* refactor NMDevice into a GObject-based framework with separate
objects for wired and wireless. The following files are no
longer used but should stick around for a bit so we don't
loose code through the cracks:
NetworkManagerDevice.c
NetworkManagerDevice.h
NetworkManagerWireless.c
NetworkManagerWireless.h
The intent here is to allow each device type to manage its own
connection & activation life-cycle, ie to allow wireless devices
to interface with wpa_supplicant, etc. There's a fair bit of
encapsulation breakage right now that should gradually get pulled
back into each device, along with things like periodic property
updates and link probing.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1244 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Convert NETWORK_MODE_* constants to IW_MODE_*
* Make all the get_mode/set_mode functions take and return 'int'
* Convert D-BUS calls that pass mode to DBUS_TYPE_INT32 rather than UINT32
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1142 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Replace the "driver support level" stuff with capabilities. The
capability field is a bitfield that is more flexible than the
old driver support level thing. It's mostly so we can easily
figure out what supports WPA and what doesn't, but should be
quite useful later.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1007 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-dbus-device.c: Use iw_ether_ntop(), not ether_ntoa_r(), to
convert an ether_addr structure's MAC into a string, because the
latter will drop leading zero's and uses lower-case, e.g. 7:3b:4
versus 07:3B:04, while the former will not.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@993 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-dbus-devices.c, gnome/applet/applet.c,
gnome/applet/nm-device.c, gnome/applet/nm-device.h,
gnome/applet/wireless-applet.glade, src/nm-dbus-device.c: Display
default route in the 'Connection Information' dialog, send primary
and secondary name servers in in "getProperties" DBUS method, add
network_device_{get,set}_{primary,secondary}_dns(), The primary and
secondary domain name servers are crucial pieces of information
that a user might need in debugging a network problem.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@991 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-dbus-devices.c, gnome/applet/applet.c,
gnome/applet/nm-device.c, gnome/applet/nm-device.h,
gnome/applet/wireless-applet.glade, src/nm-dbus-device.c: Display
default route in the 'Connection Information' dialog, send default
route in "getProperties" DBUS method, add network_device_set_route(),
and network_device_get_route(). The Gateway is a crucial piece of
connection-related information that a user might need in debugging a
network problem.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@990 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-dbus-device.c: Don't assert when getting
addresses of a not yet connected interface.
* gnome/applet/applet.c: Free icons if loading fails.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@967 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-dbus-devices.c:
* gnome/applet/applet.c:
* gnome/applet/nm-device.c:
* gnome/applet/nm-device.h:
* src/NetworkManagerUtils.c:
* src/NetworkManagerUtils.h:
* src/nm-dbus-device.c:
I've got a fever, and the only cure for it is less ioctl.
Make NM push IP data rather than make the applet open a socket
to the device.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@960 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-dbus-devices.c:
* gnome/applet/applet-dbus-devices.h:
* gnome/applet/applet-dbus.c:
* src/NetworkManagerDbus.c:
* src/NetworkManagerDbus.h:
* src/NetworkManagerDevice.c:
* src/nm-dbus-device.c:
Make NM push updates about active device strength when it changes,
rather than having the applet poll every 2s.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@940 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Expose activation stages to NetworkManager clients, like the applet
* Add Diana's progress icons to the applet, cued off NM activation stage
* Use more descriptive tooltips, cued off NM activation stage
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@611 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Kill dhcpcd. We now use "dhcdbd", a dbus daemon that controls dhclient.
This means that NetworkManager shouldn't have DHCP issues anymore. It also
means you need dhcdbd, which you can get here (get the latest one):
http://people.redhat.com/jvdias/dhcdbd/
Technically NetworkManager can use any DHCP daemon that uses the same DBUS
interface as dhcdbd.
* Rewrite device activation to facilitate the new DHCP infrastructure and
future improvements. Its now "activation request" based, ie there is a single
activation request composed of the device, access point, and other info which
follows the entire activation process. There are 5 stages of the activation
process which correspond to:
1) Device preparation
2) Device configuration (bring it up, set ESSID/Key/etc)
3) IP Config Start (fire off DHCP if we're using it)
4) IP Config Get (grab config from DHCP or static config files)
5) IP Config Commit (set device's IP address, DNS, etc)
Note that there is no longer a "scanning" step, since the access point must
be known _before_ activation starts. If the access point drops out or does
not exist for some reason, the entire activation process fails and must be
restarted for a different access point or device.
Patch from Bill Moss:
* gnome/applet/applet.c
- Fix type of vpn_failure dialog -> vpn_banner dialog
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@597 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Merge the applet and the info-daemon, and move the converged
applet under gnome/applet
* Move libnm_glib to gnome/libnm_glib
* Convert most dbus calls between the applet, info-daemon, and NM
into async calls
* Fix a few things valgrind noticed
* Make NM broadcast state more reliably
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@586 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessAppletDbus.c
- (nmwa_dbus_call_nm_method): remove some commented code
* src/NetworkManagerAPList.[ch]
- (nm_ap_list_remove_ap_by_essid): new function
* src/NetworkManagerDevice.c
- (nm_device_wireless_force_use): remove access points from the ignore list
when the user forces them
* src/nm-dbus-device.c
- (nm_dbus_device_get_active_network): fix up escaping of object paths
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@557 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Tighten up handling of wireless devices that don't support wireless
scanning (ie, Orinoco). Due to restructuring of code, these devices
hadn't been doing pseudo-scanning for a while either and would just
spin waiting for an access point. They are now manual devices where
the user must choose the access point from the menu every time. All
"allowed" access points are listed in the applet's menu regardless
of whether or not they can be seen by the card, since it can't scan
anyway.
* src/NetworkManager.c
- (nm_wireless_link_state_handle): new function, but only update
the "best" ap for non-scanning devices when its not activating,
and when no device is being forced on the card
- (nm_link_state_monitor): split wireless link state handling out
into separate function
* src/NetworkManagerDevice.c
- (nm_device_copy_allowed_to_dev_list): new function
- (nm_device_new): populate non-scanning cards' AP lists with
access points from the "allowed" list
- (nm_device_new): don't start a scanning timeout for devices that
can't scan
- (nm_device_activation_schedule_finish): new parameter, should be
the AP that failed to be connected to, pass it on to the
activation finish function in NetworkManagerPolicy.c
- (nm_device_activate_wireless): don't ever try to get a new AP
for non-scanning devices, just fail. The user must choose
a new access point manually.
- (nm_device_activate): grab the AP that failed connection and
pass it on
- (nm_device_update_best_ap): Clear the best AP if we don't have
a link to it, user must manually choose a new one
- (nm_device_do_pseudo_scan): remove function
- (nm_device_wireless_process_scan_results): remove bits for non-
scanning cards since they never get here
- (nm_device_wireless_scan): remove bits for non-scanning devices,
and fake the scan list for test devices a bit earlier
* src/NetworkManagerPolicy.c
- (nm_policy_activation_finish): use the failed_ap that we get
passed rather than getting the best_ap from the card, which
may have changed since we were scheduled
- (nm_policy_allowed_ap_list_update): for non-scanning devices,
update their scan list directly from the allowed list when
we get updates to the allowed list from NetworkManagerInfo
* src/NetworkManagerPolicy.h
- New member for failed access point in NMActivationResult
-------------------------------------
Driver Notification patch: notifies the user when their driver
sucks. Gives them the option to ignore further insertions
of the card that has the sucky driver.
* NetworkManager.h
- Remove the SEMI_SUPPORTED member from the NMDriverSupportLevel
enum and replace it with NO_CARRIER_DETECT and
NO_WIRELESS_SCAN
* panel-applet/NMWirelessApplet.[ch]
- Merge essid.glade -> wireless-applet.glade
- Implement the "Your driver sucks" notification dialog
* panel-applet/NMWirelessAppletDbus.c
- Change stuff from getSupportsCarrierDetect->getDriverSupportLevel
- Grab hardware address for each device from NM too
- Check whether the driver for each device sucks or not whenever
a new device is noticed
* panel-applet/NMWirelessAppletOtherNetworkDialog.c
- Deal with stuff being in wireless-applet.glade now rather than essid.glade
* src/NetworkManager.c
- Fix a double-unref on device removal
* src/NetworkManagerUtils.c
- Set appropriate driver support level on a device that doesn't
support scanning or carrier detection
* src/nm-dbus-device.c
- New "getHWAddress" dbus method on devices
- getSupportsCarrierDetect -> getDriverSupportLevel
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@534 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Third (unfinished, partially working) cut at porting to
dbus 0.30 api and new hal.
* info-daemon/NetworkManagerInfoDbus.c:
don't free null arrays.
* panel-applet/NMWirelessAppletDbus.c:
* src/nm-dbus-device.c:
* src/nm-dbus-net.c:
* src/NetworkManagerDbus.c: more
STRING -> OBJECT_PATH fun
* src/NetworkManagerDevice.c:
* src/NetworkManagerDevice.h:
(rename nm_device_get_link_active): rename to
nm_device_has_active_link
(nm_device_wireless_link_active): rename to
nm_device_probe_wireless_link_state
(nm_device_wired_link_active): rename to
nm_device_probe_wired_link_state. Rewrite to
use carrier file since hal doesn't maintain
link state anymore.
(nm_device_update_link_active): rename to
nm_device_update_link_state
* src/NetworkManagerPolicy.c
(nm_policy_activation_finish): check for NULL
MAC address.
* src/Makefile.am:
* src/NetworkManagerMain.h:
* src/NetworkManager.c:
* src/nm-netlink-monitor.c:
* src/nm-netlink-monitor.h: New class to support
monitoring wired ethernet link status, since HAL
doesn't export that information anymore.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@495 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- (dhcp_init): only print out client ID and class ID if they are specified
* src/NetworkManagerDbus.[ch]
src/nm-dbus-nm.[ch]
src/nm-dbus-device.[ch]
src/nm-dbus-net.[ch]
- Move NM, Device, and Net functions to separate files and use the
dbus method list stuff in NetworkManagerDbusUtils.c to do
method dispatching
* src/NetworkManagerDbusUtils.c
- Add new validate_method called before each dispatch (if present)
that can validate the method call
* src/NetworkManagerWireless.c
- (nm_wireless_qual_to_percent): Fix misplaced "!" that caused signal
levels never to be evaluated
Patch from j@bootlab.org
* src/NetworkManagerDevice.c
- Add typedef for "u64"
* src/backends/NetworkManagerDebian.c
- Copy in Dave Woodhouse's fixes for IPv6
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@438 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
