Previously, we directly passed the @in_ifcfg path to find_by_path().
That means, @in_ifcfg must be the path to the base "ifcfg-" file,
not an alias or route file.
Add an additional pre-check, that the provided file name is really a
ifcfg base file.
This results in a more detailed error message when calling
GetIfcfgDetails not on the ifcfg base file. It's not that previously
the lookup would have succeeded.
Up to now, the "include" directory contained (only) header files that were
used project-wide by libs, core, clients, et al.
Since the directory now also contains a non-header file, the "include"
name is misleading. Instead of adding yet another directory that is
project-wide, with non-header-only content, rename the "include"
directory to "shared".
This enum was unused and meaningless because the platform signals
are emitted as a consequence of netlink messages. It is not clear
whether a netlink message was received due to an external event
or an internal action.
Can't just substitute sysconfdir into a header file -- it's meant to be
expanded in a Makefile. Otherwise, unexpanded ${prefix} will end up in a
header file.
We do that for NMCONFDIR already, let's use it here too.
Fixes: 2144457fab
These properties limit whether the connection applies to a certain WWAN modem
based on the modem's device ID or SIM ID (as reported by the WWAN management
service), or through the MCC/MNC ID of the operator that issued the SIM card.
Old init-scripts that did not yet understand this key will have
mac-address-randomization explicitly disabled. This is to ensure
that old connections don't change behavior.
Thus, the writer must always write the value explicitly.
Downside is, if somebody creates a quick ifcfg-file, the feature
is disabled by default.
Prevsiouly, the ifcfg-rh service and the regular NetworkManager
were both exported on the same D-Bus connection. That had the
effect, that on both services ("com.redhat.ifcfgrh1" and
"org.freedesktop.NetworkManager") all objects were visible.
This is also problematic later when we use GDBusObjectManager
for the org.freedesktop.NetworkManager service.
Export the ifcfg service on a separate bus connection.
One downside is, that we don't bother exporting the service
on the private socket and thus the service is not available
without D-Bus daemon.
Also, if the bus disconnects, we don't retry or recover. Instead
the D-Bus service is dead until restart.
Take a missing value in keyfile/ifcfg-rh as EUI-64 to keep the compatibility
with the old conneciton. Nevertheless, the new connections should default to
the RFC7217 addresses.
Initscripts do:
oldifs=$IFS;
IFS=';';
[ -n "${ETHTOOL_DELAY}" ] && /bin/usleep ${ETHTOOL_DELAY}
for opts in $ETHTOOL_OPTS ; do
IFS=$oldifs;
if [[ "${opts}" =~ [[:space:]]*- ]]; then
/sbin/ethtool $opts
else
/sbin/ethtool -s ${REALDEVICE} $opts
fi
IFS=';';
done
IFS=$oldifs;
thus, we want to split on ';', otherwise we parse
"wol d;something else"
wrong.
Also, g_strsplit_set() returns multiple empty tokens. So
we must skip over empty tokens in case of "wol d".
The @use_password was wrong, because we would warn if sopass is specified
before wol:
"sopass AA:BB:CC:DD:EE:FF wol g"
More resilently handle wrong configurations:
"wol pu wol m" => gives m.
"wol pu wol" => should give NONE and warn (instead of "pu").
Also accept tab as separator.
Add a new 'ignore' option to NMSettingWired.wake-on-lan which disables
management of wake-on-lan by NetworkManager (i.e. the pre-existing
option will not be touched). Also, change the default behavior to be
'ignore' instead of 'disabled'.
https://bugzilla.gnome.org/show_bug.cgi?id=755182
Dracut when faced with an ipv6 only setup during kickstart will generate a ifcfg
file that sets the ipv4 address things to null but sets BOOTPROTO=static. This
makes network manager screw up because it expects an ipv4 address to be set.
Instead deal with this case by checking if we have any ipv4 addrs set, and if
not just disable ipv4. This fixes our inability to kickstart in our ipv6 only
clusters. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
https://mail.gnome.org/archives/networkmanager-list/2015-October/msg00015.html
Some initscripts variables can use "0" or "1" instead of more common
"yes", "no", for example REORDER_HDR.
And we also write REORDER_HDR=0|1 in writer.c, so we did not read REODER_HDR
correctly.
Fixes: ccea442504
The kernel defaults REORDER_HDR to 1 when creating a new VLAN, but
NetworkManager's VLAN flags property defaulted to 0. Thus REORDER_HDR was not
set for NM-created VLANs with default values.
We want to match the kernel default, so we change the default value for the
vlan.flags property. However, we do not want to change the flags for existing
connections if the property is missing in connection files. Thus we have to
update plugins for that. We also make sure that vlan.flags is always written
by 'keyfile' when the value is default. That way new connections have flags
property explicitly written and it will be loaded as expected.
https://bugzilla.redhat.com/show_bug.cgi?id=1250225
For libnm library, "nm-dbus-interface.h" contains defines like the D-Bus
paths of NetworkManager. It is desirable to have this header usable without
having a dependency on "glib.h", for example for a QT application. For that,
commit c0852964a8 removed that dependancy.
For libnm-glib library, the analog to "nm-dbus-interface.h" is
"NetworkManager.h", and the same applies there. Commit
159e827a72 removed that include.
However, that broke build on PackageKit [1] which expected to get the
version macros by including "NetworkManager.h". So at least for libnm-glib,
we need to preserve old behavior so that a user including
"NetworkManager.h" gets the version macros, but not "glib.h".
Extract the version macros to a new header file "nm-version-macros.h".
This header doesn't include "glib.h" and can be included from
"NetworkManager.h". This gives as previous behavior and a glib-free
include.
For libnm we still don't include "nm-version-macros.h" to "nm-dbus-interface.h".
Very few users will actually need the version macros, but not using
libnm.
Users that use libnm, should just include (libnm's) "NetworkManager.h" to
get all headers.
As a special case, a user who doesn't want to use glib/libnm, but still
needs both "nm-dbus-interface.h" and "nm-version-macros.h", can include
them both separately.
[1] https://github.com/hughsie/PackageKit/issues/85
Fixes: 4545a7fe96
The GATEWAY from /etc/sysconfig/network file is used as a default value when
no GATEWAY is in ifcfg file. However, we have to ignore that GATEWAY for
connections without static addresses. Otherwise such connections would be
invalid and would disappear after restart/reaload.
Some notes:
Putting GATEWAY into /etc/sysconfig/network is not recommended, because it
inherently belongs to the ifcfg file as it is a per-interface property.
The recommended practice is to specify GATEWAY in individual ifcfg files and
define DEFROUTE=no if the interface should not get the default route.
But we continue to read GATEWAY from /etc/sysconfig/network for compatibility
reasons.
See also
https://bugzilla.redhat.com/show_bug.cgi?id=896198#c25https://bugzilla.redhat.com/show_bug.cgi?id=896198#c27
Fixes: f17699f4e3https://bugzilla.redhat.com/show_bug.cgi?id=1262972
A GObject interface, like a class, has two different C types
associated with it; the type of the "class" struct (eg, GObjectClass,
GFileIface), and the type of instances of that class/interface (eg,
GObject, GFile).
NetworkManager was doing this wrong though, and using the same C type
to point to both the interface's class struct and to instances of the
interface. This ends up not actually breaking anything, since for
interface types, the instance type is a non-dereferenceable dummy type
anyway. But it's wrong, since if, eg, NMDeviceFactory is a struct type
containing members "start", "device_added", etc, then you should not
be using an NMDeviceFactory* to point to an object that does not
contain those members.
Fix this by splitting NMDeviceFactory into NMDeviceFactoryInterface
and NMDeviceFactory; by splitting NMConnectionProvider into
NMConnectionProviderInterface and NMConnectionProvider; and by
splitting NMSettingsPlugin into NMSettingsPluginInterface and
NMSettingsPlugin; and then use the right types in the right places.
As a bonus, this also lets us now use G_DEFINE_INTERFACE.
Since there have not been separate system and user settings services
since 0.8, the "system" in NMSystemConfigInterface is kind of
meaningless. Rename it to NMSettingsPlugin, which describes what it
does better.
This is just:
git mv src/settings/nm-system-config-interface.h src/settings/nm-settings-plugin.h
git mv src/settings/nm-system-config-interface.c src/settings/nm-settings-plugin.c
perl -pi -e 's/SystemConfigInterface/SettingsPlugin/g;' \
-e 's/system_config_interface/settings_plugin/g;' \
-e 's/system-config-interface/settings-plugin/g;' \
-e 's/SYSTEM_CONFIG_INTERFACE/SETTINGS_PLUGIN/g;' \
-e 's/sc_plugin/settings_plugin/g;' \
-e 's/SC_PLUGIN/SETTINGS_PLUGIN/g;' \
-e 's/SC_IS_PLUGIN/SETTINGS_IS_PLUGIN/g;' \
-e 's/SC_TYPE_PLUGIN/SETTINGS_TYPE_PLUGIN/g;' \
-e 's/SCPlugin/SettingsPlugin/g;' \
-e 's/nm_system_config_factory/nm_settings_plugin_factory/g;' \
$(find src/settings -type f)
(followed by some whitespace fixups in nm-settings-plugin.c, and a
Makefile.am fix for the rename)
The logging macros _LOGD(), etc. are specific to each
file as they format the message according to their context.
Still, they were cumbersome to define and their implementation
was repeated over and over (slightly different at times).
Move the declaration of these macros to "nm-logging.h".
The source file now only needs to define _NMLOG(), and either
_NMLOG_ENABLED() or _NMLOG_DOMAIN.
This reduces code duplication and encourages a common implementation
and usage of these macros.
Advantages:
- use current best-pratice
- registers a weak-ref to clear @singleton_instance when the
instance gets destroyed
- logs creation and destruction of singleton
- on shutdown, destroy the singleton instance via
_nm_singleton_instance_register_destruction(). Note, that
we now have yet another reference to the singleton that is
owned by register-destruction.
There is no need to have a static @singleton variable.
The only caller of nm_settings_keyfile_plugin_new() is
NMSettings which owns the singleton instance.
A *_new() function should just create a new instance and
that's it. It's unexpected to reuse the same instance.
Move the check for a platform link before devtimeout_from_file(). The
check in the platform cache should be more performant and yield success
in most cases.
This can save reading and parsing the ifcfg-rh file.
If NIC related initialization takes a long time in udev processing, but we have
an ifindex from kernel, we still want to wait until udev is finished and the
device is really usable.
Check that by calling nm_platform_link_get_by_ifname() and checking @initialized,
which means udev is finished.
Based on a patch by t-nishimura@hf.jp.nec.com
Improved by thaller@redhat.comhttps://bugzilla.redhat.com/show_bug.cgi?id=1192633
Port remaining bits to gdbus and remove stray dbus-glib references
Drop the dbus-glib version check from configure, since nothing depends
on new dbus-glib any more.
Move nm-dbus-glib-types.h and nm-gvaluearray-compat.h from include/ to
libnm-util/ since they are now only used by libnm-util and libnm-glib.
