), and the type of instances of that class/interface (eg,
GObject, GFile).
NetworkManager was doing this wrong though, and using the same C type
to point to both the interface's class struct and to instances of the
interface. This ends up not actually breaking anything, since for
interface types, the instance type is a non-dereferenceable dummy type
anyway. But it's wrong, since if, eg, NMDeviceFactory is a struct type
containing members "start", "device_added", etc, then you should not
be using an NMDeviceFactory* to point to an object that does not
contain those members.
Fix this by splitting NMDeviceFactory into NMDeviceFactoryInterface
and NMDeviceFactory; by splitting NMConnectionProvider into
NMConnectionProviderInterface and NMConnectionProvider; and by
splitting NMSettingsPlugin into NMSettingsPluginInterface and
NMSettingsPlugin; and then use the right types in the right places.
As a bonus, this also lets us now use G_DEFINE_INTERFACE.
The localization headers are now included via "nm-default.h".
Also fixes several places, where we wrongly included <glib/gi18n-lib.h>
instead of <glib/gi18n.h>. For example under "clients/" directory.
This internal header file should be included by our internal source
code files and header files. It includes in one place other headers
that constitute to a minimal set of required headers. Most notably
this is <glib.h> and our "nm-glib.h" header.
Note that public header files and example source code cannot include
this file as "nm-default.h" is internal only.
Future patches will create devices long before they are backed by
kernel resources, so we need to split NMDevice object creation from
actual setup based on the backing resources.
This patch combines the NMDeviceFactory's new_link() and
create_virtual_device_for_connection() class methods into a single
create_device() method that simply creates an unrealized NMDevice
object; this method is not expected to fail unless the device is
supposed to be ignored. This also means that the NMDevice
'platform-device' property is removed, because a platform link
object may not be available at NMDevice object creation time.
After the device is created, it is then "realized" at some later
time from a platform link (for existing/hardware devices via the
realize() method) or from an NMConnection (for newly created software
devices via the create_and_realize() NMDeviceClass methods).
https://bugzilla.gnome.org/show_bug.cgi?id=737458
Create a GDBusProxy for the service to be monitored and use that to
tell whether it is running, rather than using NMDBusManager and the
global NameOwnerChanged signal.
Add NMExportedObject, make it the base class of all D-Bus-exported
types, and move the nm-properties-changed-signal logic into it. (Also,
make NMSettings use the same properties-changed code as everything
else, which it was not previously doing, presumably for historical
reasons).
(This is mostly just shuffling code around at this point, but
NMExportedObject will be more important in the gdbus port, since
gdbus-codegen doesn't do a very good job of supporting objects that
export multiple interfaces [as each NMDevice subclass does, for
example], so we will need more glue/helper code in NMExportedObject
then.)
