We will need more levels of priority. Change the naming
to make room for that.
sed 's/NML_DBUS_META_INTERFACE_PRIO_INSTANTIATE_LOW/NML_DBUS_META_INTERFACE_PRIO_INSTANTIATE_10/g' `git grep -l NML_DBUS_META_INTERFACE_PRIO_INSTANTIATE_ ` -i
sed 's/NML_DBUS_META_INTERFACE_PRIO_INSTANTIATE_LOW/NML_DBUS_META_INTERFACE_PRIO_INSTANTIATE_10/g' `git grep -l NML_DBUS_META_INTERFACE_PRIO_INSTANTIATE_ ` -i
./contrib/scripts/nm-code-format-container.sh
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
[thaller@redhat.com: split original patch]
Run:
./contrib/scripts/nm-code-format.sh -i
./contrib/scripts/nm-code-format.sh -i
Yes, it needs to run twice because the first run doesn't yet produce the
final result.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Generally, libnm's NMClient cache only wants to expose NMObjects that
are fully initalized. Most objects don't require anything special,
except NMRemoteConnection which waits for the GetSettings() call to complete.
NMObjects reference each other. For example, NMActiveConnection
references NMDevice and NMRemoteConnection. There is a desire that an
object is only ready, if the objects that it references are ready too.
In practice that is not done, because usually every objects references
other objects, that means all objects would be declared as non-ready
as long as any of them is still initializing. That does not seem
desirable. Instead, most objects (except NMRemoteConnection and now
NMActiveConnection) are considered ready and visible, once their first
notification completes. In case the objects reference any object that is
not yet ready, the references is NULL (but the source object is visible
already). This is also done this way, to cope with cycles where
objects reference each other. In practice, such cycles should not be
exposed by NetworkManager. However, libnm should be robust against that.
This has the undesired effect that when you call AddAndActivate(), then
the NMActiveConnection might already be visible while its
NMRemoteConnection isn't. That means, ac.get_connection() will
initially return NULL, until the remote connection becomes ready.
Also add a special handling that NMActiveConnection waits for their
NMRemoteConnection to be ready, before being ready itself.
Fixes: ce0e898fb4 ('libnm: refactor caching of D-Bus objects in NMClient')
No longer use GDBusObjectMangaerClient and gdbus-codegen generated classes
for the NMClient cache. Instead, use GDBusConnection directly and a
custom implementation (NMLDBusObject) for caching D-Bus' ObjectManager
data.
CHANGES
-------
- This is a complete rework. I think the previous implementation was
difficult to understand. There were unfixed bugs and nobody understood
the code well enough to fix them. Maybe somebody out there understood the
code, but I certainly did not. At least nobody provided patches to fix those
issues. I do believe that this implementation is more straightforward and
easier to understand. It removes a lot of layers of code. Whether this claim
of simplicity is true, each reader must decide for himself/herself. Note
that it is still fairly complex.
- There was a lingering performance issue with large number of D-Bus
objects. The patch tries hard that the implementation scales well. Of
course, when we cache N objects that have N-to-M references to other,
we still are fundamentally O(N*M) for runtime and memory consumption (with
M being the number of references between objects). But each part should behave
efficiently and well.
- Play well with GMainContext. libnm code (NMClient) is generally not
thread safe. However, it should work to use multiple instances in
parallel, as long as each access to a NMClient is through the caller's
GMainContext. This follows glib's style and effectively allows to use NMClient
in a multi threaded scenario. This implies to stick to a main context
upon construction and ensure that callbacks are only invoked when
iterating that context. Also, NMClient itself shall never iterate the
caller's context. This also means, libnm must never use g_idle_add() or
g_timeout_add(), as those enqueue sources in the g_main_context_default()
context.
- Get ordering of messages right. All events are consistently enqueued
in a GMainContext and processed strictly in order. For example,
previously "nm-object.c" tried to combine signals and emit them on an
idle handler. That is wrong, signals must be emitted in the right order
and when they happen. Note that when using GInitable's synchronous initialization
to initialize the NMClient instance, NMClient internally still operates fully
asynchronously. In that case NMClient has an internal main context.
- NMClient takes over most of the functionality. When using D-Bus'
ObjectManager interface, one needs to handle basically the entire state
of the D-Bus interface. That cannot be separated well into distinct
parts, and even if you try, you just end up having closely related code
in different source files. Spreading related code does not make it
easier to understand, on the contrary. That means, NMClient is
inherently complex as it contains most of the logic. I think that is
not avoidable, but it's not as bad as it sounds.
- NMClient processes D-Bus messages and state changes in separate steps.
First NMClient unpacks the message (e.g. _dbus_handle_properties_changed()) and
keeps track of the changed data. Then we update the GObject instances
(_dbus_handle_obj_changed_dbus()) without emitting any signals yet. Finally,
we emit all signals and notifications that were collected
(_dbus_handle_changes_commit()). Note that for example during the initial
GetManagedObjects() reply, NMClient receive a large amount of state at once.
But we first apply all the changes to our GObject instances before
emitting any signals. The result is that signals are always emitted in a moment
when the cache is consistent. The unavoidable downside is that when you receive
a property changed signal, possibly many other properties changed
already and more signals are about to be emitted.
- NMDeviceWifi no longer modifies the content of the cache from client side
during poke_wireless_devices_with_rf_status(). The content of the cache
should be determined by D-Bus alone and follow what NetworkManager
service exposes. Local modifications should be avoided.
- This aims to bring no API/ABI change, though it does of course bring
various subtle changes in behavior. Those should be all for the better, but the
goal is not to break any existing clients. This does change internal
(albeit externally visible) API, like dropping NM_OBJECT_DBUS_OBJECT_MANAGER
property and NMObject no longer implementing GInitableIface and GAsyncInitableIface.
- Some uses of gdbus-codegen classes remain in NMVpnPluginOld, NMVpnServicePlugin
and NMSecretAgentOld. These are independent of NMClient/NMObject and
should be reworked separately.
- While we no longer use generated classes from gdbus-codegen, we don't
need more glue code than before. Also before we constructed NMPropertiesInfo and
a had large amount of code to propagate properties from NMDBus* to NMObject.
That got completely reworked, but did not fundamentally change. You still need
about the same effort to create the NMLDBusMetaIface. Not using
generated bindings did not make anything worse (which tells about the
usefulness of generated code, at least in the way it was used).
- NMLDBusMetaIface and other meta data is static and immutable. This
avoids copying them around. Also, macros like NML_DBUS_META_PROPERTY_INIT_U()
have compile time checks to ensure the property types matches. It's pretty hard
to misuse them because it won't compile.
- The meta data now explicitly encodes the expected D-Bus types and
makes sure never to accept wrong data. That would only matter when the
server (accidentally or intentionally) exposes unexpected types on
D-Bus. I don't think that was previously ensured in all cases.
For example, demarshal_generic() only cared about the GObject property
type, it didn't know the expected D-Bus type.
- Previously GDBusObjectManager would sometimes emit warnings (g_log()). Those
probably indicated real bugs. In any case, it prevented us from running CI
with G_DEBUG=fatal-warnings, because there would be just too many
unrelated crashes. Now we log debug messages that can be enabled with
"LIBNM_CLIENT_DEBUG=trace". Some of these messages can also be turned
into g_warning()/g_critical() by setting LIBNM_CLIENT_DEBUG=warning,error.
Together with G_DEBUG=fatal-warnings, this turns them into assertions.
Note that such "assertion failures" might also happen because of a server
bug (or change). Thus these are not common assertions that indicate a bug
in libnm and are thus not armed unless explicitly requested. In our CI we
should now always run with LIBNM_CLIENT_DEBUG=warning,error and
G_DEBUG=fatal-warnings and to catch bugs. Note that currently
NetworkManager has bugs in this regard, so enabling this will result in
assertion failures. That should be fixed first.
- Note that this changes the order in which we emit "notify:devices" and
"device-added" signals. I think it makes the most sense to emit first
"device-removed", then "notify:devices", and finally "device-added"
signals.
This changes behavior for commit 52ae28f6e5 ('libnm: queue
added/removed signals and suppress uninitialized notifications'),
but I don't think that users should actually rely on the order. Still,
the new order makes the most sense to me.
- In NetworkManager, profiles can be invisible to the user by setting
"connection.permissions". Such profiles would be hidden by NMClient's
nm_client_get_connections() and their "connection-added"/"connection-removed"
signals.
Note that NMActiveConnection's nm_active_connection_get_connection()
and NMDevice's nm_device_get_available_connections() still exposes such
hidden NMRemoteConnection instances. This behavior was preserved.
NUMBERS
-------
I compared 3 versions of libnm.
[1] 962297f908, current tip of nm-1-20 branch
[2] 4fad8c7c64, current master, immediate parent of this patch
[3] this patch
All tests were done on Fedora 31, x86_64, gcc 9.2.1-1.fc31.
The libraries were build with
$ ./contrib/fedora/rpm/build_clean.sh -g -w test -W debug
Note that RPM build already stripped the library.
---
N1) File size of libnm.so.0.1.0 in bytes. There currently seems to be a issue
on Fedora 31 generating wrong ELF notes. Usually, libnm is smaller but
in these tests it had large (and bogus) ELF notes. Anyway, the point
is to show the relative sizes, so it doesn't matter).
[1] 4075552 (102.7%)
[2] 3969624 (100.0%)
[3] 3705208 ( 93.3%)
---
N2) `size /usr/lib64/libnm.so.0.1.0`:
text data bss dec hex filename
[1] 1314569 (102.0%) 69980 ( 94.8%) 10632 ( 80.4%) 1395181 (101.4%) 1549ed /usr/lib64/libnm.so.0.1.0
[2] 1288410 (100.0%) 73796 (100.0%) 13224 (100.0%) 1375430 (100.0%) 14fcc6 /usr/lib64/libnm.so.0.1.0
[3] 1229066 ( 95.4%) 65248 ( 88.4%) 13400 (101.3%) 1307714 ( 95.1%) 13f442 /usr/lib64/libnm.so.0.1.0
---
N3) Performance test with test-client.py. With checkout of [2], run
```
prepare_checkout() {
rm -rf /tmp/nm-test && \
git checkout -B test 4fad8c7c64 && \
git clean -fdx && \
./autogen.sh --prefix=/tmp/nm-test && \
make -j 5 install && \
make -j 5 check-local-clients-tests-test-client
}
prepare_test() {
NM_TEST_REGENERATE=1 NM_TEST_CLIENT_BUILDDIR="/data/src/NetworkManager" NM_TEST_CLIENT_NMCLI_PATH=/usr/bin/nmcli python3 ./clients/tests/test-client.py -v
}
do_test() {
for i in {1..10}; do
NM_TEST_CLIENT_BUILDDIR="/data/src/NetworkManager" NM_TEST_CLIENT_NMCLI_PATH=/usr/bin/nmcli python3 ./clients/tests/test-client.py -v || return -1
done
echo "done!"
}
prepare_checkout
prepare_test
time do_test
```
[1] real 2m14.497s (101.3%) user 5m26.651s (100.3%) sys 1m40.453s (101.4%)
[2] real 2m12.800s (100.0%) user 5m25.619s (100.0%) sys 1m39.065s (100.0%)
[3] real 1m54.915s ( 86.5%) user 4m18.585s ( 79.4%) sys 1m32.066s ( 92.9%)
---
N4) Performance. Run NetworkManager from build [2] and setup a large number
of profiles (551 profiles and 515 devices, mostly unrealized). This
setup is already at the edge of what NetworkManager currently can
handle. Of course, that is a different issue. Here we just check how
long plain `nmcli` takes on the system.
```
do_cleanup() {
for UUID in $(nmcli -g NAME,UUID connection show | sed -n 's/^xx-c-.*:\([^:]\+\)$/\1/p'); do
nmcli connection delete uuid "$UUID"
done
for DEVICE in $(nmcli -g DEVICE device status | grep '^xx-i-'); do
nmcli device delete "$DEVICE"
done
}
do_setup() {
do_cleanup
for i in {1..30}; do
nmcli connection add type bond autoconnect no con-name xx-c-bond-$i ifname xx-i-bond-$i ipv4.method disabled ipv6.method ignore
for j in $(seq $i 30); do
nmcli connection add type vlan autoconnect no con-name xx-c-vlan-$i-$j vlan.id $j ifname xx-i-vlan-$i-$j vlan.parent xx-i-bond-$i ipv4.method disabled ipv6.method ignore
done
done
systemctl restart NetworkManager.service
sleep 5
}
do_test() {
perf stat -r 50 -B nmcli 1>/dev/null
}
do_test
```
[1]
Performance counter stats for 'nmcli' (50 runs):
456.33 msec task-clock:u # 1.093 CPUs utilized ( +- 0.44% )
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
5,900 page-faults:u # 0.013 M/sec ( +- 0.02% )
1,408,675,453 cycles:u # 3.087 GHz ( +- 0.48% )
1,594,741,060 instructions:u # 1.13 insn per cycle ( +- 0.02% )
368,744,018 branches:u # 808.061 M/sec ( +- 0.02% )
4,566,058 branch-misses:u # 1.24% of all branches ( +- 0.76% )
0.41761 +- 0.00282 seconds time elapsed ( +- 0.68% )
[2]
Performance counter stats for 'nmcli' (50 runs):
477.99 msec task-clock:u # 1.088 CPUs utilized ( +- 0.36% )
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
5,948 page-faults:u # 0.012 M/sec ( +- 0.03% )
1,471,133,482 cycles:u # 3.078 GHz ( +- 0.36% )
1,655,275,369 instructions:u # 1.13 insn per cycle ( +- 0.02% )
382,595,152 branches:u # 800.433 M/sec ( +- 0.02% )
4,746,070 branch-misses:u # 1.24% of all branches ( +- 0.49% )
0.43923 +- 0.00242 seconds time elapsed ( +- 0.55% )
[3]
Performance counter stats for 'nmcli' (50 runs):
352.36 msec task-clock:u # 1.027 CPUs utilized ( +- 0.32% )
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
4,790 page-faults:u # 0.014 M/sec ( +- 0.26% )
1,092,341,186 cycles:u # 3.100 GHz ( +- 0.26% )
1,209,045,283 instructions:u # 1.11 insn per cycle ( +- 0.02% )
281,708,462 branches:u # 799.499 M/sec ( +- 0.01% )
3,101,031 branch-misses:u # 1.10% of all branches ( +- 0.61% )
0.34296 +- 0.00120 seconds time elapsed ( +- 0.35% )
---
N5) same setup as N4), but run `PAGER= /bin/time -v nmcli`:
[1]
Command being timed: "nmcli"
User time (seconds): 0.42
System time (seconds): 0.04
Percent of CPU this job got: 107%
Elapsed (wall clock) time (h:mm:ss or m:ss): 0:00.43
Average shared text size (kbytes): 0
Average unshared data size (kbytes): 0
Average stack size (kbytes): 0
Average total size (kbytes): 0
Maximum resident set size (kbytes): 34456
Average resident set size (kbytes): 0
Major (requiring I/O) page faults: 0
Minor (reclaiming a frame) page faults: 6128
Voluntary context switches: 1298
Involuntary context switches: 1106
Swaps: 0
File system inputs: 0
File system outputs: 0
Socket messages sent: 0
Socket messages received: 0
Signals delivered: 0
Page size (bytes): 4096
Exit status: 0
[2]
Command being timed: "nmcli"
User time (seconds): 0.44
System time (seconds): 0.04
Percent of CPU this job got: 108%
Elapsed (wall clock) time (h:mm:ss or m:ss): 0:00.44
Average shared text size (kbytes): 0
Average unshared data size (kbytes): 0
Average stack size (kbytes): 0
Average total size (kbytes): 0
Maximum resident set size (kbytes): 34452
Average resident set size (kbytes): 0
Major (requiring I/O) page faults: 0
Minor (reclaiming a frame) page faults: 6169
Voluntary context switches: 1849
Involuntary context switches: 142
Swaps: 0
File system inputs: 0
File system outputs: 0
Socket messages sent: 0
Socket messages received: 0
Signals delivered: 0
Page size (bytes): 4096
Exit status: 0
[3]
Command being timed: "nmcli"
User time (seconds): 0.32
System time (seconds): 0.02
Percent of CPU this job got: 102%
Elapsed (wall clock) time (h:mm:ss or m:ss): 0:00.34
Average shared text size (kbytes): 0
Average unshared data size (kbytes): 0
Average stack size (kbytes): 0
Average total size (kbytes): 0
Maximum resident set size (kbytes): 29196
Average resident set size (kbytes): 0
Major (requiring I/O) page faults: 0
Minor (reclaiming a frame) page faults: 5059
Voluntary context switches: 919
Involuntary context switches: 685
Swaps: 0
File system inputs: 0
File system outputs: 0
Socket messages sent: 0
Socket messages received: 0
Signals delivered: 0
Page size (bytes): 4096
Exit status: 0
---
N6) same setup as N4), but run `nmcli monitor` and look at `ps aux` for
the RSS size.
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
[1] me 1492900 21.0 0.2 461348 33248 pts/10 Sl+ 15:02 0:00 nmcli monitor
[2] me 1490721 5.0 0.2 461496 33548 pts/10 Sl+ 15:00 0:00 nmcli monitor
[3] me 1495801 16.5 0.1 459476 28692 pts/10 Sl+ 15:04 0:00 nmcli monitor
Our NMObject implementations should behave in a similar manner.
For example, string properties should be coerced the a consistent
manner.
Add functions _nml_coerce_property_*() for that. Of course, they
are trivial. Their value is not that they encapsulate some complex
implementation, but that they convey a general concept of how we
want to handle certain properties in NMClient's object cache.
These types are all subclasses of NMObject. These instances are commonly
created by NMClient itself. It makes no sense that a user would
instantiate the type. Much less does it make sense to subclass them.
Hide the object and class structures from public API.
This is an API and ABI break, but of something that is very likely
unused.
This is mainly done to embed the private structure in the object itself.
This has benefits for performance and debugability. But most
importantly, we can obtain a static offset where to access the private data.
That means, we can use the information to access the data pointer
generically, as we will need later.
This is not done for the internal types NMManager, NMRemoteSettings,
and NMDnsManager. These types will be dropped later.
This looks up the GParamSpec from the obj_properties and is
thus more efficient. Also, the generated _notify() function
has the proper argument type and is thus generally preferable.
This is not merely cosmetic. I will need the obj_properties
array to lookup GParamSpec by their PROP_* enum value. The
alternative would be lookup by name, which is more expensive.
We no longer add these. If you use Emacs, configure it yourself.
Also, due to our "smart-tab" usage the editor anyway does a subpar
job handling our tabs. However, on the upside every user can choose
whatever tab-width he/she prefers. If "smart-tabs" are used properly
(like we do), every tab-width will work.
No manual changes, just ran commands:
F=($(git grep -l -e '-\*-'))
sed '1 { /\/\* *-\*- *[mM]ode.*\*\/$/d }' -i "${F[@]}"
sed '1,4 { /^\(#\|--\|dnl\) *-\*- [mM]ode/d }' -i "${F[@]}"
Check remaining lines with:
git grep -e '-\*-'
The ultimate purpose of this is to cleanup our files and eventually use
SPDX license identifiers. For that, first get rid of the boilerplate lines.
state_changed_proxy() updates the value of @state and must also emit
the notify signal for it.
Without this, when the PropertiesChanged signal carrying the change of
'state' arrives after StateChanged, we notice that the value of @state
doesn't change and don't emit the notify, causing a loss of the state
change event.
Fixes: 40ffb962behttps://bugzilla.redhat.com/show_bug.cgi?id=1433883
Note that the reason tracking starts as soon as the object exists (which
is immediately after GDBusObject is created), not when the asynchronous
NMObject initialization finishes. That is so that we the reason changes
in between are not lost.
The vpn-connection should probably be doing the same.
This speeds up the initial object tree load significantly. Also, it
reduces the object management complexity by shifting the duties to
GDBusObjectManager.
The lifetime of all NMObjects is now managed by the NMClient via the
object manager. The NMClient creates the NMObjects for GDBus objects,
triggers the initialization and serves as an object registry (replaces
the nm-cache).
The ObjectManager uses the o.fd.DBus.ObjectManager API to learn of the
object creation, removal and property changes. It takes care of the
property changes so that we don't have to and lets us always see a
consistent object state. Thus at the time we learn of a new object we
already know its properties.
The NMObject unfortunately can't be made synchronously initializable as
the NMRemoteConnection's settings are not managed with standard
o.fd.DBus Properties and ObjectManager APIs and thus are not known to
the ObjectManager. Thus most of the asynchronous object property
changing code in nm-object.c is preserved. The objects notify the
properties that reference them of their initialization in from their
init_finish() methods, thus the asynchronously created objects are not
allowed to fail creation (or the dependees would wait forever). Not a
problem -- if a connection can't get its Settings, it's either invisible
or being removed (presumably we'd learn of the removal from the object
manager soon).
The NMObjects can't be created by the object manager itself, since we
can't determine the resulting object type in proxy_type() yet (we can't
tell from the name and can't access the interface list). Therefore the
GDBusObject is coupled with a NMObject later on.
Lastly, now that all the objects are managed by the object manager, the
NMRemoteSettings and NMManager go away when the daemon is stopped. The
complexity of dealing with calls to NMClient that would require any of
the resources that these objects manage (connection or device lists,
etc.) had to be moved to NMClient. The bright side is that his allows
for removal all of the daemon presence tracking from NMObject.
On D-Bus level, string (s) or object paths (o) cannot be NULL.
Thus, whenver server exposes such an object, it gets automatically
coerced to "" or "/", respectively.
On client side, libnm should coerce certain properties back, for which
"" is just not a sensible value.
For example, an empty NM_DEVICE_ETHERNET_HW_ADDRESS should be instead
exposed as NULL.
Technically, this is an API change. However, all users were well advised
to expect both NULL and "" as possible return values and handle them
accordingly.
- All internal source files (except "examples", which are not internal)
should include "config.h" first. As also all internal source
files should include "nm-default.h", let "config.h" be included
by "nm-default.h" and include "nm-default.h" as first in every
source file.
We already wanted to include "nm-default.h" before other headers
because it might contains some fixes (like "nm-glib.h" compatibility)
that is required first.
- After including "nm-default.h", we optinally allow for including the
corresponding header file for the source file at hand. The idea
is to ensure that each header file is self contained.
- Don't include "config.h" or "nm-default.h" in any header file
(except "nm-sd-adapt.h"). Public headers anyway must not include
these headers, and internal headers are never included after
"nm-default.h", as of the first previous point.
- Include all internal headers with quotes instead of angle brackets.
In practice it doesn't matter, because in our public headers we must
include other headers with angle brackets. As we use our public
headers also to compile our interal source files, effectively the
result must be the same. Still do it for consistency.
- Except for <config.h> itself. Include it with angle brackets as suggested by
https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
Rather than randomly including one or more of <glib.h>,
<glib-object.h>, and <gio/gio.h> everywhere (and forgetting to include
"nm-glib-compat.h" most of the time), rename nm-glib-compat.h to
nm-glib.h, include <gio/gio.h> from there, and then change all .c
files in NM to include "nm-glib.h" rather than including the glib
headers directly.
(Public headers files still have to include the real glib headers,
since nm-glib.h isn't installed...)
Also, remove glib includes from header files that are already
including a base object header file (which must itself already include
the glib headers).
config.h should be included from every .c file, and it should be
included before any other include. Fix that.
(As a side effect of how I did this, this also changes us to
consistently use "config.h" rather than <config.h>. To the extent that
it matters [which is not much], quotes are more correct anyway, since
we're talking about a file in our own build tree, not a system
include.)
Create NMIPConfig as the parent of NMIP4Config and NMIP6Config, and
remove the two subclasses from the public API; while it's convenient
to still have both internally, they are now identical to the outside
world.
NMActiveConnection:specific-object was renamed to
NMActiveConnection:specific-object-path in 677314c5, but it didn't
actually work, because of assumptions NMObject makes. Fix that.
In some cases, code may look at the value of an array-valued property
during object initialization, before NMObject has set it to its actual
initial value. So ensure that we initialize all such properties to an
empty array, rather than leaving them NULL.
Also fix another bug in NMClient that could result in
priv->active_connections being NULL during certain signal emissions,
and fix nm_client_get_active_connections() to not return NULL when NM
was not running.
NMActiveConnection:connection was an object path rather than an
NMRemoteConnection because in the past the NMObject property system
wasn't capable of handling NMRemoteConnection-valued properties.
NMActiveConnection:master was an object path rather than an NMDevice
entirely by accident. Fix both.
NMActiveConnection:specific-object can't currently be converted to an
object, because we don't know ahead of time what object type it is,
and NMObject can't deal with that. Instead, we rename it to
:specific-object-path (and likewise for its get function), both to
emphasize that it doesn't behave like other properties, and to leave
the old name open for an actual object-valued property later on.
Make enum- and flags-valued properties use GParamSpecEnum and
GParamSpecFlags, for better introspectability/bindability.
This requires no changes outside libnm-core/libnm since the expected
data size is still the same with g_object_get()/g_object_set(), and
GLib will internally convert between int/uint and enum/flags GValues
when using g_object_get_property()/g_object_set_property().
Port libnm-core/libnm to GDBus.
The NetworkManager daemon continues to use dbus-glib; the
previously-added connection hash/variant conversion methods are now
moved to NetworkManagerUtils (along with a few other utilities that
are now only needed by the daemon code).
NMObject has a system that lets devices and active connections get
created as the correct subtypes (NMDeviceFoo / NMActiveConnection vs
NMVpnConnection). But it was much more generic than it needed to be,
because NMDevice and NMActiveConnection both did the same thing (fetch
a D-Bus property and then look at its value). So move the
property-fetching part into NMObject, and only use the callback for
converting the property value to a GType.
Add _nm_object_class_add_interface(), for declaring that a class
implements a particular interface, and then have NMObject create the
corresponding proxies itself. (The subclass can get a copy with
_nm_object_get_proxy() if it needs it for something).
(In GDBus, creating a proxy is a heavier operation than in dbus-glib,
so we'll need to create the proxies asynchronously. Moving the
creation to NMObject makes that easier since we can do it as part
of the existing init/init_async.)
libnm functions that return GPtrArrays of objects had a rule that if
the array was empty, they would return NULL rather than a 0-length
array. As it turns out, this is just a nuisance to clients, since in
most places the code for the non-empty case would end up doing the
right thing for the empty case as well (and where it doesn't, we can
check "array->len == 0" just as easily as "array == NULL"). So just
return the 0-length array instead.
Use G_TYPE_PTR_ARRAY for GPtrArray-of-NMObject-valued properties,
because it has better introspection/bindings support.
As with the strdict change in libnm-core, we need to manually copy the
array in get_property() implementations, to preserve the standard
semantics that get_property() returns a copy, not the internal array.
(This patch also changes those properties so that they are always
non-NULL until dispose(); previously some of them could be either NULL
or 0-length at different times.)
"NetworkManager.h"'s name (and non-standard capitalization) suggest
that it's some sort of high-level super-important header, but it's
really just low-level D-Bus stuff. Rename it to "nm-dbus-interface.h"
and likewise "NetworkManagerVPN.h" to "nm-vpn-dbus-interface.h"
Remove _nm_object_ensure_inited(), etc; objects that implement
GInitable are now mandatory-to-init().
Remove constructor() implementations that sometimes return NULL; do
all the relevant checking in init() instead.
Make nm_client_new() and nm_remote_settings_new() take a GCancellable
and a GError**.
Rather than having each object type override constructed() to call
_nm_object_register_properties(), have NMObject call a virtual method
on the subclass to ask it to register them.
Move some code around in nm-client.c and nm-object.c so that all
D-Bus-related initialization happens in init_dbus(), and
non-D-Bus-related stuff stays in construct().
(This simplifies the next commit.)
GLib/Gtk have mostly settled on the convention that two-letter
acronyms in type names remain all-caps (eg, "IO"), but longer acronyms
become initial-caps-only (eg, "Tcp").
NM was inconsistent, with most long acronyms using initial caps only
(Adsl, Cdma, Dcb, Gsm, Olpc, Vlan), but others using all caps (DHCP,
PPP, PPPOE, VPN). Fix libnm and src/ to use initial-caps only for all
three-or-more-letter-long acronyms (and update nmcli and nmtui for the
libnm changes).
This commit begins creating the new "libnm", which will replace
libnm-util and libnm-glib.
The main reason for the libnm-util/libnm-glib split is that the daemon
needs to link to libnm-util (to get NMSettings, NMConnection, etc),
but can't link to libnm-glib (because it uses many of the same type
names as the NetworkManager daemon. eg, NMDevice). So the daemon links
to only libnm-util, but basically all clients link to both.
With libnm, there will be only a single client-visible library, and
NetworkManager will internally link against a private "libnm-core"
containing the parts that used to be in libnm-util.
(The "libnm-core" parts still need to be in their own directory so
that the daemon can see those header files without also seeing the
ones in libnm/ that conflict with its own headers.)
[This commit just copies the source code from libnm-util/ to
libnm-core/, and libnm-glib/ to libnm/:
mkdir -p libnm-core/tests/
mkdir -p libnm/tests/
cp libnm-util/*.[ch] libnm-util/nm-version.h.in libnm-core/
rm -f libnm-core/nm-version.h libnm-core/nm-setting-template.[ch] libnm-core/nm-utils-enum-types.[ch]
cp libnm-util/tests/*.[ch] libnm-core/tests/
cp libnm-glib/*.[ch] libnm/
rm -f libnm/libnm_glib.[ch] libnm/libnm-glib-test.c libnm/nm-glib-enum-types.[ch]
cp libnm-glib/tests/*.[ch] libnm/tests/
]
