At the moment, the access point mode uses 20MHz channels. Introduce a
new 'wifi.channel-width' property that allows the use of a larger
bandwidth, thus increasing performances.
The purpose of this is to allow overriding to_dbus_fcn and from_dbus_fcn when
necessary (such as for special behavior regarding a deprecated/aliased properties).
The comparison checking for MAC address equality had previously been flipped around.
Fixes: b084ad7f2b ('libnm-core: canonicalize hardware addresses in settings')
Most string properties should not accept empty strings. Add a generic
way to reject them during verify.
Add a new flag NMSettInfoProperty.direct_string_allow_empty.
Note that properties must opt-in to allow empty values. Since all
existing properties didn't have this check (but hopefully re-implemented
it in verify()), all existing properties get this flag set to TRUE.
The main point here it that new properties get the strict check by
default.
We should also review existing uses of direct_string_allow_empty,
whether the flag can be cleared. This can be done if verify() already
enforces a non-empty string, or if we accept to break behavior by
tightening up the check.
The previous code is not entirely obvious, because as always,
verify() and normalize() must agree in what they are about to
do.
Make that clearer by adding _nm_setting_wireless_normalize_mac_address_randomization(),
which evaluates the desired settings. This is the used both by verify()
and normalize().
Add a new "stable-ssid" mode that generates the MAC address based on the
Wi-Fi's SSID.
Note that this gives the same MAC address as setting
connection.stable-id="${NETWORK_SSID}"
wifi.cloned-mac-address="stable"
The difference is that changing the stable ID of a profile also affects
"ipv6.addr-gen-mode=stable-privacy" and other settings.
Use _nm_setting_property_define_gprop_strv_oldstyle() for all existing
(remaining) G_TYPE_STRV properties.
The benefit is that the properties_override array already lists the
property, and we don't need special hacks in _nm_setting_class_commit()
to initialize those properties.
Also, this style is discouraged. We can now easier find all properties
that should be reworked.
For settings with many properties, pre-allocate a larger buffer via
_nm_sett_info_property_override_create_array_sized().
The buffer is larger than needed, so when we add more properties it
still works. In any case, GArray will grow automatically, so getting
this wrong is not fatal (just suboptimal).
Historically, the NMSetting types were in public headers. Theoretically,
that allowed users to subtype our classes. However in practice that was
impossible because they lacked required access to internal functions to
fully create an NMSetting class outside of libnm. And it also was not
useful, because you simply cannot extend libnm by subtyping a libnm
class. And supporting such a use case would be hard and limit what we can
do in libnm.
Having GObject structs in public headers also require that we don't
change it's layout. The ABI of those structs must not change, if anybody
out there was actually subclassing our GObjects.
In libnm 1.34 (commit e46d484fae ('libnm: hide NMSetting types from
public headers')) we moved the structs from headers to internal.
This would have caused a compiler error if anybody was using those
struct definitions. However, we still didn't change the ABI/layout so
that we didn't break users who relied on it (for whatever reason).
It doesn't seem there were any affected user. We waited long enough.
Change internal ABI.
No longer use g_type_class_add_private(). Instead, embed the private
structs directly (_NM_GET_PRIVATE()) or indirectly
(_NM_GET_PRIVATE_PTR()) in the object.
The main benefit is for debugging in the debugger, where we can now
easily find the private data. Previously that was so cumbersome to be
effectively impossible.
It's also the fastest possible way, since NM_SETTING_*_GET_PRIVATE()
literally resolves to "&self->_priv" (plus static asserts and
nm_assert() for type checking).
_NM_GET_PRIVATE() also propagates constness and requires that the
argument is a compatible pointer type (at compile time).
Note that g_type_class_add_private() is also deprecated in glib 2.58 and
replaced by G_ADD_PRIVATE(). For one, we still don't rely on 2.58. Also,
G_ADD_PRIVATE() is a worse solution as it supports a usecase that we
don't care for (public structs in headers). _NM_GET_PRIVATE() is still
faster, works with older glib and most importantly: is better for
debugging as you can find the private data from an object pointer.
For NMSettingIPConfig this is rather awkward, because all direct
properties require a common "klass->private_offset". This was however
the case before this change. Nothing new here. And if you ever touch
this and do something wrong, many unit tests will fail. It's almost
impossible to get wrong, albeit it can be confusing to understand.
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1773
GArray.data is a char pointer. Most of the time we track other data in
a GArray. Casting that pointer can trigger "-Wcast-align=strict"
warnings.
Avoid them. Most of the time, instead use the nm_g_array*() helpers,
which also assert that the expected element size is correct.
These variants provide additional nm_assert() checks, and are thus
preferable.
Note that we cannot just blindly replace &g_array_index() with
&nm_g_array_index(), because the latter would not allow getting a
pointer at index [arr->len]. That might be a valid (though uncommon)
usecase. The correct replacement of &g_array_index() is thus
nm_g_array_index_p().
I checked the code manually and replaced uses of nm_g_array_index_p()
with &nm_g_array_index(), if that was a safe thing to do. The latter
seems preferable, because it is familar to &g_array_index().
We use clang-format for automatic formatting of our source files.
Since clang-format is actively maintained software, the actual
formatting depends on the used version of clang-format. That is
unfortunate and painful, but really unavoidable unless clang-format
would be strictly bug-compatible.
So the version that we must use is from the current Fedora release, which
is also tested by our gitlab-ci. Previously, we were using Fedora 34 with
clang-tools-extra-12.0.1-1.fc34.x86_64.
As Fedora 35 comes along, we need to update our formatting as Fedora 35
comes with version "13.0.0~rc1-1.fc35".
An alternative would be to freeze on version 12, but that has different
problems (like, it's cumbersome to rebuild clang 12 on Fedora 35 and it
would be cumbersome for our developers which are on Fedora 35 to use a
clang that they cannot easily install).
The (differently painful) solution is to reformat from time to time, as we
switch to a new Fedora (and thus clang) version.
Usually we would expect that such a reformatting brings minor changes.
But this time, the changes are huge. That is mentioned in the release
notes [1] as
Makes PointerAligment: Right working with AlignConsecutiveDeclarations. (Fixes https://llvm.org/PR27353)
[1] https://releases.llvm.org/13.0.0/tools/clang/docs/ReleaseNotes.html#clang-format
"direct" properties are the latest preferred way to implement GObject
base properties. That way, the property meta data tracks the
"direct_type" and the offset where to find the data in the struct.
That way, we can automatically
- initialize the default values
- free during finalize
- implement get_property()/set_property()
Also, the other settings operations (compare, to/from D-Bus) are
implemented more efficiently and don't need to go through
g_object_get_property()/GValue API.
Certain properties need to release memory when destroying the NMSetting.
For "direct" properties, we have all the information we need to do that
generically in the NMSetting base class. In practice, this only concerns
string properties.
See _finalize_direct() in "nm-setting.c".
However, if the NMSetting base class takes care of freeing the strings,
then the subclasses must not also unref the variable (to avoid double free).
Previously, subclasses had to opt-in for the base class to indicate that
they are fine with that.
Now, let the base class always handle it. We only need to make sure that
classes that implement direct string properties don't also try to free
the values during destruction.
Note that most implementations use g_object_set(), and it's not
easy to detect modification. In those cases, we assume that modification
happened -- just like also the GObject setter will emit a notification
(as none of our properties use G_PARAM_EXPLICIT_NOTIFY).
These functions tend to have many arguments. They are also quite som
boilerplate to implement the hundereds of properties we have, while
we want that properties have common behaviors and similarities.
Instead of repeatedly spelling out the function arguments, use a macro.
Advantages:
- the usage of a _NM_SETT_INFO_PROP_*_FCN_ARGS macro signals that this
is an implementation of a property. You can now grep for these macros
to find all implementation. That was previously rather imprecise, you
could only `git grep '\.to_dbus_fcn'` to find the uses, but not the
implementations.
As the goal is to keep properties "similar", there is a desire to
reduce the number of similar implementations and to find them.
- changing the arguments now no longer will require you to go through
all implementations. At least not, if you merely add an argument that
has a reasonable default behavior and does not require explicit
handling by most implementation.
- it's convenient to be able to patch the argument list to let the
compiler help to reason about something. For example, the
"connection_dict" argument to from_dbus_fcn() is usually unused.
If you'd like to find who uses it, rename the parameter, and
review the (few) compiler errors.
- it does save 573 LOC of boilerplate with no actual logic or useful
information. I argue, that this simplifies the code and review, by
increasing the relative amount of actually meaningful code.
Disadvantages:
- the user no longer directly sees the argument list. They would need
cscope/ctags or an IDE to jump to the macro definition and conveniently
see all arguments.
Also use _nm_nil, so that clang-format interprets this as a function
parameter list. Otherwise, it formats the function differently.
Naming is important, because the name of a thing should give you a good
idea what it does. Also, to find a thing, it needs a good name in the
first place. But naming is also hard.
Historically, some strv helper API was named as nm_utils_strv_*(),
and some API had a leading underscore (as it is internal API).
This was all inconsistent. Do some renaming and try to unify things.
We get rid of the leading underscore if this is just a regular
(internal) helper. But not for example from _nm_strv_find_first(),
because that is the implementation of nm_strv_find_first().
- _nm_utils_strv_cleanup() -> nm_strv_cleanup()
- _nm_utils_strv_cleanup_const() -> nm_strv_cleanup_const()
- _nm_utils_strv_cmp_n() -> _nm_strv_cmp_n()
- _nm_utils_strv_dup() -> _nm_strv_dup()
- _nm_utils_strv_dup_packed() -> _nm_strv_dup_packed()
- _nm_utils_strv_find_first() -> _nm_strv_find_first()
- _nm_utils_strv_sort() -> _nm_strv_sort()
- _nm_utils_strv_to_ptrarray() -> nm_strv_to_ptrarray()
- _nm_utils_strv_to_slist() -> nm_strv_to_gslist()
- nm_utils_strv_cmp_n() -> nm_strv_cmp_n()
- nm_utils_strv_dup() -> nm_strv_dup()
- nm_utils_strv_dup_packed() -> nm_strv_dup_packed()
- nm_utils_strv_dup_shallow_maybe_a() -> nm_strv_dup_shallow_maybe_a()
- nm_utils_strv_equal() -> nm_strv_equal()
- nm_utils_strv_find_binary_search() -> nm_strv_find_binary_search()
- nm_utils_strv_find_first() -> nm_strv_find_first()
- nm_utils_strv_make_deep_copied() -> nm_strv_make_deep_copied()
- nm_utils_strv_make_deep_copied_n() -> nm_strv_make_deep_copied_n()
- nm_utils_strv_make_deep_copied_nonnull() -> nm_strv_make_deep_copied_nonnull()
- nm_utils_strv_sort() -> nm_strv_sort()
Note that no names are swapped and none of the new names existed
previously. That means, all the new names are really new, which
simplifies to find errors due to this larger refactoring. E.g. if
you backport a patch from after this change to an old branch, you'll
get a compiler error and notice that something is missing.
A MAC address is a relatively common "type". The GObject property is of type string,
but the D-Bus type is a bytestring ("ay"). We will need a special NMSettInfoPropertType.
Note that like most implementations, the from-dbus implementation still is based
on GObject setters. This will change in the future.
Also note that the previous compare function was
_nm_setting_property_compare_fcn_default(). That is, it used to convert
the property to GVariant and compare those. The conversion to GVariant
in that case normalizes the string (e.g. it is case insensitive). Also,
only properties could be compared which were also convertible to D-Bus
(which is probably fine, because there is no guarantee the profiles that
don't verify can be compared).
The code now uses the direct comparison of the strings. That mostly
preserves the case-insensitivity of the previous comparison, because
the property setters for mac addresses all use
_nm_utils_hwaddr_canonical_or_invalid() to normalize the strings.
This is subtle, but still correct. Note that this will improve later,
by ensuring that the property setters for mac addresses automatically
perform the right normalization.
The aim is that properties have a "type", that is, that similar
properties share a common behavior and appearance.
Most properties of type "mac-address" normalize the string in the
GObject property setter. Three don't. Let them also do that.
This is also relevant, because the compare function for mac-addresses
(_nm_setting_property_compare_fcn_default()) converts the properties
first to a "ay" GVariant. Which means the comparison is case
insensitive. Normalizing the values in the setter avoids that
inconsistency.
So far, we only have NMSettingClass.compare_property() hook.
The ugliness is that this hook is per-setting, when basically
all implementations only compare one property.
It feels cleaner to have a per-property hook and call that consistently.
In step one, we give all properties (the same) compare_fcn() implementation,
which delegates to the existing NMSettingClass.compare_property().
In a second step, this will be untangled.
There is one problem with this approach: NMSettInfoPropertType grows by
one pointer size, and we have potentially many such types. That should
be addressed by unifying types in the future.
Various NMSetting API would accept a property_idx parameter. Together
with the NMSettInfoSetting instance, this was useful to find the actual
NMSettInfoProperty instance.
The idea was, to provide the most of the functionality. That is, if you
might need the property_idx too, you had it -- after all, the
property_info you could lookup yourself.
However,
- literally zero users care about the property_idx. The care about
the property_info.
- if the user really, really required the property_idx, then it
is a given that it can be easily computed by
(property_info - sett_info->property_infos)
