Change the dhcp-timeout property in NMSettingIPConfig to int type for
consistency with the dad-timeout property. For dad-timeout -1 means
"use default value", while for dhcp-timeout probably we will never use
negative values, but it seems more correct to use the same type for
the two properties.
Some drivers (or things outside NM like 'powertop') may turn powersave
on, so don't touch it unless explicitly configured by user.
To achieve this, add new 'default' and 'ignore' options; the former
can be used to fall back to a globally configured setting, while the
latter tells NM not to touch the current setting.
When 'default' is specified, a missing global default configuration is
equivalent to 'ignore'.
It is possible to enable Wi-Fi power saving for all connections by
dropping a file in /etc/NetworkManager/conf.d with the following
content:
[connection]
wifi.powersave=3
https://bugzilla.gnome.org/show_bug.cgi?id=760125
Get rid of NM_UNMANAGED_DEFAULT and refine the interaction between
unmanaged flags, device state and managed property.
Previously, the NM_UNMANAGED_DEFAULT was special in that a device was
still considered managed if it had solely the NM_UNMANAGED_DEFAULT flag
set and its state was managed. Thus, whether the device (state) was managed,
depended on the device state too.
Now, a device is considered managed (or unmanaged) based on the unmanaged
flags and realization state alone. At the same time, the device state
directly corresponds to the managed property of the device. Of course,
while changing the unmanaged flags, that invariant is shortly violated
until the state transistion is complete.
Introduce more unmanaged flags whereas some of them are non-authorative.
For example, the EXTERNAL_DOWN flag has only effect as long as the user
didn't explicitly manage the device (NM_UNMANAGED_USER_EXPLICIT). In other
words, certain flags can render other flags ineffective. Whether the device
is considered managed depends on the flags but also at the explicitly unset flags.
In a way, this is similar to previous where NM_UNMANAGED_DEFAULT was ignored
(if no other flags were present).
Also, previously a device that was NM_UNMANAGED_DEFAULT and in disconnected
state would transition back to unmanaged. No longer do that. Once a device is
managed, it stays managed as long as the flags indicate it should be managed.
However, the user can also modify the unmanaged flags via the D-Bus API.
Also get rid or nm_device_finish_init(). That was previously called
by NMManager after add_device(). As we now realize devices (possibly
multiple times) this should be handled during realization.
https://bugzilla.gnome.org/show_bug.cgi?id=746566
- "gsystem-local-alloc.h" and <gio/gio.h> are already included via
"nm-default.h". No need to include them separately.
- include "nm-macros-internal.h" via "nm-default.h" and drop all
explict includes.
- in the modified files, ensure that we always include "config.h"
and "nm-default.h" first. As second, include the header file
for the current source file (if applicable). Then follow external
includes and finally internal nm includes.
- include nm headers inside source code files with quotes
- internal header files don't need to include default headers.
They can savely assume that "nm-default.h" is already included
and with it glib, nm-glib.h, nm-macros-internal.h, etc.
NetworkManager does not allow default routes to be specified
as normal routes. They must be ignored. Especially, iproute2
which reads the ifcfg files in initscripts, does not allow
to specify a prefix length "default/x" except for "default/0".
https://bugzilla.gnome.org/show_bug.cgi?id=761631
The @read_wired_static array is passed on as test function. But defining
it in a local scope is strictly speaking not correct because the lifetime
of the array ends before the test run. Move it to the outer scope, which
exists during the test runs.
Since commit bb868770, setting a gateway of "0.0.0.0"
or "::" in NMSettingIPConfig means to set the gateway
to NULL. There is indeed no difference between an unset
gateway and an any gateway. This change was done to have
a consistent behavior in NMSettingIPConfig.
Fixes: bb86877031
Two of these raised Coverity's eyebrows.
CID 59389 (#1 of 1): Insecure temporary file (SECURE_TEMP)
5. secure_temp: Calling mkstemp without securely setting umask first.
CID 59388 (#1 of 1): Insecure temporary file (SECURE_TEMP)
1. secure_temp: Calling mkstemp without securely setting umask first.
Last one raised mine.
When a connection is edited and saved, there's a small window during which and
unprivileged authenticated local user can read out connection secrets (e.g. a
VPN or Wi-Fi password). The security impact is perhaps of low severity as
there's no way to force another user to save their connection.
CID 59382 (#1 of 1): Dereference null return value (NULL_RETURNS)
10. dereference: Dereferencing a pointer that might be null value
when calling strcmp.
Not exactly true, since we ruled out the posibility earlier; but
we could still get rid of a couple of strcmps.
We inconsistently use gulong,guint,int types to store signal handler
id, but the type returned by g_signal_connect() is a gulong.
This has no practical consequences because a int/guint is enough to
store the value, however it is better to use a consistent type, also
because nm_clear_g_signal_handler() accepts a pointer to the signal id
and thus it must be always called with the same pointer type.
Previously, we directly passed the @in_ifcfg path to find_by_path().
That means, @in_ifcfg must be the path to the base "ifcfg-" file,
not an alias or route file.
Add an additional pre-check, that the provided file name is really a
ifcfg base file.
This results in a more detailed error message when calling
GetIfcfgDetails not on the ifcfg base file. It's not that previously
the lookup would have succeeded.
Up to now, the "include" directory contained (only) header files that were
used project-wide by libs, core, clients, et al.
Since the directory now also contains a non-header file, the "include"
name is misleading. Instead of adding yet another directory that is
project-wide, with non-header-only content, rename the "include"
directory to "shared".
This property is TRUE for devices that exist either as a kernel device
or are backed by some other resource (eg, ModemManager object, Bluez
device, etc). It will eventually be FALSE for software devices that
are not yet instantiated.
This enum was unused and meaningless because the platform signals
are emitted as a consequence of netlink messages. It is not clear
whether a netlink message was received due to an external event
or an internal action.
Can't just substitute sysconfdir into a header file -- it's meant to be
expanded in a Makefile. Otherwise, unexpanded ${prefix} will end up in a
header file.
We do that for NMCONFDIR already, let's use it here too.
Fixes: 2144457fab
These properties limit whether the connection applies to a certain WWAN modem
based on the modem's device ID or SIM ID (as reported by the WWAN management
service), or through the MCC/MNC ID of the operator that issued the SIM card.
Old init-scripts that did not yet understand this key will have
mac-address-randomization explicitly disabled. This is to ensure
that old connections don't change behavior.
Thus, the writer must always write the value explicitly.
Downside is, if somebody creates a quick ifcfg-file, the feature
is disabled by default.
NMExportedObject now derives from GDBusObjectSkeleton, which is what
GDBusObjectManagerServer wants. The main GDBusConnection and each
private server connection now gets a new GDBusObjectManagerServer,
and exported objects are registered with that instead of individually
exporting each GDBusInterfaceSkeleton.
Previously exported objects were not referenced by the BusManager,
but instead removed from the exports hash via weak references. The
GDBusObjectManagerServer instead references exported objects, which
can make them live much longer than they did before.
Co-Authored-By: Thomas Haller <thaller@redhat.com>
Prevsiouly, the ifcfg-rh service and the regular NetworkManager
were both exported on the same D-Bus connection. That had the
effect, that on both services ("com.redhat.ifcfgrh1" and
"org.freedesktop.NetworkManager") all objects were visible.
This is also problematic later when we use GDBusObjectManager
for the org.freedesktop.NetworkManager service.
Export the ifcfg service on a separate bus connection.
One downside is, that we don't bother exporting the service
on the private socket and thus the service is not available
without D-Bus daemon.
Also, if the bus disconnects, we don't retry or recover. Instead
the D-Bus service is dead until restart.
Previously most objects were implicitly unexported when they were
destroyed, but since refcounts may make the object live longer than
intended, we should explicitly unexport them when they should no
longer be present on the bus.
This means we can assume that objects will always be un-exported
already when they are destroyed, *except* when quitting where most
objects will live until exit because NM leaves interfaces up and
running on quit.
If the current agent disappears and we already triggered the permission check
for it then the callback for that permission check will fire after we
progressed to the next agent:
# nmcli c --wait 0 up vpn
When another agent, such as GNOME Shell is registered, then get_done_cb() for
the nmcli will be called after we started the permission check for GNOME Shell,
resulting in an assertion fail:
get_done_cb: assertion 'call_id == parent->current_call_id' failed
Previsously, _LOGT() could be disabled at compile time. Thus it
was different then the other macros _LOGD(), _LOGI(), etc.
OTOH, _LOGt() was the macro that always was compiled in.
Swap the name of the macros. Now the upper-case macros are always
enabled, while the lower-case macro _LOGt() is enabled depending
on compile configuration.
Take a missing value in keyfile/ifcfg-rh as EUI-64 to keep the compatibility
with the old conneciton. Nevertheless, the new connections should default to
the RFC7217 addresses.
