* src/NetworkManagerSystem.c, src/NetworkManagerSystem.h: Add
nm_system_get_mtu(), which returns a user-provided or system-mandated
MTU value for a given device, if any, or zero if no such value
exists. Add nm_system_set_mtu() to set the MTU for a given device
if we have a provided value.
* src/nm-device.c: Set the MTU of devices.
* src/backends/NetworkManagerSuSE.c: Read MTU, if any, from sysconfig.
* src/backends/NetworkManagerDebian.c,
src/backends/NetworkManagerGentoo.c,
src/backends/NetworkManagerRedHat.c,
src/backends/NetworkManagerSlackware.c: Implement stub functions.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1626 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Process netlink messages in device subclasses rather than in
NetworkManager.c. Also add support for recognizing Wireless Events.
* configure.in
- Find GLIB_GENMARSHAL
* src/Makefile.am
- Since we're marshalling custom types for wireless event signals,
we get to create our own marshallers using GLIB_GENMARSHAL
* src/NetworkManager.c
- (nm_monitor_wired_link_state): renamed to nm_monitor_setup
- (nm_monitor_setup): renamed from nm_monitor_wired_link_state, and
cut down somewhat. We no longer process signals here.
- (nm_data_new): create the netlink monitor here, and remove a
useless call to nm_policy_schedule_device_change_check()
- (nm_data_free): get rid of the netlink monitor here
- (nm_device_link_activated, nm_device_link_deactivated): removed
- (main): don't create the netlink monitor here, let nm_data_new
do that. Call nm_policy_schedule_device_change_check() right
before we jump to the mainloop to figure out which device
to use first
* src/NetworkManagerSystem.[ch]
- (nm_system_get_rtnl_index_from_iface, nm_system_get_iface_from_rtnl_index):
convert back and forth from interface names to interface
indexes
* src/nm-device-802-11-wireless.c
- (real_init): connect to wireless-event signals from the netlink
monitor object
- (nm_device_802_11_wireless_event): new function, schedule handler
for wireless event signals from the netlink monitor object. We
want the handler to run in the device's context
- (wireless_event_helper): handle wireless-event signals from netlink
- (nm_device_802_11_wireless_dispose): disconnect wireless-event
signal handler
* src/nm-device-802-11-wireless.h
- remove unused prototype for nm_device_802_11_wireless_new
* src/nm-device-802-3-ethernet.c
- (real_init): new function; set up signal handlers for link events
- (nm_device_802_3_ethernet_link_activated): new function, schedule
handler for netlink link activated events on device's main loop
- (link_activated_helper): when we get a link activated event, set
the device's link to be active
- (nm_device_802_3_ethernet_link_deactivated): new function; schedule
handler for netlink link deactivated events on device's main loop
- (link_deactivated_helper): when we get a link deactivated event, set
the device's link to be inactive
- (nm_device_802_3_ethernet_dispose): disconnect signal handler on
dispose
* src/nm-device-802-3-ethernet.h
- remove unused prototype for nm_device_802_3_ethernet_new
* src/nm-device.[ch]
- (nm_get_device_by_iface_locked): variant of nm_get_device_by_iface
but locks the device list
- (nm_device_set_active_link): a little bit of cleanup and de-indenting
* src/nm-netlink-monitor.[ch]
- (nm_netlink_monitor_class_install_signals): New signal
"wireless-event"
- (nm_netlink_monitor_new): keep reference to NMData so we can get
at the device list
- (nm_netlink_monitor_event_handler): expand for wireless events too
* src/nm-marshal-main.c
- Include generated nm-marshal.c and nm-marshal.h
* src/nm-marshal.list
- List of custom marshal functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1555 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by Sureshkumar T <tsureshkumar@novell.com>:
* src/vpn-manager/nm-vpn-connection.c, src/NetworkManagerSystem.c:
Check for and handle empty string for iface.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1426 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by T Sureshkumar <tsureshkuman@novell.com>:
* src/NetworkManagerSystem.c: Don't assert iface != NULL, allowing VPN
modules that do not use an interface.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1329 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by Preggna S:
* src/NetworkManagerSystem.c, src/vpn-manager/nm-vpn-connection.c:
IPsec does not require that a VPN client be bound to an interface,
due to the use of the in-kernel IPSec bits. So make the tunnel
device optional.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1258 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* refactor NMDevice into a GObject-based framework with separate
objects for wired and wireless. The following files are no
longer used but should stick around for a bit so we don't
loose code through the cracks:
NetworkManagerDevice.c
NetworkManagerDevice.h
NetworkManagerWireless.c
NetworkManagerWireless.h
The intent here is to allow each device type to manage its own
connection & activation life-cycle, ie to allow wireless devices
to interface with wpa_supplicant, etc. There's a fair bit of
encapsulation breakage right now that should gradually get pulled
back into each device, along with things like periodic property
updates and link probing.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1244 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerSystem.c: If iface_to_rtnl_link() returns NULL, the
interface is already gone, so don't call rtnl_link_change() to down
it (which will segfault, anyhow).
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1114 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Start using libnl. You need 1.0-pre3 or higher. Eventually
we should replace most of the distro-specific backend code
with libnl stuff.
Get it here: http://people.suug.ch/~tgr/libnl/
* configure.in
src/Makefile.am
- Add checks for libnl pkgconfig file
- Use LIBNL_LIBS & LIBNL_CFLAGS
* src/NetworkManagerSystem.c
src/nm-ip4-config.[ch]
- Use libnl rather than ioctl() for most things
- Remove unused functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1082 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Support for named + DBus, using Red Hat DBus patches for named. You
can find those patches here, with "dbus" in the patch's filename:
http://cvs.fedora.redhat.com/viewcvs/devel/bind/
Don't forget the named dbus service file either.
Instead of writing a config file and spawing a named process, NM will
use an already-running dbus-enabled named if it finds one. NM will
update named's forwarder configuration on the fly using dbus.
If there is no dbus-enabled named running, NM will automatically fall
back to writing the most-recent DNS server information to /etc/resolv.conf
and calling nm_system_update_dns() to kick the system's resolver.
Accordingly, all named-related configure-time options have been removed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@981 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tomislav Vujec <tvujec@redhat.com>
* gnome/applet/applet-dbus-info.c
- (nmi_dbus_get_vpn_connection_routes): new function, pull routes out of
GConf and pass them to NetworkManager. New key is 'routes' under
the VPN connection, and should be a string list
* src/NetworkManagerSystem.c
- (nm_system_vpn_device_set_from_ip4_config): if user-defined routes exist,
set them on the device when we set the rest of the VPN config. Ensure
they are in the correct format since they are passed directly to the
command line.
* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerDebian.c
- (nm_system_device_add_route_via_device_with_iface): new function
* src/vpn-manager/nm-dbus-vpn.c
- (nm_dbus_vpn_get_routes): grab VPN routes from NetworkManagerInfo
* src/vpn-manager/nm-vpn-manager.c
- (nm_vpn_manager_handle_ip4_config_signal): grab routes from NMI and pass
them into the IP4 config functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@637 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-dbus-device.c
gnome/applet/applet-dbus-info.c
gnome/applet/applet-dbus.c
gnome/applet/applet.c
gnome/applet/applet.h
- (nmwa_get_device_for_nm_device) -> (nmwa_get_device_for_nm_path)
* gnome/applet/applet-dbus.c
- (nmwa_dbus_filter): trap DeviceCarrierOn/DeviceCarrierOff signals
so we notice when wired device's carriers come back on. Should
fix issue with wired devices being grayed out even if the cable
is in, for devices that support carrier detection.
* gnome/applet/applet.c
- (nmwa_driver_notify): bash focus-stealing prevention in the face
- (nmwa_act_stage_to_pixbuf): Clarify wireless ACT_STAGE_DEVICE_CONFIG
tooltip message
- (nmwa_menu_item_activate, nmwa_menu_add_device_item, nmwa_menu_item_data_free):
Fix situation where applet wouldn't respond to menu selections
* src/NetworkManager.c
src/NetworkManagerDevice.c
src/NetworkManagerDbus.c
src/NetworkManagerDbus.h
- (nm_dbus_signal_device_status_change) -> (nm_dbus_schedule_device_status_change_signal)
* src/NetworkManagerDbus.c
- (nm_dbus_send_network_not_found, nm_dbus_schedule_network_not_found_signal):
Remove, no longer used or relevant
- (nm_dbus_signal_device_status_change): Better signal enum->string matching
- (nm_dbus_schedule_device_status_change_signal): add
* src/NetworkManagerDevice.c
- (nm_device_worker_thread_stop): don't try to join a NULL worker thread
- (nm_device_set_link_active): Fix up switching for non-carrier-detect devices,
ie don't deactivate them unless explicitly told to by the user. Also send
CARRIER_OFF / CARRIER_ON signals when link changes
- (nm_device_set_essid, nm_device_set_enc_key, nm_device_is_up, nm_device_set_mode):
Don't print error message when device is no longer around
- (nm_device_deactivate): kill any current DHCP process attached to this device,
not just during activation
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): Ignore semi-supported devices completely from
auto-device-selection.
- (nm_policy_device_change_check): Don't interrupt semi-supported devices
* src/NetworkManagerSystem.c
- (nm_system_device_set_up_down_with_iface): Quiet first warning message when device
is no longer present (Bill Moss)
* src/backends/shvar.c
- (svOpenFile): Open read-only to make SELinux happy
* src/backends/NetworkManagerRedHat.c
- (nm_system_device_get_system_config): Use SYSCONFDIR rather than hardcoding
the path to the ifcfg-* files
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@613 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Suggestion from Bill Moss:
* src/NetworkManagerSystem.c
- (nm_system_device_set_up_down_with_iface): ignore ENODEV
* src/NetworkManager.c
- (nm_data_free): move destruction of the various managers after
release of device list, because deactivating and freeing a device
requires at least the named manager
- (nm_poll_and_update_wireless_link_state):
(nm_device_link_activated):
(nm_device_link_deactivated):
don't grab the device list lock when actually updating device
link status or strength, since nm_device_set_link_active()
needs to call nm_get_active_device(), which also locks the device list.
* src/NetworkManagerDevice.c
- (nm_device_set_link_active): if a device's link switches from off->on,
and it's wired, and the active device is wireless (or there is no
active device), activate the new device whose link just came on
- (link_to_specific_ap): try to smooth over intermittency in wireless links
my only calling the link to the current ap "failed" when more than 2
consecutive link checks have failed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@606 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- (nm_device_probe_wireless_link_state): don't lock the scan mutex here
but let link_to_specific_ap() do the locking where it needs
Patch from Bill Moss:
* src/NetworkManagerSystem.c
- Set MTU of VPN devices to 1412
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@605 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Kill dhcpcd. We now use "dhcdbd", a dbus daemon that controls dhclient.
This means that NetworkManager shouldn't have DHCP issues anymore. It also
means you need dhcdbd, which you can get here (get the latest one):
http://people.redhat.com/jvdias/dhcdbd/
Technically NetworkManager can use any DHCP daemon that uses the same DBUS
interface as dhcdbd.
* Rewrite device activation to facilitate the new DHCP infrastructure and
future improvements. Its now "activation request" based, ie there is a single
activation request composed of the device, access point, and other info which
follows the entire activation process. There are 5 stages of the activation
process which correspond to:
1) Device preparation
2) Device configuration (bring it up, set ESSID/Key/etc)
3) IP Config Start (fire off DHCP if we're using it)
4) IP Config Get (grab config from DHCP or static config files)
5) IP Config Commit (set device's IP address, DNS, etc)
Note that there is no longer a "scanning" step, since the access point must
be known _before_ activation starts. If the access point drops out or does
not exist for some reason, the entire activation process fails and must be
restarted for a different access point or device.
Patch from Bill Moss:
* gnome/applet/applet.c
- Fix type of vpn_failure dialog -> vpn_banner dialog
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@597 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Peter Jones:
* Remove usage of varargs to fix crashes on PPC (RH #154336)
Patch from Bill Moss:
* src/NetworkManagerSystem.c
- Fix checking of return value from ioctl()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@592 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Initial VPN Support
- supports 'vpnc'
- reworks device IP configuration, backend files have changed and will need
to be updated for all distributions. I will try to do what I can for
them, but I cannot test them.
- Move named directory to src/named-manager
- Make backends directory self-contained
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@571 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Add debug code for socket/file descriptor leaks. We register every socket
that we open (except for stuff in dhcpcd/) for tracking, and print out the
list of sockets that we forgot to close on shutdown. This also consolidates
about 4 places where we opened sockets into 1 function in NetworkManagerUtils.c
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@559 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- (nmwa_about_cb): Add some more contributors
- (nmwa_update_state): show the applet when there's no connection
- Enable the "Stop/Resume all wireless devices" option in the
context menu
- New "no connection" icon
* src/NetworkManager.c
- (nm_poll_and_update_wireless_link_state): don't do anything if
wireless is disabled or we're asleep
* src/NetworkManagerDHCP.c
- Remove trailing "\n" on debug messages
* src/NetworkManagerDbus.c
- (nm_dbus_network_status_from_data): new state "asleep"
* src/NetworkManagerDevice.c
- Merge most of Peter Jones' "completion" patch that greatly reduces
latency and wait times for most operations
- (nm_device_wireless_scan): Don't scan when asleep
* src/NetworkManagerPolicy.c
- (nm_policy_get_best_device): return no device when asleep
- (nm_policy_allowed_ap_list_update): From Bill Moss: merge properties
for all wireless devices on update, not just active device
* src/NetworkManagerUtils.c
- Merge Peter Jones' "completion" patch
* src/nm-dbus-nm.c
- (nm_dbus_nm_set_wireless_enabled): bring down wireless devices when
we're told to disable them
- (nm_dbus_nm_sleep, nm_dbus_nm_wake): new functions for sleep/wake
* utils/nm-utils.h
- New variants of the warn/info/error/debug print functions that can take
variables rather than static strings
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@510 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fourth (probably working) cut at porting to
dbus 0.30 api and new hal. This cut adds
some new logging macros to make debugging
easier.
* dispatcher-daemon/NetworkManagerDispatcher.c:
* info-daemon/NetworkmanagerInfo.c:
* info-daemon/NetworkManagerInfoPassphraseDialog.c:
* info-daemon/NetworkManagerInfoVPN.c:
* src/NetworkManager.c:
* src/NetworkManagerAP.c:
* src/NetworkManagerAPList.c:
* src/NetworkManagerDHCP.c:
* src/NetworkManagerDbus.c:
* src/NetworkManagerDevice.c:
* src/NetworkManagerPolicy.c:
* src/NetworkManagerSystem.c:
* src/NetworkManagerUtils.c:
* src/NetworkManagerWireless.c:
* src/autoip.c:
* src/nm-dbus-nm.c:
* src/backends/NetworkManagerDebian.c:
* src/backends/NetworkManagerGentoo.c:
* src/backends/NetworkManagerRedHat.c:
* src/backends/NetworkManagerSlackware.c:
use new logging macros.
* dispatcher-daemon/NetworkManagerDispatcher.c:
(nmd_dbus_filter): s/dbus_free/g_free/
* info-daemon/Makefile.am: link in utils library.
* info-daemon/NetworkmanagerInfo.c: use new logging
macros.
(nmi_dbus_get_network): don't assume enumerations
are 32-bit.
(nmi_dbus_nmi_message_handler): don't free what
doesn't belong to us.
* libnm_glib/libnm_glib.c:
(libnm_glib_get_nm_status):
(libnm_glib_init): don't free what doesn't
belong to us.
(libnm_glib_dbus): strdup result, so it doesn't get
lost when message is unref'd.
* panel-applet/NMWirelessAppletDbus.c:
(nmwa_dbus_update_devices): s/dbus_free/g_free/
* src/NetworkManager.c:
(nm_monitor_wired_link_state): request initial status
dump of all cards when we start up, instead of relying
on /sys/.../carrier.
(nm_info_handler), (nm_set_up_log_handlers):
log handlers to specify what syslog priorites
the logging macros default to.
* src/NetworkManagerAPList.c:
(nm_ap_list_populate_from_nmi):
s/dbus_free_string_array/g_strfreev/
* src/NetworkManagerDbus.c:
(nm_dbus_get_network_object):
validate d-bus message argument types.
Advance message iterator after reading argument,
prepend instead of append to GSList.
* src/NetworkManagerDevice.c:
(nm_device_probe_wired_link_status):
remove redundant /sys in /sys path. remove wrong
contents == NULL means has carrier assumption.
* src/nm-netlink-monitor.c
(nm_netlink_monitor_request_status): implement
function to ask kernel to dump interface link
status over netlink socket.
* test/*.c: s/dbus_free/g_free/
* utils/nm-utils.h:
(nm_print_backtrace): new macro to print backtrace.
(nm_get_timestamp): new macro to get sub-second precise
unix timestamp.
(nm_info), (nm_debug), (nm_warning), (nm_error):
new logging functions. nm_info just prints,
nm_debug includes timestamp and function,
nm_warning includes function, nm_error includes
backtrace and sigtrap.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@497 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Rework the DHCP client code to be much less chatty when
it receives non-DHCP UDP packets during the DHCP run
(reported by and preliminary patches from Bill Moss)
* Move wireless scanning to a separate thread. This thread forwards the
results to the main thread when done where they are integrated into
the device's access point lists. This keeps the main thread (which
does all the DBUS communication) from being blocked for long periods
of time by wireless scanning.
* Make state modification an idle routine in the main loop, and trigger
state changes rather than polling for them.
* src/backends/NetworkManagerGentoo.c
- Fix up invalid C90 code (reported by Christoph Ruessler)
* src/NetworkManagerDevice.c
- Revert IPv6 patch for wired devices from 2004-12-22 for
router advertisements, causing problems and infinite loop
during "best" device determination due to link going up/down
(reported by Bill Moss)
Apply patch from Peter Jones
* src/NetworkManagerDevice.c
- Shortcut for link-checking for ipw2x00 cards
- Split out association check into separate routine
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@360 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c (nm_data_new): Initialize named.
Also, set up a signal handler for SIGINT/SIGTERM, and exit
the mainloop when these signals are received.
(nm_data_free): Unref named.
(sigterm_handler, sigterm_pipe_handler): New functions for
exiting mainloop.
* src/NetworkManagerMain.h (NMData): Add signal handling and
nameserver bits.
* src/NetworkManager.c (nm_device_unref): Quit device mainloop on
unref.
* src/NetworkManagerDHCP.c (set_nameservers): New function;
set nameservers from DHCP response data.
(set_domain_search): Set domain search from DHCP response.
(nm_device_dhcp_configure): Invoke them.
* src/NetworkManagerSystem.c
(nm_system_device_update_resolv_conf): Delete. Deleting
code is totally sweet.
* src/Makefile.am (NetworkManager_LDADD): Add libnamed.
* named/nm-named-manager.h, named/nm-named-manager.c: New files;
implements an object which controls a nameserver. Currently
uses bind 9.
* configure.in: Check for named.
* Makefile.am (SUBDIRS): Add named dir.
* named/named.conf: New template config file.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@352 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Ad Ad-Hoc networking mode support. In Ad-Hoc mode, we only try to get
link-local addresses instead of doing DHCP.
* In the panel applet, there's a new "Create new Wireless Network..." item
* The panel applet also sticks around now even if NetworkManager dies, but
it doesn't hide its icon when NM isn't around. Not hiding the icon is
a bug, I'll fix that later.
* We also don't use 'nscd' anymore in the RH backend, it was impeding name
lookups after a switch rather than actually doing them.
* Clean up some of those warnings in nm_ap_list_* functions
* Delay between scans changed to 15s instead of 10s
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@342 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tom Parker
* Add autoip/Link Local Addressing support when we fail to get a DHCP
address
* Longer pause after setting ESSID on cards that support a larger number
of channels to give the card time to find the right channel
* Add system hook to restart mDNSResponder (or whatever the local implementation
of Multicast DNS is) when we activate interfaces
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@341 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Major rework of the DHCP code, taking some cues from pump. We don't
write raw Ethernet packets anymore, which simplifies the code quite
a bit. The new code should be more robust, not hang in recvfrom()
as much, and generally work better. This also means that we need
to force HAL/dbus to use a created GMainContext rather than the
default context, since having the DHCP renew/rebind thread using
its own GMainContext seemed to give dbus a fit. There is also more
debugging information printed from the DHCP loop to help with future
problems.
* Also, if the DHCP server doesn't give us the "routersOnSubnet" option,
assume that the default gateway should be the DHCP server.
Patch from Matthew Schick <matt oss-institute org>
* src/backends/NetworkManagerGentoo.c
- Fix compilation error due to missing "ip4_broadcast"
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@336 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Major rework of link detection code. We now use DHCP
as part of the link detection which proves to be much more robust,
and also supports Open System authentication for wireless networks.
We no longer use external DHCP client programs. Instead, we use
our own DHCP client, based on substantially reworked bits of 'dhcpcd'
which was written by:
Yoichi Hariguchi <yoichi@fore.com>
Sergei Viznyuk <sv@phystech.com>
http://www.phystech.com/download/
It resides in the "dhcpcd" directory and was refactored into a general
purpose DHCP client library by me.
Also misc fixes (CPPFLAGS->AM_CPPFLAGS, move some stuff around),
move src/backends/NetworkManagerSystem.h -> src/NetworkManagerSystem.h
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@314 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
