The newly added bond mode APIs in nm-utils will be new in 1.2, so mark
them as such in the headers and docs, move them to a new section in
libnm.ver.
Since we're adding the new section to libnm.ver, this also seems like
a good time to bump the soname.
I had argued for putting the local symbols in their own section, since
it doesn't make sense to have local symbols introduced in 1.2 in the
libnm_1_0_0 section... but apparently even if the section has no
exported symbols, rpm's find-provides still picks it up if it's there,
creating an ugly additional "provides" for libnm. So get rid of that.
We now also use a similar function in VPN plugins. It makes
sense to provide a generic implementation in libnm.
Signed-off-by: Thomas Haller <thaller@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=740783
In general, we shouldn't end up with an unencrypted copy of a
certificate key anyway, so this function ought to be unnecessary (or
at least, not broadly useful enough to be in the public API).
nm-applet's GConf migration tool needs it, but that will eventually go
away, and until then it can just use libnm-util.
Add nm-utils methods to check if a file is a certificate or private
key file.
nm-applet currently has its own internal versions of these, but they
ended up having to duplicate a bunch of logic that we already have in
crypto.c.
Add nm_setting_get_dbus_property_type(), and use this to get the
correct type for properties in nm-seting-docs.xml, in situations where
the D-Bus and GObject property types don't match.
In the case of enum/flags-valued properties, give both the enum name
and the underlying D-Bus type.
Make the type return GBytes since most in-tree users want that.
Allow the function to accept many more formats as valid hex, including
bytes delimited by ':' and a leading '0x'.
Rename NMVpnPluginUiInterface to NMVpnEditorPlugin (to clarify that
it's unrelated to NMVpnPlugin), and add it to NetworkManager.h.
Rename NMVpnPluginUiWidgetInterface to NMVpnEditor, because it's not a
widget, and will soon be used for non-gui editing too. (Also, add a
placeholder for the method that non-gui editing will use.)
Fix the typedefs to not mix up the (dummy) NMVpnEditorPlugin and
NMVpnEditor types with the types of their interface structs. Update to
use G_DEFINE_INTERFACE.
Drop NMVpnPluginUiInterfaceProp; it doesn't matter what codes plugin
implementations use for the interface properties that they implement.
Create NMIPConfig as the parent of NMIP4Config and NMIP6Config, and
remove the two subclasses from the public API; while it's convenient
to still have both internally, they are now identical to the outside
world.
The gateway is a global property of the IPv4/IPv6 configuration, not
an attribute of any particular address. So represent it as such in the
API; remove the gateway from NMIPAddress, and add it to
NMSettingIPConfig.
Behind the scenes, the gateway is still serialized along with the
first address in NMSettingIPConfig:addresses, and is deserialized from
that if the settings dictionary doesn't contain a 'gateway' key.
Adjust nmcli's interactive mode to prompt for IP addresses and gateway
separately. (Patch partly from Jirka Klimeš.)
Split a base NMSettingIPConfig class out of NMSettingIP4Config and
NMSettingIP6Config, and update things accordingly.
Further simplifications of now-redundant IPv4-vs-IPv6 code are
possible, and should happen in the future.
Add key-value attributes to NMIPAddress and NMIPRoute, and use them to
store IPv4 address labels. Demote NMSettingIP4Config:address-labels to
a D-Bus-only property, and arrange for :addresses setter to read the
labels out of that property when creating the addresses.
Merge NMIP4Address and NMIP6Address into NMIPAddress, and NMIP4Route
and NMIP6Route into NMIPRoute. The new types represent IP addresses as
strings, rather than in binary, and so are address-family agnostic.
libnm mostly used GPtrArrays in its APIs, except that arrays of
connections were usually GSLists. Fix this and make them GPtrArrays
too (and rename nm_client_list_connections() to
nm_client_get_connections() to match everything else).
The new VPN plugin API will hopefully simplify some the the tasks that
are currently handled by nm-vpn-plugin-utils functions, so make those
functions explicitly be part of the "old" API. (If we still want them
in the new API we can just move them back out, and have the "_old_"
versions just be wrappers around the undeprecated ones.)
Rename libnm's NMVpnPlugin to NMVpnPluginOld, in preparation for
having a new-and-improved NMVpnPlugin in NM 1.2. Also remove it from
NM-1.0.gir.
Make nm-vpn-plugin-old.h be separately includable, since it's not
included from NetworkManager.h, and we probably don't want it to be.
Remove NMVpnPlugin, NMVpnPluginUiInterface, and nm-vpn-plugin-utils
from the docs, since they're basically undocumented anyway.
Consolidate NMClientError and NMObjectError (such that there is now
only one libnm-API-specific error domain). In particular, merge
NM_CONNECTION_ERROR_CONNECTION_REMOVED with
NM_OBJECT_ERROR_OBJECT_CREATION_FAILURE as the new
NM_CONNECTION_ERROR_OBJECT_CREATION_FAILED.
Also make object_creation_failed() be a plain method rather than a
signal, since there's no reason for anyone to be connecting to it on
another object. And remove its GError argument because the subclass
can just create its own more-specific error.
Move the definition of NMSettingsError to nm-errors, register it with
D-Bus, and verify in the tests that it maps correctly.
Remove a few unused error codes, simplify a few others, and rename
GENERAL to FAILED and HOSTNAME_INVALID to INVALID_HOSTNAME, for
consistency.
Move the definition of NMManagerError to nm-errors, register it with
D-Bus, and verify in the tests that it maps correctly.
NM_MANAGER_ERROR_INTERNAL gets renamed to NM_MANAGER_ERROR_FAILED for
consistency. NM_MANAGER_ERROR_UNMANAGED_DEVICE is dropped since that
name doesn't really describe the one place it was previously used in.
NM_MANAGER_ERROR_SYSTEM_CONNECTION is dropped because it was't being
used. NM_MANAGER_ERROR_UNSUPPORTED_CONNECTION_TYPE is dropped because
it can be replaced with an NM_CONNECTION_ERROR.
NM_MANAGER_ERROR_AUTOCONNECT_NOT_ALLOWED is turned into the more
generic NM_MANAGER_ERROR_CONNECTION_NOT_AVAILABLE.
Also, remove the <tp:possible-errors> sections from nm-manager.xml,
since they were completely out of date.
As with the settings, each device type was defining its own error
type, containing either redundant or non-useful error codes. Drop all
of the subtype-specific errors, and reduce things to just
NM_DEVICE_ERROR_FAILED, NM_DEVICE_ERROR_INCOMPATIBLE_CONNECTION, and
NM_DEVICE_ERROR_INVALID_CONNECTION.
The device-type-specific errors were only returned from their
nm_device_connection_compatible() implementations, so this is also a
good opportunity to simplify those, by moving duplicated functionality
into the base NMDevice implementation, and then allowing the
subclasses to assume that the connection has already been validated in
their own code. Most of the implementations now just check that the
connection has the correct type for the device (which can't be done at
the NMDevice level since some device types (eg, Ethernet) support
multiple connection types.)
Also, make sure that all of the error messages are localized.
NMRemoteConnection used to return
NM_REMOTE_CONNECTION_ERROR_DISCONNECTED if you tried to operate on a
connection that had been disconnected from its D-Bus proxy. But this
disappeared in the gdbus port (since gdbus doesn't emit a signal when
it happens, so it's harder to notice. And it's not clear why
NMRemoteConnection did this when no other class did anyway...).
Add nm-errors.[ch], and move libnm-core's two error domains
(NMConnectionError and NMCryptoError) there.
NMCryptoError wasn't previously visible, but it can be returned from
some public API, so it should be.
Each setting type was defining its own error type, but most of them
had exactly the same three errors ("unknown", "missing property", and
"invalid property"), and none of the other values was of much use
programmatically anyway.
So, this commit merges NMSettingError, NMSettingAdslError, etc, all
into NMConnectionError. (The reason for merging into NMConnectionError
rather than NMSettingError is that we also already have
"NMSettingsError", for errors related to the settings service, so
"NMConnectionError" is a less-confusable name for settings/connection
errors than "NMSettingError".)
Also, make sure that all of the affected error messages are localized,
and (where appropriate) prefix them with the relevant property name.
Renamed error codes:
NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND
NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET
Remapped error codes:
NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING
NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY
NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY
NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY
Dropped error codes (were previously defined but unused):
NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED
NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING
NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED
NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING
NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING
NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
nm_setting_lookup_type_by_quark() was only ever used in places that
were still mistakenly assuming the old style of nm_connection_verify()
errors, where the error message would contain only a property name and
no further explanation. Fix those places to assume that the error will
contain a real error message, and include both the setting name and
the property name.
Given that, there's no longer any need for
nm_setting_lookup_type_by_quark(), so drop it.
The functions nm_setting_clear_secrets(),
nm_setting_clear_secrets_with_flags(), and nm_setting_need_secrets()
are not used outside of libnm-core. Remove them from public API.
Signed-off-by: Thomas Haller <thaller@redhat.com>
The autoconnect priority has only any relevance, if the connection
is autoconnect too.
The priority defaults to zero, with higher numbers meaning preferred.
The valid range is limited to [-999,999].
Signed-off-by: Thomas Haller <thaller@redhat.com>
NMActiveConnection:connection was an object path rather than an
NMRemoteConnection because in the past the NMObject property system
wasn't capable of handling NMRemoteConnection-valued properties.
NMActiveConnection:master was an object path rather than an NMDevice
entirely by accident. Fix both.
NMActiveConnection:specific-object can't currently be converted to an
object, because we don't know ahead of time what object type it is,
and NMObject can't deal with that. Instead, we rename it to
:specific-object-path (and likewise for its get function), both to
emphasize that it doesn't behave like other properties, and to leave
the old name open for an actual object-valued property later on.
NMSettingSerial:parity was defined as a char-typed property that could
have the (case-sensitive!) values 'n', 'E', or 'o'. This is zany. Add
an NMSettingSerialParity enum, and use that instead.
Add nm_utils_wifi_strength_bars(), which figures out whether the
terminal can display graphical wifi strength bars, and converts a
numerical value to the appropriate Unicode or ASCII characters.
This also now takes into consideration the fact that the console font
doesn't contain all of the necessary characters, so we can't display
the graphical bars there. (rh #1131491)
Add the missing variant in most places in the API where previously
there was either only a synchronous version or only an asynchronous
version.
There is not yet a synchronous nm_client_activate_connection(),
nm_client_add_and_activate_connection(), or
nm_remote_settings_add_connection(), because the existing async code
depends on waiting for other asynchronous events, so making them run
synchronously is slightly more complicated. But these APIs can be
added later.
Make synchronous APIs take GCancellables, and make asynchronous APIs
use GAsyncReadyCallbacks and have names ending in "_async", with
"_finish" functions to retrieve the results.
Also, make nm_client_activate_connection_finish(),
nm_client_add_and_activate_finish(), and
nm_remote_settings_add_connection_finish() be (transfer full) rather
than (transfer none), because the refcounting semantics become
slightly confusing in some edge cases otherwise.
Merge nm_remote_settings_add_connection() and
nm_remote_settings_add_connection_unsaved(), and likewise
nm_remote_connection_commit_changes() and
nm_remote_connection_commit_changes_unsaved(), by adding a boolean
flag to each saying whether to save to disk.
Port libnm-core/libnm to GDBus.
The NetworkManager daemon continues to use dbus-glib; the
previously-added connection hash/variant conversion methods are now
moved to NetworkManagerUtils (along with a few other utilities that
are now only needed by the daemon code).
There's not much point in keeping them separate: all existing
libnm-glib-vpn users also link against libnm-glib, and the amount of
extra code added to libnm by merging in libnm-vpn is negligible.
Additionally, nm-vpn-plugin will later need access to some
libnm-internal APIs.
So, merge them together.
