NM_HASH_OBFUSCATE_PTR() is some snake-oil to not log raw pointer values.
It obviously makes debugging harder.
But we don't need to generate differently obfuscated pointer values.
At least, let most users use the same obfuscation, so that the values
are comparable.
Routes of type blackhole, unreachable, prohibit don't have an
ifindex/device. They are thus in many ways similar to routing rules,
as they are global. We need a mediator to keep track which routes
to configure.
This will be very similar to what NMPRulesManager already does for
routing rules. Rename the API, so that it also can be used for routes.
Renaming the file will be done next, so that git's rename detection
doesn't get too confused.
So far, certain NMObject types could not have an ifindex of zero. Hence,
nmp_lookup_init_object() took such an ifindex to mean lookup all objects
of that type.
Soon, we will support blackhole/unreachable/prohibit route types, which
have their ifindex set to zero. It is still useful to lookup those routes
types via nmp_lookup_init_object().
Change behaviour how to interpret the ifindex. Note that this also
affects various callers of nmp_lookup_init_object(). If somebody was
relying on the previous behavior, it would need fixing.
_vt_cmd_obj_is_alive_ipx_route() is called by nmp_object_is_alive().
Non-alive objects are not put into the cache.
That certainly makes sense for RTM_F_CLONED routes, because they are
generated ad-hoc during the `ip route get` request.
Checking for the ifindex is not necessary. For one, some route types
(blackhole, unreachable, prohibit) don't have an ifindex. Also, the
purpose of _vt_cmd_obj_is_alive_ipx_route() is not to validate the
object. Just don't create objects without an ifindex, if you think the
route needs an ifindex. Checking here is not useful.
We also don't check that other fields like rt_source are valid, so there
is no need to do it for the ifindex either.
Currently, for NMPlatformIP[46]Route always has a gateway, even if it's
possibly set to 0.0.0.0/::. Not sure whether kernel has a further
distinction between no-gateway and all-zero gateway.
Anyway. For us, a gateway of 0.0.0.0/:: means the same as having no
gateway. We cannot differentiate the two (nor do we need to).
Don't print that in nm_platform_ip[46]_route_to_string().
Also, because we are going to add blackhole route types, which cannot
have a next-hop. But we do this change for all routes types, because
it makes sense in general (and also what `ip route show` prints).
The variable with this purpose is usually called "IS_IPv4".
It's upper case, because usually this is a const variable, and because
it reminds of the NM_IS_IPv4(addr_family) macro. That letter case
is unusual, but it makes sense to me for the special purpose that this
variable has.
Anyway. The naming of this variable is a different point. Let's
use the variable name that is consistent and widely used.
_nm_ip_route_attribute_validate_all() validates all attributes together.
As such, it calls to nm_ip_route_attribute_validate(), which in turn
validates one attribute at a time.
Such full validation needs to check that (potentially conflicting)
attributes are valid together. Hence, _nm_ip_route_attribute_validate_all()
needs again peek into the attributes.
Refactor the code, so that we can extract the pieces that we need and
not need to parse them twice.
First of all, all of NMVariantAttributeSpec is internal API. We only
expose the typedef itself as public API, but not its fields nor
their meaning. So we can change things.
Change "str_type" to "type_detail", so that it can work for any kind of
attribute, not only for strings. Usually, we want to avoid special
cases and treat all attributes the same, based on their GVariant type.
But sometimes, it is necessary to do something special with an
attribute. This is what the "type_detail" encodes, but it's not only
relevant for strings.
Usually the normalization (canonicalize) and validation of the IP
address string both requires to parse the string. As we always do
validation first, we can use the parsed address and don't need to parse
it a second time.
Order the fields by their size, to minimize the alignment gaps.
I guess, that doesn't matter because the alignment of the heap
allocation is larger than what we can safe here. Still, there is
on reason to do it any other way.
Also, it's not possible via API to set family/prefix to values outside
their range, so an 8bit integer is always sufficient. And we don't want
that invariant to change. We don't ever want to allow the caller to set
values that are clearly invalid, and will assert against that early (g_return()).
Point is, we can do this and there is no danger of future problems.
And even if we will support larger values, it's all an implementation
detail anyway.
`git bisect run` is peculiar about the exit code:
error: bisect run failed: exit code 134 from '...' is < 0 or >= 128
If we just "exec" the test, it usually will fail on an assert. That results
in SIGABRT or exit code 134. So out of the box that is annoying with
git-bisect.
Work around that and let the test wrapper always coerce any test failure
to exit code 1.
In systemd, it's common that a D-Bus activatable service references
`SystemdService=dbus-$BUSNAME.service` instead the real service name.
Together with an `[Install].Alias=dbus-$BUSNAME.service` directive,
this allowed to enable/disable D-Bus activation without uninstalling the
service altogether ([1]).
Currently, when we install the RPM then `nm-priv-helper.service` is not
enabled, consequently the alias is not created, and D-Bus activation
does not work. I guess, we should fix that by enabling the service in
the %post section or via a systemd preset? Dunno.
Anyway. It seems that nm-priv-helper.service is more of an
implementation detail of NetworkManager. It makes not sense for the user
to interact directly, or to enable/disable D-Bus activation (because
that is how it works).
So, drop the alias.
See-also: [1] https://docs.fedoraproject.org/en-US/packaging-guidelines/Systemd/#activation_dbus
"-" is not allowed as D-Bus path and interface name, and discouraged as
bus name. This cause nm-priv-helper to crash, because GDBus asserts the
the object path is valid.
Replace the '-' with '_'. This way, it's consistent with
"nm_dispatcher".
Fixes: d68ab6b8f0 ('nm-sudo: rename to nm-priv-helper')
The signal parameters are G_TYPE_UINT. We should not assume that our
enums are a compatible integer type.
In practice of course they always were. Let's just be clear about when
we have an integer and when we have an enum.
- use slice allocator
- use designated initializers
- first determine all parameters in killswitch_new() before
setting ks.
- drop unnecessary memset().
Naming is important. Especially when we have a 8k LOC monster, that
manages everything.
Rename things related to Rfkill to give them a common prefix.
Also, move code around so it's beside each other.
RadioState contained both the mutable user-data and meta-data about the
radio state. The latter is immutable. The parts that cannot change, should
be separate from those that can change. Move them to a separate array.
Of course, we only have on NMManager instance, so having these fields embedded
in NMManagerPrivate did not waste memory. This change is done, because immutable
fields should be const. In this case, they are now const global data, which
is even protected by the linker from accidental mutation.
Names in header files should have an "nm" prefix. We do that pretty
consistently. Fix the offenders RfKillState and RfKillType.
Also, rename the RfKillState enums to follow the type name. For example,
NM_RFKILL_STATE_SOFT_BLOCKED instead of RFKILL_SOFT_BLOCKED.
Also, when we camel-case a typedef (NMRfKillState) we would want that
the lower-case names use underscore between the words. So it should be
`nm_rf_kill_state_to_string()`. But that looks awkward. So the right solution
here is to also rename "RfKill" to "Rfkill". That make is consistent
with the spelling of the existing `NMRfkillManager` type and the
`nm-rfkill-manager.h` file.
- use "const RadioState" where possible
- use "bool" bitfields in RadioState (boolean flags in structs
should be `bool` types for consistency) and order fields by
alignment.
- break lines for variable declaration in manager_rfkill_update_one_type().
- return (and nm_assert()) from update_rstate_from_rfkill(). By
not adding a default case, compiler would warn if we forget to
handle an enum value. We can easily do that, by just returning,
and let the "default" case be handled by nm_assert_not_reached()
-- which unlike g_warn_if_reached() compiles to nothing in
release build.
- add nm_assert() that `priv->radio_states[rtype]` is not out of range.
- use designated initializers for priv->radio_states[].
GObject Properties are flexible and powerful. In practice, NMDevicePrivate.rfkill_type
was only set once via the construct-only property NM_DEVICE_RFKILL_TYPE.
Which in turn was always set to a well-known value, only depending on the device
type.
We don't need this flexibility. The rfkill-type only depends on the
device type and doesn't change. Replace the property by a field in
NMDeviceClass.
For one, construct properties have an overhead, that the property setter is
called whenever we construct a NMDevice. But the real reason for this
change, is that a property give a notion as this could change during the
lifetime of a NMDevice (which it in fact did not, being construct-only).
Or that the type depends on something more complex, when instead it only
depends on the device type. A non-mutated class property is simpler,
because it's clear that it does not depend on the device instance,
only on the type/class.
Also, `git grep -w rfkill_type` now nicely shows the (few) references to
this variable and its easier to understand.
The problem was that glib-mkenums requires all enum values on a separate
line. And clang-format would put all on the same line, unless the last
value has a trailing comma. Which is the better solution here.
We don't run glib-mkenums for certain sources like "core" and
"libnm-glib-aux".
These annotations have no effect. Drop them.
They also mess with the automated formatting.
We made the choice, that NMPlatformIPRoute does not contain the actual
route table, instead it contains a "remapped" number: table_coerced.
That remapping done, so that the default (which we want semantically to
be 254, RT_TABLE_MAIN) is numerical zero so that struct initialization
doesn't you require to explicitly set the default.
Hence, we must always distinguish whether we have the real table number
or the "table_coerced", and you must convert back and forth between the
two.
Now, the parameter of nm_l3_config_data_merge() are real table numbers
(as also indicated by their name not having the term "coerced"). So
usually they are set to actually 254.
When we set the field of NMPlatformIPRoute, we must coerce it. This was
wrong, and we would see wrong table numbers in the log:
l3cfg[17b98e59a477b0f4,ifindex=2]: obj-state: track: [2a32eca99405767e, ip4-route, type unicast table 0 0.0.0.0/0 via ...
Fixes: b4aa35e72d ('l3cfg: extend nm_l3cfg_add_config() to accept default route table and metric')
gcc-4.8.5-44.el7.x86_64 warns:
In file included from ./src/libnm-systemd-shared/src/basic/hashmap.h:10:0,
from ./src/libnm-systemd-shared/src/shared/dns-domain.h:10,
from src/libnm-systemd-shared/nm-sd-utils-shared.c:12:
./src/libnm-systemd-shared/src/basic/util.h: In function 'log2u64':
./src/libnm-systemd-shared/src/basic/util.h:30:20: error: first argument to '__builtin_choose_expr' not a constant
#define LOG2ULL(x) __builtin_choose_expr(__builtin_constant_p(x), CONST_LOG2ULL(x), NONCONST_LOG2ULL(x))
^
./src/libnm-systemd-shared/src/basic/util.h:34:16: note: in expansion of macro 'LOG2ULL'
return LOG2ULL(x);
^
./src/libnm-systemd-shared/src/basic/util.h: In function 'log2i':
./src/libnm-systemd-shared/src/basic/util.h:53:18: error: first argument to '__builtin_choose_expr' not a constant
#define LOG2U(x) __builtin_choose_expr(__builtin_constant_p(x), CONST_LOG2U(x), NONCONST_LOG2U(x))
^
./src/libnm-systemd-shared/src/basic/util.h:56:16: note: in expansion of macro 'LOG2U'
return LOG2U(x);
^
./src/libnm-systemd-shared/src/basic/util.h: In function 'log2u':
./src/libnm-systemd-shared/src/basic/util.h:53:18: error: first argument to '__builtin_choose_expr' not a constant
#define LOG2U(x) __builtin_choose_expr(__builtin_constant_p(x), CONST_LOG2U(x), NONCONST_LOG2U(x))
^
./src/libnm-systemd-shared/src/basic/util.h:60:16: note: in expansion of macro 'LOG2U'
return LOG2U(x);
^
gcc-4.8.5-44.el7.x86_64 warns:
In file included from ./src/libnm-systemd-shared/src/basic/hashmap.h:10:0,
from ./src/libnm-systemd-shared/src/shared/dns-domain.h:10,
from src/libnm-systemd-shared/nm-sd-utils-shared.c:12:
./src/libnm-systemd-shared/src/basic/util.h: In function 'log2u64':
./src/libnm-systemd-shared/src/basic/util.h:30:20: error: first argument to '__builtin_choose_expr' not a constant
#define LOG2ULL(x) __builtin_choose_expr(__builtin_constant_p(x), CONST_LOG2ULL(x), NONCONST_LOG2ULL(x))
^
./src/libnm-systemd-shared/src/basic/util.h:34:16: note: in expansion of macro 'LOG2ULL'
return LOG2ULL(x);
^
./src/libnm-systemd-shared/src/basic/util.h: In function 'log2i':
./src/libnm-systemd-shared/src/basic/util.h:53:18: error: first argument to '__builtin_choose_expr' not a constant
#define LOG2U(x) __builtin_choose_expr(__builtin_constant_p(x), CONST_LOG2U(x), NONCONST_LOG2U(x))
^
./src/libnm-systemd-shared/src/basic/util.h:56:16: note: in expansion of macro 'LOG2U'
return LOG2U(x);
^
./src/libnm-systemd-shared/src/basic/util.h: In function 'log2u':
./src/libnm-systemd-shared/src/basic/util.h:53:18: error: first argument to '__builtin_choose_expr' not a constant
#define LOG2U(x) __builtin_choose_expr(__builtin_constant_p(x), CONST_LOG2U(x), NONCONST_LOG2U(x))
^
./src/libnm-systemd-shared/src/basic/util.h:60:16: note: in expansion of macro 'LOG2U'
return LOG2U(x);
^
