Make it off by default. Point out it's deprecated in a config summary.
It's not maintained upstream. There's probably not much justification for
using it any more and we'd like to remove it at some point.
https://issues.redhat.com/browse/RHEL-24622
Make it off by default. Point out it's deprecated in a config summary.
It's not maintained upstream. There's probably not much justification for
using it any more and we'd like to remove it at some point.
https://issues.redhat.com/browse/RHEL-24622
When we build a copr image, we run the "nm-copr-build.sh" script.
That script, should honor "LTO=0|1|" to explicitly enable/disable
LTO. Since the copr script only builds a SRPM, which then gets build
we need that the default LTO flag in the SRPM is templated.
Fixes: 0566e9dc63 ('contrib: support disabling "LTO" in "nm-copr-build.sh"')
"build_clean.sh" (and "build.sh") scripts can both create a source
tarball (via `make dist`/`make distcheck`), an SRPM (and a spec file),
or build RPMs from the SRPM.
Note that the generated spec file has various options, like
%bcond_without nmtui
%bcond_without debug
%bcond_without test
When building an RPM from the SRPM, you can specify the "--with" or
"--without" option for rpmbuild. This is also what the "-w" / "-W" options
for "build_clean.sh" do.
However, the SRPM still has the intrinsic defaults, and if you later
build an RPM from it, you would have to pass "--with" / "--without"
to rpmbuild.
Often that is not conveniently possible, for example, when you build the
SRPM in koji.
Extend the scripts so that also the defaults for "-w debug" and "-w
test" can be specified when generating the SRPM. You can do that with
the new options "--default-for-{debug,test}" to "build_clean.sh".
Alternatively, it suffices to specify the previously supported
"-w" / "-W" options. That way, we will pass those options to rpmbuild,
but also set them as defaults in the generate spec file. The new
options "--default-for-{debug,test}" are only needed if you want
the default in the spec file to be different then what you use
when creating the SRPM.
By default, "build_clean.sh" script likes to automatically add "-w test"
-- unless the user specified "-w test" or "-W test" on the command line.
That is mostly fine. However, the spec file has an internal default for the
"test" option. So if you want to use the default that gets determined
by the spec file, then we should suppress that automatism.
Add a new `main.rc-manager=auto` setting, that favours to use
systemd-resolved (and not touch "/etc/resolv.conf" but configure
it via D-Bus), or falls back to `resolvconf`/`netconfig` binaries
if they are installed and enabled at compile time.
As final fallback use "symlink", like before.
Note that on Fedora there is no "openresolv" package ([1]). Instead, "systemd"
package provides "/usr/sbin/resolvconf" as a wrapper for systemd-resolved's
"resolvectl". On such a system the fallback to resolvconf is always
wrong, because NetworkManager should either talk to systemd-resolved
directly or not but never call "/usr/sbin/resolvconf". So, the special handling
for resolvconf and netconfig is only done if NetworkManager was build with these
applications explicitly enabled.
Note that SUSE builds NetworkManager with
--with-netconfig=yes
--with-config-dns-rc-manager-default=netconfig
and the new option won't be used there either. But of course, netconfig
already does all the right things on SUSE.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=668153
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
When doing a release, we should care about the checksum of the tarball.
Log all of them... also, because fedpkg uses sha512, ftpadmin@gnome uses
sha256, etc.
Nowadays, we should prefer "/run" over "/var/run". When not specifying
during ./configure, autotools however still defaults to "/var/run".
This default is also visible in the pre-generated documenation, for
example `man NetworkManager.conf` says
Unless the symlink points to the internal file /run/NetworkManager/resolv.conf,
in which case the ...
The functionality of the ibft settings plugin is now handled by
nm-initrd-generator. There is no need for it anymore, drop it.
Note that ibft called iscsiadm, which requires CAP_SYS_ADMIN to work
([1]). We really want to drop this capability, so the current solution
of a settings plugin (as it is implemented) is wrong. The solution
instead is nm-initrd-generator.
Also, on Fedora the ibft was disabled and probably on most other
distributions as well. This was only used on RHEL.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1371201#c7
This removes libnm-glib, libnm-glib-vpn, and libnm-util for good.
The it has been replaced with libnm since NetworkManager 1.0, disabled
by default since 1.12 and no up-to-date distributions ship it for years
now.
Removing the libraries allows us to:
* Remove the horrible hacks that were in place to deal with accidental use
of both the new and old library in a single process.
* Relief the translators of maintenance burden of similar yet different
strings.
* Get rid of known bad code without chances of ever getting fixed
(libnm-glib/nm-object.c and libnm-glib/nm-object-cache.c)
* Generally lower the footprint of the releases and our workspace
If there are some really really legacy users; they can just build
libnm-glib and friends from the NetworkManager-1.16 distribution. The
D-Bus API is stable and old libnm-glib will keep working forever.
https://github.com/NetworkManager/NetworkManager/pull/308
autotools build has/had a bug, where ibft test files would only be disted
if the ibft plugin was enabled.
Regardless of that, `build_clean.sh --release` is our suggested way to
create a release tarball. It should always enable the ibft plugin.
It didn't do so, due to a bug.
Seems rpmbuild does not honor the latest occurance with
--with test --without test
to disable tests. Work around that.
Fixes: ad850c4f03
(cherry picked from commit cc8c207120)
In general, when we build a package, we want no compiler warnings
and all unit tests to pass.
That is in particular true when building a package for the distribution
in koji. When builing in koji, we (rightly) cannot pass rpmbuild options, so
the default whether tests/compiler-warnings are fatal matter very much.
One could argue: let's have the tests/compiler-warnings fatal and fail the build.
During a build in koji for a Fedora release, we want them all pass. And if somebody
does a manual build, the person can patch the spec file (or use rpmbuild
flags).
However, note how commit "f7b5e48cdb contrib/rpm: don't force fatal warnings
with tests" already disabled fatal compiler warnings. Why? It seems
compiler warnings should be even more stable than our unit tests, as long
as you target a particular Fedora release and compiler version. So this
was done to support rebuilding an SRPM for a different Fedora release,
or to be more graceful during early development phase of a Fedora
release, where things are not as stable yet.
The exactly same reasoning applies to treating unit-tests failures as fatal.
For example, a recent iproute2 issue broke unit tests. That meant, with
that iproute2 release in build root, the NetworkManager RPM could not be built.
Very annoying.
Now:
- if "test" is enabled, that means both `make check` and compiler warnings
are treated fatal. If "test" is disabled, `make check` and compiler
warnings are still done, just not fatal.
- "test" is now disabled by default via the spec file. They are not fatal
when building in koji or when rebuilding the package manually.
- tests can be enabled optionally. Note that the "build_clean.sh"
script enables them by default. So, a user using this script would
need to explicitly "--without test".
(cherry picked from commit ad850c4f03)
The correct way to create a tarball for release is
./contrib/fedora/rpm/build_clean.sh -r
Just ensure to issue this from a clean shell environment.
(cherry picked from commit 5894da67dc)
Will be used by CI trigger to name packages that are build during testing
of a github pull request with the corresponding pull request ID.
"build_clean.sh" now supports a command line option -s|--snapshot. But the
same paramter can also be set via $NM_BUILD_SNAPSHOT environment
variable. Using the environment variable is useful to support older versions
and new versions of "build_clean.sh", so that the script can just ignore the
snapshot setting if it doesn't understand it yet.
Even Gentoo disables this plugin since before 0.9.8 release
of NetworkManager. Time to say goodbye.
If somebody happens to show up to maintain it, we may resurrect it
later.
If "$distro_plugins=ifnet" was set, configure.ac would use that
to autodetect --with-hostname-persist=gentoo. Replace that autodetect
part by checking for /etc/gentoo-release file.
Previously, the --quick option only mattered when creating
the source tarball, to run `make dist` instead of the slower
`make distcheck`.
Extend its meaning to also skip unit tests while building the RPM.
You still can enable them with
$ ./contrib/fedora/rpm/build_clean.sh -Q -w test
"build_clean.sh" is used to generate a distribution tarball. The tarball
contains pregenerated man pages with default values for paths, which in
turn depend on the configure options when creating the tarball.
Previously, the man page would have paths like "usr/local/etc/NetworkManager/...",
which doesn't seem the best choice for a default man page.
Explicitly set the installation paths.
Also, --disable-dependency-tracking in this mode. It may speed up the
build.
When we create a source tarball, documentation and other generated files
are disted. Those files depend on the configure options when creating
the tarball. For example, the generated man pages contain the compile time
configurable default values.
For that reason, it is generally better to regenerate the documentation when
building NetworkManager. However, let's set explict configure options to
have a more reproducible way to generate the tarball.
When doing a release, you should not just call `make dist`. Instead, the
proper way of creating an official source tarball is:
$ ./contrib/fedora/rpm/build_clean.sh --srpm
- `make dist` requires --enable-gtk-doc --enable-introspection --with-libnm-glib
- --enable-gtk-doc requires --enable-introspection
- --with-nmcli requires either --enable-introspection or pregenerated
settings-docs.c files from the dist tarball. It does not require
--enable-gtk-doc.
There is a bit of a problem in that --enable-introspection requires
now xsltproc. However, gobject-introspection does itself not depend
on xsltproc. So, more correct might be a special --enable-doc argument,
that combines --enable-introspection --with-xsltproc. Anyway, that
seems to make it more complicated then it already is so just implicitly
(and surprisingly?) require xsltproc with --enable-introspection.
https://bugzilla.gnome.org/show_bug.cgi?id=775003
Presiouvly, when there was a tarball file in the top git-tree, it would
have been choosen and no easy way to overwrite the decision to build
from a git-archive. Now you can safely build current HEAD by simply calling
./contrib/fedora/rpm/build_clean.sh -g
Contrary to the regular build which calls `make dist`, this doesn't
require a clean working copy and no need to purge it with git-clean.
Also add a new conditional "debug" to enable more assertions and
more logging, which is disabled by default.
Also add a conditional "test" to disable running the unit tests
(make check) while building the package.
http://rpm.org/wiki/PackagerDocs/ConditionalBuilds
Up to now, the "include" directory contained (only) header files that were
used project-wide by libs, core, clients, et al.
Since the directory now also contains a non-header file, the "include"
name is misleading. Instead of adding yet another directory that is
project-wide, with non-header-only content, rename the "include"
directory to "shared".
Before, build_clean.sh always required building all NetworkManager
and doing another `make distcheck` before calling rpmbuild.
That is still a good idea, to ensure that we get a proper build.
For some quick testing however, lets speed this up with a new
--dist argument that only calls `make dist`.
Signed-off-by: Thomas Haller <thaller@redhat.com>
