Patch from Dave Woodhouse:
* src/NetworkManagerSystem.h
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerSlackware.c
- New nm_system_device_add_ip6_link_address() function to add link-local
address on an interface. Stubbed in Debian, Gentoo, and Slackware.
* src/backends/NetworkManagerRedHat.c
- (nm_system_device_add_ip6_link_address): implement
- (nm_system_device_flush_addresses): revert to previous behavior of
flushing all addresses
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@432 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- #rh147661# Don't send kernel version in DHCP requests
* src/NetworkManagerSystem.h
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
- Remove the nm_system_device_run_dhcp() and nm_system_device_stop_dhcp()
functions, they are no longer used anyway
* src/backends/NetworkManagerRedHat.c
- (nm_system_device_flush_addresses): only flush "scope global" and "scope site"
addresses in an attempt to keep IPv6 local-scope addresses around
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@428 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* dhcpcd/client.c
- Rework the DHCP client code to be much less chatty when
it receives non-DHCP UDP packets during the DHCP run
(reported by and preliminary patches from Bill Moss)
* Move wireless scanning to a separate thread. This thread forwards the
results to the main thread when done where they are integrated into
the device's access point lists. This keeps the main thread (which
does all the DBUS communication) from being blocked for long periods
of time by wireless scanning.
* Make state modification an idle routine in the main loop, and trigger
state changes rather than polling for them.
* src/backends/NetworkManagerGentoo.c
- Fix up invalid C90 code (reported by Christoph Ruessler)
* src/NetworkManagerDevice.c
- Revert IPv6 patch for wired devices from 2004-12-22 for
router advertisements, causing problems and infinite loop
during "best" device determination due to link going up/down
(reported by Bill Moss)
Apply patch from Peter Jones
* src/NetworkManagerDevice.c
- Shortcut for link-checking for ipw2x00 cards
- Split out association check into separate routine
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@360 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Ad Ad-Hoc networking mode support. In Ad-Hoc mode, we only try to get
link-local addresses instead of doing DHCP.
* In the panel applet, there's a new "Create new Wireless Network..." item
* The panel applet also sticks around now even if NetworkManager dies, but
it doesn't hide its icon when NM isn't around. Not hiding the icon is
a bug, I'll fix that later.
* We also don't use 'nscd' anymore in the RH backend, it was impeding name
lookups after a switch rather than actually doing them.
* Clean up some of those warnings in nm_ap_list_* functions
* Delay between scans changed to 15s instead of 10s
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@342 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patch from Tom Parker
* Add autoip/Link Local Addressing support when we fail to get a DHCP
address
* Longer pause after setting ESSID on cards that support a larger number
of channels to give the card time to find the right channel
* Add system hook to restart mDNSResponder (or whatever the local implementation
of Multicast DNS is) when we activate interfaces
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@341 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Major rework of the DHCP code, taking some cues from pump. We don't
write raw Ethernet packets anymore, which simplifies the code quite
a bit. The new code should be more robust, not hang in recvfrom()
as much, and generally work better. This also means that we need
to force HAL/dbus to use a created GMainContext rather than the
default context, since having the DHCP renew/rebind thread using
its own GMainContext seemed to give dbus a fit. There is also more
debugging information printed from the DHCP loop to help with future
problems.
* Also, if the DHCP server doesn't give us the "routersOnSubnet" option,
assume that the default gateway should be the DHCP server.
Patch from Matthew Schick <matt oss-institute org>
* src/backends/NetworkManagerGentoo.c
- Fix compilation error due to missing "ip4_broadcast"
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@336 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* NEWS
src/NetworkManagerDevice.[ch]
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSlackware.c
- Add support for grabbing and using a broadcast address
from system config files
- Some Gentoo backend fixes for grabbing network config
- Fix LOG_WARN->LOG_WARNING
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@239 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/NMWirelessApplet.c
- Add function to print out applet_state in a readable
manner
* src/NetworkManager.c
- (main): Don't segfault when nm_dbus_init() fails, we had
a left-over call to hal_shutdown() into which we passed NULL
* src/NetworkManagerAP.c
- (nm_ap_set_essid): Allow NULL essids
* src/NetworkManagerAPList.[ch]
- More use of nm_ap_list_[un]lock ()
- (nm_ap_list_get_ap_by_essid): don't warn when looking for a NULL
network/essid, just return nothing. Also skip over NULL
essid access points in the list when searching
- (nm_ap_list_get_ap_by_address): new function
- (nm_ap_list_update_network): set the access point's key source to
NULL when the key returned from NetworkManagerInfo is NULL or
of 0 length
- nm_ap_list_update_keys() -> nm_ap_list_update_properties(), and
copy timestamp over too
- (nm_ap_list_copy_essids_by_address): new function, attempt to
find the correct ESSID for a blank-essid access point by searching
through another list and matching access point MAC addresses
- (nm_ap_list_diff): exclude blank-essid access points from the diffs
* src/NetworkManagerDbus.c
- (nm_dbus_nm_set_active_device): deal with random networks the user
may specify. This is mainly for access points that don't
broadcast their essid. So if the user tells us to associate with
some random ESSID that's not in our access point list, we find
out if the access point does in fact exist (by attempting association
and then matching that access point's MAC address with the essid the
user gave us) and then we switch to it.
- (nm_dbus_devices_handle_request): don't add blank-essid access points
to the returned list of networks for the "getNetworks" method
* src/NetworkManagerDevice.[ch]
- Extra debugging info for link detection
- (nm_device_ap_list_get_ap_by_address): new function, return an AP
based on MAC address
- (nm_device_get_path_for_ap): ignore blank-essid access points
- (nm_device_wireless_network_exists): new function, find out whether
a random ESSID exists by attempting to associate with it
- (nm_device_do_normal_scan): allow blank-essid access points in our
device list as long as they have an AP MAC address we can use.
Also send WirelessNetwork[Dis]Appeared signals for non-active
devices too. Lets the applet update more frequently.
* src/backends/NetworkManagerGentoo.c
- Patch from: Robert Paskowitz
- Update backend code for Gentoo
- Implement nm_system_device_update_config_info ()
* test/nmclienttest.c
- (set_network_device): new function, takes a command-line argument
and tells NetworkManager to use that wireless network
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@222 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* TODO
- Remove bit about static IP address support
* src/NetworkManagerUtils.c
- (nm_spawn_process): Add some error reporting
* src/NetworkManagerDevice.c
- (nm_device_activation_configure_ip): hook up to the static config
routines in the backends
* src/backends/NetworkManagerRedHat.c
- (nm_system_device_update_config_info): use shvar.c routines to
parse the config file iformation, not our own
- (nm_system_device_setup_static_ip4_config): new function, based
heavily on 'ifup' script and 'ipcalc' tool code. Set up a device
with a static IP address and gateway
* src/backends/shvar.[ch]
- Parser (filched from initscripts package) for ifcfg-* files
* src/backends/NetworkManagerSystem.h
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerSlackware.c
- Stub nm_system_device_update_config_info() and nm_system_device_setup_static_ip4_config()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@212 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/no-networkmanager.png
panel-applet/Makefile.am
panel-applet/NMWirelessApplet.c
- Add a "NetworkManager not running" icon and use it
- Use new consolidated GConf keys rather than Preferred/Trusted
* TODO: update
* info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfoDbus.[ch]
info-daemon/NetworkManagerInfoPassphraseDialog.c
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
- Add a "getNetworkTrusted" dbus method
- "WirelessNetworkUpdate" signal now sent rather than
"PreferredNetworkUpdate/TrustedNetworkUpdate" signals
- Start freeing some dbus errors (not completed yet)
* info-daemon/passphrase.glade
- Remove the "don't show" hints for pager and taskbar
- Add a title since its going to be in the taskbar
* src/NetworkManager.[ch]
src/NetworkManagerAPList.[ch]
- There are now no longer two separate lists of wireless networks,
but one list where each network is "trusted" or not trusted
* src/NetworkManagerAP.[ch]
- Add get/set "trusted" accessors and data bit
* src/NetworkManagerDbus.[ch]
- Add function to get "trusted" status of a network from NetworkManagerInfo
- Trap new WirelessNetworkUpdate signal rather than old separate signals
* src/NetworkManagerDevice.[ch]
- Add per-device config data (ip4 addr, gateway, netmask) and accessors
- (nm_device_new): Get device config from backend when initializing devices
- (nm_device_activation_worker): Split out device configuration on
activation to deal with static/dynamic IP differences, and try encryption
fallbacks on a device if the encryption method for the best AP is not good
- (nm_device_update_best_ap): convert to new consolidated access point lists from
NetworkManagerInfo, and copy over latest NMI info to best_ap when setting it
* src/NetworkManagerWireless.c
- libgcrypt code wasn't converting the MD5 digest to an ascii string, fix it
* src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSystem.h
- (nm_system_device_update_config_info): Add function to get device configuration
from system data in ifcfg-* files
* src/backends/NetworkManagerDebian.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerSlackware.c
- Add stub functions for getting device configuration
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@131 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Remove 'debug' extern global from all files since we now
use syslog()
* src/NetworkManager.[ch]
- Break out routine that get the net.interface property from HAL,
removing that logic from nm_create_device_and_add_to_list()
- (nm_create_device_and_add_to_list): make this a bit more general so
it doesn't do the talking to HAL. Also add arguments to facilitate
the create of test devices.
- (nm_data_mark_state_changed): rename from nm_data_set_state_modified()
- (nm_data_new, main, nm_print_usage): add new argument "--enable-test-devices"
which makes NetworkManager listen for dbus commands to create test
devices, which have no backing hardware. Use when you're on a plane
for example, and/or forgot your wireless card at home. Test devices
_cannot_ be created unless NM is started with --enable-test-devices.
* src/NetworkManagerDbus.[ch]
- New "getLinkActive" method for devices
- New "setLinkActive" method for devices (only works on test devices)
- New "createTestDevice" method on NetworkManager object to create a test
device of a specified type (ie wired, wireless). UDI is created from
scratch, as is the interface name. Only works when NM is started with
--enable-test-devices switch.
- New "removeTestDevice" method on NetworkManager object which removes a
test device. Only works when NM is started with --enable-test-devices
* src/NetworkManagerDevice.[ch]
- Logic to facilitate test devices. Add variables to NMDevice struct to indicate
whether a device is a test device or not, and what its link status is.
- Deal with test devices in most functions. For those that work directly on hardware
special-case test devices.
- (nm_device_new): don't create a test device if test devices weren't enabled on the
command-line.
- (nm_device_update_link_active): split out logic for wired and wireless device link
checking to separate functions to facilitate test device link checking.
- (nm_device_set_enc_key): Since some drivers for wireless cards are daft and
don't make a distinction between System Authentication and Encryption
(namely Cisco aironet), we use Open System auth when setting a WEP key
on the card. We don't deal with Shared Key auth yet.
- (nm_device_activation_worker): split the activation cancel check logic out into
a separate routine nm_device_activation_cancel_if_needed()
- (nm_device_activation_signal_cancel): rename from nm_device_activation_cancel()
- (nm_device_fake_ap_list): Test wireless devices obviously cannot scan, so create
a list of fake access points that they can "see"
- (nm_device_is_test_device): return whether or not a device is a test device
* src/NetworkManagerPolicy.c
- (nm_policy_get_best_device): attempt to deal with wireless network selection,
previously if you "locked"/forced NM to use a wireless device but then
selected a wireless network for NM to use, it would switch to a wired device.
So, if the active device is wireless and it has a "forced" best AP, use it
if the "forced" best AP is still valid
- (nm_state_modification_monitor): deal with NULL best devices, for example
there were no usable network devices, or the last one was removed
* src/backends/NetworkManager*.c
- Deal with test devices, mostly just return success for operations like getting
a DHCP address
* test/nmtestdevices.c
- Test tool to create/remove/link-switch test devices
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@112 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSystem.h
- Implement preliminary Gentoo support, adding a
nm_system_init function to the backend specification
* configure.in
- Distribution auto-detection, lowercase any user-fed
distribution names
* initscript/.cvsignore
initscript/Makefile.am
initscript/RedHat/Makefile.am
initscript/RedHat/NetworkManager
initscript/Gentoo/Makefile.am
initscript/Gentoo/NetworkManager
- Refactored initscript code separately for each
distribution
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@64 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
src/Makefile.am
src/NetworkManagerDevice.c
src/NetworkManager.c
src/NetworkManagerUtils.[ch]
src/backends/NetworkManagerSystem.h
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerGentoo.c
- Refactor system-specific code into separate backends for
each distribution
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@62 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
