fdo-mirrors/NetworkManager
1
0
Fork 0
mirror of https://gitlab.freedesktop.org/NetworkManager/NetworkManager.git synced 2025-12-23 13:10:08 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions
NetworkManager/src/nm-iface-helper.c

613 lines
20 KiB
C
Raw Normal View History

iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
/* -*- Mode: C; tab-width: 4; indent-tabs-mode: t; c-basic-offset: 4 -*- */
/* NetworkManager -- Network link manager
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Copyright (C) 2014 Red Hat, Inc.
*/
all: cleanup includes and let "nm-default.h" include "config.h" - All internal source files (except "examples", which are not internal) should include "config.h" first. As also all internal source files should include "nm-default.h", let "config.h" be included by "nm-default.h" and include "nm-default.h" as first in every source file. We already wanted to include "nm-default.h" before other headers because it might contains some fixes (like "nm-glib.h" compatibility) that is required first. - After including "nm-default.h", we optinally allow for including the corresponding header file for the source file at hand. The idea is to ensure that each header file is self contained. - Don't include "config.h" or "nm-default.h" in any header file (except "nm-sd-adapt.h"). Public headers anyway must not include these headers, and internal headers are never included after "nm-default.h", as of the first previous point. - Include all internal headers with quotes instead of angle brackets. In practice it doesn't matter, because in our public headers we must include other headers with angle brackets. As we use our public headers also to compile our interal source files, effectively the result must be the same. Still do it for consistency. - Except for <config.h> itself. Include it with angle brackets as suggested by https://www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Headers
2016-02-19 14:57:48 +01:00
#include "nm-default.h"
all: consistently include config.h config.h should be included from every .c file, and it should be included before any other include. Fix that. (As a side effect of how I did this, this also changes us to consistently use "config.h" rather than <config.h>. To the extent that it matters [which is not much], quotes are more correct anyway, since we're talking about a file in our own build tree, not a system include.)
2014-11-13 10:07:02 -05:00
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
#include <glib-unix.h>
#include <getopt.h>
#include <locale.h>
#include <errno.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
#include <sys/resource.h>
#include <sys/stat.h>
#include <signal.h>
nm-iface-helper: fix pidfile name and obtain the ifindex earlier The @ifindex is needed for the @pidfile. Obtain the @ifindex earlier without resorting to platform.
2015-03-15 17:18:59 +01:00
/* Cannot include <net/if.h> due to conflict with <linux/if.h>.
* Forward declare if_nametoindex. */
extern unsigned int if_nametoindex (const char *__ifname);
systemd: split "nm-sd.h" out of "nm-sd-adapt.h" Now we have: "nm-sd.h" is a header file of NetworkManager with utilities related to systemd. It can be used anywhere freely. Also, systemd headers that are considered public API (like "sd-event.h") can be used without restrictions. When compiling the systemd sources, we always must include "nm-sd-adapt.h" as first. Similarly, systemd headers must not include "nm-sd-adapt.h", because they are either public (in which case the adapter is not needed) or they are internal (in which case they are themself included via a systemd source). Sometimes, we must internal API (like "dhcp-lease-internal.h"). In this case, we also must include "nm-sd-adapt.h".
2016-03-11 10:25:40 +01:00
#include "main-utils.h"
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
#include "NetworkManagerUtils.h"
#include "nm-linux-platform.h"
#include "nm-dhcp-manager.h"
#include "nm-rdisc.h"
#include "nm-lndp-rdisc.h"
#include "nm-utils.h"
core: add support for RFC7217 stable privacy addressing RFC7217 introduces an alternative mechanism for creating addresses during stateless IPv6 address configuration. It's supposed to create addresses whose host part stays stable in a particular network but changes when the hosts enters another network to mitigate possibility of tracking the host movement. It can be used alongside RFC 4941 privacy extensions (temporary addresses) and replaces the use of RFC 4862 interface identifiers. The address creation mode is controlld by ip6.addr_gen_mode property (ADDR_GEN_MODE in ifcfg-rh), with values of "stable-privacy" and "eui-64", defaulting to "eui-64" if unspecified. The host part of an address is computed by hashing a system-specific secret salted with various stable values that identify the connection with a secure hash algorithm: RID = F(Prefix, Net_Iface, Network_ID, DAD_Counter, secret_key) For NetworkManager we use these parameters: * F() SHA256 hash function. * Prefix This is a network part of the /64 address * Net_Iface We use the interface name (e.g. "eth0"). This ensures the address won't change with the change of interface hardware. * Network_ID We use the connection UUID here. This ensures the salt is different for wireless networks with a different SSID as suggested by RFC7217. * DAD_Counter A per-address counter that increases with each DAD failure. * secret_key We store the secret key in /var/lib/NetworkManager/secret_key. If it's shorter than 128 bits then it's rejected. If the file is not present we initialize it by fetching 256 pseudo-random bits from /dev/urandom on first use. Duplicate address detection uses IDGEN_RETRIES = 3 and does not utilize the IDGEN_DELAY delay (despite it SHOULD). This is for ease of implementation and may change in future. Neither parameter is currently configurable.
2015-10-03 19:44:27 +02:00
#include "nm-setting-ip6-config.h"
build: don't add systemd path the include search path Our internal copy of systemd should not be in the search path. Instead, let users only #include "systemd/nm-sd.h" which then includes everything from systemd that we need. We want to avoid to accidentally include anything from our systemd-copy. Any user of that should only include "nm-sd.h", which then includes everything that is needed further. For example, "src/devices/wwan/nm-modem-manager.c" has #include <systemd/nm-daemon.h> which in turn includes #include "_sd-common.h" This works all correctly before, because #include "" will first look in the directory where sd-daemon.h is. However, our mixing of external systemd library and internal copy is rather dangerous. Try to avoid it further by keeping the include paths clean.
2016-09-27 13:35:29 +02:00
#include "systemd/nm-sd.h"
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
#if !defined(NM_DIST_VERSION)
# define NM_DIST_VERSION VERSION
#endif
#define NMIH_PID_FILE_FMT NMRUNDIR "/nm-iface-helper-%d.pid"
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
/*****************************************************************************/
static struct {
GMainLoop *main_loop;
int ifindex;
} gl/*obal*/ = {
.ifindex = -1,
};
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
static struct {
gboolean slaac;
gboolean show_version;
gboolean become_daemon;
gboolean debug;
gboolean g_fatal_warnings;
gboolean slaac_required;
gboolean dhcp4_required;
int tempaddr;
char *ifname;
char *uuid;
core: prefer connection.stable-id to generate IPv6 stable privacy addresses The Network_ID for generating RFC 7217 stable privacy IPv6 addresses is by default the UUID of the connection. Alternatively, prefer "connection.stable-id" as Network_ID to generate the stable addresses. This allows to configure a set of connections that all use the same Network_ID for generating stable addresses. Note that the stable-id and the UUID do no overlap, that is two connections [connection] uuid=uuid1 stable-id= and [connection] uuid=uuid2 stable-id=uuid1 generate distinct addresses.
2016-06-21 18:07:56 +02:00
char *stable_id;
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
char *dhcp4_address;
char *dhcp4_clientid;
char *dhcp4_hostname;
dhcp4: send FQDN option when ipv4.dhcp-fqdn is set Modify the 3 DHCP client backends to support the new property.
2015-10-13 15:13:26 +02:00
char *dhcp4_fqdn;
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
char *iid_str;
core: add support for RFC7217 stable privacy addressing RFC7217 introduces an alternative mechanism for creating addresses during stateless IPv6 address configuration. It's supposed to create addresses whose host part stays stable in a particular network but changes when the hosts enters another network to mitigate possibility of tracking the host movement. It can be used alongside RFC 4941 privacy extensions (temporary addresses) and replaces the use of RFC 4862 interface identifiers. The address creation mode is controlld by ip6.addr_gen_mode property (ADDR_GEN_MODE in ifcfg-rh), with values of "stable-privacy" and "eui-64", defaulting to "eui-64" if unspecified. The host part of an address is computed by hashing a system-specific secret salted with various stable values that identify the connection with a secure hash algorithm: RID = F(Prefix, Net_Iface, Network_ID, DAD_Counter, secret_key) For NetworkManager we use these parameters: * F() SHA256 hash function. * Prefix This is a network part of the /64 address * Net_Iface We use the interface name (e.g. "eth0"). This ensures the address won't change with the change of interface hardware. * Network_ID We use the connection UUID here. This ensures the salt is different for wireless networks with a different SSID as suggested by RFC7217. * DAD_Counter A per-address counter that increases with each DAD failure. * secret_key We store the secret key in /var/lib/NetworkManager/secret_key. If it's shorter than 128 bits then it's rejected. If the file is not present we initialize it by fetching 256 pseudo-random bits from /dev/urandom on first use. Duplicate address detection uses IDGEN_RETRIES = 3 and does not utilize the IDGEN_DELAY delay (despite it SHOULD). This is for ease of implementation and may change in future. Neither parameter is currently configurable.
2015-10-03 19:44:27 +02:00
NMSettingIP6ConfigAddrGenMode addr_gen_mode;
logging: make use of journal configurable
2015-07-08 19:34:34 +02:00
char *logging_backend;
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
char *opt_log_level;
char *opt_log_domains;
main: refactor early setup in main() Move call to nm_main_utils_early_setup() to a separate function. Also move the @options array away from the main function, saving a few bytes on the stack. Now only do_early_setup() modifies the @global_opt structure.
2015-03-13 20:09:46 +01:00
guint32 priority_v4;
guint32 priority_v6;
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
} global_opt = {
.tempaddr = NM_SETTING_IP6_CONFIG_PRIVACY_UNKNOWN,
main: refactor early setup in main() Move call to nm_main_utils_early_setup() to a separate function. Also move the @options array away from the main function, saving a few bytes on the stack. Now only do_early_setup() modifies the @global_opt structure.
2015-03-13 20:09:46 +01:00
.priority_v4 = NM_PLATFORM_ROUTE_METRIC_DEFAULT_IP4,
.priority_v6 = NM_PLATFORM_ROUTE_METRIC_DEFAULT_IP6,
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
};
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
/*****************************************************************************/
iface-helper: use logging macros
2016-10-05 12:04:46 +02:00
#define _NMLOG_PREFIX_NAME "nm-iface-helper"
#define _NMLOG(level, domain, ...) \
nm_log ((level), (domain), \
iface-helper: set logging prefix
2016-10-05 15:34:06 +02:00
"iface-helper: " _NM_UTILS_MACRO_FIRST (__VA_ARGS__) \
iface-helper: use logging macros
2016-10-05 12:04:46 +02:00
_NM_UTILS_MACRO_REST (__VA_ARGS__))
/*****************************************************************************/
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
static void
dhcp4_state_changed (NMDhcpClient *client,
NMDhcpState state,
NMIP4Config *ip4_config,
GHashTable *options,
device: accept multiple addresses in a DHCPv6 lease When the DHCPv6 lease received from the server contains multiple addresses, dhclient generates a new BOUND event for each of them. Instead of overwriting the previous IP6 configuration for each BOUND event, we should try to detect if the new configuration belongs to the same lease and merge its addresses with the existing one in such case. This allows NetworkManager to configure multiple addresses on an interface via DHCPv6. https://bugzilla.gnome.org/show_bug.cgi?id=681764 https://bugzilla.redhat.com/show_bug.cgi?id=1244293
2015-08-04 11:30:03 +02:00
const char *event_id,
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
gpointer user_data)
{
static NMIP4Config *last_config = NULL;
NMIP4Config *existing;
g_return_if_fail (!ip4_config || NM_IS_IP4_CONFIG (ip4_config));
iface-helper: use logging macros
2016-10-05 12:04:46 +02:00
_LOGD (LOGD_DHCP4, "new DHCPv4 client state %d", state);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
switch (state) {
case NM_DHCP_STATE_BOUND:
g_assert (ip4_config);
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
existing = nm_ip4_config_capture (gl.ifindex, FALSE);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
if (last_config)
nm_ip4_config_subtract (existing, last_config);
core: add @merge_flags argument to nm_ip4_config_merge() and nm_ip6_config_merge() The new flags are not yet used, so there is no change in functionality. The flags NM_IP_CONFIG_MERGE_NO_ROUTES and NM_IP_CONFIG_MERGE_NO_DNS go together with the 'ignore-auto-routes' and 'ignore-auto-dns' setting. Note that for IPv4, NM_IP_CONFIG_MERGE_NO_DNS also ignores NIS, WINS, and dns-options. This is different from current other places that handle 'ignore-auto-dns' and only care about nameservers, domains, and searches.
2015-08-05 10:01:39 +02:00
nm_ip4_config_merge (existing, ip4_config, NM_IP_CONFIG_MERGE_DEFAULT);
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
if (!nm_ip4_config_commit (existing, gl.ifindex, TRUE, global_opt.priority_v4))
iface-helper: use logging macros
2016-10-05 12:04:46 +02:00
_LOGW (LOGD_DHCP4, "failed to apply DHCPv4 config");
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
nm-iface-helper: set last_config properly Update last_config outside of the conditional; otherwise it will always remain set to NULL. Signed-off-by: David Ward <david.ward@ll.mit.edu> Acked-By: Thomas Haller <thaller@redhat.com>
2015-04-24 22:38:21 -04:00
if (last_config)
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
g_object_unref (last_config);
nm-iface-helper: set last_config properly Update last_config outside of the conditional; otherwise it will always remain set to NULL. Signed-off-by: David Ward <david.ward@ll.mit.edu> Acked-By: Thomas Haller <thaller@redhat.com>
2015-04-24 22:38:21 -04:00
last_config = nm_ip4_config_new (nm_dhcp_client_get_ifindex (client));
nm_ip4_config_replace (last_config, ip4_config, NULL);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
break;
case NM_DHCP_STATE_TIMEOUT:
case NM_DHCP_STATE_DONE:
case NM_DHCP_STATE_FAIL:
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
if (global_opt.dhcp4_required) {
iface-helper: use logging macros
2016-10-05 12:04:46 +02:00
_LOGW (LOGD_DHCP4, "DHCPv4 timed out or failed, quitting...");
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
g_main_loop_quit (gl.main_loop);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
} else
iface-helper: use logging macros
2016-10-05 12:04:46 +02:00
_LOGW (LOGD_DHCP4, "DHCPv4 timed out or failed");
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
break;
default:
break;
}
}
static void
rdisc: hide internal fields from NMRDisc API Hide the mutable fields that were exposed to the user of the NMRDisc API. Instead, only expose a constant NMRDiscData structure.
2016-07-07 13:25:38 +02:00
rdisc_config_changed (NMRDisc *rdisc, const NMRDiscData *rdata, guint changed_int, gpointer user_data)
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
{
rdisc: hide internal fields from NMRDisc API Hide the mutable fields that were exposed to the user of the NMRDisc API. Instead, only expose a constant NMRDiscData structure.
2016-07-07 13:25:38 +02:00
NMRDiscConfigMap changed = changed_int;
iface-helper: fix RA processing with more than one router We construct new IP6Config on each rdisc_config_changed(). That's not a smart thing to do, since that makes us throw away the previous configuration. In case the two routers on the same network, the first RA triggers rdisc_config_changed() for changed gateway and addresses. On handling the second RA rdisc_config_changed() doesn't add the address, resulting in the address being removed on ip6 config sync. A side effect of this is that the address is still tentative, resulting in DAD retry and an new address being added. So the networking still works, but at the expense of a single DAD failure and an address that's perhaps different from what was expected.
2016-03-03 15:35:14 +01:00
static NMIP6Config *rdisc_config = NULL;
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
NMIP6Config *existing;
static int system_support = -1;
platform: adjust type of IPv6 address flags to guint Address flags inside 'struct ifaddrmsg' are uint8_t and they are extended to uint32_t via IFA_FLAGS. Change it to be guint32.
2016-02-29 15:36:12 +01:00
guint32 ifa_flags = 0x00;
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
int i;
if (system_support == -1) {
/*
platform: create netlink messages directly without libnl-route-3 Instead of using libnl-route-3 library to serialize netlink messages, construct the netlink messages ourselves. This has several advantages: - Creating the netlink message ourself is actually more straight forward then having an intermediate layer between NM and the kernel. Now it is immediately clear, how a platform request translates to a netlink/kernel request. You can look at the kernel sources how a certain netlink attribute behaves, and then it's immediately clear how to set that (and vice versa). - Older libnl versions might have bugs or missing features for which we needed to workaround (often by offering a reduced/broken/untested functionality). Now we can get rid or workaround like _nl_has_capability(), check_support_libnl_extended_ifa_flags(), HAVE_LIBNL_INET6_TOKEN. Another example is a libnl bug when setting vlan ingress map which isn't even yet fixed in libnl upstream. - We no longer need libnl-route-3 at all and can drop that runtime requirement, saving some 400k. Constructing the messages ourselves also gives better performance because we don't have to create the intermediate libnl object. - In the future we will add more link-type support which is easier to support by basing directly on the plain kernel/netlink API, instead of requiring also libnl3 to expose this functionality. E.g. adding macvtap support: we already parsed macvtap properties ourselves because of missing libnl support. To *add* macvtap support, we also would have to do it ourself (or extend libnl).
2015-10-20 09:27:16 +02:00
* Check, whether kernel is recent enough, to help user space handling RA.
* If it's not supported, we have no ipv6-privacy and must add autoconf
* addresses as /128.
* The reason for the /128 is to prevent the kernel
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
* from adding a prefix route for this address.
**/
platform: create netlink messages directly without libnl-route-3 Instead of using libnl-route-3 library to serialize netlink messages, construct the netlink messages ourselves. This has several advantages: - Creating the netlink message ourself is actually more straight forward then having an intermediate layer between NM and the kernel. Now it is immediately clear, how a platform request translates to a netlink/kernel request. You can look at the kernel sources how a certain netlink attribute behaves, and then it's immediately clear how to set that (and vice versa). - Older libnl versions might have bugs or missing features for which we needed to workaround (often by offering a reduced/broken/untested functionality). Now we can get rid or workaround like _nl_has_capability(), check_support_libnl_extended_ifa_flags(), HAVE_LIBNL_INET6_TOKEN. Another example is a libnl bug when setting vlan ingress map which isn't even yet fixed in libnl upstream. - We no longer need libnl-route-3 at all and can drop that runtime requirement, saving some 400k. Constructing the messages ourselves also gives better performance because we don't have to create the intermediate libnl object. - In the future we will add more link-type support which is easier to support by basing directly on the plain kernel/netlink API, instead of requiring also libnl3 to expose this functionality. E.g. adding macvtap support: we already parsed macvtap properties ourselves because of missing libnl support. To *add* macvtap support, we also would have to do it ourself (or extend libnl).
2015-10-20 09:27:16 +02:00
system_support = nm_platform_check_support_kernel_extended_ifa_flags (NM_PLATFORM_GET);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
if (system_support)
ifa_flags = IFA_F_NOPREFIXROUTE;
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
if (global_opt.tempaddr == NM_SETTING_IP6_CONFIG_PRIVACY_PREFER_TEMP_ADDR
|| global_opt.tempaddr == NM_SETTING_IP6_CONFIG_PRIVACY_PREFER_PUBLIC_ADDR)
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
{
/* without system_support, this flag will be ignored. Still set it, doesn't seem to do any harm. */
ifa_flags |= IFA_F_MANAGETEMPADDR;
}
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
existing = nm_ip6_config_capture (gl.ifindex, FALSE, global_opt.tempaddr);
iface-helper: fix RA processing with more than one router We construct new IP6Config on each rdisc_config_changed(). That's not a smart thing to do, since that makes us throw away the previous configuration. In case the two routers on the same network, the first RA triggers rdisc_config_changed() for changed gateway and addresses. On handling the second RA rdisc_config_changed() doesn't add the address, resulting in the address being removed on ip6 config sync. A side effect of this is that the address is still tentative, resulting in DAD retry and an new address being added. So the networking still works, but at the expense of a single DAD failure and an address that's perhaps different from what was expected.
2016-03-03 15:35:14 +01:00
if (rdisc_config)
nm_ip6_config_subtract (existing, rdisc_config);
else
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
rdisc_config = nm_ip6_config_new (gl.ifindex);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
if (changed & NM_RDISC_CONFIG_GATEWAYS) {
/* Use the first gateway as ordered in router discovery cache. */
rdisc: hide internal fields from NMRDisc API Hide the mutable fields that were exposed to the user of the NMRDisc API. Instead, only expose a constant NMRDiscData structure.
2016-07-07 13:25:38 +02:00
if (rdata->gateways_n)
nm_ip6_config_set_gateway (rdisc_config, &rdata->gateways[0].address);
else
iface-helper: fix RA processing with more than one router We construct new IP6Config on each rdisc_config_changed(). That's not a smart thing to do, since that makes us throw away the previous configuration. In case the two routers on the same network, the first RA triggers rdisc_config_changed() for changed gateway and addresses. On handling the second RA rdisc_config_changed() doesn't add the address, resulting in the address being removed on ip6 config sync. A side effect of this is that the address is still tentative, resulting in DAD retry and an new address being added. So the networking still works, but at the expense of a single DAD failure and an address that's perhaps different from what was expected.
2016-03-03 15:35:14 +01:00
nm_ip6_config_set_gateway (rdisc_config, NULL);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
if (changed & NM_RDISC_CONFIG_ADDRESSES) {
/* Rebuild address list from router discovery cache. */
iface-helper: fix RA processing with more than one router We construct new IP6Config on each rdisc_config_changed(). That's not a smart thing to do, since that makes us throw away the previous configuration. In case the two routers on the same network, the first RA triggers rdisc_config_changed() for changed gateway and addresses. On handling the second RA rdisc_config_changed() doesn't add the address, resulting in the address being removed on ip6 config sync. A side effect of this is that the address is still tentative, resulting in DAD retry and an new address being added. So the networking still works, but at the expense of a single DAD failure and an address that's perhaps different from what was expected.
2016-03-03 15:35:14 +01:00
nm_ip6_config_reset_addresses (rdisc_config);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
/* rdisc->addresses contains at most max_addresses entries.
* This is different from what the kernel does, which
* also counts static and temporary addresses when checking
* max_addresses.
**/
rdisc: hide internal fields from NMRDisc API Hide the mutable fields that were exposed to the user of the NMRDisc API. Instead, only expose a constant NMRDiscData structure.
2016-07-07 13:25:38 +02:00
for (i = 0; i < rdata->addresses_n; i++) {
const NMRDiscAddress *discovered_address = &rdata->addresses[i];
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
NMPlatformIP6Address address;
memset (&address, 0, sizeof (address));
address.address = discovered_address->address;
address.plen = system_support ? 64 : 128;
address.timestamp = discovered_address->timestamp;
address.lifetime = discovered_address->lifetime;
address.preferred = discovered_address->preferred;
if (address.preferred > address.lifetime)
address.preferred = address.lifetime;
core/trivial: rename "source" field of addresses and routes The "source" field of NMPlatformIPRoute (now "rt_source") maps to the protocol field of the route. The source of NMPlatformIPAddress (now "addr_source") has no direct equivalent in the kernel. As their use is different, they should have different names. Also, the name "source" is used all over the place. Hence give the fields a more distinct name.
2016-04-11 13:09:52 +02:00
address.addr_source = NM_IP_CONFIG_SOURCE_RDISC;
platform/trivial: rename NMPlatformIP6Address's "flags" field to "n_ifa_flags" There are far too many "flags". Rename the "flags" to "n_ifa_flags" which reminds to "ifa_flags" in 'struct ifaddrmsg', but with a distinctive "n_" prefix.
2016-02-29 16:23:16 +01:00
address.n_ifa_flags = ifa_flags;
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
iface-helper: fix RA processing with more than one router We construct new IP6Config on each rdisc_config_changed(). That's not a smart thing to do, since that makes us throw away the previous configuration. In case the two routers on the same network, the first RA triggers rdisc_config_changed() for changed gateway and addresses. On handling the second RA rdisc_config_changed() doesn't add the address, resulting in the address being removed on ip6 config sync. A side effect of this is that the address is still tentative, resulting in DAD retry and an new address being added. So the networking still works, but at the expense of a single DAD failure and an address that's perhaps different from what was expected.
2016-03-03 15:35:14 +01:00
nm_ip6_config_add_address (rdisc_config, &address);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
}
if (changed & NM_RDISC_CONFIG_ROUTES) {
/* Rebuild route list from router discovery cache. */
iface-helper: fix RA processing with more than one router We construct new IP6Config on each rdisc_config_changed(). That's not a smart thing to do, since that makes us throw away the previous configuration. In case the two routers on the same network, the first RA triggers rdisc_config_changed() for changed gateway and addresses. On handling the second RA rdisc_config_changed() doesn't add the address, resulting in the address being removed on ip6 config sync. A side effect of this is that the address is still tentative, resulting in DAD retry and an new address being added. So the networking still works, but at the expense of a single DAD failure and an address that's perhaps different from what was expected.
2016-03-03 15:35:14 +01:00
nm_ip6_config_reset_routes (rdisc_config);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
rdisc: hide internal fields from NMRDisc API Hide the mutable fields that were exposed to the user of the NMRDisc API. Instead, only expose a constant NMRDiscData structure.
2016-07-07 13:25:38 +02:00
for (i = 0; i < rdata->routes_n; i++) {
const NMRDiscRoute *discovered_route = &rdata->routes[i];
rdisc: tighten up type and range of NMRDiscRoute.plen
2016-07-07 15:45:58 +02:00
const NMPlatformIP6Route route = {
.network = discovered_route->network,
.plen = discovered_route->plen,
.gateway = discovered_route->gateway,
.rt_source = NM_IP_CONFIG_SOURCE_RDISC,
.metric = global_opt.priority_v6,
};
nm_ip6_config_add_route (rdisc_config, &route);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
}
if (changed & NM_RDISC_CONFIG_DHCP_LEVEL) {
/* Unsupported until systemd DHCPv6 is ready */
}
platform: don't accept lowering IPv6 hop-limit from RA (CVE-2015-2924) https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=6fd99094de2b83d1d4c8457f2c83483b2828e75a http://seclists.org/oss-sec/2015/q2/46 https://bugzilla.redhat.com/show_bug.cgi?id=1209902 https://bugzilla.redhat.com/show_bug.cgi?id=1209903
2015-04-08 15:54:30 +02:00
if (changed & NM_RDISC_CONFIG_HOP_LIMIT)
rdisc: hide internal fields from NMRDisc API Hide the mutable fields that were exposed to the user of the NMRDisc API. Instead, only expose a constant NMRDiscData structure.
2016-07-07 13:25:38 +02:00
nm_platform_sysctl_set_ip6_hop_limit_safe (NM_PLATFORM_GET, global_opt.ifname, rdata->hop_limit);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
if (changed & NM_RDISC_CONFIG_MTU) {
char val[16];
rdisc: hide internal fields from NMRDisc API Hide the mutable fields that were exposed to the user of the NMRDisc API. Instead, only expose a constant NMRDiscData structure.
2016-07-07 13:25:38 +02:00
g_snprintf (val, sizeof (val), "%d", rdata->mtu);
platform: add self argument to platform functions Most nm_platform_*() functions operate on the platform singleton nm_platform_get(). That made sense because the NMPlatform instance was mainly to hook fake platform for testing. While the implicit argument saved some typing, I think explicit is better. Especially, because NMPlatform could become a more usable object then just a hook for testing. With this change, NMPlatform instances can be used individually, not only as a singleton instance. Before this change, the constructor of NMLinuxPlatform could not call any nm_platform_*() functions because the singleton was not yet initialized. We could only instantiate an incomplete instance, register it via nm_platform_setup(), and then complete initialization via singleton->setup(). With this change, we can create and fully initialize NMPlatform instances before/without setting them up them as singleton. Also, currently there is no clear distinction between functions that operate on the NMPlatform instance, and functions that can be used stand-alone (e.g. nm_platform_ip4_address_to_string()). The latter can not be mocked for testing. With this change, the distinction becomes obvious. That is also useful because it becomes clearer which functions make use of the platform cache and which not. Inside nm-linux-platform.c, continue the pattern that the self instance is named @platform. That makes sense because its type is NMPlatform, and not NMLinuxPlatform what we would expect from a paramter named @self. This is a major diff that causes some pain when rebasing. Try to rebase to the parent commit of this commit as a first step. Then rebase on top of this commit using merge-strategy "ours".
2015-04-18 12:36:09 +02:00
nm_platform_sysctl_set (NM_PLATFORM_GET, nm_utils_ip6_property_path (global_opt.ifname, "mtu"), val);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
iface-helper: fix RA processing with more than one router We construct new IP6Config on each rdisc_config_changed(). That's not a smart thing to do, since that makes us throw away the previous configuration. In case the two routers on the same network, the first RA triggers rdisc_config_changed() for changed gateway and addresses. On handling the second RA rdisc_config_changed() doesn't add the address, resulting in the address being removed on ip6 config sync. A side effect of this is that the address is still tentative, resulting in DAD retry and an new address being added. So the networking still works, but at the expense of a single DAD failure and an address that's perhaps different from what was expected.
2016-03-03 15:35:14 +01:00
nm_ip6_config_merge (existing, rdisc_config, NM_IP_CONFIG_MERGE_DEFAULT);
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
if (!nm_ip6_config_commit (existing, gl.ifindex, TRUE))
iface-helper: use logging macros
2016-10-05 12:04:46 +02:00
_LOGW (LOGD_IP6, "failed to apply IPv6 config");
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
static void
rdisc_ra_timeout (NMRDisc *rdisc, gpointer user_data)
{
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
if (global_opt.slaac_required) {
iface-helper: use logging macros
2016-10-05 12:04:46 +02:00
_LOGW (LOGD_IP6, "IPv6 timed out or failed, quitting...");
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
g_main_loop_quit (gl.main_loop);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
} else
iface-helper: use logging macros
2016-10-05 12:04:46 +02:00
_LOGW (LOGD_IP6, "IPv6 timed out or failed");
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
static gboolean
quit_handler (gpointer user_data)
{
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
g_main_loop_quit (gl.main_loop);
nm-iface-helper: small signal handling fixup nm-iface-helper originally used the same pthread_sigmask()-based signal handling as NetworkManager, but was then switched to using g_unix_signal_add(). But a little bit of unnecessary code remained.
2015-01-12 11:36:26 -05:00
return G_SOURCE_REMOVE;
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
static void
nm-iface-helper: small signal handling fixup nm-iface-helper originally used the same pthread_sigmask()-based signal handling as NetworkManager, but was then switched to using g_unix_signal_add(). But a little bit of unnecessary code remained.
2015-01-12 11:36:26 -05:00
setup_signals (void)
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
{
signal (SIGPIPE, SIG_IGN);
nm-iface-helper: small signal handling fixup nm-iface-helper originally used the same pthread_sigmask()-based signal handling as NetworkManager, but was then switched to using g_unix_signal_add(). But a little bit of unnecessary code remained.
2015-01-12 11:36:26 -05:00
g_unix_signal_add (SIGINT, quit_handler, NULL);
g_unix_signal_add (SIGTERM, quit_handler, NULL);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
iface-helper: return from main() instead of calling exit()
2016-10-05 15:07:46 +02:00
static gboolean
main: refactor early setup in main() Move call to nm_main_utils_early_setup() to a separate function. Also move the @options array away from the main function, saving a few bytes on the stack. Now only do_early_setup() modifies the @global_opt structure.
2015-03-13 20:09:46 +01:00
do_early_setup (int *argc, char **argv[])
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
{
main: refactor early setup in main() Move call to nm_main_utils_early_setup() to a separate function. Also move the @options array away from the main function, saving a few bytes on the stack. Now only do_early_setup() modifies the @global_opt structure.
2015-03-13 20:09:46 +01:00
gint64 priority64_v4 = -1;
gint64 priority64_v6 = -1;
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
GOptionEntry options[] = {
/* Interface/IP config */
core: prefer connection.stable-id to generate IPv6 stable privacy addresses The Network_ID for generating RFC 7217 stable privacy IPv6 addresses is by default the UUID of the connection. Alternatively, prefer "connection.stable-id" as Network_ID to generate the stable addresses. This allows to configure a set of connections that all use the same Network_ID for generating stable addresses. Note that the stable-id and the UUID do no overlap, that is two connections [connection] uuid=uuid1 stable-id= and [connection] uuid=uuid2 stable-id=uuid1 generate distinct addresses.
2016-06-21 18:07:56 +02:00
{ "ifname", 'i', 0, G_OPTION_ARG_STRING, &global_opt.ifname, N_("The interface to manage"), "eth0" },
{ "uuid", 'u', 0, G_OPTION_ARG_STRING, &global_opt.uuid, N_("Connection UUID"), "661e8cd0-b618-46b8-9dc9-31a52baaa16b" },
{ "stable-id", '\0', 0, G_OPTION_ARG_STRING, &global_opt.stable_id, N_("Connection Token for Stable IDs"), "eth" },
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
{ "slaac", 's', 0, G_OPTION_ARG_NONE, &global_opt.slaac, N_("Whether to manage IPv6 SLAAC"), NULL },
{ "slaac-required", '6', 0, G_OPTION_ARG_NONE, &global_opt.slaac_required, N_("Whether SLAAC must be successful"), NULL },
{ "slaac-tempaddr", 't', 0, G_OPTION_ARG_INT, &global_opt.tempaddr, N_("Use an IPv6 temporary privacy address"), NULL },
{ "dhcp4", 'd', 0, G_OPTION_ARG_STRING, &global_opt.dhcp4_address, N_("Current DHCPv4 address"), NULL },
{ "dhcp4-required", '4', 0, G_OPTION_ARG_NONE, &global_opt.dhcp4_required, N_("Whether DHCPv4 must be successful"), NULL },
{ "dhcp4-clientid", 'c', 0, G_OPTION_ARG_STRING, &global_opt.dhcp4_clientid, N_("Hex-encoded DHCPv4 client ID"), NULL },
{ "dhcp4-hostname", 'h', 0, G_OPTION_ARG_STRING, &global_opt.dhcp4_hostname, N_("Hostname to send to DHCP server"), N_("barbar") },
dhcp4: send FQDN option when ipv4.dhcp-fqdn is set Modify the 3 DHCP client backends to support the new property.
2015-10-13 15:13:26 +02:00
{ "dhcp4-fqdn", 'F', 0, G_OPTION_ARG_STRING, &global_opt.dhcp4_fqdn, N_("FQDN to send to DHCP server"), N_("host.domain.org") },
main: refactor early setup in main() Move call to nm_main_utils_early_setup() to a separate function. Also move the @options array away from the main function, saving a few bytes on the stack. Now only do_early_setup() modifies the @global_opt structure.
2015-03-13 20:09:46 +01:00
{ "priority4", '\0', 0, G_OPTION_ARG_INT64, &priority64_v4, N_("Route priority for IPv4"), N_("0") },
{ "priority6", '\0', 0, G_OPTION_ARG_INT64, &priority64_v6, N_("Route priority for IPv6"), N_("1024") },
fix typo and do not translate an empty string https://bugzilla.gnome.org/show_bug.cgi?id=748906
2015-05-04 19:10:29 +03:00
{ "iid", 'e', 0, G_OPTION_ARG_STRING, &global_opt.iid_str, N_("Hex-encoded Interface Identifier"), "" },
core: add support for RFC7217 stable privacy addressing RFC7217 introduces an alternative mechanism for creating addresses during stateless IPv6 address configuration. It's supposed to create addresses whose host part stays stable in a particular network but changes when the hosts enters another network to mitigate possibility of tracking the host movement. It can be used alongside RFC 4941 privacy extensions (temporary addresses) and replaces the use of RFC 4862 interface identifiers. The address creation mode is controlld by ip6.addr_gen_mode property (ADDR_GEN_MODE in ifcfg-rh), with values of "stable-privacy" and "eui-64", defaulting to "eui-64" if unspecified. The host part of an address is computed by hashing a system-specific secret salted with various stable values that identify the connection with a secure hash algorithm: RID = F(Prefix, Net_Iface, Network_ID, DAD_Counter, secret_key) For NetworkManager we use these parameters: * F() SHA256 hash function. * Prefix This is a network part of the /64 address * Net_Iface We use the interface name (e.g. "eth0"). This ensures the address won't change with the change of interface hardware. * Network_ID We use the connection UUID here. This ensures the salt is different for wireless networks with a different SSID as suggested by RFC7217. * DAD_Counter A per-address counter that increases with each DAD failure. * secret_key We store the secret key in /var/lib/NetworkManager/secret_key. If it's shorter than 128 bits then it's rejected. If the file is not present we initialize it by fetching 256 pseudo-random bits from /dev/urandom on first use. Duplicate address detection uses IDGEN_RETRIES = 3 and does not utilize the IDGEN_DELAY delay (despite it SHOULD). This is for ease of implementation and may change in future. Neither parameter is currently configurable.
2015-10-03 19:44:27 +02:00
{ "addr-gen-mode", 'e', 0, G_OPTION_ARG_INT, &global_opt.addr_gen_mode, N_("IPv6 SLAAC address generation mode"), "eui64" },
logging: make use of journal configurable
2015-07-08 19:34:34 +02:00
{ "logging-backend", '\0', 0, G_OPTION_ARG_STRING, &global_opt.logging_backend, N_("The logging backend configuration value. See logging.backend in NetworkManager.conf"), NULL },
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
/* Logging/debugging */
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
{ "version", 'V', 0, G_OPTION_ARG_NONE, &global_opt.show_version, N_("Print NetworkManager version and exit"), NULL },
{ "no-daemon", 'n', G_OPTION_FLAG_REVERSE, G_OPTION_ARG_NONE, &global_opt.become_daemon, N_("Don't become a daemon"), NULL },
{ "debug", 'b', 0, G_OPTION_ARG_NONE, &global_opt.debug, N_("Don't become a daemon, and log to stderr"), NULL },
{ "log-level", 0, 0, G_OPTION_ARG_STRING, &global_opt.opt_log_level, N_("Log level: one of [%s]"), "INFO" },
{ "log-domains", 0, 0, G_OPTION_ARG_STRING, &global_opt.opt_log_domains,
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
N_("Log domains separated by ',': any combination of [%s]"),
"PLATFORM,RFKILL,WIFI" },
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
{ "g-fatal-warnings", 0, 0, G_OPTION_ARG_NONE, &global_opt.g_fatal_warnings, N_("Make all warnings fatal"), NULL },
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
{NULL}
};
if (!nm_main_utils_early_setup ("nm-iface-helper",
main: refactor early setup in main() Move call to nm_main_utils_early_setup() to a separate function. Also move the @options array away from the main function, saving a few bytes on the stack. Now only do_early_setup() modifies the @global_opt structure.
2015-03-13 20:09:46 +01:00
argc,
argv,
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
options,
NULL,
config: add nm_config_setup() to initialize config singleton Make nm_config_new() usable without accessing static/singleton data. nm_config_setup() is now used to initialize the singleton. Still, you must not call nm_config_get() before calling nm_config_setup() or after freeing the provided singleton instance.
2014-07-09 15:17:01 +02:00
NULL,
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
_("nm-iface-helper is a small, standalone process that manages a single network interface.")))
iface-helper: return from main() instead of calling exit()
2016-10-05 15:07:46 +02:00
return FALSE;
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
main: refactor early setup in main() Move call to nm_main_utils_early_setup() to a separate function. Also move the @options array away from the main function, saving a few bytes on the stack. Now only do_early_setup() modifies the @global_opt structure.
2015-03-13 20:09:46 +01:00
if (priority64_v4 >= 0 && priority64_v4 <= G_MAXUINT32)
global_opt.priority_v4 = (guint32) priority64_v4;
if (priority64_v6 >= 0 && priority64_v6 <= G_MAXUINT32)
global_opt.priority_v6 = (guint32) priority64_v6;
iface-helper: return from main() instead of calling exit()
2016-10-05 15:07:46 +02:00
return TRUE;
main: refactor early setup in main() Move call to nm_main_utils_early_setup() to a separate function. Also move the @options array away from the main function, saving a few bytes on the stack. Now only do_early_setup() modifies the @global_opt structure.
2015-03-13 20:09:46 +01:00
}
core: support IPv6 duplicate address detection NMDevice detects the DAD failures by watching the removal of tentative addresses (happens for DAD of addresses with valid lifetime, typically discovered addresses) or changes to addresses with dadfailed flag (permanent addresses, typically link-local and manually configured addresses). It retries creation of link-local addresses itself and lets RDisc know about the rest so that it can decide if it's rdisc-managed address and retry with a new address. Currently NMDevice doesn't do anything useful about link-local address DAD failures -- it just fails the link-local address addition instead of just timing out, which happened before. RDisc just logs a warning and removes the address from the list. However, with RFC7217 stable privacy addresses the use of a different address and thus a recovery from DAD failures would be possible.
2015-10-03 19:50:30 +02:00
static void
ip6_address_changed (NMPlatform *platform,
core: don't use generated glib enum for platform types
2016-10-22 13:08:36 +02:00
int obj_type_i,
core: support IPv6 duplicate address detection NMDevice detects the DAD failures by watching the removal of tentative addresses (happens for DAD of addresses with valid lifetime, typically discovered addresses) or changes to addresses with dadfailed flag (permanent addresses, typically link-local and manually configured addresses). It retries creation of link-local addresses itself and lets RDisc know about the rest so that it can decide if it's rdisc-managed address and retry with a new address. Currently NMDevice doesn't do anything useful about link-local address DAD failures -- it just fails the link-local address addition instead of just timing out, which happened before. RDisc just logs a warning and removes the address from the list. However, with RFC7217 stable privacy addresses the use of a different address and thus a recovery from DAD failures would be possible.
2015-10-03 19:50:30 +02:00
int iface,
NMPlatformIP6Address *addr,
core: don't use generated glib enum for platform types
2016-10-22 13:08:36 +02:00
int change_type_i,
core: support IPv6 duplicate address detection NMDevice detects the DAD failures by watching the removal of tentative addresses (happens for DAD of addresses with valid lifetime, typically discovered addresses) or changes to addresses with dadfailed flag (permanent addresses, typically link-local and manually configured addresses). It retries creation of link-local addresses itself and lets RDisc know about the rest so that it can decide if it's rdisc-managed address and retry with a new address. Currently NMDevice doesn't do anything useful about link-local address DAD failures -- it just fails the link-local address addition instead of just timing out, which happened before. RDisc just logs a warning and removes the address from the list. However, with RFC7217 stable privacy addresses the use of a different address and thus a recovery from DAD failures would be possible.
2015-10-03 19:50:30 +02:00
NMRDisc *rdisc)
{
core: don't use generated glib enum for platform types
2016-10-22 13:08:36 +02:00
const NMPlatformSignalChangeType change_type = change_type_i;
platform/trivial: rename NMPlatformIP6Address's "flags" field to "n_ifa_flags" There are far too many "flags". Rename the "flags" to "n_ifa_flags" which reminds to "ifa_flags" in 'struct ifaddrmsg', but with a distinctive "n_" prefix.
2016-02-29 16:23:16 +01:00
if ( (change_type == NM_PLATFORM_SIGNAL_CHANGED && addr->n_ifa_flags & IFA_F_DADFAILED)
|| (change_type == NM_PLATFORM_SIGNAL_REMOVED && addr->n_ifa_flags & IFA_F_TENTATIVE))
core: support IPv6 duplicate address detection NMDevice detects the DAD failures by watching the removal of tentative addresses (happens for DAD of addresses with valid lifetime, typically discovered addresses) or changes to addresses with dadfailed flag (permanent addresses, typically link-local and manually configured addresses). It retries creation of link-local addresses itself and lets RDisc know about the rest so that it can decide if it's rdisc-managed address and retry with a new address. Currently NMDevice doesn't do anything useful about link-local address DAD failures -- it just fails the link-local address addition instead of just timing out, which happened before. RDisc just logs a warning and removes the address from the list. However, with RFC7217 stable privacy addresses the use of a different address and thus a recovery from DAD failures would be possible.
2015-10-03 19:50:30 +02:00
nm_rdisc_dad_failed (rdisc, &addr->address);
}
main: refactor early setup in main() Move call to nm_main_utils_early_setup() to a separate function. Also move the @options array away from the main function, saving a few bytes on the stack. Now only do_early_setup() modifies the @global_opt structure.
2015-03-13 20:09:46 +01:00
int
main (int argc, char *argv[])
{
char *bad_domains = NULL;
GError *error = NULL;
gboolean wrote_pidfile = FALSE;
gs_free char *pidfile = NULL;
gs_unref_object NMDhcpClient *dhcp4_client = NULL;
gs_unref_object NMRDisc *rdisc = NULL;
GByteArray *hwaddr = NULL;
size_t hwaddr_len = 0;
gconstpointer tmp;
gs_free NMUtilsIPv6IfaceId *iid = NULL;
systemd: integrate sd-event into glib main loop We should not try to reimplement sd-event based on glib, instead we should hook sd-event into the glib mainloop.
2016-03-09 12:27:56 +01:00
guint sd_id;
main: refactor early setup in main() Move call to nm_main_utils_early_setup() to a separate function. Also move the @options array away from the main function, saving a few bytes on the stack. Now only do_early_setup() modifies the @global_opt structure.
2015-03-13 20:09:46 +01:00
all: remove #if GLIB_CHECK_VERSION conditionals around g_type_init() g_type_init() is now provided by nm-glib-compat.h as nm_g_type_init().
2014-07-10 10:41:31 +02:00
nm_g_type_init ();
main: refactor early setup in main() Move call to nm_main_utils_early_setup() to a separate function. Also move the @options array away from the main function, saving a few bytes on the stack. Now only do_early_setup() modifies the @global_opt structure.
2015-03-13 20:09:46 +01:00
setpgid (getpid (), getpid ());
iface-helper: return from main() instead of calling exit()
2016-10-05 15:07:46 +02:00
if (!do_early_setup (&argc, &argv))
return 1;
main: refactor early setup in main() Move call to nm_main_utils_early_setup() to a separate function. Also move the @options array away from the main function, saving a few bytes on the stack. Now only do_early_setup() modifies the @global_opt structure.
2015-03-13 20:09:46 +01:00
iface-helper: use different syslog-identfier for nm-iface-helper
2016-10-05 17:10:42 +02:00
nm_logging_set_syslog_identifier ("nm-iface-helper");
iface-helper: set logging prefix
2016-10-05 15:34:06 +02:00
nm_logging_set_prefix ("%s[%ld] (%s): ",
_NMLOG_PREFIX_NAME,
(long) getpid (),
global_opt.ifname ?: "???");
main: (order) set g_log_set_always_fatal() early on After parsing the cmd line options, we already can setup fatal glog level.
2015-03-13 23:24:05 +01:00
if (global_opt.g_fatal_warnings) {
GLogLevelFlags fatal_mask;
fatal_mask = g_log_set_always_fatal (G_LOG_FATAL_MASK);
fatal_mask |= G_LOG_LEVEL_WARNING | G_LOG_LEVEL_CRITICAL;
g_log_set_always_fatal (fatal_mask);
}
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
if (global_opt.show_version) {
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
fprintf (stdout, NM_DIST_VERSION "\n");
iface-helper: return from main() instead of calling exit()
2016-10-05 15:07:46 +02:00
return 0;
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
main: (order) move root user check after help/version option With this change, `NetworkManager --help` and `NetworkManager --version` work for non-root user.
2015-03-13 20:57:18 +01:00
nm_main_utils_ensure_root ();
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
if (!global_opt.ifname || !global_opt.uuid) {
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
fprintf (stderr, _("An interface name and UUID are required\n"));
iface-helper: return from main() instead of calling exit()
2016-10-05 15:07:46 +02:00
return 1;
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
gl.ifindex = if_nametoindex (global_opt.ifname);
if (gl.ifindex <= 0) {
main: (order) check pidfile earlier for running NM We should check for conflicting process (pidfile) early on and error out.
2015-03-14 17:58:23 +01:00
fprintf (stderr, _("Failed to find interface index for %s (%s)\n"), global_opt.ifname, strerror (errno));
iface-helper: return from main() instead of calling exit()
2016-10-05 15:07:46 +02:00
return 1;
main: (order) check pidfile earlier for running NM We should check for conflicting process (pidfile) early on and error out.
2015-03-14 17:58:23 +01:00
}
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
pidfile = g_strdup_printf (NMIH_PID_FILE_FMT, gl.ifindex);
main: (order) check pidfile earlier for running NM We should check for conflicting process (pidfile) early on and error out.
2015-03-14 17:58:23 +01:00
nm_main_utils_ensure_not_running_pidfile (pidfile);
main: (order) earlier create rundir Create the rundir earlier and before setting up nm-logging. nm_main_utils_ensure_rundir() errors out with fprintf(stderr) and does not need nm-logging.
2015-03-15 15:59:02 +01:00
nm_main_utils_ensure_rundir ();
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
if (!nm_logging_setup (global_opt.opt_log_level,
global_opt.opt_log_domains,
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
&bad_domains,
&error)) {
fprintf (stderr,
_("%s. Please use --help to see a list of valid options.\n"),
error->message);
iface-helper: return from main() instead of calling exit()
2016-10-05 15:07:46 +02:00
return 1;
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
} else if (bad_domains) {
fprintf (stderr,
_("Ignoring unrecognized log domain(s) '%s' passed on command line.\n"),
bad_domains);
g_clear_pointer (&bad_domains, g_free);
}
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
if (global_opt.become_daemon && !global_opt.debug) {
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
if (daemon (0, 0) < 0) {
int saved_errno;
saved_errno = errno;
fprintf (stderr, _("Could not daemonize: %s [error %u]\n"),
g_strerror (saved_errno),
saved_errno);
iface-helper: return from main() instead of calling exit()
2016-10-05 15:07:46 +02:00
return 1;
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
if (nm_main_utils_write_pidfile (pidfile))
wrote_pidfile = TRUE;
}
/* Set up unix signal handling - before creating threads, but after daemonizing! */
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
gl.main_loop = g_main_loop_new (NULL, FALSE);
nm-iface-helper: small signal handling fixup nm-iface-helper originally used the same pthread_sigmask()-based signal handling as NetworkManager, but was then switched to using g_unix_signal_add(). But a little bit of unnecessary code remained.
2015-01-12 11:36:26 -05:00
setup_signals ();
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
logging: make use of journal configurable
2015-07-08 19:34:34 +02:00
nm_logging_syslog_openlog (global_opt.logging_backend
? global_opt.logging_backend
: (global_opt.debug ? "debug" : NULL));
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
iface-helper: use logging macros
2016-10-05 12:04:46 +02:00
_LOGI (LOGD_CORE, "nm-iface-helper (version " NM_DIST_VERSION ") is starting...");
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
/* Set up platform interaction layer */
nm_linux_platform_setup ();
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
tmp = nm_platform_link_get_address (NM_PLATFORM_GET, gl.ifindex, &hwaddr_len);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
if (tmp) {
hwaddr = g_byte_array_sized_new (hwaddr_len);
g_byte_array_append (hwaddr, tmp, hwaddr_len);
}
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
if (global_opt.iid_str) {
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
GBytes *bytes;
gsize ignored = 0;
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
bytes = nm_utils_hexstr2bin (global_opt.iid_str);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
if (!bytes || g_bytes_get_size (bytes) != sizeof (*iid)) {
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
fprintf (stderr, _("(%s): Invalid IID %s\n"), global_opt.ifname, global_opt.iid_str);
iface-helper: return from main() instead of calling exit()
2016-10-05 15:07:46 +02:00
return 1;
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
iid = g_bytes_unref_to_data (bytes, &ignored);
}
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
if (global_opt.dhcp4_address) {
platform: add self argument to platform functions Most nm_platform_*() functions operate on the platform singleton nm_platform_get(). That made sense because the NMPlatform instance was mainly to hook fake platform for testing. While the implicit argument saved some typing, I think explicit is better. Especially, because NMPlatform could become a more usable object then just a hook for testing. With this change, NMPlatform instances can be used individually, not only as a singleton instance. Before this change, the constructor of NMLinuxPlatform could not call any nm_platform_*() functions because the singleton was not yet initialized. We could only instantiate an incomplete instance, register it via nm_platform_setup(), and then complete initialization via singleton->setup(). With this change, we can create and fully initialize NMPlatform instances before/without setting them up them as singleton. Also, currently there is no clear distinction between functions that operate on the NMPlatform instance, and functions that can be used stand-alone (e.g. nm_platform_ip4_address_to_string()). The latter can not be mocked for testing. With this change, the distinction becomes obvious. That is also useful because it becomes clearer which functions make use of the platform cache and which not. Inside nm-linux-platform.c, continue the pattern that the self instance is named @platform. That makes sense because its type is NMPlatform, and not NMLinuxPlatform what we would expect from a paramter named @self. This is a major diff that causes some pain when rebasing. Try to rebase to the parent commit of this commit as a first step. Then rebase on top of this commit using merge-strategy "ours".
2015-04-18 12:36:09 +02:00
nm_platform_sysctl_set (NM_PLATFORM_GET, nm_utils_ip4_property_path (global_opt.ifname, "promote_secondaries"), "1");
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
core: declare nm_dhcp_manager_get() using NM_DEFINE_SINGLETON_GETTER()
2015-01-05 19:30:00 +01:00
dhcp4_client = nm_dhcp_manager_start_ip4 (nm_dhcp_manager_get (),
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
global_opt.ifname,
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
gl.ifindex,
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
hwaddr,
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
global_opt.uuid,
main: refactor early setup in main() Move call to nm_main_utils_early_setup() to a separate function. Also move the @options array away from the main function, saving a few bytes on the stack. Now only do_early_setup() modifies the @global_opt structure.
2015-03-13 20:09:46 +01:00
global_opt.priority_v4,
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
!!global_opt.dhcp4_hostname,
global_opt.dhcp4_hostname,
dhcp4: send FQDN option when ipv4.dhcp-fqdn is set Modify the 3 DHCP client backends to support the new property.
2015-10-13 15:13:26 +02:00
global_opt.dhcp4_fqdn,
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
global_opt.dhcp4_clientid,
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
45,
NULL,
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
global_opt.dhcp4_address);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
g_assert (dhcp4_client);
g_signal_connect (dhcp4_client,
NM_DHCP_CLIENT_SIGNAL_STATE_CHANGED,
G_CALLBACK (dhcp4_state_changed),
NULL);
}
main: move option variables to static variable Move the variables to a static struct so that we can factor out some of the initialization code. Also it's nice to have all options placed together in one struct so that is is obvious which static variables are part of the command line options, and which have other use.
2015-03-13 19:59:32 +01:00
if (global_opt.slaac) {
core: prefer connection.stable-id to generate IPv6 stable privacy addresses The Network_ID for generating RFC 7217 stable privacy IPv6 addresses is by default the UUID of the connection. Alternatively, prefer "connection.stable-id" as Network_ID to generate the stable addresses. This allows to configure a set of connections that all use the same Network_ID for generating stable addresses. Note that the stable-id and the UUID do no overlap, that is two connections [connection] uuid=uuid1 stable-id= and [connection] uuid=uuid2 stable-id=uuid1 generate distinct addresses.
2016-06-21 18:07:56 +02:00
NMUtilsStableType stable_type = NM_UTILS_STABLE_TYPE_UUID;
const char *stable_id = global_opt.uuid;
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
nm_platform_link_set_user_ipv6ll_enabled (NM_PLATFORM_GET, gl.ifindex, TRUE);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
core: prefer connection.stable-id to generate IPv6 stable privacy addresses The Network_ID for generating RFC 7217 stable privacy IPv6 addresses is by default the UUID of the connection. Alternatively, prefer "connection.stable-id" as Network_ID to generate the stable addresses. This allows to configure a set of connections that all use the same Network_ID for generating stable addresses. Note that the stable-id and the UUID do no overlap, that is two connections [connection] uuid=uuid1 stable-id= and [connection] uuid=uuid2 stable-id=uuid1 generate distinct addresses.
2016-06-21 18:07:56 +02:00
if ( global_opt.stable_id
&& (global_opt.stable_id[0] >= '0' && global_opt.stable_id[0] <= '9')
&& global_opt.stable_id[1] == ' ') {
/* strict parsing of --stable-id, which is the numeric stable-type
* and the ID, joined with one space. For now, only support stable-types
* from 0 to 9. */
stable_type = (global_opt.stable_id[0] - '0');
stable_id = &global_opt.stable_id[2];
}
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
rdisc = nm_lndp_rdisc_new (NM_PLATFORM_GET, gl.ifindex, global_opt.ifname,
core: prefer connection.stable-id to generate IPv6 stable privacy addresses The Network_ID for generating RFC 7217 stable privacy IPv6 addresses is by default the UUID of the connection. Alternatively, prefer "connection.stable-id" as Network_ID to generate the stable addresses. This allows to configure a set of connections that all use the same Network_ID for generating stable addresses. Note that the stable-id and the UUID do no overlap, that is two connections [connection] uuid=uuid1 stable-id= and [connection] uuid=uuid2 stable-id=uuid1 generate distinct addresses.
2016-06-21 18:07:56 +02:00
stable_type, stable_id,
global_opt.addr_gen_mode, NULL);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
g_assert (rdisc);
if (iid)
nm_rdisc_set_iid (rdisc, *iid);
platform: add self argument to platform functions Most nm_platform_*() functions operate on the platform singleton nm_platform_get(). That made sense because the NMPlatform instance was mainly to hook fake platform for testing. While the implicit argument saved some typing, I think explicit is better. Especially, because NMPlatform could become a more usable object then just a hook for testing. With this change, NMPlatform instances can be used individually, not only as a singleton instance. Before this change, the constructor of NMLinuxPlatform could not call any nm_platform_*() functions because the singleton was not yet initialized. We could only instantiate an incomplete instance, register it via nm_platform_setup(), and then complete initialization via singleton->setup(). With this change, we can create and fully initialize NMPlatform instances before/without setting them up them as singleton. Also, currently there is no clear distinction between functions that operate on the NMPlatform instance, and functions that can be used stand-alone (e.g. nm_platform_ip4_address_to_string()). The latter can not be mocked for testing. With this change, the distinction becomes obvious. That is also useful because it becomes clearer which functions make use of the platform cache and which not. Inside nm-linux-platform.c, continue the pattern that the self instance is named @platform. That makes sense because its type is NMPlatform, and not NMLinuxPlatform what we would expect from a paramter named @self. This is a major diff that causes some pain when rebasing. Try to rebase to the parent commit of this commit as a first step. Then rebase on top of this commit using merge-strategy "ours".
2015-04-18 12:36:09 +02:00
nm_platform_sysctl_set (NM_PLATFORM_GET, nm_utils_ip6_property_path (global_opt.ifname, "accept_ra"), "1");
nm_platform_sysctl_set (NM_PLATFORM_GET, nm_utils_ip6_property_path (global_opt.ifname, "accept_ra_defrtr"), "0");
nm_platform_sysctl_set (NM_PLATFORM_GET, nm_utils_ip6_property_path (global_opt.ifname, "accept_ra_pinfo"), "0");
nm_platform_sysctl_set (NM_PLATFORM_GET, nm_utils_ip6_property_path (global_opt.ifname, "accept_ra_rtr_pref"), "0");
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
core: support IPv6 duplicate address detection NMDevice detects the DAD failures by watching the removal of tentative addresses (happens for DAD of addresses with valid lifetime, typically discovered addresses) or changes to addresses with dadfailed flag (permanent addresses, typically link-local and manually configured addresses). It retries creation of link-local addresses itself and lets RDisc know about the rest so that it can decide if it's rdisc-managed address and retry with a new address. Currently NMDevice doesn't do anything useful about link-local address DAD failures -- it just fails the link-local address addition instead of just timing out, which happened before. RDisc just logs a warning and removes the address from the list. However, with RFC7217 stable privacy addresses the use of a different address and thus a recovery from DAD failures would be possible.
2015-10-03 19:50:30 +02:00
g_signal_connect (NM_PLATFORM_GET,
NM_PLATFORM_SIGNAL_IP6_ADDRESS_CHANGED,
G_CALLBACK (ip6_address_changed),
rdisc);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
g_signal_connect (rdisc,
NM_RDISC_CONFIG_CHANGED,
G_CALLBACK (rdisc_config_changed),
NULL);
g_signal_connect (rdisc,
NM_RDISC_RA_TIMEOUT,
G_CALLBACK (rdisc_ra_timeout),
NULL);
nm_rdisc_start (rdisc);
}
systemd: integrate sd-event into glib main loop We should not try to reimplement sd-event based on glib, instead we should hook sd-event into the glib mainloop.
2016-03-09 12:27:56 +01:00
sd_id = nm_sd_event_attach_default ();
iface-helper: namespace global variables
2016-10-05 12:04:24 +02:00
g_main_loop_run (gl.main_loop);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
g_clear_pointer (&hwaddr, g_byte_array_unref);
if (pidfile && wrote_pidfile)
unlink (pidfile);
iface-helper: use logging macros
2016-10-05 12:04:46 +02:00
_LOGI (LOGD_CORE, "exiting");
systemd: integrate sd-event into glib main loop We should not try to reimplement sd-event based on glib, instead we should hook sd-event into the glib mainloop.
2016-03-09 12:27:56 +01:00
nm_clear_g_source (&sd_id);
iface-helper: free main_loop instance at end of main()
2016-10-05 15:10:34 +02:00
g_clear_pointer (&gl.main_loop, g_main_loop_unref);
iface-helper: return from main() instead of calling exit()
2016-10-05 15:07:46 +02:00
return 0;
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
}
all: modify line separator comments to be 80 chars wide sed 's#^/\*\{5\}\*\+/$#/*****************************************************************************/#' $(git grep -l '\*\{5\}' | grep '\.[hc]$') -i
2016-10-02 18:22:50 +02:00
/*****************************************************************************/
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
/* Stub functions */
config: add handler for SIGHUP and a reload-configuration stub
2014-07-09 18:36:20 +02:00
void
config: pass signals to nm_config_reload() Also react on SIGUSR1 and SIGUSR2, beside SIGHUP. Only for SIGHUP actually reload the configuration from disc. For the other signals only emit a config-changed signal.
2015-06-25 21:10:32 +02:00
nm_main_config_reload (int signal)
config: add handler for SIGHUP and a reload-configuration stub
2014-07-09 18:36:20 +02:00
{
iface-helper: use logging macros
2016-10-05 12:04:46 +02:00
_LOGI (LOGD_CORE, "reloading configuration not supported");
config: add handler for SIGHUP and a reload-configuration stub
2014-07-09 18:36:20 +02:00
}
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
gconstpointer nm_config_get (void);
const char *nm_config_get_dhcp_client (gpointer unused);
gboolean nm_config_get_configure_and_quit (gpointer unused);
core: rename NMDBusManager to NMBusManager Our gdbus generated types use the same names as their corresponding "real" types, but with "NM" changed to "NMDBus". Unfortunately, that means that introspection/nmdbus-manager.c (the generated type for src/nm-manager.c) uses the same type name as the entirely unrelated src/nm-dbus-manager.c. Fix this by removing the "d" from src/nm-dbus-manager.c. (We could rename the generated type instead, but then it becomes inconsistent with all the other generated types, and we're already using it as "NMDBusManager" in libnm/nm-manager.c.)
2015-04-16 14:20:51 -04:00
gconstpointer nm_bus_manager_get (void);
exported-object: add support for DBus ObjectManager interface NMExportedObject now derives from GDBusObjectSkeleton, which is what GDBusObjectManagerServer wants. The main GDBusConnection and each private server connection now gets a new GDBusObjectManagerServer, and exported objects are registered with that instead of individually exporting each GDBusInterfaceSkeleton. Previously exported objects were not referenced by the BusManager, but instead removed from the exports hash via weak references. The GDBusObjectManagerServer instead references exported objects, which can make them live much longer than they did before. Co-Authored-By: Thomas Haller <thaller@redhat.com>
2015-07-20 17:30:02 -05:00
void nm_bus_manager_register_object (gpointer unused, gpointer object);
core: rename NMDBusManager to NMBusManager Our gdbus generated types use the same names as their corresponding "real" types, but with "NM" changed to "NMDBus". Unfortunately, that means that introspection/nmdbus-manager.c (the generated type for src/nm-manager.c) uses the same type name as the entirely unrelated src/nm-dbus-manager.c. Fix this by removing the "d" from src/nm-dbus-manager.c. (We could rename the generated type instead, but then it becomes inconsistent with all the other generated types, and we're already using it as "NMDBusManager" in libnm/nm-manager.c.)
2015-04-16 14:20:51 -04:00
void nm_bus_manager_unregister_object (gpointer unused, gpointer object);
dbus: fix emitting D-Bus NetworkManager's old-style PropertiesChange signal Before switching to gdbus (before 1.2.0), NetworkManager used dbus-glib. Most objects in the D-Bus API with properties had a signal NetworkManager-specific "PropertiesChanged" signal. Nowadays, this way of handling of property changes is deprecated for the common "PropertiesChanged" signal on the "org.freedesktop.DBus.Properties" interface. There were a few pecularities in 1.0.0 and earlier: (1) Due to the implementation with dbus-glib, a property-changed signal was emitted on *all* interfaces. For example: - a change on a NMDeviceVeth of "NMDeviceEthernet.HwAddress" would be emitted both for the interfaces "fdo.NM.Device.Ethernet" and "fdo.NM.Device.Veth". Note that NMDeviceVeth is derived from NMDeviceEthernet and there is no "HwAddress" on veth device. - a change of "NMVpnConnection.VpnState" was emitted on both interfaces "fdo.NM.VPN.Connection" and "fdo.NM.Connecion.Active". Note that NMActiveConnection is the parent type of NMVpnConnection and only the latter has a property "VpnState". (2) NMDevice's "fdo.NM.Device" interface doesn't have a "PropertiesChanged" signal. From (1) follows that all property-changes for this type were instead invoked with an interface like "fdo.NM.Device.Ethernet" (or multiple interfaces in case of NMDeviceVeth). 1.2.0 introduced gdbus, which gives us the standard "fdo.DBus.Properties" signal. However, it made the mistake of not realizing (1), thus instead of emitting the signal once for each interface, it would pick the first one in the inheritance tree. With 1.4.0, a bug from merge commit 844345e caused signals for devices to be only emitted for the interface "fdo.NM.Device.Statistics", instead of "fdo.NM.Device.Ethernet" or "fdo.NM.Device.Veth" (or both). The latter is what bgo#770629 is about and what commit 82e9439 tried to fix. However, the fix was wrong because it tried to do the theoretically correct thing of emitting the property-changed signal exactly once for the interface that actually ontains the property. In addition, it missed that NMDevice doesn't have a PropertiesChanged signal, which caused signals for "fdo.NM.Device" to get lost *sigh*. Now, restore the (broken) behavior of 1.0.0. These old-style property changed signals are anyway considered deprecated and exist solely to satisfy old clients and preserve the old API. Fixes: 63fbfad3705db5901e6a2a6a2fc332da0f0ae4be https://bugzilla.gnome.org/show_bug.cgi?id=770629 https://bugzilla.redhat.com/show_bug.cgi?id=1371920
2016-09-01 13:00:21 +02:00
GType nm_device_get_type (void);
GType nm_active_connection_get_type (void);
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
gconstpointer
nm_config_get (void)
{
return GUINT_TO_POINTER (1);
}
const char *
nm_config_get_dhcp_client (gpointer unused)
{
return "internal";
}
gboolean
nm_config_get_configure_and_quit (gpointer unused)
{
return TRUE;
}
gconstpointer
core: rename NMDBusManager to NMBusManager Our gdbus generated types use the same names as their corresponding "real" types, but with "NM" changed to "NMDBus". Unfortunately, that means that introspection/nmdbus-manager.c (the generated type for src/nm-manager.c) uses the same type name as the entirely unrelated src/nm-dbus-manager.c. Fix this by removing the "d" from src/nm-dbus-manager.c. (We could rename the generated type instead, but then it becomes inconsistent with all the other generated types, and we're already using it as "NMDBusManager" in libnm/nm-manager.c.)
2015-04-16 14:20:51 -04:00
nm_bus_manager_get (void)
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
{
return GUINT_TO_POINTER (1);
}
void
exported-object: add support for DBus ObjectManager interface NMExportedObject now derives from GDBusObjectSkeleton, which is what GDBusObjectManagerServer wants. The main GDBusConnection and each private server connection now gets a new GDBusObjectManagerServer, and exported objects are registered with that instead of individually exporting each GDBusInterfaceSkeleton. Previously exported objects were not referenced by the BusManager, but instead removed from the exports hash via weak references. The GDBusObjectManagerServer instead references exported objects, which can make them live much longer than they did before. Co-Authored-By: Thomas Haller <thaller@redhat.com>
2015-07-20 17:30:02 -05:00
nm_bus_manager_register_object (gpointer unused, gpointer object)
iface-helper: add nm-iface-helper for dynamic configure-then-quit support When quitting, the Manager asks each device to spawn the interface helper, which persists and manages dynamic address on the interface after NetworkManager is gone. If the dynamic address cannot be maintaned, the helper quits and the interface's address may be removed when their lifetime runs out. To keep the helper as simple as possible, NetworkManager passes most of the configuration on the command-line, including some properties of the device's current state, which are necessary for the helper to maintain DHCP leases or IPv6 SLAAC addresses.
2014-10-29 09:12:18 -05:00
{
}
void
core: rename NMDBusManager to NMBusManager Our gdbus generated types use the same names as their corresponding "real" types, but with "NM" changed to "NMDBus". Unfortunately, that means that introspection/nmdbus-manager.c (the generated type for src/nm-manager.c) uses the same type name as the entirely unrelated src/nm-dbus-manager.c. Fix this by removing the "d" from src/nm-dbus-manager.c. (We could rename the generated type instead, but then it becomes inconsistent with all the other generated types, and we're already using it as "NMDBusManager" in libnm/nm-manager.c.)
2015-04-16 14:20:51 -04:00
nm_bus_manager_unregister_object (gpointer unused, gpointer object)
core: move D-Bus export/unexport into NMExportedObject Move D-Bus export/unexport handling into NMExportedObject and remove type-specific export/get_path methods (export paths are now specified at the class level, and NMExportedObject handles the counters for all exported types automatically). Since all exportable objects now use the same get_path() method, we can also add some helper methods to simplify get_property() implementations for object-path and object-path-array properties.
2015-04-03 10:08:52 -04:00
{
}
dbus: fix emitting D-Bus NetworkManager's old-style PropertiesChange signal Before switching to gdbus (before 1.2.0), NetworkManager used dbus-glib. Most objects in the D-Bus API with properties had a signal NetworkManager-specific "PropertiesChanged" signal. Nowadays, this way of handling of property changes is deprecated for the common "PropertiesChanged" signal on the "org.freedesktop.DBus.Properties" interface. There were a few pecularities in 1.0.0 and earlier: (1) Due to the implementation with dbus-glib, a property-changed signal was emitted on *all* interfaces. For example: - a change on a NMDeviceVeth of "NMDeviceEthernet.HwAddress" would be emitted both for the interfaces "fdo.NM.Device.Ethernet" and "fdo.NM.Device.Veth". Note that NMDeviceVeth is derived from NMDeviceEthernet and there is no "HwAddress" on veth device. - a change of "NMVpnConnection.VpnState" was emitted on both interfaces "fdo.NM.VPN.Connection" and "fdo.NM.Connecion.Active". Note that NMActiveConnection is the parent type of NMVpnConnection and only the latter has a property "VpnState". (2) NMDevice's "fdo.NM.Device" interface doesn't have a "PropertiesChanged" signal. From (1) follows that all property-changes for this type were instead invoked with an interface like "fdo.NM.Device.Ethernet" (or multiple interfaces in case of NMDeviceVeth). 1.2.0 introduced gdbus, which gives us the standard "fdo.DBus.Properties" signal. However, it made the mistake of not realizing (1), thus instead of emitting the signal once for each interface, it would pick the first one in the inheritance tree. With 1.4.0, a bug from merge commit 844345e caused signals for devices to be only emitted for the interface "fdo.NM.Device.Statistics", instead of "fdo.NM.Device.Ethernet" or "fdo.NM.Device.Veth" (or both). The latter is what bgo#770629 is about and what commit 82e9439 tried to fix. However, the fix was wrong because it tried to do the theoretically correct thing of emitting the property-changed signal exactly once for the interface that actually ontains the property. In addition, it missed that NMDevice doesn't have a PropertiesChanged signal, which caused signals for "fdo.NM.Device" to get lost *sigh*. Now, restore the (broken) behavior of 1.0.0. These old-style property changed signals are anyway considered deprecated and exist solely to satisfy old clients and preserve the old API. Fixes: 63fbfad3705db5901e6a2a6a2fc332da0f0ae4be https://bugzilla.gnome.org/show_bug.cgi?id=770629 https://bugzilla.redhat.com/show_bug.cgi?id=1371920
2016-09-01 13:00:21 +02:00
GType
nm_device_get_type (void)
{
g_return_val_if_reached (0);
}
GType
nm_active_connection_get_type (void)
{
g_return_val_if_reached (0);
}
Reference in a new issue Copy permalink