libnm supports verbose debug logging by setting "LIBNM_CLIENT_DEBUG"
environment variable. That mechanism uses g_printerr() (or g_print()).
When testing an application it's useful to combine printf debugging
with this debug logging. However, python's print() statement is
additionally buffered and not in sync with the logging functions that
libnm uses.
As far as I see, g_print() and g_printerr() is not accessible via
introspections/pygobject, probably because these are variadic functions.
Add nm_utils_print() to libnm. This ensures to use the same logging
mechanism as libnm.
Run:
./contrib/scripts/nm-code-format.sh -i
./contrib/scripts/nm-code-format.sh -i
Yes, it needs to run twice because the first run doesn't yet produce the
final result.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Trace logging from libnm is verbose. So, by default we print trace
messages to stderr. However, that means that messages printed to stdout
are not in sync with the trace logging.
That means, if the libnm application prints messages to stdout, and
you'd like to correlate them with trace messages, it is difficult.
Add an option to allow printing trace messages to stdout.
$ LIBNM_CLIENT_DEBUG=trace,stdout nmcli
Possibly redirecting stderr to stdout might also work around the
ordering issue. However, it's not entirely clear how buffering of
the file streams affects this.
When parsing user input if is often convenient to allow stripping whitespace.
Especially with escaped strings, the user could still escape the whitespace,
if the space should be taken literally.
Add support for that to nm_utils_buf_utf8safe_unescape().
Note that this is not the same as calling g_strstrip() before/after
unescape. That is, because nm_utils_buf_utf8safe_unescape() correctly
preserves escaped whitespace. If you call g_strstrip() before/after
the unescape, you don't know whether the whitespace is escaped.
Add VRF support to the daemon. When the device we are activating is a
VRF or a VRF's slave, put routes in the table specified by the VRF
connection.
Also, introduce a VRF device type in libnm.
The abbreviations "ns" and "ms" seem not very clear to me. Spell them
out to nsec/msec. Also, in parts we already used the longer abbreviations,
so it wasn't consistent.
No longer use GDBusObjectMangaerClient and gdbus-codegen generated classes
for the NMClient cache. Instead, use GDBusConnection directly and a
custom implementation (NMLDBusObject) for caching D-Bus' ObjectManager
data.
CHANGES
-------
- This is a complete rework. I think the previous implementation was
difficult to understand. There were unfixed bugs and nobody understood
the code well enough to fix them. Maybe somebody out there understood the
code, but I certainly did not. At least nobody provided patches to fix those
issues. I do believe that this implementation is more straightforward and
easier to understand. It removes a lot of layers of code. Whether this claim
of simplicity is true, each reader must decide for himself/herself. Note
that it is still fairly complex.
- There was a lingering performance issue with large number of D-Bus
objects. The patch tries hard that the implementation scales well. Of
course, when we cache N objects that have N-to-M references to other,
we still are fundamentally O(N*M) for runtime and memory consumption (with
M being the number of references between objects). But each part should behave
efficiently and well.
- Play well with GMainContext. libnm code (NMClient) is generally not
thread safe. However, it should work to use multiple instances in
parallel, as long as each access to a NMClient is through the caller's
GMainContext. This follows glib's style and effectively allows to use NMClient
in a multi threaded scenario. This implies to stick to a main context
upon construction and ensure that callbacks are only invoked when
iterating that context. Also, NMClient itself shall never iterate the
caller's context. This also means, libnm must never use g_idle_add() or
g_timeout_add(), as those enqueue sources in the g_main_context_default()
context.
- Get ordering of messages right. All events are consistently enqueued
in a GMainContext and processed strictly in order. For example,
previously "nm-object.c" tried to combine signals and emit them on an
idle handler. That is wrong, signals must be emitted in the right order
and when they happen. Note that when using GInitable's synchronous initialization
to initialize the NMClient instance, NMClient internally still operates fully
asynchronously. In that case NMClient has an internal main context.
- NMClient takes over most of the functionality. When using D-Bus'
ObjectManager interface, one needs to handle basically the entire state
of the D-Bus interface. That cannot be separated well into distinct
parts, and even if you try, you just end up having closely related code
in different source files. Spreading related code does not make it
easier to understand, on the contrary. That means, NMClient is
inherently complex as it contains most of the logic. I think that is
not avoidable, but it's not as bad as it sounds.
- NMClient processes D-Bus messages and state changes in separate steps.
First NMClient unpacks the message (e.g. _dbus_handle_properties_changed()) and
keeps track of the changed data. Then we update the GObject instances
(_dbus_handle_obj_changed_dbus()) without emitting any signals yet. Finally,
we emit all signals and notifications that were collected
(_dbus_handle_changes_commit()). Note that for example during the initial
GetManagedObjects() reply, NMClient receive a large amount of state at once.
But we first apply all the changes to our GObject instances before
emitting any signals. The result is that signals are always emitted in a moment
when the cache is consistent. The unavoidable downside is that when you receive
a property changed signal, possibly many other properties changed
already and more signals are about to be emitted.
- NMDeviceWifi no longer modifies the content of the cache from client side
during poke_wireless_devices_with_rf_status(). The content of the cache
should be determined by D-Bus alone and follow what NetworkManager
service exposes. Local modifications should be avoided.
- This aims to bring no API/ABI change, though it does of course bring
various subtle changes in behavior. Those should be all for the better, but the
goal is not to break any existing clients. This does change internal
(albeit externally visible) API, like dropping NM_OBJECT_DBUS_OBJECT_MANAGER
property and NMObject no longer implementing GInitableIface and GAsyncInitableIface.
- Some uses of gdbus-codegen classes remain in NMVpnPluginOld, NMVpnServicePlugin
and NMSecretAgentOld. These are independent of NMClient/NMObject and
should be reworked separately.
- While we no longer use generated classes from gdbus-codegen, we don't
need more glue code than before. Also before we constructed NMPropertiesInfo and
a had large amount of code to propagate properties from NMDBus* to NMObject.
That got completely reworked, but did not fundamentally change. You still need
about the same effort to create the NMLDBusMetaIface. Not using
generated bindings did not make anything worse (which tells about the
usefulness of generated code, at least in the way it was used).
- NMLDBusMetaIface and other meta data is static and immutable. This
avoids copying them around. Also, macros like NML_DBUS_META_PROPERTY_INIT_U()
have compile time checks to ensure the property types matches. It's pretty hard
to misuse them because it won't compile.
- The meta data now explicitly encodes the expected D-Bus types and
makes sure never to accept wrong data. That would only matter when the
server (accidentally or intentionally) exposes unexpected types on
D-Bus. I don't think that was previously ensured in all cases.
For example, demarshal_generic() only cared about the GObject property
type, it didn't know the expected D-Bus type.
- Previously GDBusObjectManager would sometimes emit warnings (g_log()). Those
probably indicated real bugs. In any case, it prevented us from running CI
with G_DEBUG=fatal-warnings, because there would be just too many
unrelated crashes. Now we log debug messages that can be enabled with
"LIBNM_CLIENT_DEBUG=trace". Some of these messages can also be turned
into g_warning()/g_critical() by setting LIBNM_CLIENT_DEBUG=warning,error.
Together with G_DEBUG=fatal-warnings, this turns them into assertions.
Note that such "assertion failures" might also happen because of a server
bug (or change). Thus these are not common assertions that indicate a bug
in libnm and are thus not armed unless explicitly requested. In our CI we
should now always run with LIBNM_CLIENT_DEBUG=warning,error and
G_DEBUG=fatal-warnings and to catch bugs. Note that currently
NetworkManager has bugs in this regard, so enabling this will result in
assertion failures. That should be fixed first.
- Note that this changes the order in which we emit "notify:devices" and
"device-added" signals. I think it makes the most sense to emit first
"device-removed", then "notify:devices", and finally "device-added"
signals.
This changes behavior for commit 52ae28f6e5 ('libnm: queue
added/removed signals and suppress uninitialized notifications'),
but I don't think that users should actually rely on the order. Still,
the new order makes the most sense to me.
- In NetworkManager, profiles can be invisible to the user by setting
"connection.permissions". Such profiles would be hidden by NMClient's
nm_client_get_connections() and their "connection-added"/"connection-removed"
signals.
Note that NMActiveConnection's nm_active_connection_get_connection()
and NMDevice's nm_device_get_available_connections() still exposes such
hidden NMRemoteConnection instances. This behavior was preserved.
NUMBERS
-------
I compared 3 versions of libnm.
[1] 962297f908, current tip of nm-1-20 branch
[2] 4fad8c7c64, current master, immediate parent of this patch
[3] this patch
All tests were done on Fedora 31, x86_64, gcc 9.2.1-1.fc31.
The libraries were build with
$ ./contrib/fedora/rpm/build_clean.sh -g -w test -W debug
Note that RPM build already stripped the library.
---
N1) File size of libnm.so.0.1.0 in bytes. There currently seems to be a issue
on Fedora 31 generating wrong ELF notes. Usually, libnm is smaller but
in these tests it had large (and bogus) ELF notes. Anyway, the point
is to show the relative sizes, so it doesn't matter).
[1] 4075552 (102.7%)
[2] 3969624 (100.0%)
[3] 3705208 ( 93.3%)
---
N2) `size /usr/lib64/libnm.so.0.1.0`:
text data bss dec hex filename
[1] 1314569 (102.0%) 69980 ( 94.8%) 10632 ( 80.4%) 1395181 (101.4%) 1549ed /usr/lib64/libnm.so.0.1.0
[2] 1288410 (100.0%) 73796 (100.0%) 13224 (100.0%) 1375430 (100.0%) 14fcc6 /usr/lib64/libnm.so.0.1.0
[3] 1229066 ( 95.4%) 65248 ( 88.4%) 13400 (101.3%) 1307714 ( 95.1%) 13f442 /usr/lib64/libnm.so.0.1.0
---
N3) Performance test with test-client.py. With checkout of [2], run
```
prepare_checkout() {
rm -rf /tmp/nm-test && \
git checkout -B test 4fad8c7c64 && \
git clean -fdx && \
./autogen.sh --prefix=/tmp/nm-test && \
make -j 5 install && \
make -j 5 check-local-clients-tests-test-client
}
prepare_test() {
NM_TEST_REGENERATE=1 NM_TEST_CLIENT_BUILDDIR="/data/src/NetworkManager" NM_TEST_CLIENT_NMCLI_PATH=/usr/bin/nmcli python3 ./clients/tests/test-client.py -v
}
do_test() {
for i in {1..10}; do
NM_TEST_CLIENT_BUILDDIR="/data/src/NetworkManager" NM_TEST_CLIENT_NMCLI_PATH=/usr/bin/nmcli python3 ./clients/tests/test-client.py -v || return -1
done
echo "done!"
}
prepare_checkout
prepare_test
time do_test
```
[1] real 2m14.497s (101.3%) user 5m26.651s (100.3%) sys 1m40.453s (101.4%)
[2] real 2m12.800s (100.0%) user 5m25.619s (100.0%) sys 1m39.065s (100.0%)
[3] real 1m54.915s ( 86.5%) user 4m18.585s ( 79.4%) sys 1m32.066s ( 92.9%)
---
N4) Performance. Run NetworkManager from build [2] and setup a large number
of profiles (551 profiles and 515 devices, mostly unrealized). This
setup is already at the edge of what NetworkManager currently can
handle. Of course, that is a different issue. Here we just check how
long plain `nmcli` takes on the system.
```
do_cleanup() {
for UUID in $(nmcli -g NAME,UUID connection show | sed -n 's/^xx-c-.*:\([^:]\+\)$/\1/p'); do
nmcli connection delete uuid "$UUID"
done
for DEVICE in $(nmcli -g DEVICE device status | grep '^xx-i-'); do
nmcli device delete "$DEVICE"
done
}
do_setup() {
do_cleanup
for i in {1..30}; do
nmcli connection add type bond autoconnect no con-name xx-c-bond-$i ifname xx-i-bond-$i ipv4.method disabled ipv6.method ignore
for j in $(seq $i 30); do
nmcli connection add type vlan autoconnect no con-name xx-c-vlan-$i-$j vlan.id $j ifname xx-i-vlan-$i-$j vlan.parent xx-i-bond-$i ipv4.method disabled ipv6.method ignore
done
done
systemctl restart NetworkManager.service
sleep 5
}
do_test() {
perf stat -r 50 -B nmcli 1>/dev/null
}
do_test
```
[1]
Performance counter stats for 'nmcli' (50 runs):
456.33 msec task-clock:u # 1.093 CPUs utilized ( +- 0.44% )
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
5,900 page-faults:u # 0.013 M/sec ( +- 0.02% )
1,408,675,453 cycles:u # 3.087 GHz ( +- 0.48% )
1,594,741,060 instructions:u # 1.13 insn per cycle ( +- 0.02% )
368,744,018 branches:u # 808.061 M/sec ( +- 0.02% )
4,566,058 branch-misses:u # 1.24% of all branches ( +- 0.76% )
0.41761 +- 0.00282 seconds time elapsed ( +- 0.68% )
[2]
Performance counter stats for 'nmcli' (50 runs):
477.99 msec task-clock:u # 1.088 CPUs utilized ( +- 0.36% )
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
5,948 page-faults:u # 0.012 M/sec ( +- 0.03% )
1,471,133,482 cycles:u # 3.078 GHz ( +- 0.36% )
1,655,275,369 instructions:u # 1.13 insn per cycle ( +- 0.02% )
382,595,152 branches:u # 800.433 M/sec ( +- 0.02% )
4,746,070 branch-misses:u # 1.24% of all branches ( +- 0.49% )
0.43923 +- 0.00242 seconds time elapsed ( +- 0.55% )
[3]
Performance counter stats for 'nmcli' (50 runs):
352.36 msec task-clock:u # 1.027 CPUs utilized ( +- 0.32% )
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
4,790 page-faults:u # 0.014 M/sec ( +- 0.26% )
1,092,341,186 cycles:u # 3.100 GHz ( +- 0.26% )
1,209,045,283 instructions:u # 1.11 insn per cycle ( +- 0.02% )
281,708,462 branches:u # 799.499 M/sec ( +- 0.01% )
3,101,031 branch-misses:u # 1.10% of all branches ( +- 0.61% )
0.34296 +- 0.00120 seconds time elapsed ( +- 0.35% )
---
N5) same setup as N4), but run `PAGER= /bin/time -v nmcli`:
[1]
Command being timed: "nmcli"
User time (seconds): 0.42
System time (seconds): 0.04
Percent of CPU this job got: 107%
Elapsed (wall clock) time (h:mm:ss or m:ss): 0:00.43
Average shared text size (kbytes): 0
Average unshared data size (kbytes): 0
Average stack size (kbytes): 0
Average total size (kbytes): 0
Maximum resident set size (kbytes): 34456
Average resident set size (kbytes): 0
Major (requiring I/O) page faults: 0
Minor (reclaiming a frame) page faults: 6128
Voluntary context switches: 1298
Involuntary context switches: 1106
Swaps: 0
File system inputs: 0
File system outputs: 0
Socket messages sent: 0
Socket messages received: 0
Signals delivered: 0
Page size (bytes): 4096
Exit status: 0
[2]
Command being timed: "nmcli"
User time (seconds): 0.44
System time (seconds): 0.04
Percent of CPU this job got: 108%
Elapsed (wall clock) time (h:mm:ss or m:ss): 0:00.44
Average shared text size (kbytes): 0
Average unshared data size (kbytes): 0
Average stack size (kbytes): 0
Average total size (kbytes): 0
Maximum resident set size (kbytes): 34452
Average resident set size (kbytes): 0
Major (requiring I/O) page faults: 0
Minor (reclaiming a frame) page faults: 6169
Voluntary context switches: 1849
Involuntary context switches: 142
Swaps: 0
File system inputs: 0
File system outputs: 0
Socket messages sent: 0
Socket messages received: 0
Signals delivered: 0
Page size (bytes): 4096
Exit status: 0
[3]
Command being timed: "nmcli"
User time (seconds): 0.32
System time (seconds): 0.02
Percent of CPU this job got: 102%
Elapsed (wall clock) time (h:mm:ss or m:ss): 0:00.34
Average shared text size (kbytes): 0
Average unshared data size (kbytes): 0
Average stack size (kbytes): 0
Average total size (kbytes): 0
Maximum resident set size (kbytes): 29196
Average resident set size (kbytes): 0
Major (requiring I/O) page faults: 0
Minor (reclaiming a frame) page faults: 5059
Voluntary context switches: 919
Involuntary context switches: 685
Swaps: 0
File system inputs: 0
File system outputs: 0
Socket messages sent: 0
Socket messages received: 0
Signals delivered: 0
Page size (bytes): 4096
Exit status: 0
---
N6) same setup as N4), but run `nmcli monitor` and look at `ps aux` for
the RSS size.
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
[1] me 1492900 21.0 0.2 461348 33248 pts/10 Sl+ 15:02 0:00 nmcli monitor
[2] me 1490721 5.0 0.2 461496 33548 pts/10 Sl+ 15:00 0:00 nmcli monitor
[3] me 1495801 16.5 0.1 459476 28692 pts/10 Sl+ 15:04 0:00 nmcli monitor
It's nicely trivial and independent. Move it to a separate place,
to avoid cluttering the more complicated code and to make it testable.
Also, use binary search to find the value by string.
It's useful, because it's easy to get overwhelemed by the logging output.
The timestamp makes it easier to keep track. Also, it allows to see how long
things take.
Commonly, a library (like libnm) is not supposed to log anything.
Logging is not a suitable way to notify the calling application
about anything. When something of importance happens, then the
application must be notified via the library's API.
However, logging can be very useful for debugging to see what is going
on. Add a logging macro that by default does nothing, but can be turned
on via an environment variable "LIBNM_CLIENT_DEBUG=debug".
Another point is that libnm relies on the server side NetworkManager
D-Bus interface to be in an expected manner. For example, we require a
D-Bus object "org.freedesktop.NetworkManager" to be present and certain
D-Bus interfaces implemented.
However libnm should treat NetworkManager as external and untrusted component.
That means, we cannot assert against the expectations we have. There are two
reasons for this:
- a bug in NetworkManager, dbus-daemon or else may cause such errors.
This must not trigger an assertion failure in the client
application, at least not unless requested.
- libnm must be forward and backward compatible against a different
NetworkManager server version. That is only possibly by ignoring
anything that is unexpected. Asserting by default might prevent
to implement API changes, both on libnm and server side.
Note that we also don't notify the calling application via dedicated
API. On the one hand, these things *can* happen. On the other hand, what
would the calling appication do about it anyway? libnm by default must
just behave gracefully and pretend all is good.
For testing, development and debugging that is however not useful. We
want the user to opt in to strict API validation. The user will be able
to do that by setting "LIBNM_CLIENT_DEBUG=warning", which causes API
violations being logged with g_warning(). These are assertions when
running with G_DEBUG=fatal-warnings.
This is inspired by GDBus' G_DBUS_DEBUG variable.
Note that LIBNM_CLIENT_DEBUG environment variables is undocumented, unstable
API. It's used for debugging and testing of the current libnm version at hand.
There is no guaranteed stable behavior how a different libnm version
might behave.
We no longer add these. If you use Emacs, configure it yourself.
Also, due to our "smart-tab" usage the editor anyway does a subpar
job handling our tabs. However, on the upside every user can choose
whatever tab-width he/she prefers. If "smart-tabs" are used properly
(like we do), every tab-width will work.
No manual changes, just ran commands:
F=($(git grep -l -e '-\*-'))
sed '1 { /\/\* *-\*- *[mM]ode.*\*\/$/d }' -i "${F[@]}"
sed '1,4 { /^\(#\|--\|dnl\) *-\*- [mM]ode/d }' -i "${F[@]}"
Check remaining lines with:
git grep -e '-\*-'
The ultimate purpose of this is to cleanup our files and eventually use
SPDX license identifiers. For that, first get rid of the boilerplate lines.
This removes libnm-glib, libnm-glib-vpn, and libnm-util for good.
The it has been replaced with libnm since NetworkManager 1.0, disabled
by default since 1.12 and no up-to-date distributions ship it for years
now.
Removing the libraries allows us to:
* Remove the horrible hacks that were in place to deal with accidental use
of both the new and old library in a single process.
* Relief the translators of maintenance burden of similar yet different
strings.
* Get rid of known bad code without chances of ever getting fixed
(libnm-glib/nm-object.c and libnm-glib/nm-object-cache.c)
* Generally lower the footprint of the releases and our workspace
If there are some really really legacy users; they can just build
libnm-glib and friends from the NetworkManager-1.16 distribution. The
D-Bus API is stable and old libnm-glib will keep working forever.
https://github.com/NetworkManager/NetworkManager/pull/308
This removes libnm-glib, libnm-glib-vpn, and libnm-util for good.
The it has been replaced with libnm since NetworkManager 1.0, disabled
by default since 1.12 and no up-to-date distributions ship it for years
now.
Removing the libraries allows us to:
* Remove the horrible hacks that were in place to deal with accidental use
of both the new and old library in a single process.
* Relief the translators of maintenance burden of similar yet different
strings.
* Get rid of known bad code without chances of ever getting fixed
(libnm-glib/nm-object.c and libnm-glib/nm-object-cache.c)
* Generally lower the footprint of the releases and our workspace
If there are some really really legacy users; they can just build
libnm-glib and friends from the NetworkManager-1.16 distribution. The
D-Bus API is stable and old libnm-glib will keep working forever.
https://github.com/NetworkManager/NetworkManager/pull/308
The product names are generally of rather poor quality. The product name
is no place to enumerate product capabilities, the bus it's attached on
and similar nonsense.
If there's a [<string>] that survived the substitution, then the string
is supposed to be a short form that is generally preferrable.
That's great in theory, but actually it's rather often pure garbage for
product names. Let's prefer it just for vendors and provide an option to
drop it (will be useful for fixing up product names).
The hwdb generally contains the strings of rather poor quality,
especially when it comes to sensibly presenting them to the user and
they need various cleanups.
While the following patches add fixups, this one splits out vendor
fixups, because it turns out that a different set of fixups is needed
than for products.
Register empty "NMClient" and "NetworkManager" GIR modules as soon as libnm is
loaded witch gnome-introspection. This prevents the real modules from being
loaded because they would in turn load libnm-glib and abort() and crash.
In particular this prevents the GNOME shell from crashing with
libnm-glib abort and allows gracefully disabling the extensions which
use the obsolete library.
Test:
$ cat test.js
const NM = imports.gi.NM;
print (NM.SecretAgentGetSecretsFlags.ALLOW_INTERACTION);
const NMClient = imports.gi.NMClient;
print (NMClient.SecretAgentGetSecretsFlags.ALLOW_INTERACTION);
Before:
$ gjs test.js
1
(gjs:16253): libnm-util-ERROR **: libnm symbols detected; Mixing libnm with libnm-util/libnm-glib is not supported
Trace/breakpoint trap (core dumped)
$
After:
$ gjs test.js
1
Gjs-Message: JS WARNING: [test.js 5]: reference to undefined property "SecretAgentGetSecretsFlags"
(gjs:16228): Gjs-WARNING **: JS ERROR: TypeError: NMClient.SecretAgentGetSecretsFlags is undefined
@test.js:5:1
JS_EvaluateScript() failed
Previously, internal parts of libnm were not testable.
Instead, add "libnm/nm-libnm-utils.c" and "libnm/libnm-utils.la"
to contain code that can be statically linked with a new
test "libnm/tests/test-general".
