For certain types of connection as PPP and WWAN the IP interface is
created during stage3 (IP config) but we are setting the firewall zone
at the beginning of stage3 and thus the zone is only set on the
underlying interface.
Add a check at the start of IP check phase to ensure that the firewall
zone is set again if the device interface is different from IP
interface.
https://bugzilla.redhat.com/show_bug.cgi?id=1110465
Depending on the network and the values of the 'dad_transmits' and
'retrans_timeout_ms' sysctls, DAD for the IPv6LL address can take
quite a while. Obviously there must be some upper bound on the
timeout, but 5 seconds seems a bit low. In this case it was observed
to be ~12 seconds but the sysctl values are unknown. In any case,
we can't predict the network/config so being a bit more lenient here
makes sense.
https://bugzilla.redhat.com/show_bug.cgi?id=1101809
Always take a reference to the manager when scheaduling an asynchronous
operations. In fact, all callers want to keep the manager alive as long
as there are operations in progress.
Refactor NMFirewallManager to have consistent semantics about
asynchronous calls.
- the callback is always invoked exactly once, but never
synchronously when starting the operation.
- while cancelling the request, the callback is invoked
synchronously with respect to the cancel operation.
- you can cancel a request once (and once only).
- you cannot cancel the request once the callback is invoked.
- when disposing the object with requests pending, the
callbacks are invoked synchronously.
- Add a callback argument to nm_firewall_manager_remove_from_zone().
Otherwise, the user never knows whether a call is still pending and
cancellable (as complete operations cannot be cancelled).
In fact, it makes no sense trying to cancel a call if you don't care
about when it completes.
- get rid of PENDING_CALL_DUMMY. The dummy callback allows cancellation
any number of times. We want to catch wrong usage by asserting that an
operation is only cancelled once.
- nm_firewall_manager_cancel_call() doesn't need the manager argument.
Either the call-id is valid (and has a valid pointer to the manager),
or there is a bug and it is a dangling pointer.
Give it a proper NMFirewallManager* prefix to make it clear where the type belongs.
Also, we will add a similar callback for nm_firewall_manager_remove_from_zone(),
so reflect that in the name.
If SIM in a modem is locked, ModemManager can't initialize SupportedIpFamilies
and NetworkManager will set the property to 0. ModemManager then updates the
property after the modem is unlocked, but NetworkManager did not watch changes
to the property. And that resulted in a connection failure:
(ttyUSB1): Failed to connect 'O2 Internet': Connection requested IPv4 but IPv4 is unsuported by the modem.
(ttyUSB1): device state change: prepare -> failed (reason 'modem-init-failed') [40 120 28]
https://bugzilla.redhat.com/show_bug.cgi?id=1263959
Got a crash with unknown reason on nm-1-0 branch. It's unclear why,
but the reason could be that a lease in client_receive_advertise()
was cleared, but not its timers.
Backtrace from nm-1-0 branch (note that the systemd code where the crash
happend is different, but similar):
#0 sd_event_source_unref (s=0xf5c007e8fb894853) at dhcp-manager/systemd-dhcp/nm-sd-adapt.c:53
#1 0x0000555555682340 in client_timeout_t1 (s=<optimized out>, usec=<optimized out>, userdata=0x5555559f5240)
at dhcp-manager/systemd-dhcp/src/libsystemd-network/sd-dhcp6-client.c:451
#2 0x00005555556a078f in time_ready (source=0x5555559f3c20) at dhcp-manager/systemd-dhcp/nm-sd-adapt.c:146
#3 0x00007ffff4a481b3 in g_timeout_dispatch () from /lib64/libglib-2.0.so.0
#4 0x00007ffff4a4779a in g_main_context_dispatch () from /lib64/libglib-2.0.so.0
#5 0x00007ffff4a47ae8 in g_main_context_iterate.isra.24 () from /lib64/libglib-2.0.so.0
#6 0x00007ffff4a47dba in g_main_loop_run () from /lib64/libglib-2.0.so.0
#7 0x0000555555597073 in main (argc=1, argv=0x7fffffffe2b8) at main.c:512
Equivalent upstream systemd patch:
https://github.com/systemd/systemd/pull/1332f89087272bhttps://bugzilla.redhat.com/show_bug.cgi?id=1260727
sd_event_source is either used for sd_event_add_io() or sd_event_add_time().
Depending on the use, different fields of the struct are relevant. Refactor
the struct to have a union.
This reduces the size of the struct, but more importantly, it makes it
clear which fields are used in which context.
Systemd supports omitting the output source argument. In this case,
the created event source is floating and the reference count
is handled properly.
We have however no callers that make use of that functionality, so
instead of implementing floating references, assert that we don't
need it.
This isn't a change in behavior, because previously the could would just
SEGFAULT if a caller didn't want to take ownership of the created event.
Especially systemd, which makes use of the error argument for logging, likes
to represent errors as negative numbers. We hence must invert a negative error
code to get the real errno.
NetworkManager set wpa_supplicant's fragment_size option to 1300. But if MTU
was lower, wpa_supplicant failed with "l2_packet_send - sendto: Message too
long" due to fragmentation of EAP-TLS or EAP-PEAP packets.
Actually, MTU has to be 14 bytes bigger than the "fragment_size" parameter.
Ideally, wpa_supplicant would take MTU in the account and adjust the
fragmentation limit accordingly. See discussion in
http://lists.shmoo.com/pipermail/hostap/2015-August/033546.htmlhttps://bugzilla.gnome.org/show_bug.cgi?id=755145
- Reorder statements, to first g_return_if_fail() and log state-change.
- Also log a message when leaving _set_state_full() early due to missing firmware.
g_dbus_message_get_interface() can return NULL in the message filter,
for example when the client does:
#!/usr/bin/env python
import dbus
bus = dbus.SystemBus()
proxy = bus.get_object("org.freedesktop.NetworkManager",
"/org/freedesktop/NetworkManager")
proxy.foobar()
Use g_strcmp0() to compare the interface and member names.
Fixes: 34ba4e14b8
While an NMExportedObject is exported (i.e. registered at NMBusManager),
it has a list of GDBusInterfaceSkeleton interfaces. The properties of
the nm-object are bound to the interfaces and the signals connected.
Previously, when unexporting the NMExportedObject, we would only unref
the interfaces, but not explicitly disconnect. As there is no guarantee
that the lifetime of the interfaces is shorter then the lifetime of the
nm-object, hence, explicitly disconnect.
Clone the connection upon activation. This makes it safe for the user
to modify the original connection while it is activated.
This involves several changes:
- NMActiveConnection gets @settings_connection and @applied_connection.
To support add-and-activate, we constructing a NMActiveConnection with
no connection set. Previously, we would set the "connection" field to
a temporary NMConnection. Now NMManager piggybacks this temporary
connection as object-data (TAG_ACTIVE_CONNETION_ADD_AND_ACTIVATE).
- get rid of the functions nm_active_connection_get_connection_type()
and nm_active_connection_get_connection_uuid(). From their names
it is unclear whether this returns the settings or applied connection.
The (few) callers should figure that out themselves.
- rename nm_active_connection_get_id() to
nm_active_connection_get_settings_connection_id(). This function
is only used internally for logging.
- dispatcher calls now get two connections as well. The
applied-connection is used for the connection data, while
the settings-connection is used for the connection path.
- needs special handling for properties that apply immediately
when changed (nm_device_reapply_settings_immediately()).
Co-Authored-By: Thomas Haller <thaller@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=724041
NMSecretAgent (and in turn NMAgentManager) used the @connection argument both
for the connection data, but also for the connection path. Detangle these, and
accept the path separate from the connection.
This makes NMSecretAgent and NMAgentManager truly operate on a plain
NMConnection, without the non-obvious requirement, that the path of the
connection must be set.
This now gives every logging line of a NMVpnConnection
a fully descriptive prefix.
Especially for non-debug logging, this looks a bit verbose
and repetitive, so we could suppress the prefix in that case.
I still add it because I think the verbose information does help
during debugging.
Refactor agent-manager to always invoke the complete function for
nm_agent_manager_get_secrets().
In general, the complete function is always invoked asnychronously
when starting the operation. On the other hand, when cancelling the
operation or disposing the manager with pending operations, we now
(always) synchronously invoke the callback.
This makes it simpler for the user to reliably cancel the request
and perform potential cleanup.
This behavior bubbles up through NMSettingsConnection and NMActRequest,
and other callers that make directly or indicrectly make use of
nm_agent_manager_get_secrets().
Instead of having the call_id of type guint32, make it an (opaque)
pointer type.
This has the advantage of strong typing and avoids the possiblity
of reusing an invalid integer (or overflow of the call-id counter).
OTOH, it has the disadvantage, that after a call_id is disposed,
it might be reused for future invocations (because malloc might
reuse the memory).
In fact, it is always an error to use a call_id that is already
completed. This commit also adds assertions to the cancel() calls
that the provided call_id is a pending call. Hence, such a bug
will be uncovered by assertions (that only might not tigger in
certain unlikely cases where a call-id got reused).
Note that for NMAgentManager, save_secrets() and delete_secrets()
both returned a call_id. But they didn't also provide a callback when
the operation completes. So the user trying to cancel such a call,
cannot know whether the operation is still in process and he cannot
avoid triggering an assertion.
Fix that by not returning a call-id for these operations. No caller
cared about it anyway.
For NMSettingsConnection, also track the internally scheduled requests
for so that we can cancel them on dispose.
