* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerSUSE.c
- Fix invocations of "/sbin/ip address" to use short form instead
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@968 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Bill Nottingham <notting@redhat.com>
* src/backends/NetworkManagerRedHat.c
- Add initial dialup support to Red Hat/Fedora backend
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@922 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Colin Slater:
* src/backends/NetworkManagerGentoo.c
- (nm_system_update_dns): Fix exit status check for restarting
nscd
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@827 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/backends/NetworkManagerDebian.c
- Add nm_system_device_get_use_dhcp() to debian backend
Patch from Kay Sievers:
* src/backends/NetworkManagerSuSE.c
- Update debian backend for static IP nameservers
* src/NetworkManagerDevice.c
- Actually set the device to use static IP or DHCP rather
than always DHCP
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@671 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/backends/NetworkManagerRedHat.c
- (get_current_profile_name): new function, grab current network profile name from
/etc/sysconfig/network
- (set_ip4_config_from_resolv_conf): new function, parse a resolv.conf and
update an IP4 Config structure's settings from it
- (nm_system_device_get_system_config): if we're using static IP on this device,
get DNS info from current network profile
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@661 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Kay Sievers and Robert Love:
* configure.in
src/backends/Makefile.am
src/backends/NetworkManagerSuSE.c
- Add SuSE support
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@659 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tomislav Vujec <tvujec@redhat.com>
* gnome/applet/applet-dbus-info.c
- (nmi_dbus_get_vpn_connection_routes): new function, pull routes out of
GConf and pass them to NetworkManager. New key is 'routes' under
the VPN connection, and should be a string list
* src/NetworkManagerSystem.c
- (nm_system_vpn_device_set_from_ip4_config): if user-defined routes exist,
set them on the device when we set the rest of the VPN config. Ensure
they are in the correct format since they are passed directly to the
command line.
* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerDebian.c
- (nm_system_device_add_route_via_device_with_iface): new function
* src/vpn-manager/nm-dbus-vpn.c
- (nm_dbus_vpn_get_routes): grab VPN routes from NetworkManagerInfo
* src/vpn-manager/nm-vpn-manager.c
- (nm_vpn_manager_handle_ip4_config_signal): grab routes from NMI and pass
them into the IP4 config functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@637 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-dbus-device.c
gnome/applet/applet-dbus-info.c
gnome/applet/applet-dbus.c
gnome/applet/applet.c
gnome/applet/applet.h
- (nmwa_get_device_for_nm_device) -> (nmwa_get_device_for_nm_path)
* gnome/applet/applet-dbus.c
- (nmwa_dbus_filter): trap DeviceCarrierOn/DeviceCarrierOff signals
so we notice when wired device's carriers come back on. Should
fix issue with wired devices being grayed out even if the cable
is in, for devices that support carrier detection.
* gnome/applet/applet.c
- (nmwa_driver_notify): bash focus-stealing prevention in the face
- (nmwa_act_stage_to_pixbuf): Clarify wireless ACT_STAGE_DEVICE_CONFIG
tooltip message
- (nmwa_menu_item_activate, nmwa_menu_add_device_item, nmwa_menu_item_data_free):
Fix situation where applet wouldn't respond to menu selections
* src/NetworkManager.c
src/NetworkManagerDevice.c
src/NetworkManagerDbus.c
src/NetworkManagerDbus.h
- (nm_dbus_signal_device_status_change) -> (nm_dbus_schedule_device_status_change_signal)
* src/NetworkManagerDbus.c
- (nm_dbus_send_network_not_found, nm_dbus_schedule_network_not_found_signal):
Remove, no longer used or relevant
- (nm_dbus_signal_device_status_change): Better signal enum->string matching
- (nm_dbus_schedule_device_status_change_signal): add
* src/NetworkManagerDevice.c
- (nm_device_worker_thread_stop): don't try to join a NULL worker thread
- (nm_device_set_link_active): Fix up switching for non-carrier-detect devices,
ie don't deactivate them unless explicitly told to by the user. Also send
CARRIER_OFF / CARRIER_ON signals when link changes
- (nm_device_set_essid, nm_device_set_enc_key, nm_device_is_up, nm_device_set_mode):
Don't print error message when device is no longer around
- (nm_device_deactivate): kill any current DHCP process attached to this device,
not just during activation
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): Ignore semi-supported devices completely from
auto-device-selection.
- (nm_policy_device_change_check): Don't interrupt semi-supported devices
* src/NetworkManagerSystem.c
- (nm_system_device_set_up_down_with_iface): Quiet first warning message when device
is no longer present (Bill Moss)
* src/backends/shvar.c
- (svOpenFile): Open read-only to make SELinux happy
* src/backends/NetworkManagerRedHat.c
- (nm_system_device_get_system_config): Use SYSCONFDIR rather than hardcoding
the path to the ifcfg-* files
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@613 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Kill dhcpcd. We now use "dhcdbd", a dbus daemon that controls dhclient.
This means that NetworkManager shouldn't have DHCP issues anymore. It also
means you need dhcdbd, which you can get here (get the latest one):
http://people.redhat.com/jvdias/dhcdbd/
Technically NetworkManager can use any DHCP daemon that uses the same DBUS
interface as dhcdbd.
* Rewrite device activation to facilitate the new DHCP infrastructure and
future improvements. Its now "activation request" based, ie there is a single
activation request composed of the device, access point, and other info which
follows the entire activation process. There are 5 stages of the activation
process which correspond to:
1) Device preparation
2) Device configuration (bring it up, set ESSID/Key/etc)
3) IP Config Start (fire off DHCP if we're using it)
4) IP Config Get (grab config from DHCP or static config files)
5) IP Config Commit (set device's IP address, DNS, etc)
Note that there is no longer a "scanning" step, since the access point must
be known _before_ activation starts. If the access point drops out or does
not exist for some reason, the entire activation process fails and must be
restarted for a different access point or device.
Patch from Bill Moss:
* gnome/applet/applet.c
- Fix type of vpn_failure dialog -> vpn_banner dialog
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@597 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Initial VPN Support
- supports 'vpnc'
- reworks device IP configuration, backend files have changed and will need
to be updated for all distributions. I will try to do what I can for
them, but I cannot test them.
- Move named directory to src/named-manager
- Make backends directory self-contained
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@571 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Tighten up handling of wireless devices that don't support wireless
scanning (ie, Orinoco). Due to restructuring of code, these devices
hadn't been doing pseudo-scanning for a while either and would just
spin waiting for an access point. They are now manual devices where
the user must choose the access point from the menu every time. All
"allowed" access points are listed in the applet's menu regardless
of whether or not they can be seen by the card, since it can't scan
anyway.
* src/NetworkManager.c
- (nm_wireless_link_state_handle): new function, but only update
the "best" ap for non-scanning devices when its not activating,
and when no device is being forced on the card
- (nm_link_state_monitor): split wireless link state handling out
into separate function
* src/NetworkManagerDevice.c
- (nm_device_copy_allowed_to_dev_list): new function
- (nm_device_new): populate non-scanning cards' AP lists with
access points from the "allowed" list
- (nm_device_new): don't start a scanning timeout for devices that
can't scan
- (nm_device_activation_schedule_finish): new parameter, should be
the AP that failed to be connected to, pass it on to the
activation finish function in NetworkManagerPolicy.c
- (nm_device_activate_wireless): don't ever try to get a new AP
for non-scanning devices, just fail. The user must choose
a new access point manually.
- (nm_device_activate): grab the AP that failed connection and
pass it on
- (nm_device_update_best_ap): Clear the best AP if we don't have
a link to it, user must manually choose a new one
- (nm_device_do_pseudo_scan): remove function
- (nm_device_wireless_process_scan_results): remove bits for non-
scanning cards since they never get here
- (nm_device_wireless_scan): remove bits for non-scanning devices,
and fake the scan list for test devices a bit earlier
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): use the failed_ap that we get
passed rather than getting the best_ap from the card, which
may have changed since we were scheduled
- (nm_policy_allowed_ap_list_update): for non-scanning devices,
update their scan list directly from the allowed list when
we get updates to the allowed list from NetworkManagerInfo
* src/NetworkManagerPolicy.h
- New member for failed access point in NMActivationResult
-------------------------------------
Driver Notification patch: notifies the user when their driver
sucks. Gives them the option to ignore further insertions
of the card that has the sucky driver.
* NetworkManager.h
- Remove the SEMI_SUPPORTED member from the NMDriverSupportLevel
enum and replace it with NO_CARRIER_DETECT and
NO_WIRELESS_SCAN
* panel-applet/NMWirelessApplet.[ch]
- Merge essid.glade -> wireless-applet.glade
- Implement the "Your driver sucks" notification dialog
* panel-applet/NMWirelessAppletDbus.c
- Change stuff from getSupportsCarrierDetect->getDriverSupportLevel
- Grab hardware address for each device from NM too
- Check whether the driver for each device sucks or not whenever
a new device is noticed
* panel-applet/NMWirelessAppletOtherNetworkDialog.c
- Deal with stuff being in wireless-applet.glade now rather than essid.glade
* src/NetworkManager.c
- Fix a double-unref on device removal
* src/NetworkManagerUtils.c
- Set appropriate driver support level on a device that doesn't
support scanning or carrier detection
* src/nm-dbus-device.c
- New "getHWAddress" dbus method on devices
- getSupportsCarrierDetect -> getDriverSupportLevel
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@534 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- (nmwa_about_cb): Add some more contributors
- (nmwa_update_state): show the applet when there's no connection
- Enable the "Stop/Resume all wireless devices" option in the
context menu
- New "no connection" icon
* src/NetworkManager.c
- (nm_poll_and_update_wireless_link_state): don't do anything if
wireless is disabled or we're asleep
* src/NetworkManagerDHCP.c
- Remove trailing "\n" on debug messages
* src/NetworkManagerDbus.c
- (nm_dbus_network_status_from_data): new state "asleep"
* src/NetworkManagerDevice.c
- Merge most of Peter Jones' "completion" patch that greatly reduces
latency and wait times for most operations
- (nm_device_wireless_scan): Don't scan when asleep
* src/NetworkManagerPolicy.c
- (nm_policy_get_best_device): return no device when asleep
- (nm_policy_allowed_ap_list_update): From Bill Moss: merge properties
for all wireless devices on update, not just active device
* src/NetworkManagerUtils.c
- Merge Peter Jones' "completion" patch
* src/nm-dbus-nm.c
- (nm_dbus_nm_set_wireless_enabled): bring down wireless devices when
we're told to disable them
- (nm_dbus_nm_sleep, nm_dbus_nm_wake): new functions for sleep/wake
* utils/nm-utils.h
- New variants of the warn/info/error/debug print functions that can take
variables rather than static strings
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@510 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fourth (probably working) cut at porting to
dbus 0.30 api and new hal. This cut adds
some new logging macros to make debugging
easier.
* dispatcher-daemon/NetworkManagerDispatcher.c:
* info-daemon/NetworkmanagerInfo.c:
* info-daemon/NetworkManagerInfoPassphraseDialog.c:
* info-daemon/NetworkManagerInfoVPN.c:
* src/NetworkManager.c:
* src/NetworkManagerAP.c:
* src/NetworkManagerAPList.c:
* src/NetworkManagerDHCP.c:
* src/NetworkManagerDbus.c:
* src/NetworkManagerDevice.c:
* src/NetworkManagerPolicy.c:
* src/NetworkManagerSystem.c:
* src/NetworkManagerUtils.c:
* src/NetworkManagerWireless.c:
* src/autoip.c:
* src/nm-dbus-nm.c:
* src/backends/NetworkManagerDebian.c:
* src/backends/NetworkManagerGentoo.c:
* src/backends/NetworkManagerRedHat.c:
* src/backends/NetworkManagerSlackware.c:
use new logging macros.
* dispatcher-daemon/NetworkManagerDispatcher.c:
(nmd_dbus_filter): s/dbus_free/g_free/
* info-daemon/Makefile.am: link in utils library.
* info-daemon/NetworkmanagerInfo.c: use new logging
macros.
(nmi_dbus_get_network): don't assume enumerations
are 32-bit.
(nmi_dbus_nmi_message_handler): don't free what
doesn't belong to us.
* libnm_glib/libnm_glib.c:
(libnm_glib_get_nm_status):
(libnm_glib_init): don't free what doesn't
belong to us.
(libnm_glib_dbus): strdup result, so it doesn't get
lost when message is unref'd.
* panel-applet/NMWirelessAppletDbus.c:
(nmwa_dbus_update_devices): s/dbus_free/g_free/
* src/NetworkManager.c:
(nm_monitor_wired_link_state): request initial status
dump of all cards when we start up, instead of relying
on /sys/.../carrier.
(nm_info_handler), (nm_set_up_log_handlers):
log handlers to specify what syslog priorites
the logging macros default to.
* src/NetworkManagerAPList.c:
(nm_ap_list_populate_from_nmi):
s/dbus_free_string_array/g_strfreev/
* src/NetworkManagerDbus.c:
(nm_dbus_get_network_object):
validate d-bus message argument types.
Advance message iterator after reading argument,
prepend instead of append to GSList.
* src/NetworkManagerDevice.c:
(nm_device_probe_wired_link_status):
remove redundant /sys in /sys path. remove wrong
contents == NULL means has carrier assumption.
* src/nm-netlink-monitor.c
(nm_netlink_monitor_request_status): implement
function to ask kernel to dump interface link
status over netlink socket.
* test/*.c: s/dbus_free/g_free/
* utils/nm-utils.h:
(nm_print_backtrace): new macro to print backtrace.
(nm_get_timestamp): new macro to get sub-second precise
unix timestamp.
(nm_info), (nm_debug), (nm_warning), (nm_error):
new logging functions. nm_info just prints,
nm_debug includes timestamp and function,
nm_warning includes function, nm_error includes
backtrace and sigtrap.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@497 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/backends/NetworkManagerRedHat.c
- (nm_system_init): Kill any dhclient processes lying around as well
as stopping 'nifd' if its already been started. NetworkManager
subsumes the functions of nifd (kicking mDNSResponder, autoip)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@479 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/backends/NetworkManagerRedHat.c
- For non-caching-nameserver/non-named case, ensure that nscd is running
and that we actually tell nscd to reload the hosts cache when it changes
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@472 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): Deactivate a device if its activation fails,
and NULL out data->active_device so that we have to choose another one.
This may make NetworkManager keep attempting to connect to a wired network
if it fails, but if it keeps failing the wired network has more problems than
just NetworkManager.
* src/backends/NetworkManagerRedHat.c
- (nm_system_update_dns): fix to actually run nscd -i hosts when nscd
is already running
* named/nm-named-manager.c
- (rewrite_resolv_conf): Call nm_system_update_dns() when not using
named so that the distro can flush whatever name service caching
daemon it uses
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@468 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- (dhcp_init): only print out client ID and class ID if they are specified
* src/NetworkManagerDbus.[ch]
src/nm-dbus-nm.[ch]
src/nm-dbus-device.[ch]
src/nm-dbus-net.[ch]
- Move NM, Device, and Net functions to separate files and use the
dbus method list stuff in NetworkManagerDbusUtils.c to do
method dispatching
* src/NetworkManagerDbusUtils.c
- Add new validate_method called before each dispatch (if present)
that can validate the method call
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): Fix misplaced "!" that caused signal
levels never to be evaluated
Patch from j@bootlab.org
* src/NetworkManagerDevice.c
- Add typedef for "u64"
* src/backends/NetworkManagerDebian.c
- Copy in Dave Woodhouse's fixes for IPv6
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@438 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Dave Woodhouse:
* src/NetworkManagerSystem.h
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerSlackware.c
- New nm_system_device_add_ip6_link_address() function to add link-local
address on an interface. Stubbed in Debian, Gentoo, and Slackware.
* src/backends/NetworkManagerRedHat.c
- (nm_system_device_add_ip6_link_address): implement
- (nm_system_device_flush_addresses): revert to previous behavior of
flushing all addresses
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@432 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- #rh147661# Don't send kernel version in DHCP requests
* src/NetworkManagerSystem.h
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
- Remove the nm_system_device_run_dhcp() and nm_system_device_stop_dhcp()
functions, they are no longer used anyway
* src/backends/NetworkManagerRedHat.c
- (nm_system_device_flush_addresses): only flush "scope global" and "scope site"
addresses in an attempt to keep IPv6 local-scope addresses around
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@428 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Rework the DHCP client code to be much less chatty when
it receives non-DHCP UDP packets during the DHCP run
(reported by and preliminary patches from Bill Moss)
* Move wireless scanning to a separate thread. This thread forwards the
results to the main thread when done where they are integrated into
the device's access point lists. This keeps the main thread (which
does all the DBUS communication) from being blocked for long periods
of time by wireless scanning.
* Make state modification an idle routine in the main loop, and trigger
state changes rather than polling for them.
* src/backends/NetworkManagerGentoo.c
- Fix up invalid C90 code (reported by Christoph Ruessler)
* src/NetworkManagerDevice.c
- Revert IPv6 patch for wired devices from 2004-12-22 for
router advertisements, causing problems and infinite loop
during "best" device determination due to link going up/down
(reported by Bill Moss)
Apply patch from Peter Jones
* src/NetworkManagerDevice.c
- Shortcut for link-checking for ipw2x00 cards
- Split out association check into separate routine
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@360 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- Silently fail when setting bitrate doesn't work
Patch from j@bootlab.org:
* src/backends/NetworkManagerDebian
- Update backend to match functionality in RedHat backend
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@355 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Ad Ad-Hoc networking mode support. In Ad-Hoc mode, we only try to get
link-local addresses instead of doing DHCP.
* In the panel applet, there's a new "Create new Wireless Network..." item
* The panel applet also sticks around now even if NetworkManager dies, but
it doesn't hide its icon when NM isn't around. Not hiding the icon is
a bug, I'll fix that later.
* We also don't use 'nscd' anymore in the RH backend, it was impeding name
lookups after a switch rather than actually doing them.
* Clean up some of those warnings in nm_ap_list_* functions
* Delay between scans changed to 15s instead of 10s
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@342 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tom Parker
* Add autoip/Link Local Addressing support when we fail to get a DHCP
address
* Longer pause after setting ESSID on cards that support a larger number
of channels to give the card time to find the right channel
* Add system hook to restart mDNSResponder (or whatever the local implementation
of Multicast DNS is) when we activate interfaces
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@341 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Major rework of the DHCP code, taking some cues from pump. We don't
write raw Ethernet packets anymore, which simplifies the code quite
a bit. The new code should be more robust, not hang in recvfrom()
as much, and generally work better. This also means that we need
to force HAL/dbus to use a created GMainContext rather than the
default context, since having the DHCP renew/rebind thread using
its own GMainContext seemed to give dbus a fit. There is also more
debugging information printed from the DHCP loop to help with future
problems.
* Also, if the DHCP server doesn't give us the "routersOnSubnet" option,
assume that the default gateway should be the DHCP server.
Patch from Matthew Schick <matt oss-institute org>
* src/backends/NetworkManagerGentoo.c
- Fix compilation error due to missing "ip4_broadcast"
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@336 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/backends/NetworkManagerRedHat.c (nm_system_update_dns): Run
"nscd -i hosts" to invalidate the host cache instead of restarting nscd,
which is essentially a noop since nscd caches hosts on disk too.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@322 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Major rework of link detection code. We now use DHCP
as part of the link detection which proves to be much more robust,
and also supports Open System authentication for wireless networks.
We no longer use external DHCP client programs. Instead, we use
our own DHCP client, based on substantially reworked bits of 'dhcpcd'
which was written by:
Yoichi Hariguchi <yoichi@fore.com>
Sergei Viznyuk <sv@phystech.com>
http://www.phystech.com/download/
It resides in the "dhcpcd" directory and was refactored into a general
purpose DHCP client library by me.
Also misc fixes (CPPFLAGS->AM_CPPFLAGS, move some stuff around),
move src/backends/NetworkManagerSystem.h -> src/NetworkManagerSystem.h
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@314 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tom Parker <palfrey@tevp.net>:
* src/backends/interface_parser.c
- Use g_strdup ()
- Check for inp == NULL
- use syslog ()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@312 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tom Parker <palfrey@tevp.net>:
* src/Makefile.am (CPPFLAGS): Switch to AM_CPPFLAGS.
* src/backends/NetworkManagerRedHat.c: Switch to
including shvar.h instead of shvar.c.
* src/backends/NetworkManagerDebian.c: Don't include
interface_parser.c in source file.
(libnmbackend_la_SOURCES): Don't include shvar.[ch]
and interface_parser.[ch].
* src/Makefile.am (libnmbackend_la_SOURCES) <TARGET_REDHAT>:
Include shvar.c and shvar.h here.
(libnmbackend_la_SOURCES) <TARGET_DEBIAN>: Include
interface_parser.c and interface_parser.h here.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@310 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patches from j bootlab org
* src/NetworkManagerDevice.c
- (nm_device_activate_wireless): wait 5 seconds before attempting to detect
whether the card has a link or not, some cards are slow
- (nm_device_activation_configure_ip): make ipv6 work a bit better
* info-daemon/NetworkManagerInfoPassphraseDialog.c
- Disable the "Login" button on the passphrase dialog until the user
enters a valid passphrase or key
Patches from Tom Parker <palfrey tevp net>
* src/backends/NetworkManagerDebian.c
- Add static IP support to the debian backend
* src/backends/interface_parser.[ch]
- Parse debian interface config files
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@303 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
