The program only needs to know the local IPv4 address, the local IPv6
address and the PREF64. There is no need to create multiple maps for
that, just pass a configuration struct containing those 3 fields.
Avoid using pointer arithmetic in the BPF program, so that it requires
only CAP_BPF and not CAP_PERFMON. In this context "pointer arithmetic"
means adding a variable value to a packet pointer. This means that the
program no longer tries to parse variable-size headers (IPv4 options,
IPv6 extension headers). Those were already not supported before. It
also doesn't parse VLAN tags, but there should be no need for that. If
we use fixed offset, we can avoid using the parsing helpers from
libxdp.
There are 3 possible results from clat_translate_v6():
1. the packet didn't match the CLAT IPv6 address and must be
accepted;
2. the packet matches but it is invalid and so it must be dropped;
3. the packet matches and it is valid; clat_handle_v6() should
translate the packet to IPv4;
Before, the function returned TC_ACT_SHOT for both 2 and 3. Therefore,
clat_handle_v6() tried to rewrite also invalid packets.
Fix that by returning TC_ACT_UNSPEC for valid packets, meaning that
there isn't a final verdict yet.
When connecting to a wifi network and providing the password on the
command line, nmcli first looks if there is a compatible connection to
reuse. If there is not, it creates and activates a new one via a
single call to AddAndActivate().
If there is a compatible connection, nmcli first calls Update() on it
to set the new password and then Activate() to bring it up. Before
that, it registers a secret agent that can prompt for a new password
in case of authentication failure.
However, as soon as nmcli registers a secret agent, NM tries to
activate again the connection if it was blocked due to a previous
authentication failure. This connection attempt is going to fail
because it still uses the old password, as new one hasn't been set via
Update().
Change the order of operations to register the agent after Update()
and before Activate().
Reproducer:
nmcli device wifi connect SSID password BAD_PASSWORD
nmcli device wifi connect SSID password GOOD_PASSWORD
Fixes: c8ff1b30fb ('nmcli/dev: use secret agent for nmcli d [wifi] connect')
Executing this command twice, or when a connection profile already
exists for the SSID:
nmcli device wifi connect $SSID password $PASSWORD
returns error:
Error: 802-11-wireless-security.key-mgmt: property is missing.
When setting the password nmcli was wiping the existing wireless
security setting.
Fixes: c8ff1b30fb ('nmcli/dev: use secret agent for nmcli d [wifi] connect')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1688
The function strerror_r returns an int per POSIX spec, but GNU version
returns char *. Using it fails the compilation in Alpine, so use
_nm_strerror_r instead that handles both cases.
Fixes: 41e28b900f ('daemon-helper: add read-file-as-user')
Add a new public function nm_utils_copy_cert_as_user() to libnm. It
reads a certificate or key file on behalf of the given user and writes
it to a directory in /run/NetworkManager. It is useful for VPN plugins
that run as root and need to verify that the user owning the
connection (the one listed in the connection.permissions property) can
access the file.
Only allow private VPN connections if the VPN plugin declares the
supports-safe-private-file-access capability. Also check that the
private connection doesn't have more than one owner.
The new API indicates that the VPN plugin supports reading files
(certificates, keys) of private connections in a safe way
(i.e. checking user permissions), or that it doesn't need to read any
file from disk.
If we add a new property in the future and it references a certificate
or key stored on disk, we need to also implement the logic to verify
the access to the file for private connections.
Add a new property flag NM_SETTING_PARAM_CERT_KEY_FILE to existing
certificate and key properties, so that it's easier to see that they
need special treatment. Also add some assertions to verify that the
properties with the flag are handled properly.
While at it, move the enumeration of private-files to the settings.
In case of private connections, the device has already read the
certificates and keys content from disk, validating that the owner of
the connection has access to them. Pass those files as blobs to the
supplicant so that it doesn't have to read them again from the
filesystem, creating the opportunity for TOCTOU bugs.
During stage2 (prepare) of an activation, check if the connection is
private and if it contains any certificate/key path. If so, start
reading the files and delay stage2. Once done, store the files'
content into priv->private_files.table and continue the activation.
Add function nm_utils_read_private_files(). It can be used to read a
list of paths as the given user. It spawns the daemon-helper to read
each path and returns asynchronously a hash table containing the files
content.
Also add nm_utils_get_connection_private_files_paths() to return a
list of file paths referenced in a connection. The function currently
returns only 802.1x file paths for certificates and keys.
The full output of the daemon helper is added to a NMStrBuf, without
interpreting it as a string (that is, without stopping at the first
NUL character).
However, when we retrieve the content from the NMStrBuf we assume it's
a string. This is fine for certain commands that expect a string
output, but it's not for other commands as the read-file-as-user one.
Add a new argument to nm_utils_spawn_helper() to specify whether the
output is binary or not. Also have different finish functions
depending on the return type.
When connecting, we add the blobs to the Interface object of the
supplicant. Those blobs are not removed on disconnect and so when we
try to add blobs with the same id, the supplicant returns an error.
Make sure we start from a clean slate on each connection attempt, by
deleting all existing blobs. Probably we should also delete the added
blobs on disconnect, but that's left for a future improvement.
Add a new command to read the content of a file after switching to the
given user. This command can be used to enforce Unix filesystem
permissions when accessing a file on behalf of a user.
In the past, stable branches used odd micro numbers as development micro
version. Because of that, NM_API_VERSION was defined with MICRO+1 so we
don't get warnings during development.
As we stopped using odd micro=devel it is wrong to set MICRO+1 on odd
releases. Final users of 1.52.3 has NM_API_VERSION 1.52.4.
However, during development we need to have MICRO+1. For example, if we
are working on top of 1.52.3 towards the next 1.52.4, we define new
symbols with NM_AVAILABLE_IN_1_52_4. Because of that, we get compilation
failures until we finally bump to 1.52.4, just before the release. The
CI remains red until then, potentially missing many bugs.
For now, just set MICRO+1 all the time. It is wrong, but it was wrong
half of the time anyway, and at least we'll have a green CI until we
implement a definitive solution.
The D-Bus API documentation of the IPv4 and IPv6 settings say:
* addresses
Deprecated in favor of the 'address-data' and 'gateway'
properties, but this can be used for backward-compatibility
with older daemons. Note that if you send this property the
daemon will ignore 'address-data' and 'gateway'.
* gateway
The gateway associated with this configuration. This is only
meaningful if "addresses" is also set.
This documentation wrongly suggests that at D-Bus level "gateway"
requires "addresses", while it actually requires "address-data". The
reason for the inconsistency is that the gateway documentation is
common between nmcli and D-Bus and it refers to the "address" GObject
property, not to the D-Bus property.
Fix this inconsistency by not explicitly mentioning the property name.
Fixes: 36156b70dc ('libnm: Override parts of nm-setting-docs.xml')
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/2319
