* src/nm-hal-manager.c
- (nm_get_device_driver_name): use net.originating_device first, fall
back to physical device. HAL has deprecated physical_device.
* libnm-glib/nm-device.c
- (get_product_and_vendor): use net.originating_device first, fall
back to physical device. HAL has deprecated physical_device.
- (nm_device_update_description): s/physical_device_udi/orig_dev_udi
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3386 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-netlink.c
- (nm_netlink_get_default_handle): mistakenly removed too much code in
last commit; fix that
- (get_link_cache): print error string
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3385 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-netlink.c
- (nm_netlink_get_default_handle): NMNetlinkMonitor now uses libnl,
don't need this hack any more (Benoit Boissinot)
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3384 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (nm_policy_device_change_check): ensure that a previously active
device with a system connection has a link before denying a switch
to a user connection
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3369 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (link_timeout_cb): try again if scanning; deactivate the device when
activated if the link dies
- (supplicant_iface_connection_state_cb_handler): bump link timeout to
15 seconds
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3367 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
src/nm-device-802-11-wireless.h
- (nm_device_802_11_wireless_reset_scan_interval): remove, unused
elsewhere; fold into the sole user in nm-device-802-11-wireless.c
- (device_cleanup): reset the scan interval lower when the device
deactivates
- (can_scan): base decision mostly off device state, not supplicant
interface state since the supplicant interface state isn't a
great indicator of whether the device is active or not
- (request_wireless_scan): clean up; schedule the next scan here
- (schedule_scan): only back the scan interval off if a new scan
actually gets scheduled; and make scan intervals tighter when the
device is disconnected
- (supplicant_iface_state_cb_handler): fold in the bits of
nm_device_802_11_wireless_reset_scan_interval() by resetting scan
interval to minimum
- (activation_success_handler): reset scan interval to something
reasonable
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3365 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (device_cleanup): cleanup any association attempt that might be in
progress
- (nm_device_802_11_wireless_dispose): device_cleanup() already
destroys the AP list
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3344 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* libnm-util/nm-connection.c
libnm-util/nm-connection.h
- (nm_connection_compare): accept compare flags and pass them to the
setting compare function
* libnm-util/nm-setting.c
libnm-util/nm-setting.h
- (nm_setting_compare): accept compare flags; ignore properties that are
marked fuzzy
* libnm-util/nm-setting-connection.c
libnm-util/nm-setting-wireless.c
libnm-util/nm-setting-ppp.c
libnm-util/nm-setting-wired.c
- Mark some setting properties as ignorable when doing a fuzzy compare
* src/nm-device.c
- (device_activation_precheck): use exact compare
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3336 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (nm_policy_device_change_check): get scope off the connection, not
using the manager helper
* src/nm-manager.c
src/nm-manager.h
- (get_scope_for_proxy): rename from get_type_for_proxy()
- (connection_get_settings_cb): set scope and path on connection, not
using GObject data items
- (get_connection_for_proxy): don't need to return path, since that
can be gotten from the connection
- (get_connection_for_proxy): get path off the connection, not from
parameters
- (connection_removed_cb, connection_updated_cb): don't need to get
path from get_connection_for_proxy(); get scope off the connection
instead of using GObject data items
- (connection_added_default_handler, add_one_connection_element): use
nm_connection_get_path() not nm_manager_get_connection_dbus_path()
- (nm_manager_get_connection_dbus_path): remove
- (nm_manager_get_connection_scope): remove
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3335 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Global rename of NMConnectionSettings -> NMExportedConnection to cut down
on confusing names
* Add 'path' and 'scope' properties to NMConnection since both NM and the
applet were having to hack this in anyway. Remove the 'path' stuff from
NMExportedConnection
* Internally rename NMConnectionType -> NMConnectionScope
* Provide default implementations of the 'get_id' and 'get_settings' methods
of NMExportedConnection
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3334 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (device_cleanup): release the AP list here too so that the AP list
doesn't survive across suspend/resume and up/down. There is some
room for optimization, for example blow the list away when the card
brought back up, but only if the device has only been down for a
minute or more.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3322 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-3-ethernet.c
- (real_bring_up): save the supplicant interface state signal id
- (real_bring_down): disconnect from the supplicant interface state
signal
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3304 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (handle_auth_or_fail): new function; consolidate device activation
failure check after a certain number of failures getting secrets
- (supplicant_connection_timeout_cb, real_act_stage2_config,
real_act_stage4_ip_config_timeout): use handle_auth_or_fail() to fail
the connection if secrets were requested more than a few times
- (real_act_stage3_ip_config_start): don't clear the wireless secrets
tries here; otherwise they are cleared before the IP configure
timeout, which happens with open system WEP when key is wrong
- (activation_success_handler): clear wireless secrets tries here too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3296 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (connection_updated): clear invalid tag when connection gets updated
to allow that connection to be tried again
- (nm_policy_new): save signal ids so they can be disconnected when
the policy is destroyed
- (nm_policy_destroy): stop any in-progress state change idle handler,
and disconnect all signals from the manager object so that none
of the policy functions gets called after the policy is destroyed
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3295 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-manager.c
- (finalize): remove devices a bit earlier; clean up system settings
poke
- (nm_manager_name_owner_changed): clean up system settings poke when
the service appears, and try to restart it if it fails
- (poke_system_settings_daemon_cb): try to get the system settings
service started through D-Bus service activation
- (initial_get_connections): start the system settings daemon if it's
not already running
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3293 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/supplicant-manager/nm-supplicant-manager.c
- (poke_supplicant_cb): reschedule the poke as a timeout, don't let
glib automatically reschedule
- (nm_supplicant_manager_init): immediately try to start the supplicant
- (nm_supplicant_manager_name_owner_changed): immediately try to restart
the supplicant
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3285 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (device_state_changed): schedule a change check when a device gets
deactivated so something happens if you disconnect GSM/CDMA
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3284 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* include/NetworkManager.h
- Add CDMA mobile broadband card device type
* src/nm-hal-manager.c
- (modem_device_creator): handle both CDMA and GSM modems; the device
must now be tagged with 'cdma' or 'gsm' capability
* src/nm-cdma-device.c
src/nm-cdma-device.h
src/Makefile.am
- Add the CDMA mobile broadband card device class
* libnm-util/nm-connection.c
- (register_default_settings): add NMSettingCdma
* libnm-util/nm-setting-cdma.c
libnm-util/nm-setting-cdma.h
libnm-util/Makefile.am
- Add the CDMA mobile broadband card setting class
* libnm-glib/nm-cdma-device.c
libnm-glib/nm-cdma-device.h
libnm-glib/Makefile.am
- Add the CDMA mobile broadband card GLib proxy class
* libnm-glib/nm-client.c
- (get_device): handle CDMA devices too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3261 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/ppp-manager/nm-ppp-manager.c
- (ip4_config_get): set peer address too
* src/ppp-manager/nm-pppd-plugin.c
- (nm_ip_up): try harder to get the peer's address
* src/NetworkManagerSystem.c
- (nm_system_device_set_from_ip4_config): if the IP4Config has a peer
address, use that too. Otherwise, some PPP connections won't work.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3260 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerPolicy.c
- (nm_policy_device_change_check): system connections override user
connections; don't activate a user connection if there's a currently
active system connection, and new, better system connections always
interrupt user connections
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3258 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-3-ethernet.c
- (find_best_connection): check MAC address too
- (real_get_best_connection): let autoconnect=True connections activate
for devices that don't have carrier detection
* src/nm-device-802-11-wireless.c
- (find_best_connection): check MAC address too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3248 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-3-ethernet.c
- (nm_device_802_3_ethernet_carrier_on,
nm_device_802_3_ethernet_carrier_off): ignore any spurious netlink
carrier events that might come in for devices that don't support
carrier detect
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3245 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-interface.c
- (nm_device_interface_check_connection_conflicts): need to actually
get the interface, not cast to the object
* src/nm-device.c
- (nm_device_check_connection_conflicts): need to get the device class,
not cast the device to the device class
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3244 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-manager.c
- (check_connection_allowed): take an NMDeviceInterface instead of
an NMDevice object as an argument
- (nm_manager_activate_device): pass an NMDeviceInterface to
check_connection_allowed()
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3241 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device-802-11-wireless.c
- (activation_success_handler): if a match was found in the scan list
and that match is a hidden AP, update that AP's SSID
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3236 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManagerAP.c
- (nm_ap_new_fake_from_connection): mark fake APs as fake
* src/nm-device-802-11-wireless.c
- (get_active_ap): do two passes over the scan list if the caller
requests that hidden APs get matched too; during the second pass
when matching hidden APs, ignore the SSID since hidden APs in the
scan list don't have an SSID yet
- (periodic_update): move some checks to
nm_device_802_11_periodic_update() because not all callers need them
- (nm_device_802_11_periodic_update): move some checks here from
perodic_update()
- (merge_scanned_ap): if the current AP is fake, then don't do strict
matching on incoming scan results, because the fake AP's flags
might be slightly different (yet still compatible) with the incoming
scan result's flags and they might actually be the same AP; update
the rate on merged APs too
- (activation_success_handler): update the frequency of the fake AP
on successful connection; match hidden APs too since if the
current AP is fake, there might already be a scan result in the
scan list for the desired AP, just without it's SSID filled in yet
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3235 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Fix gnome.org #464215. Requires the kernel patch titled
"Introduce WEXT scan capabilities" but will handle the patch not being
present, you'll just continue to have problems with hidden SSIDs when
using mac80211-based drivers.
* src/supplicant-manager/nm-supplicant-config.h
src/supplicant-manager/nm-supplicant-config.c
- (nm_supplicant_config_add_setting_wireless): new parameter to indicate
whether the driver supports SSID scans or not. If it does, and if
the AP is hidden, use ap_scan=1 instead of ap_scan=2
* src/nm-device-802-11-wireless.c
- (constructor): check whether or not the driver supports SSID scans
- (build_supplicant_config): pass driver SSID scan capability when
building the wireless bits of the supplicant config
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3230 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/nm-device.c
src/nm-device.h
- (device_activation_precheck, check_connection_complete): remove this
virtual function; incomplete connections should be invalid by
definition, complete-ness should be checked in the setting's
verify function
* src/nm-serial-device.c
src/nm-gsm-device.c
- (real_check_connection_complete): remove
* libnm-util/nm-setting-serial.c
- (verify): new function; ensure there is a PPP setting too
* libnm-util/nm-setting-gsm.c
- (verify): ensure there is a serial setting too
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3225 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
