Fix address handling as a result of DHCP rebind/renew/reboot.
* src/NetworkManagerSystem.c
- (check_one_address): delete an address if it doesn't match a given
one for the same interface
- (nm_system_device_set_from_ip4_config): don't flush the default route,
be smarter about flushing addresses (only flush ones that don't
match the one we're about to apply)
* src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerSuSE.c
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerGentoo.c
- (nm_system_delete_default_route): remove
* src/backends/NetworkManagerGeneric.c
src/backends/NetworkManagerGeneric.h
- (nm_generic_enable_loopback): fix the loopback device label
- (nm_generic_delete_default_route): remove; no longer used
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3424 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
First pass of multiple active device support. Expect bugs.
* src/nm-ip4-config.c
src/nm-ip4-config.h
- (nm_ip4_config_get_secondary, nm_ip4_config_set_secondary): remove;
there are better ways to do this in the named manager
* src/nm-device.c
src/nm-device.h
- (nm_device_can_activate): return whether the device can activate a
connection right now; taking into account things like carrier state
and rfkill state
- (nm_device_get_best_auto_connection): renamed from
nm_device_get_best_connection
- (real_act_stage4_get_ip4_config): MTU stuff is now handled in the
device subclasses themselves, so that each device can override the
MTU from it's NMSetting subclass if needed
- (nm_device_set_ip4_config): set MTU when setting up routes and stuff
in NetworkManagerSystem.c, not here
* src/named-manager/nm-named-manager.c
src/named-manager/nm-named-manager.h
- (nm_named_manager_name_owner_changed,
nm_named_manager_dbus_connection_changed): fix for changes to
rewrite_resolv_conf()
- (compute_nameservers): don't need the NMNamedManager at all, remove
from parameter list
- (merge_one_ip4_config): new function; merge ip4 configs together
- (rewrite_resolv_conf): write out resolv.conf from all the stored
ip4 configs; the VPN config takes precedence, then the best
device config, then the rest of the configs
- (get_domain_for_config): take the NMNamedManager as an argument
to check whether the config is the VPN config
- (add_ip4_config_to_named): fixups for removal of the 'secondary'
attribute from ip4 configs
- (add_all_ip4_configs_to_named): add all the configs in priority order
- (remove_ip4_config_from_named): fix for changes to
get_domain_for_config()
- (nm_named_manager_add_ip4_config): assign the config to the right slot
based on its type; callers must pass in the type now
- (get_last_default_domain): remove, unused
- (nm_named_manager_remove_ip4_config): handle config slots correctly
* src/nm-device-802-11-wireless.c
- (real_can_activate): new function
- (real_get_best_auto_connection): renamed from real_get_best_connection
- (real_act_stage4_get_ip4_config): handle MTU override
* src/nm-device-802-3-ethernet.c
- (real_can_activate): new function
- (real_get_best_auto_connection): renamed from real_get_best_connection
- (real_act_stage4_get_ip4_config): new function; handle MTU override
* src/vpn-manager/nm-vpn-connection.c
- (nm_vpn_connection_ip4_config_get): don't need to set the 'secondary'
attribute on the ip4 config
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): remove
- (nm_policy_device_change_check): remove
- (update_default_route): new function; set the default route via
the specified device
- (get_device_priority): new function; return the priority number of
a device type WRT which one should have the default route. Order is
(highest to lowest) wired, wireless, GSM, CDMA.
- (update_routing_and_dns): new function; determine which device should
have the default route, then update the routing table and DNS
- (maybe_auto_activate_device): new function; if a device is now
available for activation, find out what connection it would like to
activate and do it
- (schedule_activate_check): new function; if a device can be activated
now, schedule the activation. Each device may have only one
pending activation at a given time.
- (device_state_changed): if activation was canceled, try again,
possibly with another connection; if the device was activated,
update routing and DNS; if the device was deactivated, try again
with another connection
- (device_carrier_changed): if there is no carrier, deactivate the
device; otherwise schedule an activation check for the device
- (wireless_networks_changed): schedule an activation check for the
device
- (device_added): keep track of the signal handler IDs so they can
be removed when the device goes away
- (device_removed): remove any signal handlers that might be attached
to the device; update routing and DNS
- (schedule_activate_all): new function
- (connections_added, connection_added, connection_updated): when
connections change, schedule all devices for an activation check
- (connection_removed): when a device is deactivated because its
connection was removed, schedule another activation check for it
- (nm_policy_destroy): destroy pending activations and disconnect
all device signal handlers
* src/nm-manager.c
- (nm_manager_activate_device): if the device was already actived,
deactivate it
- (deactivate_old_device): remove
- (connection_added_default_handler, impl_manager_activate_device):
don't deactivate other devices when activating this one
* src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerFrugalware.c
src/backends/NetworkManagerPaldo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
src/backends/NetworkManagerArch.c
src/backends/NetworkManagerSuSE.c
src/backends/NetworkManagerDebian.c
- (nm_system_get_mtu): remove; MTU should be provided through the
distro's system settings service plugin instead
- (nm_system_device_add_default_route_via_device): remove
- (nm_system_device_add_default_route_via_device_with_iface): remove
- (nm_system_device_replace_default_route): new function; call
generic implementation
* src/backends/NetworkManagerGeneric.c
src/backends/NetworkManagerGeneric.h
- (nm_generic_device_add_default_route_via_device,
nm_generic_device_add_default_route_via_device_with_iface): remove
- (nm_generic_device_replace_default_route): replace the default route
with the given route via some gateway
* src/NetworkManagerSystem.c
src/NetworkManagerSystem.h
- (nm_system_device_set_from_ip4_config): let the policy handle updates
to routing and DNS; but set the MTU here
- (nm_system_vpn_device_set_from_ip4_config): set the route with the
ip_iface of the active device; use the standard MTU setting function
- (nm_system_set_mtu): remove
- (nm_system_device_set_mtu): consolidate MTU setting code in one place
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3391 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/ppp-manager/nm-ppp-manager.c
- (ip4_config_get): set peer address too
* src/ppp-manager/nm-pppd-plugin.c
- (nm_ip_up): try harder to get the peer's address
* src/NetworkManagerSystem.c
- (nm_system_device_set_from_ip4_config): if the IP4Config has a peer
address, use that too. Otherwise, some PPP connections won't work.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3260 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-netlink.c
src/NetworkManagerSystem.c
- (new_nl_handle): ensure that the same netlink pid is never chosen
twice (gnome.org #491047)
- Make more robust against allocation-related failures should they occur
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3156 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): Change the
arguments: This whole file shouldn't really know anything about
NMDevices, it
should deal only with device interfaces. Devices might have
different ifaces for
different stuff and this place shouldn't know anything about it.
* src/NetworkManagerPolicy.c: Get rid of leftover global
* variable global_policy.
(global_state_changed): Implement. In the current NM it's not
really important,
but will be required in the case of multiple active devices. (Or
even better,
if stuff like that gets moved out from NM).
* src/vpn-manager/nm-vpn-connection.c
* (connection_state_changed): Don't call
nm_system_device_set_from_ip4_config() directly, use
nm_device_set_ip4_config()
instead.
* src/nm-device.c: Add a ip_face protected member. It's used for
* 'multi-interface'
devices like serial devices (ttyS0 and ppp0 for example).
(nm_device_get_ip_iface): Implement. Default to the device iface
if ip_iface is not
set.
(nm_device_set_ip_iface): Implement.
(nm_device_activate_stage5_ip_config_commit): Move all the extra
actions that happen
after setting ip4_config from here ...
(nm_device_set_ip4_config): ... to here. The reason behind it is
that no other code
than this function should call
nm_system_device_set_from_ip4_config() because no
other code has enough information on which arguments to use. So
instead, other code
could just set the new ip4 config using this function and
everyone is happy.
* src/nm-umts-device.c: Store the pending ids so that we can
* remove pending actions
if we happen to get deactivated while something is pending.
(automatic_registration): Handle the response that indicates
pending network
registration and wait until the pending registration is done.
(real_deactivate_quickly): If there's a pending operation,
cancel it.
* src/nm-serial-device.c (ppp_ip4_config): Set the ip_iface when
* the iface is up ...
(real_deactivate_quickly): ... and remove it when it's down.
(nm_serial_device_get_reply): Return the timeout id so that the
callers can remove
it if needed.
(nm_serial_device_wait_for_reply): Ditto.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3141 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-umts-device.c (dial_done): Fix the typoes in warnings.
(get_network_done): Remove newline, nm_info() does it already.
(real_act_stage1_prepare): Turn the modem echo off.
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): In case of serial
device, set the route to the device interface. This is a hack.
* src/nm-serial-device.c (nm_serial_device_send_command_string):
* Only append carriage
return, no need for a new-line.
(ppp_ip4_config): Store the ip4 config to be set in the next
stage.
Change the device iface here (ugh).
(real_act_stage4_get_ip4_config): Implement.
(real_deactivate_quickly): Free the pending ip4 config if it's
still pending.
Restore the device iface.
* src/NetworkManagerPolicy.c (nm_policy_device_change_check): Do
* nothing if the active
device is not wired or wireless (eg, automatically upped)
device.
* src/ppp-manager/nm-ppp-manager.c (ip4_config_get): Don't make
* the config secondary,
it isn't.
(nm_ppp_manager_start): Don't let pppd to set the default route,
we want to do it.
* src/nm-hal-manager.c (get_creator): Make sure the device has
* required capability
before calling it's is_device_fn().
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3137 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Merge the beginnings of the new GSM card support.
* src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove
* the
ppp watch source before killing pppd - If this happens from
g_object_unref()
then the ppp manager is already destroyed by the time the watch
callback runs.
* src/nm-hal-manager.c: Add a device_type_name string to the
* device
creators, so that we can print a nice human readable string when
a
device is added.
* src/nm-umts-device.c (automatic_registration_get_network):
* Query
for the activated network, not much is done with the result
thought.
* src/nm-serial-device.c (nm_serial_device_get_reply):
* Implement.
(ppp_ip4_config): Change the device state to activated here for
now.
(real_check_connection): Make sure the connection includes ppp
setting.
* libnm-glib/nm-client.c (get_device): Handle umts devices.
* libnm-glib/Makefile.am: Add the new files to build.
* libnm-glib/nm-umts-device.c:
* libnm-glib/nm-umts-device.h: Implement.
2007-11-26 Tambet Ingo <tambet@gmail.com>
* src/nm-umts-device.c (automatic_registration_get_network): For
* now, dial
immediately, nm_serial_device_get_reply() isn't implemented
correctly yet.
* src/nm-serial-device.c (wait_for_reply_info_destroy): Don't
* try to remove
the timeout source - this function is only called when the
timeout source has
been removed.
(nm_serial_device_wait_for_reply): Allocate the duplicate
responses array
to be big enough to contain the terminating zero element as
well.
The timeout argument is meant to be in seconds now.
(real_deactivate_quickly): Implement.
* src/NetworkManager.conf: Allow root to own
"org.freedesktop.NetworkManager.PPP", deny it for everybody
else.
* libnm-util/nm-setting-umts.c: Network type and band properties
* are ints,
(not unsigned ints).
* libnm-util/nm-setting-serial.c (nm_setting_serial_class_init):
* Fix a
small issue with parity bounds - capital letters have lower
ascii codes
than lower case letters.
* libnm-util/nm-connection.c (register_default_settings):
* Register serial
and umts settings.
2007-11-22 Tambet Ingo <tambet@gmail.com>
Remove the "index" property from devices as not all device types
have this.
* include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove.
* src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove.
(wired_device_creator): Get the device interface from hal to
create the device.
(wireless_device_creator): Ditto.
* src/nm-device.c (nm_device_init): Remove the index member.
(constructor): Remove the checks for index property, make
interface property
a require constructor property.
Use the HAL udi for DBus path for devices.
(nm_device_get_index): Remove.
(set_property): Remove index handling.
(get_property): Ditto.
(nm_device_get_dbus_path): Remove.
* src/nm-device-interface.c (nm_device_interface_init): Remove
* the index
property.
* src/nm-device-802-3-ethernet.c
* (nm_device_802_3_ethernet_link_activated):
Access the device index through it's interface.
(nm_device_802_3_ethernet_link_deactivated): Ditto.
(nm_device_802_3_ethernet_new): Remove the useless argument
test_dev. Remove
index argument. Add interface argument.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new): Remove
the useless test_dev argument. Remove index argument. Add
interface arugment.
* src/NetworkManagerSystem.c
* (nm_system_device_set_from_ip4_config): Get the
device index through interface.
(nm_system_set_mtu): Ditto.
* introspection/nm-device.xml: Remove the "Index" property.
2007-11-21 Tambet Ingo <tambet@gmail.com>
* src/nm-serial-device.c:
* src/nm-serial-device.c:
* src/nm-umts-device.c:
* src/nm-umts-device.h: Implement.
* src/nm-hal-manager.c (nm_get_device_driver_name):
* libhal_free_string the string
allocated by libhal.
(modem_device_creator): Implement.
(register_built_in_creators): Register the modem creator.
* src/nm-device-802-11-wireless.c
* (nm_device_802_11_wireless_new):
Remove the unused test_dev argument.
* src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new):
* Ditto.
* src/Makefile.am: Add new files to build.
Link in ppp-manager.
* libnm-util/nm-setting-umts.c:
* libnm-util/nm-setting-umts.h:
* libnm-util/nm-setting-serial.c:
* libnm-util/nm-setting-serial.h: Implement.
* libnm-util/Makefile.am: Add new files to build.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Zdeněk Jurka <zdenek.jurka@jware.cz>
Support DHCP-provided static routes.
* src/nm-ip4-config.h
src/nm-ip4-config.c
- Add get/set functions for static routes
* src/dhcp-manager/nm-dhcp-manager.c
- (nm_dhcp_manager_get_ip4_config): extract static routes from the
DHCP response
* src/NetworkManagerSystem.c
- (nm_system_device_set_from_ip4_config): set any static routes on the
interface when applying the IP4Config
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3115 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerSystem.c
- (nm_system_vpn_device_set_from_ip4_config): clean up indentation;
and all address manipulation here should be happening on the
_VPN_ device, not the active device
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2905 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-glib/nm-vpn-plugin.c (nm_vpn_plugin_connect): Update the
* plugin activation
method.
(impl_vpn_plugin_connect): Convert properties hash to
NMConnection, activate, and
unreference the connection.
* introspection/nm-vpn-plugin.xml: Modify the 'Connect' method
* arguments: instead of
passing properties hash and routes string list, pass
NMConnection (in hashed form).
* src/vpn-manager/nm-vpn-connection.c
* (nm_vpn_connection_get_routes): Return routes
as GSList, no need to copy stuff around anymore.
(nm_vpn_connection_activate): Update the plugin activation
method.
* src/NetworkManagerSystem.c
* (nm_system_vpn_device_set_from_ip4_config): Convert
routes argument to GSList.
* vpn-daemons/vpnc/src/nm-vpnc-service.c (real_connect):
The arguments have changed, update.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2890 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/vpn-manager/nm-vpn-connection.[ch]:
* src/vpn-manager/nm-vpn-manager.[ch]:
* src/vpn-manager/nm-vpn-service.[ch]: Rewrite the vpn handling
* code. Using
dbus-glib, GObjects, signals etc.
* libnm-glib/nm-vpn-manager.[ch]:
* libnm-glib/nm-vpn-connection.[ch]: Now that the NM
* implementation changed
so much, rewrite these too.
* libnm-glib/Makefile.am: Add new files to build, build new
* binding files for
the new introspection files.
* libnm-glib/nm-client.[ch]: Remove all VPN related stuff from
* here.
* libnm-glib/nm-dbus-utils.[ch]: Renamed from nm-utils.[ch] that
* was shadowing
the header with the same name from libnm-utils.
* libnm-glib/nm-vpn-plugin.[ch]: Implement.
* libnm-util/Makefile.am: Add nm-utils.[ch] to build.
* introspection/nm-vpn-plugin.xml: Implement.
* introspection/nm-vpn-connection.xml: Implement.
* introspection/nm-vpn-manager.xml: Implement.
* src/NetworkManagerSystem.c
* (nm_system_vpn_device_set_from_ip4_config): Remove
the named manager argument, it can just as easily get it as the
caller.
(nm_system_vpn_device_unset_from_ip4_config): Ditto.
* src/vpn-manager/nm-dbus-vpn.[ch]: Remove.
* src/nm-dbus-manager.h: Fix up the name_owner signal signature.
* src/dhcp-manager/nm-dhcp-manager.c (garray_to_string): Remove,
* use one from
libnm-utils.
* libnm-util/nm-connection.c: Ditto.
* src/NetworkManagerMain.h: Remove, it's finally empty.
* configure.in: Remove utils/ from build.
* include/NetworkManagerVPN.h: Add some more defines to reduce
* the amount
of hard-coded strings.
* utils/: Move it over to libnm-util.
* test/Makefile.am: Link against libnm-util now that util/ is
* gone.
* dispatcher-daemon/Makefile.am: Ditto.
* src/Makefile.am: Ditto.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2798 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c
src/named-manager/nm-named-manager.c
src/named-manager/nm-named-manager.h
src/NetworkManager.c
src/vpn-manager/nm-vpn-manager.c
src/NetworkManagerMain.h
src/NetworkManagerSystem.c
- Remove the named-manager object from NMData structure in preparation
for NMData's timely death. Make the NMNamedManager the singleton that
it really is
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2739 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Convert to using interface indexes as the primary method of identifying
devices inside NetworkManager. Indexes are (?) stable, but devices can
be renamed at any time. Device object paths now refer to the device
index rather than the name, and you can map those two manually if you like
by looking in the /sys/class/net/<name>/ifindex file. Also moves most
netlink-related code to nm-netlink.c, and cleans up nm-netlink-monitor.c
to use interface indexes rather than names.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2731 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Bernhard Miklautz <bernhard.miklautz@shacknet.at>
* src/NetworkManagerSystem.c
- (nm_system_device_set_ip4_route): don't add the route if it's on the
same subnet (#437396)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2651 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Threading removal related cleanups:
- Use the glib default main context. Remove the device main context
member from NMDevice, and the main_context member from NMData. Change
all the idle and timeout scheduler functions to use plain
g_idle_add() and g_timeout_add().
- As a side-effect of the first change, nm_dbus_manager_get() no longer
takes an argument; fix that up too.
- Remove all locking, which is useless since we no longer use threads. For
example, nm_get_device_by_iface_locked() has been removed. The global
device list lock, the AP List lock, and all static locks in
NetworkManagerPolicy.c have been removed. The locking utility functions
in NetworkManagerUtils.c have also been removed.
- Other cleanups in spacing and code style
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2205 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.h: Introduce nm_ioctl_info(), which defines to
nm_info() if IOCTL_DEBUG is set and a no-op if not. We can use this
instead of dumping ifdef's throughout the code.
* src/NetworkManagerSystem.c, src/nm-device-802-11-wireless.c,
src/nm-device-802-3-ethernet.c, src/nm-device.c: Remove ifdef's and
use nm_ioctl_info() in lieu.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1768 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by Vinay R <rvinay@novell.com> and Robert Love <rml@novell.com>,
to add support for per-route MSS and improve support for per-interface
MTU:
* src/NetworkManagerSystem.c: Modify nm_system_device_set_ip4_route to
optionally take an MSS parameter and set it for the given route.
Remove nm_system_device_set_ip4_route_with_iface. Pass in the
NMIP4Config's stored MSS, if any.
* src/nm-ip4-config.c: Add 'mtu' and 'mss' to NMIP4Config, representing
the interface's MTU and the route's MSS, respectively. Add functions
nm_ip4_config_get_mtu, nm_ip4_config_set_mtu, nm_ip4_config_get_mss,
and nm_ip4_config_set_mss for retrieving and setting the MTU and the
MSS.
* src/nm-ip4-config.h: Add prototypes for nm_ip4_config_get_mtu,
nm_ip4_config_set_mtu, nm_ip4_config_get_mss, and
nm_ip4_config_set_mss.
* src/vpn-manager/nm-vpn-service.c: Modify to receive the MSS from the
VPN daemon.
* src/backends/NetworkManager{Arch,Debian,Gentoo,RedHat,Slackware,SUSE}.c:
Change the retval of nm_system_get_mtu to guint32.
* src/dhcp-manager/nm-dhcp-manager.c: Set the MTU on the new DHCP-given
NMIP4Config to the MTU provided by the system, if any. TODO: If DHCP
servers can specify MTU's, we should set it here if the MTU was not
provided.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1660 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerSystem.c, src/NetworkManagerSystem.h: Add
nm_system_get_mtu(), which returns a user-provided or system-mandated
MTU value for a given device, if any, or zero if no such value
exists. Add nm_system_set_mtu() to set the MTU for a given device
if we have a provided value.
* src/nm-device.c: Set the MTU of devices.
* src/backends/NetworkManagerSuSE.c: Read MTU, if any, from sysconfig.
* src/backends/NetworkManagerDebian.c,
src/backends/NetworkManagerGentoo.c,
src/backends/NetworkManagerRedHat.c,
src/backends/NetworkManagerSlackware.c: Implement stub functions.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1626 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Process netlink messages in device subclasses rather than in
NetworkManager.c. Also add support for recognizing Wireless Events.
* configure.in
- Find GLIB_GENMARSHAL
* src/Makefile.am
- Since we're marshalling custom types for wireless event signals,
we get to create our own marshallers using GLIB_GENMARSHAL
* src/NetworkManager.c
- (nm_monitor_wired_link_state): renamed to nm_monitor_setup
- (nm_monitor_setup): renamed from nm_monitor_wired_link_state, and
cut down somewhat. We no longer process signals here.
- (nm_data_new): create the netlink monitor here, and remove a
useless call to nm_policy_schedule_device_change_check()
- (nm_data_free): get rid of the netlink monitor here
- (nm_device_link_activated, nm_device_link_deactivated): removed
- (main): don't create the netlink monitor here, let nm_data_new
do that. Call nm_policy_schedule_device_change_check() right
before we jump to the mainloop to figure out which device
to use first
* src/NetworkManagerSystem.[ch]
- (nm_system_get_rtnl_index_from_iface, nm_system_get_iface_from_rtnl_index):
convert back and forth from interface names to interface
indexes
* src/nm-device-802-11-wireless.c
- (real_init): connect to wireless-event signals from the netlink
monitor object
- (nm_device_802_11_wireless_event): new function, schedule handler
for wireless event signals from the netlink monitor object. We
want the handler to run in the device's context
- (wireless_event_helper): handle wireless-event signals from netlink
- (nm_device_802_11_wireless_dispose): disconnect wireless-event
signal handler
* src/nm-device-802-11-wireless.h
- remove unused prototype for nm_device_802_11_wireless_new
* src/nm-device-802-3-ethernet.c
- (real_init): new function; set up signal handlers for link events
- (nm_device_802_3_ethernet_link_activated): new function, schedule
handler for netlink link activated events on device's main loop
- (link_activated_helper): when we get a link activated event, set
the device's link to be active
- (nm_device_802_3_ethernet_link_deactivated): new function; schedule
handler for netlink link deactivated events on device's main loop
- (link_deactivated_helper): when we get a link deactivated event, set
the device's link to be inactive
- (nm_device_802_3_ethernet_dispose): disconnect signal handler on
dispose
* src/nm-device-802-3-ethernet.h
- remove unused prototype for nm_device_802_3_ethernet_new
* src/nm-device.[ch]
- (nm_get_device_by_iface_locked): variant of nm_get_device_by_iface
but locks the device list
- (nm_device_set_active_link): a little bit of cleanup and de-indenting
* src/nm-netlink-monitor.[ch]
- (nm_netlink_monitor_class_install_signals): New signal
"wireless-event"
- (nm_netlink_monitor_new): keep reference to NMData so we can get
at the device list
- (nm_netlink_monitor_event_handler): expand for wireless events too
* src/nm-marshal-main.c
- Include generated nm-marshal.c and nm-marshal.h
* src/nm-marshal.list
- List of custom marshal functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1555 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by Sureshkumar T <tsureshkumar@novell.com>:
* src/vpn-manager/nm-vpn-connection.c, src/NetworkManagerSystem.c:
Check for and handle empty string for iface.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1426 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by T Sureshkumar <tsureshkuman@novell.com>:
* src/NetworkManagerSystem.c: Don't assert iface != NULL, allowing VPN
modules that do not use an interface.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1329 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch by Preggna S:
* src/NetworkManagerSystem.c, src/vpn-manager/nm-vpn-connection.c:
IPsec does not require that a VPN client be bound to an interface,
due to the use of the in-kernel IPSec bits. So make the tunnel
device optional.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1258 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* refactor NMDevice into a GObject-based framework with separate
objects for wired and wireless. The following files are no
longer used but should stick around for a bit so we don't
loose code through the cracks:
NetworkManagerDevice.c
NetworkManagerDevice.h
NetworkManagerWireless.c
NetworkManagerWireless.h
The intent here is to allow each device type to manage its own
connection & activation life-cycle, ie to allow wireless devices
to interface with wpa_supplicant, etc. There's a fair bit of
encapsulation breakage right now that should gradually get pulled
back into each device, along with things like periodic property
updates and link probing.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1244 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerSystem.c: If iface_to_rtnl_link() returns NULL, the
interface is already gone, so don't call rtnl_link_change() to down
it (which will segfault, anyhow).
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1114 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Start using libnl. You need 1.0-pre3 or higher. Eventually
we should replace most of the distro-specific backend code
with libnl stuff.
Get it here: http://people.suug.ch/~tgr/libnl/
* configure.in
src/Makefile.am
- Add checks for libnl pkgconfig file
- Use LIBNL_LIBS & LIBNL_CFLAGS
* src/NetworkManagerSystem.c
src/nm-ip4-config.[ch]
- Use libnl rather than ioctl() for most things
- Remove unused functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1082 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Support for named + DBus, using Red Hat DBus patches for named. You
can find those patches here, with "dbus" in the patch's filename:
http://cvs.fedora.redhat.com/viewcvs/devel/bind/
Don't forget the named dbus service file either.
Instead of writing a config file and spawing a named process, NM will
use an already-running dbus-enabled named if it finds one. NM will
update named's forwarder configuration on the fly using dbus.
If there is no dbus-enabled named running, NM will automatically fall
back to writing the most-recent DNS server information to /etc/resolv.conf
and calling nm_system_update_dns() to kick the system's resolver.
Accordingly, all named-related configure-time options have been removed.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@981 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tomislav Vujec <tvujec@redhat.com>
* gnome/applet/applet-dbus-info.c
- (nmi_dbus_get_vpn_connection_routes): new function, pull routes out of
GConf and pass them to NetworkManager. New key is 'routes' under
the VPN connection, and should be a string list
* src/NetworkManagerSystem.c
- (nm_system_vpn_device_set_from_ip4_config): if user-defined routes exist,
set them on the device when we set the rest of the VPN config. Ensure
they are in the correct format since they are passed directly to the
command line.
* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerDebian.c
- (nm_system_device_add_route_via_device_with_iface): new function
* src/vpn-manager/nm-dbus-vpn.c
- (nm_dbus_vpn_get_routes): grab VPN routes from NetworkManagerInfo
* src/vpn-manager/nm-vpn-manager.c
- (nm_vpn_manager_handle_ip4_config_signal): grab routes from NMI and pass
them into the IP4 config functions
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@637 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* gnome/applet/applet-dbus-device.c
gnome/applet/applet-dbus-info.c
gnome/applet/applet-dbus.c
gnome/applet/applet.c
gnome/applet/applet.h
- (nmwa_get_device_for_nm_device) -> (nmwa_get_device_for_nm_path)
* gnome/applet/applet-dbus.c
- (nmwa_dbus_filter): trap DeviceCarrierOn/DeviceCarrierOff signals
so we notice when wired device's carriers come back on. Should
fix issue with wired devices being grayed out even if the cable
is in, for devices that support carrier detection.
* gnome/applet/applet.c
- (nmwa_driver_notify): bash focus-stealing prevention in the face
- (nmwa_act_stage_to_pixbuf): Clarify wireless ACT_STAGE_DEVICE_CONFIG
tooltip message
- (nmwa_menu_item_activate, nmwa_menu_add_device_item, nmwa_menu_item_data_free):
Fix situation where applet wouldn't respond to menu selections
* src/NetworkManager.c
src/NetworkManagerDevice.c
src/NetworkManagerDbus.c
src/NetworkManagerDbus.h
- (nm_dbus_signal_device_status_change) -> (nm_dbus_schedule_device_status_change_signal)
* src/NetworkManagerDbus.c
- (nm_dbus_send_network_not_found, nm_dbus_schedule_network_not_found_signal):
Remove, no longer used or relevant
- (nm_dbus_signal_device_status_change): Better signal enum->string matching
- (nm_dbus_schedule_device_status_change_signal): add
* src/NetworkManagerDevice.c
- (nm_device_worker_thread_stop): don't try to join a NULL worker thread
- (nm_device_set_link_active): Fix up switching for non-carrier-detect devices,
ie don't deactivate them unless explicitly told to by the user. Also send
CARRIER_OFF / CARRIER_ON signals when link changes
- (nm_device_set_essid, nm_device_set_enc_key, nm_device_is_up, nm_device_set_mode):
Don't print error message when device is no longer around
- (nm_device_deactivate): kill any current DHCP process attached to this device,
not just during activation
* src/NetworkManagerPolicy.c
- (nm_policy_auto_get_best_device): Ignore semi-supported devices completely from
auto-device-selection.
- (nm_policy_device_change_check): Don't interrupt semi-supported devices
* src/NetworkManagerSystem.c
- (nm_system_device_set_up_down_with_iface): Quiet first warning message when device
is no longer present (Bill Moss)
* src/backends/shvar.c
- (svOpenFile): Open read-only to make SELinux happy
* src/backends/NetworkManagerRedHat.c
- (nm_system_device_get_system_config): Use SYSCONFDIR rather than hardcoding
the path to the ifcfg-* files
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@613 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Suggestion from Bill Moss:
* src/NetworkManagerSystem.c
- (nm_system_device_set_up_down_with_iface): ignore ENODEV
* src/NetworkManager.c
- (nm_data_free): move destruction of the various managers after
release of device list, because deactivating and freeing a device
requires at least the named manager
- (nm_poll_and_update_wireless_link_state):
(nm_device_link_activated):
(nm_device_link_deactivated):
don't grab the device list lock when actually updating device
link status or strength, since nm_device_set_link_active()
needs to call nm_get_active_device(), which also locks the device list.
* src/NetworkManagerDevice.c
- (nm_device_set_link_active): if a device's link switches from off->on,
and it's wired, and the active device is wireless (or there is no
active device), activate the new device whose link just came on
- (link_to_specific_ap): try to smooth over intermittency in wireless links
my only calling the link to the current ap "failed" when more than 2
consecutive link checks have failed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@606 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerDevice.c
- (nm_device_probe_wireless_link_state): don't lock the scan mutex here
but let link_to_specific_ap() do the locking where it needs
Patch from Bill Moss:
* src/NetworkManagerSystem.c
- Set MTU of VPN devices to 1412
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@605 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Kill dhcpcd. We now use "dhcdbd", a dbus daemon that controls dhclient.
This means that NetworkManager shouldn't have DHCP issues anymore. It also
means you need dhcdbd, which you can get here (get the latest one):
http://people.redhat.com/jvdias/dhcdbd/
Technically NetworkManager can use any DHCP daemon that uses the same DBUS
interface as dhcdbd.
* Rewrite device activation to facilitate the new DHCP infrastructure and
future improvements. Its now "activation request" based, ie there is a single
activation request composed of the device, access point, and other info which
follows the entire activation process. There are 5 stages of the activation
process which correspond to:
1) Device preparation
2) Device configuration (bring it up, set ESSID/Key/etc)
3) IP Config Start (fire off DHCP if we're using it)
4) IP Config Get (grab config from DHCP or static config files)
5) IP Config Commit (set device's IP address, DNS, etc)
Note that there is no longer a "scanning" step, since the access point must
be known _before_ activation starts. If the access point drops out or does
not exist for some reason, the entire activation process fails and must be
restarted for a different access point or device.
Patch from Bill Moss:
* gnome/applet/applet.c
- Fix type of vpn_failure dialog -> vpn_banner dialog
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@597 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Peter Jones:
* Remove usage of varargs to fix crashes on PPC (RH #154336)
Patch from Bill Moss:
* src/NetworkManagerSystem.c
- Fix checking of return value from ioctl()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@592 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Initial VPN Support
- supports 'vpnc'
- reworks device IP configuration, backend files have changed and will need
to be updated for all distributions. I will try to do what I can for
them, but I cannot test them.
- Move named directory to src/named-manager
- Make backends directory self-contained
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@571 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
