We also cancel the idle handler
nm_clear_g_source (&priv->queued_ip_config_id_x[IS_IPv4])
which means, nobody is going to process these addresses (at least
for the moment).
The purpose of "dad6_failed_addrs" is to keep track of addresses that
might be interesting for checking about DAD failures. If we are no
longer reacting on IP changes (because the idle handler was removed),
we also no longer need these addresses.
(cherry picked from commit dbb936e5c8)
This simplifies commit 31ca7962f8.
We don't need the boolean flags like "queued_ip4_config_pending" to
track whether we received any platform signals while being not yet
initialized in platform (udev, NM_UNMANAGED_PLATFORM_INIT).
In general, as long as the device is NM_UNMANAGED_PLATFORM_INIT,
all platform signals are ignored. And when the device becomes managed,
we schedule anyway an initial config-change.
(cherry picked from commit 18ecc4b4f1)
"debug" was documentation in `man NetworkManager.conf` as a valid
logging backend. However, it was completely ignored by
nm_logging_syslog_openlog().
In fact, it makes not sense. Passing debug = TRUE to
nm_logging_syslog_openlog(), means that all messages will be
printed to stderr in addition to syslog/journal. However, when
NetworkManager is daemonizing, stderr is closed.
Whether NetworkManager is daemonizing depends entirely on command
line options --no-daemon and --debug. Hence, the logging backend "debug"
from the configuration file either conflicts or is redundant.
Also, adjust logging backend description in `man NetworkManager.conf`.
Also, log a warning about invalid/unsupported logging backend.
(cherry picked from commit 2ccf6168dc)
'num_grat_arp' and 'num_unsol_na' are actually the same attribute on
kernel side, so if only 'num_grat_arp' is set in configuration, we
first write its value and then overwrite it with the 'num_unsol_na'
default value (1). Instead, just write one of the two option.
https://bugzilla.redhat.com/show_bug.cgi?id=1591734
(cherry picked from commit 42b0bef33c)
If commit_mtu() is called multiple times and dev->get_configured_mtu()
returns @is_user_config=FALSE, only the first call changes the
MTU. So, for example, when the parent MTU of a VLAN changes, we apply
the new MTU only the first time.
Rework the handling of MTU in NMDevice, and store the source of the
configured MTU. When commit_mtu() is called again, we ask the subclass
a MTU to configure and apply it only if the source has higher
priority, or when the parent MTU changed.
(cherry picked from commit 2f8917237f)
Instead of returning a boolean @is_user_config value from
get_configured_mtu(), return an mtu-source enum with possible values
NONE,CONNECTION. This enum will be expanded later; for now there is no
change in behavior.
(cherry picked from commit 9f8b0697de)
<error> level is for something really bad happening. When another party
(iwd in this case) sends a D-Bus request that we cannot meaningfully handle,
that is hardly reason to warn about. <debug> level is enough in this case.
Also, give all messages a common prefix "agent-request" so that we have
something to grep for.
(cherry picked from commit aef5110fa6)
nm_utils_random_bytes() will always try its best to give some
random numbers. A failure only means, that the kernel interfaces
get_random() or /dev/urandom failed to provide good randomness. We
don't really need good random numbers here, so no need to handle
a failure.
(cherry picked from commit 44cd60e820)
Allow the IWD backend to use secrets provided in the connection settings
on initial connection attempt, only require new secrets on subsequent
connections when IWD asks for them -- it only asks if fresh secrets are
required.
(cherry picked from commit 24f5cf23e5)
The IWD DBus interface currently
(https://git.kernel.org/pub/scm/network/wireless/iwd.git/tree/doc/agent-api.txt?id=38952813dddd776f66d2ed5e88eca9a892964c06)
knows about 3 secret types related to 802.1x authentication in addition
to the PSK secret request. Add support for the new methods and the new
secret types in NM's implementation of the IWD secret agent. Note that
the secret types are mapped to NMSetting8021x property keys and they are
then sent to the NM Secret Agent in the hints parameter to GetSecrets,
this will need support in the NM clients as the exact usage of the
hints parameter is specified a little ambiguously, but this seems to be
one of the permitted usages.
Rework the IWD agent interface info initialization to use NM convenience
macros.
(cherry picked from commit 74d9e04a66)
To improve the code logic and reduce space for bugs, don't save the
dbus invocation object as priv->secrets_request, instead move it to
the nm_act_request_get_secrets()'s user_data as we only need the
invocation object for exactly the life time of the request. See
https://github.com/NetworkManager/NetworkManager/pull/139 for
discussion.
(cherry picked from commit ffd96edf76)
Blank mode property in the wireless settings is documented in
libnm-core/nm-setting-wireless.c to mean infrastructure mode.
(cherry picked from commit d01ba607a6)
If a device-factory wouldn't support any link-type or setting-type,
we would not take an additional reference to the @factory instance
(because, the factory is not added to one of the static hash tables).
As such, we would invoke the callback with a factory instance, which
is about to be destroyed immediately afterwards. That would be unusual
for device-plugins, because usually a device-plugin is never destroyed
and essentially leaked at exit.
Just don't get into that situation. All device plugins are internal API,
and they are known to support at least something. Assert for that.
(cherry picked from commit 94200b03fe)
Actually, we anyway leak them, because they are added to static hash tables
which are never released. Anyway, get the ref-count right.
(cherry picked from commit 4c43d7cad3)
Internal device plugins are compiled-in. In fact, none of the
internal device plugins can currently be disabled via compile
time options. The user would have to patch the sources to
not include a particular device plugin.
Hence, the available device plugins depends exclusively on the
build itself. That is not worth <info> level logging. Especially,
as it was quite verbose, logging 13 lines.
(cherry picked from commit dff157b867)
_LOGD() is preferred, because it includes a common prefix depending
on the device. This macro requires, that we have a suitable @self
variable in the local scope.
Rather trivial change. Return-early, to completely handle the simpler
case (the success case) first. In the failure case, we only need
extra effort to generate a nice error message.
It is safer to enable send-sci by default because, at the cost of
8-byte overhead, it makes MACsec work over bridges (note that kernel
also enables it by default). While at it, also make the option
configurable.
https://bugzilla.redhat.com/show_bug.cgi?id=1588041
We set the metric to the routes as we receive them from the PPP plugin. We
ought to let the modem know before it starts IPv4 configuration, not right
before the commit.
https://bugzilla.redhat.com/show_bug.cgi?id=1585611
For better or worse, the logging done for ipv4.dhcp-client-id
is prefixed with ipv4.dhcp-client-id. Let ipv6.dhcp-duid follow
that pattern.
Also, generate_duid_from_machine_id() would log at two places,
it should use the same logging prefix.
Also, it logs the value of "duid" variable. Ensure, that "duid"
is not %NULL at that point.
Also, fix leak of nm_dhcp_utils_duid_to_string() value during logging.
Previously, there were two blocks
if (NM_IN_SET (duid, "ll", "llt")
preprocess_hwaddr()
else if (NM_IN_SET (duid, "stable-ll", "stable-llt", "stable-uuid"))
preprecess_stable_id()
if (nm_streq (duid, "ll")
generate_ll()
else if (nm_streq (duid, "llt"))
generate_llt()
else if (nm_streq (duid, "stable-ll")
generate_stable_ll()
...
That is, the latter block depends on the execution of the previous
block, while the previous block is guarded by a particular condition,
slighlty different than the condition in the later block.
It is confusing to follow. Instead, check for our cases one by one, and
when we determined a particular DUID type, process it within the same block
of code. Now the code consists of individual blocks, that all end with a "goto
out*". That means, it's easier to understand the flow of the code.
Also, don't initialize duid_error variable and separate between
"out_error" and "out_good". This allows that the compiler gives
a warning if we missed ot initialize duid_error.
dhcp6_get_duid() already handles failure to generate the DUID in a
sensible manner. No reason to duplicate the error handling in
generate_duid_from_machine_id().
Especially, because generate_duid_from_machine_id() used to cache the
random DUID in memory and reuse it from then on. There is no reason to do
that, /etc/machine-id must be available to NetworkManager. We still
handle such a grave error gracefully by generating a random DUID.
First of all, generating the client-id is not expected to fail. If it fails,
something is already very wrong. Maybe, a failure to generate a client-id
should result in failing the activation. However, let's not go full
measure in this question.
Instead:
- ensure that we log a warning and a reason why the client-id could not
be generated.
- fallback to a random client id. Clearly, we were unable to generate
the requested client-id, hence, we should fallback to a default value
which does not make the host easily identifyable. Of course, that means
that the generated DHCP client-id is not at all stable. But note that
something is already very wrong, so when handling the error we should do
something conservative (that is, protecting the users privacy).
This is also what happens for a failure to generate the ipv6.dhcp-duid.
In practice, there should be no difference between peeking into
the platform cache, or using the cached value from nm_device_get_hw_address().
Prefer the hardware address from the platform, because:
- we also pass the current MAC address to nm_dhcp_manager_start_ip4().
For not particularly strong reason, it uses the MAC address obtained
from platform. At the least, it makes sense that we use the same
addresses for the client-id as well.
- ipv6.dhcp-duid also gets the address from platform. Again,
no strong reason either way, but they should behave similar
in this regard.
This commit centralizes the DUID generation in nm-device.c.
As a consequence, a DUID is always provided when starting a
DHCPv6 client. The DHCP client can override the passed DUID
with the value contained in the client-specific lease file.
allow to specify the DUID to be used int the DHCPv6 client identifier
option: the dhcp-duid property accepts either a hex string or the
special values "lease", "llt", "ll", "stable-llt", "stable-ll" and
"stable-uuid".
"lease": give priority to the DUID available in the lease file if any,
otherwise fallback to a global default dependant on the dhcp
client used. This is the default and reflects how the DUID
was managed previously.
"ll": enforce generation and use of LL type DUID based on the current
hardware address.
"llt": enforce generation and use of LLT type DUID based on the current
hardware address and a stable time field.
"stable-ll": enforce generation and use of LL type DUID based on a
link layer address derived from the stable id.
"stable-llt": enforce generation and use of LLT type DUID based on
a link layer address and a timestamp both derived from the
stable id.
"stable-uuid": enforce generation and use of a UUID type DUID based on a
uuid generated from the stable id.
DHCPv4 can fail for two reasons:
(a) the client failed to contact server and to get an initial lease
(b) the client failed to renew the lease after it was successfully
acquired
For (a) the client generates a TIMEOUT event, for (b) an EXPIRED
event. Currently we fail the IP method immediately after (a), but
this doesn't work well when the carrier flickers and we restart the
client because if the server goes temporarily down, the IP method
fails and DHCP is never restarted.
Let's change this, and determine whether to fail IP configuration only
by looking at the current IP state: when it's IP_CONF then we are
getting the initial lease and a failure means that IP configuration
must fail; otherwise any other state means that the lease expired or
could not be renewed and thus we keep the client running for the grace
period.
https://bugzilla.redhat.com/show_bug.cgi?id=1573780
ip_config_merge_and_apply() can be called without an applied
connection, but then it calls nm_device_set_ip_config() and tries to
retrieve the configured MTU, throwing an assertion if the applied
connection is NULL.
src/devices/nm-device.c: line 8080 (nm_device_get_configured_mtu_for_wired): should not be reached
Since it doesn't make sense apply a MTU from the connection when there
is no connection, add a check against this.
