When creating a parent dependent device it can have software device as
parent without an ifindex. In that case, it will fail on an ssertion on
parent being missing.
In order to avoid this, we are handling the situation similar to what we
do for VLAN devices. NetworkManager will raise different error and block
the autoconnection instead of asserting.
This solves the assert error for the following commands:
```
nmcli connection add type macvlan ifname mv1 con-name mv1+ macvlan.parent dummy0 mode vepa
nmcli connection add type dummy ifname dummy0 con-name dummy0+ autoconnect no
```
There were a few places where we did already this but there was one
place where we missed it, in nm-manager.c:do_sleep_wake(). Therefore,
the device end in DISCONNECTED state and did not assume the connection.
When the state is DISCONNECTED is being set from a
configuring/configured state we might want to always DECONFIGURE the
interface (ifindex, ip addresses, routes..) except if the
sys-iface-state is REMOVED in that case we would like to remove it.
This is the IPv6 equivalent of arp_ip_target option. It requires
arp_interval set and allow the user to specify up to 16 IPv6 addresses
as targets. By default, the list is empty.
The valid values for this option are 0 (off) and 1 (on). By default the
value is 1 (on). Please notice that this option is only compatible with
802.3AD mode.
The new arp_missed_max option valid range is 0-255 where value 0 means
not set. Please notice that this option is not compatible with 802.3AD,
balance-tlb and balance-alb modes.
When reloading the configuration and there is a global DNS
configuration without domains, NM crashes in global_dns_equal()
because `old->domains` and `new->domains` are both NULL. Fix that.
Thread 1 "NetworkManager" received signal SIGTRAP, Trace/breakpoint trap.
0 g_logv (log_domain=0x7fe81a2110be "GLib", log_level=G_LOG_LEVEL_CRITICAL, format=<optimized out>, args=<optimized out>) at ../glib/gmessages.c:1433
1 g_log (log_domain=<optimized out>, log_level=<optimized out>, format=<optimized out>) at ../glib/gmessages.c:1471
2 g_hash_table_size (hash_table=<optimized out>) at ../glib/ghash.c:2183
3 g_hash_table_size (hash_table=<optimized out>) at ../glib/ghash.c:2181
4 global_dns_equal (new=0xecc540, old=0xe618e0) at ../src/core/nm-config-data.c:1466
5 nm_config_data_diff (old_data=old_data@entry=0xe60020, new_data=new_data@entry=0xe606a0) at ../src/core/nm-config-data.c:1946
6 _set_config_data (self=0xe45810, new_data=0xe606a0, reload_flags=NM_CONFIG_CHANGE_CAUSE_SIGHUP) at ../src/core/nm-config.c:2923
7 nm_config_reload (self=0xe45810, reload_flags=NM_CONFIG_CHANGE_CAUSE_SIGHUP, emit_warnings=emit_warnings@entry=1) at ../src/core/nm-config.c:2875
8 nm_main_config_reload (signal=<optimized out>) at ../src/core/main.c:141
9 sighup_handler (user_data=<optimized out>) at ../src/core/main-utils.c:26
10 g_main_dispatch (context=0xe619e0) at ../glib/gmain.c:3444
11 g_main_context_dispatch (context=0xe619e0) at ../glib/gmain.c:4162
12 g_main_context_iterate.constprop.0 (context=0xe619e0, block=1, dispatch=1, self=<optimized out>) at ../glib/gmain.c:4238
13 g_main_loop_run (loop=0xe5e310) at ../glib/gmain.c:4438
14 main (argc=<optimized out>, argv=<optimized out>) at ../src/core/main.c:515
Fixes: 1f0d1d78d2 ('dns-manager: always apply options from [global-dns]')
In file included from ./src/libnm-std-aux/nm-default-std.h:102,
from ./src/libnm-glib-aux/nm-default-glib.h:11,
from ./src/libnm-glib-aux/nm-default-glib-i18n-prog.h:13,
from ./src/core/nm-default-daemon.h:11,
from src/core/nm-connectivity.c:8:
src/core/nm-connectivity.c: In function ‘nm_connectivity_check_start’:
./src/libnm-std-aux/nm-std-aux.h:180:12: error: ‘reason’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (expr) \
^
src/core/nm-connectivity.c:1055:29: note: ‘reason’ was declared here
const char *reason;
^~~~~~
The compiler may dislike this:
CC src/core/platform/tests/libNetworkManagerTest_la-test-common.lo
In function '_ip_address_add',
inlined from 'nmtstp_ip4_address_add' at ../src/core/platform/tests/test-common.c:1892:5:
../src/core/platform/tests/test-common.c:1807:63: error: array subscript 'NMIPAddr {aka const struct _NMIPAddr}[0]' is partly outside array bounds of 'in_addr_t[1]' {aka 'unsigned int[1]'} [-Werror=array-bounds]
1807 | peer_address->addr4,
| ~~~~~~~~~~~~^~~~~~~
../src/core/platform/tests/test-common.c: In function 'nmtstp_ip4_address_add':
../src/core/platform/tests/test-common.c:1886:36: note: object 'peer_address' of size 4
1886 | in_addr_t peer_address,
| ~~~~~~~~~~~~^~~~~~~~~~~~
...
Fixes: 06aafabf14 ('platform/test: add test adding IPv4 addresses that only differ by their peer-address')
The global configuration now can be valid when there are no global
domains defined. The dnsmasq backend must process it and then, if
there is no global default domain, also process the per-connection
settings.
Fixes: 1f0d1d78d2 ('dns-manager: always apply options from [global-dns]')
The link object is no longer valid after the cache gets updated in
nm_platform_link_change().
Fixes: e02fd76d9f ('platform: support changing link properties')
OVS interfaces are special: the kernel link is created only after the
device is attached to the ovs-port, and as with all ports this happens
during stage3(ip-config). That means that the link doesn't exist
during stage2(config); therefore, explicitly update link properties
once the link appears.
We need to set the ethtool and tc properties for assumed devices,
since they go through a normal activation. External devices should not
be touched by NM.
We are passing to the plugin only 'sett_flags', which is the bitmask
of flags to change and works together with 'sett_mask'; however,
plugins interpret that value as the new flags value. The result is
that if there is no change needed (0/0), the existing flags are lost.
Simple reproducer:
ip link add dummy1 type dummy
ip link set dummy1 up
ip addr add dev dummy1 fd01::12/64
sleep 1
# now, a external connection is created by NM
echo "BEFORE:"
cat /run/NetworkManager/system-connections/dummy1.nmconnection | grep "nm-generated\|volatile\|external"
# just add a new address to the interface to make it lose
# the external flag
ip addr add dev dummy1 172.25.42.1/24
sleep 1
echo "AFTER:"
cat /run/NetworkManager/system-connections/dummy1.nmconnection | grep "nm-generated\|volatile\|external"
Output:
BEFORE:
nm-generated=true
volatile=true
external=true
AFTER:
Fixes: d35d3c468a ('settings: rework tracking settings connections and settings plugins')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1548
Autoconnect retries are not being tracked by connection anymore. Now it
is tracked per Device x Connection. In addition, autoconnect might be
blocked for the connection due to no secrets or user requested.
All the properties tracking the retries and blocked time were move to
DevConData and the functions to manipulate them aswell. In NMPolicy the
logic didn't change very much. Instead of looking into the connection
when the device failed activation it looks for DevConData.
This setting allows the user to remove the local route rule that is
autogenerated for both IPv4 and IPv6. By default, NetworkManager won't
touch the local route rule.
A tentative IPv6 address can still fail DAD, so don't use it to
resolve the hostname via DNS. Furthermore, tentative addresses can't
be used to contact the nameserver and so the resolution will fail if
there is no other valid IPv6 address. Wait that the address becomes
non-tentative.
Currently the only way to return an error code from the daemon helper
is via the process exit code, but that is not enough to fully describe
an error from getaddrinfo(); in fact, the function returns a EAI_*
error code and when the value is EAI_SYSTEM, the error code is
returned in errno.
At the moment, any messages printed to stderr by the helper goes to NM
stderr; instead, we want to capture it and pass it through the logging
mechanism of NM, so that it can be filtered according to level and
domain.
Improve logging:
- log only when something changes
- print the new resolver state, instead of the old one
- rename state "in-progress" to "started"
- log when the resolver state is reset due to DNS changes
We already get the IAID from the dhclient environment. This is actually
rather useful, because dhclient plugin does not support setting the
value (that is, what we request in "config.v6.iaid" is not actually
used). Already previously, was the IAID for dhclient present in the
lease information. Now also normalize/verify it.
Expose the used IAID also with the internal (systemd) plugin. There we
explicitly set the IAID and know it.
Our lease is tracked in a plain string dictionary. For dhclient plugin
and similar, the keys are received via the environment, they are thus
unlimited. For the internal plugins they are known at compile time and
static strings. We thus sometimes need to clone the string, and
sometimes not.
Unfortunately, we cannot ask the GHashTable whether it has a free
function for the key, so we need to explicitly tell it. Add a parameter
for that.
There should be one function for parsing the string. Use it everywhere.
Also, because we will accept specifying the IAID as hex string so the
same parsing code should be used everywhere.
When a software device is deactivated, normally we schedule a idle
task to unrealize the device (delete_on_deactivate). However, if a new
activation is enqueued on the same device (and that implies that the
new profile is compatible with the device), then the idle task is not
scheduled and the device will normally transition to the different
states (disconnected, prepare, config, etc.).
For ovs-interfaces, we remove the db entry on disconnect and that
makes the link go away; however, we don't clear the hw_addr* fields of
the device struct.
When the new link appears, we try to set the new cloned MAC but the
stale hw_addr field indicates that it's already set. Avoid this
problem by updating the address as soon as the link appears.
https://bugzilla.redhat.com/show_bug.cgi?id=2168477https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1532
- Only consider preferred context of "internet" type. There can be
multiple preferred contexts of multiple types, and we care about
"internet" type only.
- Don't check for "internet+mms" type. It turns out that "internet+mms"
isn't a thing in oFono, and is used to represent "internet" context
with MMSC in the lomiri-system-setting's UI only.
Fixes: 9fc72bf75d ('wwan/ofono: create connections based on available contexts')
Bug-UBports: https://gitlab.com/ubports/development/core/packaging/network-manager/-/issues/3
Trigger a dispatcher event when a connection is reapplied on a NM device.
Some devices such as phones have already a DHCP client running for accepting
connections when they are plugged into USB to transfer data over SSH.
When NetworkManager switches the connection IP method to shared,
it spawns a dnsmasq process to handle DHCP and DNS for that connection.
However, a dispatcher event is needed to disable the external DHCP server
for these USB connections as NetworkManager's dnsmasq handles them now.
Moreover, when the connection method is switched to a different mode,
the external DHCP server needs to be spawned again to make sure that
SSH connections are still possible to the device.
To achieve this, add a new NetworkManager Dispatcher event
'reapply' which is triggered when a connection is reapplied on a NM
device. This way, a dispatcher script can handle the case above by
inspecting the IP method in the dispatcher script.
