nm_utils_inet4_ntop() is public API of libnm. Also, it accepts a
%NULL buffer to use a static buffer. That is error prone and we
should not use such convenience behavior for our own code.
The kernel of Ubuntu 16.04 doesn't support IFLA_BR_VLAN_STATS_ENABLED.
If we want to run on such old kernels (which we probably do), we need to
detect that, and act accordingly.
This makes the macro more function like. Also, taking a pointer
makes it a bit clearer that this possibly changes the value.
Of course, it's not a big difference to before, but this
form seems slightly preferable to me.
This parameter really affects whether a candidate in @addresses_prune will be
considered or not. Since we already construct the prune list separately, this
parameter is at the wrong place.
This requires us to re-implement nm_platform_lookup_clone(). While the
function has a predicate callback that we could use for this purpose,
I will later add a separate predicate argument to
nm_platform_ip_address_get_prune_list(). When that happens, it would
be cumbersome to chain the two function pointers. Instead, reimplement
nm_platform_lookup_clone().
Follow the pattern of nm_platform_ip_route_sync(), which also accepts
the list of addresses that are potential candidates for removal.
This allows the caller to carefully construct the list of addresses
which are possibly removed, so that sync (possibly) only adds new
addresses.
It is beneficial to have both address families side by side.
A lot of operations are exactly the same, so it's preferable to see
that. Especially in the cases where they differ, it's preferable to see
how they differ (and why).
They ensure to consistently return -1, 0, 1. Also, I think they are
easier to understand.
What is in general hard to understand, whether a comparison sorts
ascending or descending. The macros maybe make that easier too, but it's
still confusing. That's why we have a test.
Pre-generate routes in the local table that are configured
by kernel when an ip-address is assigned to an interface.
This helps NM taking into account routes that are not to be deleted
when a connection is reapplied (or deactivated) on an interface instead of only
ignoring (when pruning) IPv6 routes having metric 0 and routes belonging
to the local table having 'kernel' as proto.
https://bugzilla.redhat.com/show_bug.cgi?id=1821787
@routes are the list of routes we want to configure. This contains
routes from DHCP and manual routes in the profile. It also contains
externally present routes, including the metric=0 routes in the local
table.
Trying to add an IPv6 route with metric zero adds instead a route with
metric 1024.
Usually, we wouldn't do that, because that route was present externally,
so it possibly is still present (in the platform cache) during sync and
we skip the addition. However, there is a race where the external route
might just disappear and we'd add a route with metric 1024.
Avoid that.
Userspace cannot add IPv6 routes with metric 0. Trying to do that, will
be coerced by kernel to route metric 1024. For IPv4 this is different,
and metric zero is commonly allowed.
However, kernel itself can add IPv6 routes with metric zero:
# ip -6 route show table local
local fe80::2029:c7ff:fec9:698a dev v proto kernel metric 0 pref medium
That means, we must not treat route metric zero special for most cases.
Only, when we want to add routes (based on user configuration), we must
coerce a route metric of zero to 1024.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/563
nm_platform_ethtool_init_ring() only has one caller. It's simpler to
drop the function and implement it at the only place where it is needed.
Maybe there could be a place for a function to initialize NMEthtoolRingState,
one option after the other. However, at the moment there is only one
user, so don't implement it.
This fixes various minor issues:
- the function had a NMPlatform argument, although the argument
is not used. Thus function merely operates on a NMEthtoolRingState
instance and shouldn't have a nm_platform_*() name.
- nm_platform_ethtool_init_ring() returned a boolean, but all
code paths (except assertion failures) returned success.
- as the function returned an error status, the caller was compelled
to handle an error that could never happen.
- the option was specified by name, although we already have a more
efficient way to express the option: the NMEthtoolID. Also, the
caller already needed to resolve the name to the NMEthtoolID, so
there was no need to again lookup the ID by name.
Rework qdisc synchronization. The previous implementation added all
known qdiscs and removed unneeded ones from platform; this had some
problems:
- kernel doesn't allow to add (with exclusive flag) a qdisc if one
with the same parent already exists;
- if we use the replace flag instead of add, then it becomes possible
to add a new qdisc with the same parent of an existing one. However
if the existing qdisc is of the same kind, kernel will try to to
change() it, which fails for some qdiscs (e.g. sfq).
- kernel doesn't allow to delete a qdisc with handle of zero because
that is the default qdisc and can only be replaced;
Fix that.
We already have NMEthtoolID to handle coalesce options in a way that is
convenient programmatically. That is, we can iterate over all valid
coalesce options (it's just an integer) and use that in a more generic
way.
If NMEthtoolCoalesceState names all fields explicitly, we need explicit
code that names each coalesce option. Especially since NMEthtoolCoalesceState
is an internal and intermediate data structure, this is cumbersome
and unnecessary.
Thereby it also fixes the issue that nm_platform_ethtool_init_coalesce() has a
NMPlatform argument without actually needing it.
nm_platform_ethtool_init_coalesce() does not operate on a NMPlatform
instance, and should not have the appearance of being a method of
NMPlatform.
Only in one moment we need the old and requested settings together:
during _ethtool_coalesce_set(). But for that we shouldn't track both
states in "NMEthtoolCoalesceState".
Simplify "NMEthtoolCoalesceState" to only contain one set of options.
By tracking less state, the code becomes simpler, because you don't
need to wonder where the old and requested state is used.
When we must synchronize IPv6 addresses, we compare the order of
addresses to set with what is currently set on platform. Starting from
addresses with lower priority, when a mismatch is found we remove it
from platform and also remove all following addresses, so that we can
re-add them in the right order.
Since kernel keeps addresses internally sorted by scope, we should
consider each scope separately in order to avoid unnecessary address
deletions. For example, if we want to configure addresses
fe80::1/64,2000::1/64 and we currently have on platform 2000::1/64,
it's not necessary to remove the existing address; we can just add the
link-local one.
Co-authored-by: Thomas Haller <thaller@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1814557
g_clear_pointer() would always cast the destroy notify function
pointer to GDestroyNotify. That means, it lost some type safety, like
GPtrArray *ptr_arr = ...
g_clear_pointer (&ptr_arr, g_array_unref);
Since glib 2.58 ([1]), g_clear_pointer() is also more type safe. But
this is not used by NetworkManager, because we don't set
GLIB_VERSION_MIN_REQUIRED to 2.58.
[1] f9a9902aac
We have nm_clear_pointer() to avoid this issue for a long time (pre
1.12.0). Possibly we should redefine in our source tree g_clear_pointer()
as nm_clear_pointer(). However, I don't like to patch glib functions
with our own variant. Arguably, we do patch g_clear_error() in
such a manner. But there the point is to make the function inlinable.
Also, nm_clear_pointer() returns a boolean that indicates whether
anything was cleared. That is sometimes useful. I think we should
just consistently use nm_clear_pointer() instead, which does always
the preferable thing.
Replace:
sed 's/\<g_clear_pointer *(\([^;]*\), *\([a-z_A-Z0-9]\+\) *)/nm_clear_pointer (\1, \2)/g' $(git grep -l g_clear_pointer) -i
It would be better if we would be able to use NMLinkType enum
as an index (e.g. into an array of LinkDesc structures). For that,
it is necessary that the enum is just consecutive numbers.
Don't assign special meaning to the enum. Also, this was only
used at two places, that we can solve differently.
Several macros are used to define function. They had a "_STATIC" variant,
to define the function as static.
I think those macros should not try to abstract entirely what they do.
They should not accept the function scope as argument (or have two
variants per scope). This also because it might make sense to add
additional __attribute__(()) to the function. That only works, if
the macro does not pretend to *not* define a plain function.
Instead, embrace what the function does and let the users place the
function scope as they see fit.
This also follows what is already done with
static NM_CACHED_QUARK_FCN ("autoconnect-root", autoconnect_root_quark)
and _nm_utils_inet6_ntop() instead of nm_utils_inet6_ntop().
nm_utils_inet4_ntop()/nm_utils_inet6_ntop() are public API of libnm.
For one, that means they are only available in code that links with
libnm/libnm-core. But such basic helpers should be available everywhere.
Also, they accept NULL as destination buffers. We keep that behavior
for potential libnm users, but internally we never want to use the
static buffers. This patch needs to take care that there are no callers
of _nm_utils_inet[46]_ntop() that pass NULL buffers.
Also, _nm_utils_inet[46]_ntop() are inline functions and the compiler
can get rid of them.
We should consistently use the same variant of the helper. The only
downside is that the "good" name is already taken. The leading
underscore is rather ugly and inconsistent.
Also, with our internal variants we can use "static array indices in
function parameter declarations" next. Thereby the compiler helps
to ensure that the provided buffers are of the right size.
- track the broadcast address in NMPlatformIP4Address. For addresses
that we receive from kernel and that we cache in NMPlatform, this
allows us to show the additional information. For example, we
can see it in debug logging.
- when setting the address, we still mostly generate our default
broadcast address. This is done in the only relevant caller
nm_platform_ip4_address_sync(). Basically, we merely moved setting
the broadcast address to the caller.
That is, because no callers explicitly set the "use_ip4_broadcast_address"
flag (yet). However, in the future some caller might want to set an explicit
broadcast address.
In practice, we currently don't support configuring special broadcast
addresses in NetworkManager. Instead, we always add the default one with
"address|~netmask" (for plen < 31).
Note that a main point of IFA_BROADCAST is to add a broadcast route to
the local table. Also note that kernel anyway will add such a
"address|~netmask" route, that is regardless whether IFA_BROADCAST is
set or not. Hence, setting it or not makes very little difference for
normal broadcast addresses -- because kernel tends to add this route either
way. It would make a difference if NetworkManager configured an unusual
IFA_BROADCAST address or an address for prefixes >= 31 (in which cases
kernel wouldn't add them automatically). But we don't do that at the
moment.
So, while what NM does has little effect in practice, it still seems
more correct to add the broadcast address, only so that you see it in
`ip addr show`.
