NetworkManager/src/nm-device-802-3-ethernet.c

653 lines
18 KiB
C
Raw Normal View History

/* -*- Mode: C; tab-width: 5; indent-tabs-mode: t; c-basic-offset: 5 -*- */
/* NetworkManager -- Network link manager
*
* Dan Williams <dcbw@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* (C) Copyright 2005 Red Hat, Inc.
*/
#include <glib.h>
#include <glib/gi18n.h>
#include <netinet/in.h>
#include <string.h>
#include <net/ethernet.h>
#include <stdlib.h>
#include "nm-device-802-3-ethernet.h"
#include "nm-device-interface.h"
#include "nm-device-private.h"
#include "nm-activation-request.h"
#include "NetworkManagerUtils.h"
2006-11-25 Dan Williams <dcbw@redhat.com> * src/supplicant-manager/nm-supplicant-types.h - new file; move all supplicant manager object typedefs here for #include sanity * src/supplicant-manager/nm-supplicant-interface.c src/supplicant-manager/nm-supplicant-interface.h - new file; an object that interfaces an NMDevice object to the supplicant and handles signals from the supplicant. This object does all necessary DBus communication with wpa_supplicant. * src/supplicant-manager/nm-supplicant-manager.c src/supplicant-manager/nm-supplicant-manager.h - Actually do something. Track the state of the wpa_supplicant service and deal with its comings & goings. Handle life events of supplicant interfaces too. - Move NMSupplicantManager typedef to nm-supplicant-types.h * src/supplicant-manager/nm-supplicant-connection.h - Move NMSupplicantConnection typedef to nm-supplicant-types.h * src/supplicant-manager/Makefile.am - Add new files to build, and add libnm-util to includes * src/nm-marshal.list - New marshaler type: VOID:UINT,UINT * src/nm-device-802-3-ethernet.c - (real_init): grab a supplicant interface - (nm_device_802_3_ethernet_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/nm-device-802-11-wireless.c - (real_init): grab a supplicant interface - (nm_device_802_11_wireless_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/NetworkManager.c - (main): create and keep the supplicant manager around for the lifetime of NetworkManager * src/Makefile.am - Link to the supplicant manager sub-library and use the supplicant manager includes git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2125 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-11-25 15:41:04 +00:00
#include "nm-supplicant-manager.h"
2007-11-28 Tambet Ingo <tambet@gmail.com> Merge the beginnings of the new GSM card support. * src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove * the ppp watch source before killing pppd - If this happens from g_object_unref() then the ppp manager is already destroyed by the time the watch callback runs. * src/nm-hal-manager.c: Add a device_type_name string to the * device creators, so that we can print a nice human readable string when a device is added. * src/nm-umts-device.c (automatic_registration_get_network): * Query for the activated network, not much is done with the result thought. * src/nm-serial-device.c (nm_serial_device_get_reply): * Implement. (ppp_ip4_config): Change the device state to activated here for now. (real_check_connection): Make sure the connection includes ppp setting. * libnm-glib/nm-client.c (get_device): Handle umts devices. * libnm-glib/Makefile.am: Add the new files to build. * libnm-glib/nm-umts-device.c: * libnm-glib/nm-umts-device.h: Implement. 2007-11-26 Tambet Ingo <tambet@gmail.com> * src/nm-umts-device.c (automatic_registration_get_network): For * now, dial immediately, nm_serial_device_get_reply() isn't implemented correctly yet. * src/nm-serial-device.c (wait_for_reply_info_destroy): Don't * try to remove the timeout source - this function is only called when the timeout source has been removed. (nm_serial_device_wait_for_reply): Allocate the duplicate responses array to be big enough to contain the terminating zero element as well. The timeout argument is meant to be in seconds now. (real_deactivate_quickly): Implement. * src/NetworkManager.conf: Allow root to own "org.freedesktop.NetworkManager.PPP", deny it for everybody else. * libnm-util/nm-setting-umts.c: Network type and band properties * are ints, (not unsigned ints). * libnm-util/nm-setting-serial.c (nm_setting_serial_class_init): * Fix a small issue with parity bounds - capital letters have lower ascii codes than lower case letters. * libnm-util/nm-connection.c (register_default_settings): * Register serial and umts settings. 2007-11-22 Tambet Ingo <tambet@gmail.com> Remove the "index" property from devices as not all device types have this. * include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove. * src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove. (wired_device_creator): Get the device interface from hal to create the device. (wireless_device_creator): Ditto. * src/nm-device.c (nm_device_init): Remove the index member. (constructor): Remove the checks for index property, make interface property a require constructor property. Use the HAL udi for DBus path for devices. (nm_device_get_index): Remove. (set_property): Remove index handling. (get_property): Ditto. (nm_device_get_dbus_path): Remove. * src/nm-device-interface.c (nm_device_interface_init): Remove * the index property. * src/nm-device-802-3-ethernet.c * (nm_device_802_3_ethernet_link_activated): Access the device index through it's interface. (nm_device_802_3_ethernet_link_deactivated): Ditto. (nm_device_802_3_ethernet_new): Remove the useless argument test_dev. Remove index argument. Add interface argument. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the useless test_dev argument. Remove index argument. Add interface arugment. * src/NetworkManagerSystem.c * (nm_system_device_set_from_ip4_config): Get the device index through interface. (nm_system_set_mtu): Ditto. * introspection/nm-device.xml: Remove the "Index" property. 2007-11-21 Tambet Ingo <tambet@gmail.com> * src/nm-serial-device.c: * src/nm-serial-device.c: * src/nm-umts-device.c: * src/nm-umts-device.h: Implement. * src/nm-hal-manager.c (nm_get_device_driver_name): * libhal_free_string the string allocated by libhal. (modem_device_creator): Implement. (register_built_in_creators): Register the modem creator. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the unused test_dev argument. * src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new): * Ditto. * src/Makefile.am: Add new files to build. Link in ppp-manager. * libnm-util/nm-setting-umts.c: * libnm-util/nm-setting-umts.h: * libnm-util/nm-setting-serial.c: * libnm-util/nm-setting-serial.h: Implement. * libnm-util/Makefile.am: Add new files to build. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-11-29 14:38:07 +00:00
#include "nm-netlink.h"
2007-02-19 Tambet Ingo <tambet@ximian.com> * src/vpn-manager/nm-vpn-manager.c: Handle the DBUS state changes itself. Handle device state changes and disconnect VPN if it's device deactivates. * src/nm-dbus-nm.c: * src/nm-dbus-nm.h: * src/nm-dbus-device.c: * src/nm-dbus-device.c: * src/nm-dbus-net.c: * src/nm-dbus-net.h: Remove. All of it is implemented byt the new dbus API. * src/NetworkManagerMain.h: Get rid of all but 3 properties of NMData. * src/nm-device.c (nm_device_get_by_udi): (nm_device_get_by_iface): Remove. This doesn't belong here and is already implemented in the correct location (NMManager). Rip out all the test_device stuff. * src/NetworkManagerPolicy.c: Remove the leftover activation success and failure handlers, it's all done by NMDevice already. * src/NetworkManager.c: Move the signal handling here from nm-logging.c Remove the iochannel hack to route the unix signals to the main thread since we're not threaded anymore. * src/NetworkManagerAP.c: Implement HWAddress property. * src/NetworkManagerDbus.c: Remove the dbus signal sending code, it happens automatically with dbus-glib. * src/nm-netlink-monitor.c: * src/nm-netlink-monitor.h: - Move it low in the class hierarchy, don't reference any NM types. - Remove private data from the header. - Use type safe checks in public API methods. - Make it a singleton so we don't have to pass the single reference around. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2339 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-02-19 13:09:32 +00:00
#include "nm-netlink-monitor.h"
#include "NetworkManagerSystem.h"
#include "nm-setting-connection.h"
#include "nm-setting-wired.h"
#include "nm-utils.h"
#include "nm-device-802-3-ethernet-glue.h"
G_DEFINE_TYPE (NMDevice8023Ethernet, nm_device_802_3_ethernet, NM_TYPE_DEVICE)
#define NM_DEVICE_802_3_ETHERNET_GET_PRIVATE(o) (G_TYPE_INSTANCE_GET_PRIVATE ((o), NM_TYPE_DEVICE_802_3_ETHERNET, NMDevice8023EthernetPrivate))
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
typedef struct {
gboolean dispose_has_run;
struct ether_addr hw_addr;
char * carrier_file_path;
2006-03-05 Dan Williams <dcbw@redhat.com> Process netlink messages in device subclasses rather than in NetworkManager.c. Also add support for recognizing Wireless Events. * configure.in - Find GLIB_GENMARSHAL * src/Makefile.am - Since we're marshalling custom types for wireless event signals, we get to create our own marshallers using GLIB_GENMARSHAL * src/NetworkManager.c - (nm_monitor_wired_link_state): renamed to nm_monitor_setup - (nm_monitor_setup): renamed from nm_monitor_wired_link_state, and cut down somewhat. We no longer process signals here. - (nm_data_new): create the netlink monitor here, and remove a useless call to nm_policy_schedule_device_change_check() - (nm_data_free): get rid of the netlink monitor here - (nm_device_link_activated, nm_device_link_deactivated): removed - (main): don't create the netlink monitor here, let nm_data_new do that. Call nm_policy_schedule_device_change_check() right before we jump to the mainloop to figure out which device to use first * src/NetworkManagerSystem.[ch] - (nm_system_get_rtnl_index_from_iface, nm_system_get_iface_from_rtnl_index): convert back and forth from interface names to interface indexes * src/nm-device-802-11-wireless.c - (real_init): connect to wireless-event signals from the netlink monitor object - (nm_device_802_11_wireless_event): new function, schedule handler for wireless event signals from the netlink monitor object. We want the handler to run in the device's context - (wireless_event_helper): handle wireless-event signals from netlink - (nm_device_802_11_wireless_dispose): disconnect wireless-event signal handler * src/nm-device-802-11-wireless.h - remove unused prototype for nm_device_802_11_wireless_new * src/nm-device-802-3-ethernet.c - (real_init): new function; set up signal handlers for link events - (nm_device_802_3_ethernet_link_activated): new function, schedule handler for netlink link activated events on device's main loop - (link_activated_helper): when we get a link activated event, set the device's link to be active - (nm_device_802_3_ethernet_link_deactivated): new function; schedule handler for netlink link deactivated events on device's main loop - (link_deactivated_helper): when we get a link deactivated event, set the device's link to be inactive - (nm_device_802_3_ethernet_dispose): disconnect signal handler on dispose * src/nm-device-802-3-ethernet.h - remove unused prototype for nm_device_802_3_ethernet_new * src/nm-device.[ch] - (nm_get_device_by_iface_locked): variant of nm_get_device_by_iface but locks the device list - (nm_device_set_active_link): a little bit of cleanup and de-indenting * src/nm-netlink-monitor.[ch] - (nm_netlink_monitor_class_install_signals): New signal "wireless-event" - (nm_netlink_monitor_new): keep reference to NMData so we can get at the device list - (nm_netlink_monitor_event_handler): expand for wireless events too * src/nm-marshal-main.c - Include generated nm-marshal.c and nm-marshal.h * src/nm-marshal.list - List of custom marshal functions git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1555 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-03-06 01:10:58 +00:00
gulong link_connected_id;
gulong link_disconnected_id;
2006-11-25 Dan Williams <dcbw@redhat.com> * src/supplicant-manager/nm-supplicant-types.h - new file; move all supplicant manager object typedefs here for #include sanity * src/supplicant-manager/nm-supplicant-interface.c src/supplicant-manager/nm-supplicant-interface.h - new file; an object that interfaces an NMDevice object to the supplicant and handles signals from the supplicant. This object does all necessary DBus communication with wpa_supplicant. * src/supplicant-manager/nm-supplicant-manager.c src/supplicant-manager/nm-supplicant-manager.h - Actually do something. Track the state of the wpa_supplicant service and deal with its comings & goings. Handle life events of supplicant interfaces too. - Move NMSupplicantManager typedef to nm-supplicant-types.h * src/supplicant-manager/nm-supplicant-connection.h - Move NMSupplicantConnection typedef to nm-supplicant-types.h * src/supplicant-manager/Makefile.am - Add new files to build, and add libnm-util to includes * src/nm-marshal.list - New marshaler type: VOID:UINT,UINT * src/nm-device-802-3-ethernet.c - (real_init): grab a supplicant interface - (nm_device_802_3_ethernet_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/nm-device-802-11-wireless.c - (real_init): grab a supplicant interface - (nm_device_802_11_wireless_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/NetworkManager.c - (main): create and keep the supplicant manager around for the lifetime of NetworkManager * src/Makefile.am - Link to the supplicant manager sub-library and use the supplicant manager includes git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2125 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-11-25 15:41:04 +00:00
NMSupplicantInterface * sup_iface;
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
} NMDevice8023EthernetPrivate;
enum {
PROP_0,
PROP_HW_ADDRESS,
PROP_SPEED,
LAST_PROP
};
static guint32 nm_device_802_3_ethernet_get_speed (NMDevice8023Ethernet *self);
static gboolean supports_mii_carrier_detect (NMDevice8023Ethernet *dev);
static gboolean supports_ethtool_carrier_detect (NMDevice8023Ethernet *dev);
2006-11-25 Dan Williams <dcbw@redhat.com> * src/supplicant-manager/nm-supplicant-types.h - new file; move all supplicant manager object typedefs here for #include sanity * src/supplicant-manager/nm-supplicant-interface.c src/supplicant-manager/nm-supplicant-interface.h - new file; an object that interfaces an NMDevice object to the supplicant and handles signals from the supplicant. This object does all necessary DBus communication with wpa_supplicant. * src/supplicant-manager/nm-supplicant-manager.c src/supplicant-manager/nm-supplicant-manager.h - Actually do something. Track the state of the wpa_supplicant service and deal with its comings & goings. Handle life events of supplicant interfaces too. - Move NMSupplicantManager typedef to nm-supplicant-types.h * src/supplicant-manager/nm-supplicant-connection.h - Move NMSupplicantConnection typedef to nm-supplicant-types.h * src/supplicant-manager/Makefile.am - Add new files to build, and add libnm-util to includes * src/nm-marshal.list - New marshaler type: VOID:UINT,UINT * src/nm-device-802-3-ethernet.c - (real_init): grab a supplicant interface - (nm_device_802_3_ethernet_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/nm-device-802-11-wireless.c - (real_init): grab a supplicant interface - (nm_device_802_11_wireless_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/NetworkManager.c - (main): create and keep the supplicant manager around for the lifetime of NetworkManager * src/Makefile.am - Link to the supplicant manager sub-library and use the supplicant manager includes git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2125 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-11-25 15:41:04 +00:00
static void supplicant_iface_state_cb (NMSupplicantInterface * iface,
guint32 new_state,
guint32 old_state,
NMDevice8023Ethernet *self);
2006-11-25 Dan Williams <dcbw@redhat.com> * src/supplicant-manager/nm-supplicant-types.h - new file; move all supplicant manager object typedefs here for #include sanity * src/supplicant-manager/nm-supplicant-interface.c src/supplicant-manager/nm-supplicant-interface.h - new file; an object that interfaces an NMDevice object to the supplicant and handles signals from the supplicant. This object does all necessary DBus communication with wpa_supplicant. * src/supplicant-manager/nm-supplicant-manager.c src/supplicant-manager/nm-supplicant-manager.h - Actually do something. Track the state of the wpa_supplicant service and deal with its comings & goings. Handle life events of supplicant interfaces too. - Move NMSupplicantManager typedef to nm-supplicant-types.h * src/supplicant-manager/nm-supplicant-connection.h - Move NMSupplicantConnection typedef to nm-supplicant-types.h * src/supplicant-manager/Makefile.am - Add new files to build, and add libnm-util to includes * src/nm-marshal.list - New marshaler type: VOID:UINT,UINT * src/nm-device-802-3-ethernet.c - (real_init): grab a supplicant interface - (nm_device_802_3_ethernet_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/nm-device-802-11-wireless.c - (real_init): grab a supplicant interface - (nm_device_802_11_wireless_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/NetworkManager.c - (main): create and keep the supplicant manager around for the lifetime of NetworkManager * src/Makefile.am - Link to the supplicant manager sub-library and use the supplicant manager includes git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2125 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-11-25 15:41:04 +00:00
static void
nm_device_802_3_ethernet_carrier_on (NMNetlinkMonitor *monitor,
int idx,
gpointer user_data)
{
NMDevice *dev = NM_DEVICE (user_data);
/* Make sure signal is for us */
2007-11-28 Tambet Ingo <tambet@gmail.com> Merge the beginnings of the new GSM card support. * src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove * the ppp watch source before killing pppd - If this happens from g_object_unref() then the ppp manager is already destroyed by the time the watch callback runs. * src/nm-hal-manager.c: Add a device_type_name string to the * device creators, so that we can print a nice human readable string when a device is added. * src/nm-umts-device.c (automatic_registration_get_network): * Query for the activated network, not much is done with the result thought. * src/nm-serial-device.c (nm_serial_device_get_reply): * Implement. (ppp_ip4_config): Change the device state to activated here for now. (real_check_connection): Make sure the connection includes ppp setting. * libnm-glib/nm-client.c (get_device): Handle umts devices. * libnm-glib/Makefile.am: Add the new files to build. * libnm-glib/nm-umts-device.c: * libnm-glib/nm-umts-device.h: Implement. 2007-11-26 Tambet Ingo <tambet@gmail.com> * src/nm-umts-device.c (automatic_registration_get_network): For * now, dial immediately, nm_serial_device_get_reply() isn't implemented correctly yet. * src/nm-serial-device.c (wait_for_reply_info_destroy): Don't * try to remove the timeout source - this function is only called when the timeout source has been removed. (nm_serial_device_wait_for_reply): Allocate the duplicate responses array to be big enough to contain the terminating zero element as well. The timeout argument is meant to be in seconds now. (real_deactivate_quickly): Implement. * src/NetworkManager.conf: Allow root to own "org.freedesktop.NetworkManager.PPP", deny it for everybody else. * libnm-util/nm-setting-umts.c: Network type and band properties * are ints, (not unsigned ints). * libnm-util/nm-setting-serial.c (nm_setting_serial_class_init): * Fix a small issue with parity bounds - capital letters have lower ascii codes than lower case letters. * libnm-util/nm-connection.c (register_default_settings): * Register serial and umts settings. 2007-11-22 Tambet Ingo <tambet@gmail.com> Remove the "index" property from devices as not all device types have this. * include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove. * src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove. (wired_device_creator): Get the device interface from hal to create the device. (wireless_device_creator): Ditto. * src/nm-device.c (nm_device_init): Remove the index member. (constructor): Remove the checks for index property, make interface property a require constructor property. Use the HAL udi for DBus path for devices. (nm_device_get_index): Remove. (set_property): Remove index handling. (get_property): Ditto. (nm_device_get_dbus_path): Remove. * src/nm-device-interface.c (nm_device_interface_init): Remove * the index property. * src/nm-device-802-3-ethernet.c * (nm_device_802_3_ethernet_link_activated): Access the device index through it's interface. (nm_device_802_3_ethernet_link_deactivated): Ditto. (nm_device_802_3_ethernet_new): Remove the useless argument test_dev. Remove index argument. Add interface argument. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the useless test_dev argument. Remove index argument. Add interface arugment. * src/NetworkManagerSystem.c * (nm_system_device_set_from_ip4_config): Get the device index through interface. (nm_system_set_mtu): Ditto. * introspection/nm-device.xml: Remove the "Index" property. 2007-11-21 Tambet Ingo <tambet@gmail.com> * src/nm-serial-device.c: * src/nm-serial-device.c: * src/nm-umts-device.c: * src/nm-umts-device.h: Implement. * src/nm-hal-manager.c (nm_get_device_driver_name): * libhal_free_string the string allocated by libhal. (modem_device_creator): Implement. (register_built_in_creators): Register the modem creator. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the unused test_dev argument. * src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new): * Ditto. * src/Makefile.am: Add new files to build. Link in ppp-manager. * libnm-util/nm-setting-umts.c: * libnm-util/nm-setting-umts.h: * libnm-util/nm-setting-serial.c: * libnm-util/nm-setting-serial.h: Implement. * libnm-util/Makefile.am: Add new files to build. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-11-29 14:38:07 +00:00
if (nm_netlink_iface_to_index (nm_device_get_iface (dev)) == idx)
nm_device_set_active_link (dev, TRUE);
}
static void
nm_device_802_3_ethernet_carrier_off (NMNetlinkMonitor *monitor,
int idx,
gpointer user_data)
{
NMDevice *dev = NM_DEVICE (user_data);
/* Make sure signal is for us */
2007-11-28 Tambet Ingo <tambet@gmail.com> Merge the beginnings of the new GSM card support. * src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove * the ppp watch source before killing pppd - If this happens from g_object_unref() then the ppp manager is already destroyed by the time the watch callback runs. * src/nm-hal-manager.c: Add a device_type_name string to the * device creators, so that we can print a nice human readable string when a device is added. * src/nm-umts-device.c (automatic_registration_get_network): * Query for the activated network, not much is done with the result thought. * src/nm-serial-device.c (nm_serial_device_get_reply): * Implement. (ppp_ip4_config): Change the device state to activated here for now. (real_check_connection): Make sure the connection includes ppp setting. * libnm-glib/nm-client.c (get_device): Handle umts devices. * libnm-glib/Makefile.am: Add the new files to build. * libnm-glib/nm-umts-device.c: * libnm-glib/nm-umts-device.h: Implement. 2007-11-26 Tambet Ingo <tambet@gmail.com> * src/nm-umts-device.c (automatic_registration_get_network): For * now, dial immediately, nm_serial_device_get_reply() isn't implemented correctly yet. * src/nm-serial-device.c (wait_for_reply_info_destroy): Don't * try to remove the timeout source - this function is only called when the timeout source has been removed. (nm_serial_device_wait_for_reply): Allocate the duplicate responses array to be big enough to contain the terminating zero element as well. The timeout argument is meant to be in seconds now. (real_deactivate_quickly): Implement. * src/NetworkManager.conf: Allow root to own "org.freedesktop.NetworkManager.PPP", deny it for everybody else. * libnm-util/nm-setting-umts.c: Network type and band properties * are ints, (not unsigned ints). * libnm-util/nm-setting-serial.c (nm_setting_serial_class_init): * Fix a small issue with parity bounds - capital letters have lower ascii codes than lower case letters. * libnm-util/nm-connection.c (register_default_settings): * Register serial and umts settings. 2007-11-22 Tambet Ingo <tambet@gmail.com> Remove the "index" property from devices as not all device types have this. * include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove. * src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove. (wired_device_creator): Get the device interface from hal to create the device. (wireless_device_creator): Ditto. * src/nm-device.c (nm_device_init): Remove the index member. (constructor): Remove the checks for index property, make interface property a require constructor property. Use the HAL udi for DBus path for devices. (nm_device_get_index): Remove. (set_property): Remove index handling. (get_property): Ditto. (nm_device_get_dbus_path): Remove. * src/nm-device-interface.c (nm_device_interface_init): Remove * the index property. * src/nm-device-802-3-ethernet.c * (nm_device_802_3_ethernet_link_activated): Access the device index through it's interface. (nm_device_802_3_ethernet_link_deactivated): Ditto. (nm_device_802_3_ethernet_new): Remove the useless argument test_dev. Remove index argument. Add interface argument. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the useless test_dev argument. Remove index argument. Add interface arugment. * src/NetworkManagerSystem.c * (nm_system_device_set_from_ip4_config): Get the device index through interface. (nm_system_set_mtu): Ditto. * introspection/nm-device.xml: Remove the "Index" property. 2007-11-21 Tambet Ingo <tambet@gmail.com> * src/nm-serial-device.c: * src/nm-serial-device.c: * src/nm-umts-device.c: * src/nm-umts-device.h: Implement. * src/nm-hal-manager.c (nm_get_device_driver_name): * libhal_free_string the string allocated by libhal. (modem_device_creator): Implement. (register_built_in_creators): Register the modem creator. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the unused test_dev argument. * src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new): * Ditto. * src/Makefile.am: Add new files to build. Link in ppp-manager. * libnm-util/nm-setting-umts.c: * libnm-util/nm-setting-umts.h: * libnm-util/nm-setting-serial.c: * libnm-util/nm-setting-serial.h: Implement. * libnm-util/Makefile.am: Add new files to build. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-11-29 14:38:07 +00:00
if (nm_netlink_iface_to_index (nm_device_get_iface (dev)) == idx)
nm_device_set_active_link (dev, FALSE);
}
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
static GObject*
constructor (GType type,
guint n_construct_params,
GObjectConstructParam *construct_params)
{
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
GObject *object;
NMDevice8023EthernetPrivate * priv;
NMDevice * dev;
guint32 caps;
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
object = G_OBJECT_CLASS (nm_device_802_3_ethernet_parent_class)->constructor (type,
n_construct_params,
construct_params);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
if (!object)
return NULL;
dev = NM_DEVICE (object);
priv = NM_DEVICE_802_3_ETHERNET_GET_PRIVATE (dev);
2007-11-28 Tambet Ingo <tambet@gmail.com> Merge the beginnings of the new GSM card support. * src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove * the ppp watch source before killing pppd - If this happens from g_object_unref() then the ppp manager is already destroyed by the time the watch callback runs. * src/nm-hal-manager.c: Add a device_type_name string to the * device creators, so that we can print a nice human readable string when a device is added. * src/nm-umts-device.c (automatic_registration_get_network): * Query for the activated network, not much is done with the result thought. * src/nm-serial-device.c (nm_serial_device_get_reply): * Implement. (ppp_ip4_config): Change the device state to activated here for now. (real_check_connection): Make sure the connection includes ppp setting. * libnm-glib/nm-client.c (get_device): Handle umts devices. * libnm-glib/Makefile.am: Add the new files to build. * libnm-glib/nm-umts-device.c: * libnm-glib/nm-umts-device.h: Implement. 2007-11-26 Tambet Ingo <tambet@gmail.com> * src/nm-umts-device.c (automatic_registration_get_network): For * now, dial immediately, nm_serial_device_get_reply() isn't implemented correctly yet. * src/nm-serial-device.c (wait_for_reply_info_destroy): Don't * try to remove the timeout source - this function is only called when the timeout source has been removed. (nm_serial_device_wait_for_reply): Allocate the duplicate responses array to be big enough to contain the terminating zero element as well. The timeout argument is meant to be in seconds now. (real_deactivate_quickly): Implement. * src/NetworkManager.conf: Allow root to own "org.freedesktop.NetworkManager.PPP", deny it for everybody else. * libnm-util/nm-setting-umts.c: Network type and band properties * are ints, (not unsigned ints). * libnm-util/nm-setting-serial.c (nm_setting_serial_class_init): * Fix a small issue with parity bounds - capital letters have lower ascii codes than lower case letters. * libnm-util/nm-connection.c (register_default_settings): * Register serial and umts settings. 2007-11-22 Tambet Ingo <tambet@gmail.com> Remove the "index" property from devices as not all device types have this. * include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove. * src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove. (wired_device_creator): Get the device interface from hal to create the device. (wireless_device_creator): Ditto. * src/nm-device.c (nm_device_init): Remove the index member. (constructor): Remove the checks for index property, make interface property a require constructor property. Use the HAL udi for DBus path for devices. (nm_device_get_index): Remove. (set_property): Remove index handling. (get_property): Ditto. (nm_device_get_dbus_path): Remove. * src/nm-device-interface.c (nm_device_interface_init): Remove * the index property. * src/nm-device-802-3-ethernet.c * (nm_device_802_3_ethernet_link_activated): Access the device index through it's interface. (nm_device_802_3_ethernet_link_deactivated): Ditto. (nm_device_802_3_ethernet_new): Remove the useless argument test_dev. Remove index argument. Add interface argument. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the useless test_dev argument. Remove index argument. Add interface arugment. * src/NetworkManagerSystem.c * (nm_system_device_set_from_ip4_config): Get the device index through interface. (nm_system_set_mtu): Ditto. * introspection/nm-device.xml: Remove the "Index" property. 2007-11-21 Tambet Ingo <tambet@gmail.com> * src/nm-serial-device.c: * src/nm-serial-device.c: * src/nm-umts-device.c: * src/nm-umts-device.h: Implement. * src/nm-hal-manager.c (nm_get_device_driver_name): * libhal_free_string the string allocated by libhal. (modem_device_creator): Implement. (register_built_in_creators): Register the modem creator. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the unused test_dev argument. * src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new): * Ditto. * src/Makefile.am: Add new files to build. Link in ppp-manager. * libnm-util/nm-setting-umts.c: * libnm-util/nm-setting-umts.h: * libnm-util/nm-setting-serial.c: * libnm-util/nm-setting-serial.h: Implement. * libnm-util/Makefile.am: Add new files to build. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-11-29 14:38:07 +00:00
priv->carrier_file_path = g_strdup_printf ("/sys/class/net/%s/carrier",
nm_device_get_iface (dev));
caps = nm_device_get_capabilities (dev);
if (caps & NM_DEVICE_CAP_CARRIER_DETECT) {
/* Only listen to netlink for cards that support carrier detect */
NMNetlinkMonitor * monitor = nm_netlink_monitor_get ();
priv->link_connected_id = g_signal_connect (monitor, "carrier-on",
G_CALLBACK (nm_device_802_3_ethernet_carrier_on),
dev);
priv->link_disconnected_id = g_signal_connect (monitor, "carrier-off",
G_CALLBACK (nm_device_802_3_ethernet_carrier_off),
dev);
g_object_unref (monitor);
} else {
priv->link_connected_id = 0;
priv->link_disconnected_id = 0;
nm_device_set_active_link (dev, TRUE);
}
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
return object;
}
2006-03-05 Dan Williams <dcbw@redhat.com> Process netlink messages in device subclasses rather than in NetworkManager.c. Also add support for recognizing Wireless Events. * configure.in - Find GLIB_GENMARSHAL * src/Makefile.am - Since we're marshalling custom types for wireless event signals, we get to create our own marshallers using GLIB_GENMARSHAL * src/NetworkManager.c - (nm_monitor_wired_link_state): renamed to nm_monitor_setup - (nm_monitor_setup): renamed from nm_monitor_wired_link_state, and cut down somewhat. We no longer process signals here. - (nm_data_new): create the netlink monitor here, and remove a useless call to nm_policy_schedule_device_change_check() - (nm_data_free): get rid of the netlink monitor here - (nm_device_link_activated, nm_device_link_deactivated): removed - (main): don't create the netlink monitor here, let nm_data_new do that. Call nm_policy_schedule_device_change_check() right before we jump to the mainloop to figure out which device to use first * src/NetworkManagerSystem.[ch] - (nm_system_get_rtnl_index_from_iface, nm_system_get_iface_from_rtnl_index): convert back and forth from interface names to interface indexes * src/nm-device-802-11-wireless.c - (real_init): connect to wireless-event signals from the netlink monitor object - (nm_device_802_11_wireless_event): new function, schedule handler for wireless event signals from the netlink monitor object. We want the handler to run in the device's context - (wireless_event_helper): handle wireless-event signals from netlink - (nm_device_802_11_wireless_dispose): disconnect wireless-event signal handler * src/nm-device-802-11-wireless.h - remove unused prototype for nm_device_802_11_wireless_new * src/nm-device-802-3-ethernet.c - (real_init): new function; set up signal handlers for link events - (nm_device_802_3_ethernet_link_activated): new function, schedule handler for netlink link activated events on device's main loop - (link_activated_helper): when we get a link activated event, set the device's link to be active - (nm_device_802_3_ethernet_link_deactivated): new function; schedule handler for netlink link deactivated events on device's main loop - (link_deactivated_helper): when we get a link deactivated event, set the device's link to be inactive - (nm_device_802_3_ethernet_dispose): disconnect signal handler on dispose * src/nm-device-802-3-ethernet.h - remove unused prototype for nm_device_802_3_ethernet_new * src/nm-device.[ch] - (nm_get_device_by_iface_locked): variant of nm_get_device_by_iface but locks the device list - (nm_device_set_active_link): a little bit of cleanup and de-indenting * src/nm-netlink-monitor.[ch] - (nm_netlink_monitor_class_install_signals): New signal "wireless-event" - (nm_netlink_monitor_new): keep reference to NMData so we can get at the device list - (nm_netlink_monitor_event_handler): expand for wireless events too * src/nm-marshal-main.c - Include generated nm-marshal.c and nm-marshal.h * src/nm-marshal.list - List of custom marshal functions git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1555 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-03-06 01:10:58 +00:00
static void
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
nm_device_802_3_ethernet_init (NMDevice8023Ethernet * self)
2006-03-05 Dan Williams <dcbw@redhat.com> Process netlink messages in device subclasses rather than in NetworkManager.c. Also add support for recognizing Wireless Events. * configure.in - Find GLIB_GENMARSHAL * src/Makefile.am - Since we're marshalling custom types for wireless event signals, we get to create our own marshallers using GLIB_GENMARSHAL * src/NetworkManager.c - (nm_monitor_wired_link_state): renamed to nm_monitor_setup - (nm_monitor_setup): renamed from nm_monitor_wired_link_state, and cut down somewhat. We no longer process signals here. - (nm_data_new): create the netlink monitor here, and remove a useless call to nm_policy_schedule_device_change_check() - (nm_data_free): get rid of the netlink monitor here - (nm_device_link_activated, nm_device_link_deactivated): removed - (main): don't create the netlink monitor here, let nm_data_new do that. Call nm_policy_schedule_device_change_check() right before we jump to the mainloop to figure out which device to use first * src/NetworkManagerSystem.[ch] - (nm_system_get_rtnl_index_from_iface, nm_system_get_iface_from_rtnl_index): convert back and forth from interface names to interface indexes * src/nm-device-802-11-wireless.c - (real_init): connect to wireless-event signals from the netlink monitor object - (nm_device_802_11_wireless_event): new function, schedule handler for wireless event signals from the netlink monitor object. We want the handler to run in the device's context - (wireless_event_helper): handle wireless-event signals from netlink - (nm_device_802_11_wireless_dispose): disconnect wireless-event signal handler * src/nm-device-802-11-wireless.h - remove unused prototype for nm_device_802_11_wireless_new * src/nm-device-802-3-ethernet.c - (real_init): new function; set up signal handlers for link events - (nm_device_802_3_ethernet_link_activated): new function, schedule handler for netlink link activated events on device's main loop - (link_activated_helper): when we get a link activated event, set the device's link to be active - (nm_device_802_3_ethernet_link_deactivated): new function; schedule handler for netlink link deactivated events on device's main loop - (link_deactivated_helper): when we get a link deactivated event, set the device's link to be inactive - (nm_device_802_3_ethernet_dispose): disconnect signal handler on dispose * src/nm-device-802-3-ethernet.h - remove unused prototype for nm_device_802_3_ethernet_new * src/nm-device.[ch] - (nm_get_device_by_iface_locked): variant of nm_get_device_by_iface but locks the device list - (nm_device_set_active_link): a little bit of cleanup and de-indenting * src/nm-netlink-monitor.[ch] - (nm_netlink_monitor_class_install_signals): New signal "wireless-event" - (nm_netlink_monitor_new): keep reference to NMData so we can get at the device list - (nm_netlink_monitor_event_handler): expand for wireless events too * src/nm-marshal-main.c - Include generated nm-marshal.c and nm-marshal.h * src/nm-marshal.list - List of custom marshal functions git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1555 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-03-06 01:10:58 +00:00
{
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
NMDevice8023EthernetPrivate *priv = NM_DEVICE_802_3_ETHERNET_GET_PRIVATE (self);
2006-03-05 Dan Williams <dcbw@redhat.com> Process netlink messages in device subclasses rather than in NetworkManager.c. Also add support for recognizing Wireless Events. * configure.in - Find GLIB_GENMARSHAL * src/Makefile.am - Since we're marshalling custom types for wireless event signals, we get to create our own marshallers using GLIB_GENMARSHAL * src/NetworkManager.c - (nm_monitor_wired_link_state): renamed to nm_monitor_setup - (nm_monitor_setup): renamed from nm_monitor_wired_link_state, and cut down somewhat. We no longer process signals here. - (nm_data_new): create the netlink monitor here, and remove a useless call to nm_policy_schedule_device_change_check() - (nm_data_free): get rid of the netlink monitor here - (nm_device_link_activated, nm_device_link_deactivated): removed - (main): don't create the netlink monitor here, let nm_data_new do that. Call nm_policy_schedule_device_change_check() right before we jump to the mainloop to figure out which device to use first * src/NetworkManagerSystem.[ch] - (nm_system_get_rtnl_index_from_iface, nm_system_get_iface_from_rtnl_index): convert back and forth from interface names to interface indexes * src/nm-device-802-11-wireless.c - (real_init): connect to wireless-event signals from the netlink monitor object - (nm_device_802_11_wireless_event): new function, schedule handler for wireless event signals from the netlink monitor object. We want the handler to run in the device's context - (wireless_event_helper): handle wireless-event signals from netlink - (nm_device_802_11_wireless_dispose): disconnect wireless-event signal handler * src/nm-device-802-11-wireless.h - remove unused prototype for nm_device_802_11_wireless_new * src/nm-device-802-3-ethernet.c - (real_init): new function; set up signal handlers for link events - (nm_device_802_3_ethernet_link_activated): new function, schedule handler for netlink link activated events on device's main loop - (link_activated_helper): when we get a link activated event, set the device's link to be active - (nm_device_802_3_ethernet_link_deactivated): new function; schedule handler for netlink link deactivated events on device's main loop - (link_deactivated_helper): when we get a link deactivated event, set the device's link to be inactive - (nm_device_802_3_ethernet_dispose): disconnect signal handler on dispose * src/nm-device-802-3-ethernet.h - remove unused prototype for nm_device_802_3_ethernet_new * src/nm-device.[ch] - (nm_get_device_by_iface_locked): variant of nm_get_device_by_iface but locks the device list - (nm_device_set_active_link): a little bit of cleanup and de-indenting * src/nm-netlink-monitor.[ch] - (nm_netlink_monitor_class_install_signals): New signal "wireless-event" - (nm_netlink_monitor_new): keep reference to NMData so we can get at the device list - (nm_netlink_monitor_event_handler): expand for wireless events too * src/nm-marshal-main.c - Include generated nm-marshal.c and nm-marshal.h * src/nm-marshal.list - List of custom marshal functions git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1555 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-03-06 01:10:58 +00:00
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
priv->dispose_has_run = FALSE;
2006-03-05 Dan Williams <dcbw@redhat.com> Process netlink messages in device subclasses rather than in NetworkManager.c. Also add support for recognizing Wireless Events. * configure.in - Find GLIB_GENMARSHAL * src/Makefile.am - Since we're marshalling custom types for wireless event signals, we get to create our own marshallers using GLIB_GENMARSHAL * src/NetworkManager.c - (nm_monitor_wired_link_state): renamed to nm_monitor_setup - (nm_monitor_setup): renamed from nm_monitor_wired_link_state, and cut down somewhat. We no longer process signals here. - (nm_data_new): create the netlink monitor here, and remove a useless call to nm_policy_schedule_device_change_check() - (nm_data_free): get rid of the netlink monitor here - (nm_device_link_activated, nm_device_link_deactivated): removed - (main): don't create the netlink monitor here, let nm_data_new do that. Call nm_policy_schedule_device_change_check() right before we jump to the mainloop to figure out which device to use first * src/NetworkManagerSystem.[ch] - (nm_system_get_rtnl_index_from_iface, nm_system_get_iface_from_rtnl_index): convert back and forth from interface names to interface indexes * src/nm-device-802-11-wireless.c - (real_init): connect to wireless-event signals from the netlink monitor object - (nm_device_802_11_wireless_event): new function, schedule handler for wireless event signals from the netlink monitor object. We want the handler to run in the device's context - (wireless_event_helper): handle wireless-event signals from netlink - (nm_device_802_11_wireless_dispose): disconnect wireless-event signal handler * src/nm-device-802-11-wireless.h - remove unused prototype for nm_device_802_11_wireless_new * src/nm-device-802-3-ethernet.c - (real_init): new function; set up signal handlers for link events - (nm_device_802_3_ethernet_link_activated): new function, schedule handler for netlink link activated events on device's main loop - (link_activated_helper): when we get a link activated event, set the device's link to be active - (nm_device_802_3_ethernet_link_deactivated): new function; schedule handler for netlink link deactivated events on device's main loop - (link_deactivated_helper): when we get a link deactivated event, set the device's link to be inactive - (nm_device_802_3_ethernet_dispose): disconnect signal handler on dispose * src/nm-device-802-3-ethernet.h - remove unused prototype for nm_device_802_3_ethernet_new * src/nm-device.[ch] - (nm_get_device_by_iface_locked): variant of nm_get_device_by_iface but locks the device list - (nm_device_set_active_link): a little bit of cleanup and de-indenting * src/nm-netlink-monitor.[ch] - (nm_netlink_monitor_class_install_signals): New signal "wireless-event" - (nm_netlink_monitor_new): keep reference to NMData so we can get at the device list - (nm_netlink_monitor_event_handler): expand for wireless events too * src/nm-marshal-main.c - Include generated nm-marshal.c and nm-marshal.h * src/nm-marshal.list - List of custom marshal functions git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1555 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-03-06 01:10:58 +00:00
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
memset (&(priv->hw_addr), 0, sizeof (struct ether_addr));
2006-11-25 Dan Williams <dcbw@redhat.com> * src/supplicant-manager/nm-supplicant-types.h - new file; move all supplicant manager object typedefs here for #include sanity * src/supplicant-manager/nm-supplicant-interface.c src/supplicant-manager/nm-supplicant-interface.h - new file; an object that interfaces an NMDevice object to the supplicant and handles signals from the supplicant. This object does all necessary DBus communication with wpa_supplicant. * src/supplicant-manager/nm-supplicant-manager.c src/supplicant-manager/nm-supplicant-manager.h - Actually do something. Track the state of the wpa_supplicant service and deal with its comings & goings. Handle life events of supplicant interfaces too. - Move NMSupplicantManager typedef to nm-supplicant-types.h * src/supplicant-manager/nm-supplicant-connection.h - Move NMSupplicantConnection typedef to nm-supplicant-types.h * src/supplicant-manager/Makefile.am - Add new files to build, and add libnm-util to includes * src/nm-marshal.list - New marshaler type: VOID:UINT,UINT * src/nm-device-802-3-ethernet.c - (real_init): grab a supplicant interface - (nm_device_802_3_ethernet_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/nm-device-802-11-wireless.c - (real_init): grab a supplicant interface - (nm_device_802_11_wireless_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/NetworkManager.c - (main): create and keep the supplicant manager around for the lifetime of NetworkManager * src/Makefile.am - Link to the supplicant manager sub-library and use the supplicant manager includes git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2125 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-11-25 15:41:04 +00:00
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
nm_device_set_device_type (NM_DEVICE (self), DEVICE_TYPE_802_3_ETHERNET);
2006-03-05 Dan Williams <dcbw@redhat.com> Process netlink messages in device subclasses rather than in NetworkManager.c. Also add support for recognizing Wireless Events. * configure.in - Find GLIB_GENMARSHAL * src/Makefile.am - Since we're marshalling custom types for wireless event signals, we get to create our own marshallers using GLIB_GENMARSHAL * src/NetworkManager.c - (nm_monitor_wired_link_state): renamed to nm_monitor_setup - (nm_monitor_setup): renamed from nm_monitor_wired_link_state, and cut down somewhat. We no longer process signals here. - (nm_data_new): create the netlink monitor here, and remove a useless call to nm_policy_schedule_device_change_check() - (nm_data_free): get rid of the netlink monitor here - (nm_device_link_activated, nm_device_link_deactivated): removed - (main): don't create the netlink monitor here, let nm_data_new do that. Call nm_policy_schedule_device_change_check() right before we jump to the mainloop to figure out which device to use first * src/NetworkManagerSystem.[ch] - (nm_system_get_rtnl_index_from_iface, nm_system_get_iface_from_rtnl_index): convert back and forth from interface names to interface indexes * src/nm-device-802-11-wireless.c - (real_init): connect to wireless-event signals from the netlink monitor object - (nm_device_802_11_wireless_event): new function, schedule handler for wireless event signals from the netlink monitor object. We want the handler to run in the device's context - (wireless_event_helper): handle wireless-event signals from netlink - (nm_device_802_11_wireless_dispose): disconnect wireless-event signal handler * src/nm-device-802-11-wireless.h - remove unused prototype for nm_device_802_11_wireless_new * src/nm-device-802-3-ethernet.c - (real_init): new function; set up signal handlers for link events - (nm_device_802_3_ethernet_link_activated): new function, schedule handler for netlink link activated events on device's main loop - (link_activated_helper): when we get a link activated event, set the device's link to be active - (nm_device_802_3_ethernet_link_deactivated): new function; schedule handler for netlink link deactivated events on device's main loop - (link_deactivated_helper): when we get a link deactivated event, set the device's link to be inactive - (nm_device_802_3_ethernet_dispose): disconnect signal handler on dispose * src/nm-device-802-3-ethernet.h - remove unused prototype for nm_device_802_3_ethernet_new * src/nm-device.[ch] - (nm_get_device_by_iface_locked): variant of nm_get_device_by_iface but locks the device list - (nm_device_set_active_link): a little bit of cleanup and de-indenting * src/nm-netlink-monitor.[ch] - (nm_netlink_monitor_class_install_signals): New signal "wireless-event" - (nm_netlink_monitor_new): keep reference to NMData so we can get at the device list - (nm_netlink_monitor_event_handler): expand for wireless events too * src/nm-marshal-main.c - Include generated nm-marshal.c and nm-marshal.h * src/nm-marshal.list - List of custom marshal functions git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1555 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-03-06 01:10:58 +00:00
}
static void
real_update_link (NMDevice *dev)
{
NMDevice8023EthernetPrivate *priv = NM_DEVICE_802_3_ETHERNET_GET_PRIVATE (dev);
gboolean have_link = FALSE;
guint32 caps;
gchar * contents;
gsize length;
/* Devices that don't support carrier detect are always "on" and
* must be manually chosen by the user.
*/
caps = nm_device_get_capabilities (dev);
if (!(caps & NM_DEVICE_CAP_CARRIER_DETECT)) {
have_link = TRUE;
goto out;
}
if (g_file_get_contents (priv->carrier_file_path, &contents, &length, NULL)) {
have_link = atoi (contents) > 0 ? TRUE : FALSE;
g_free (contents);
}
out:
nm_device_set_active_link (dev, have_link);
}
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
static gboolean
real_is_up (NMDevice *device)
{
/* Try device-specific tests first */
if (NM_DEVICE_802_3_ETHERNET_GET_PRIVATE (device)->sup_iface)
return TRUE;
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
return NM_DEVICE_CLASS (nm_device_802_3_ethernet_parent_class)->is_up (device);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
}
static gboolean
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
real_bring_up (NMDevice *dev)
{
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
NMDevice8023EthernetPrivate *priv = NM_DEVICE_802_3_ETHERNET_GET_PRIVATE (dev);
NMSupplicantManager *sup_mgr;
const char *iface;
iface = nm_device_get_iface (dev);
sup_mgr = nm_supplicant_manager_get ();
priv->sup_iface = nm_supplicant_manager_get_iface (sup_mgr, iface, FALSE);
if (!priv->sup_iface) {
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
nm_warning ("Couldn't initialize supplicant interface for %s.", iface);
g_object_unref (sup_mgr);
return FALSE;
}
g_signal_connect (priv->sup_iface,
"state",
G_CALLBACK (supplicant_iface_state_cb),
dev);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
g_object_unref (sup_mgr);
return TRUE;
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
}
static void
real_bring_down (NMDevice *dev)
{
NMDevice8023EthernetPrivate *priv = NM_DEVICE_802_3_ETHERNET_GET_PRIVATE (dev);
NMSupplicantManager *sup_mgr;
sup_mgr = nm_supplicant_manager_get ();
if (priv->sup_iface) {
nm_supplicant_manager_release_iface (sup_mgr, priv->sup_iface);
priv->sup_iface = NULL;
}
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
g_object_unref (sup_mgr);
}
NMDevice8023Ethernet *
2007-11-28 Tambet Ingo <tambet@gmail.com> Merge the beginnings of the new GSM card support. * src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove * the ppp watch source before killing pppd - If this happens from g_object_unref() then the ppp manager is already destroyed by the time the watch callback runs. * src/nm-hal-manager.c: Add a device_type_name string to the * device creators, so that we can print a nice human readable string when a device is added. * src/nm-umts-device.c (automatic_registration_get_network): * Query for the activated network, not much is done with the result thought. * src/nm-serial-device.c (nm_serial_device_get_reply): * Implement. (ppp_ip4_config): Change the device state to activated here for now. (real_check_connection): Make sure the connection includes ppp setting. * libnm-glib/nm-client.c (get_device): Handle umts devices. * libnm-glib/Makefile.am: Add the new files to build. * libnm-glib/nm-umts-device.c: * libnm-glib/nm-umts-device.h: Implement. 2007-11-26 Tambet Ingo <tambet@gmail.com> * src/nm-umts-device.c (automatic_registration_get_network): For * now, dial immediately, nm_serial_device_get_reply() isn't implemented correctly yet. * src/nm-serial-device.c (wait_for_reply_info_destroy): Don't * try to remove the timeout source - this function is only called when the timeout source has been removed. (nm_serial_device_wait_for_reply): Allocate the duplicate responses array to be big enough to contain the terminating zero element as well. The timeout argument is meant to be in seconds now. (real_deactivate_quickly): Implement. * src/NetworkManager.conf: Allow root to own "org.freedesktop.NetworkManager.PPP", deny it for everybody else. * libnm-util/nm-setting-umts.c: Network type and band properties * are ints, (not unsigned ints). * libnm-util/nm-setting-serial.c (nm_setting_serial_class_init): * Fix a small issue with parity bounds - capital letters have lower ascii codes than lower case letters. * libnm-util/nm-connection.c (register_default_settings): * Register serial and umts settings. 2007-11-22 Tambet Ingo <tambet@gmail.com> Remove the "index" property from devices as not all device types have this. * include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove. * src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove. (wired_device_creator): Get the device interface from hal to create the device. (wireless_device_creator): Ditto. * src/nm-device.c (nm_device_init): Remove the index member. (constructor): Remove the checks for index property, make interface property a require constructor property. Use the HAL udi for DBus path for devices. (nm_device_get_index): Remove. (set_property): Remove index handling. (get_property): Ditto. (nm_device_get_dbus_path): Remove. * src/nm-device-interface.c (nm_device_interface_init): Remove * the index property. * src/nm-device-802-3-ethernet.c * (nm_device_802_3_ethernet_link_activated): Access the device index through it's interface. (nm_device_802_3_ethernet_link_deactivated): Ditto. (nm_device_802_3_ethernet_new): Remove the useless argument test_dev. Remove index argument. Add interface argument. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the useless test_dev argument. Remove index argument. Add interface arugment. * src/NetworkManagerSystem.c * (nm_system_device_set_from_ip4_config): Get the device index through interface. (nm_system_set_mtu): Ditto. * introspection/nm-device.xml: Remove the "Index" property. 2007-11-21 Tambet Ingo <tambet@gmail.com> * src/nm-serial-device.c: * src/nm-serial-device.c: * src/nm-umts-device.c: * src/nm-umts-device.h: Implement. * src/nm-hal-manager.c (nm_get_device_driver_name): * libhal_free_string the string allocated by libhal. (modem_device_creator): Implement. (register_built_in_creators): Register the modem creator. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the unused test_dev argument. * src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new): * Ditto. * src/Makefile.am: Add new files to build. Link in ppp-manager. * libnm-util/nm-setting-umts.c: * libnm-util/nm-setting-umts.h: * libnm-util/nm-setting-serial.c: * libnm-util/nm-setting-serial.h: Implement. * libnm-util/Makefile.am: Add new files to build. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-11-29 14:38:07 +00:00
nm_device_802_3_ethernet_new (const char *udi,
const char *iface,
const char *driver)
{
g_return_val_if_fail (udi != NULL, NULL);
2007-11-28 Tambet Ingo <tambet@gmail.com> Merge the beginnings of the new GSM card support. * src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove * the ppp watch source before killing pppd - If this happens from g_object_unref() then the ppp manager is already destroyed by the time the watch callback runs. * src/nm-hal-manager.c: Add a device_type_name string to the * device creators, so that we can print a nice human readable string when a device is added. * src/nm-umts-device.c (automatic_registration_get_network): * Query for the activated network, not much is done with the result thought. * src/nm-serial-device.c (nm_serial_device_get_reply): * Implement. (ppp_ip4_config): Change the device state to activated here for now. (real_check_connection): Make sure the connection includes ppp setting. * libnm-glib/nm-client.c (get_device): Handle umts devices. * libnm-glib/Makefile.am: Add the new files to build. * libnm-glib/nm-umts-device.c: * libnm-glib/nm-umts-device.h: Implement. 2007-11-26 Tambet Ingo <tambet@gmail.com> * src/nm-umts-device.c (automatic_registration_get_network): For * now, dial immediately, nm_serial_device_get_reply() isn't implemented correctly yet. * src/nm-serial-device.c (wait_for_reply_info_destroy): Don't * try to remove the timeout source - this function is only called when the timeout source has been removed. (nm_serial_device_wait_for_reply): Allocate the duplicate responses array to be big enough to contain the terminating zero element as well. The timeout argument is meant to be in seconds now. (real_deactivate_quickly): Implement. * src/NetworkManager.conf: Allow root to own "org.freedesktop.NetworkManager.PPP", deny it for everybody else. * libnm-util/nm-setting-umts.c: Network type and band properties * are ints, (not unsigned ints). * libnm-util/nm-setting-serial.c (nm_setting_serial_class_init): * Fix a small issue with parity bounds - capital letters have lower ascii codes than lower case letters. * libnm-util/nm-connection.c (register_default_settings): * Register serial and umts settings. 2007-11-22 Tambet Ingo <tambet@gmail.com> Remove the "index" property from devices as not all device types have this. * include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove. * src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove. (wired_device_creator): Get the device interface from hal to create the device. (wireless_device_creator): Ditto. * src/nm-device.c (nm_device_init): Remove the index member. (constructor): Remove the checks for index property, make interface property a require constructor property. Use the HAL udi for DBus path for devices. (nm_device_get_index): Remove. (set_property): Remove index handling. (get_property): Ditto. (nm_device_get_dbus_path): Remove. * src/nm-device-interface.c (nm_device_interface_init): Remove * the index property. * src/nm-device-802-3-ethernet.c * (nm_device_802_3_ethernet_link_activated): Access the device index through it's interface. (nm_device_802_3_ethernet_link_deactivated): Ditto. (nm_device_802_3_ethernet_new): Remove the useless argument test_dev. Remove index argument. Add interface argument. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the useless test_dev argument. Remove index argument. Add interface arugment. * src/NetworkManagerSystem.c * (nm_system_device_set_from_ip4_config): Get the device index through interface. (nm_system_set_mtu): Ditto. * introspection/nm-device.xml: Remove the "Index" property. 2007-11-21 Tambet Ingo <tambet@gmail.com> * src/nm-serial-device.c: * src/nm-serial-device.c: * src/nm-umts-device.c: * src/nm-umts-device.h: Implement. * src/nm-hal-manager.c (nm_get_device_driver_name): * libhal_free_string the string allocated by libhal. (modem_device_creator): Implement. (register_built_in_creators): Register the modem creator. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the unused test_dev argument. * src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new): * Ditto. * src/Makefile.am: Add new files to build. Link in ppp-manager. * libnm-util/nm-setting-umts.c: * libnm-util/nm-setting-umts.h: * libnm-util/nm-setting-serial.c: * libnm-util/nm-setting-serial.h: Implement. * libnm-util/Makefile.am: Add new files to build. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-11-29 14:38:07 +00:00
g_return_val_if_fail (iface != NULL, NULL);
g_return_val_if_fail (driver != NULL, NULL);
2007-11-28 Tambet Ingo <tambet@gmail.com> Merge the beginnings of the new GSM card support. * src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove * the ppp watch source before killing pppd - If this happens from g_object_unref() then the ppp manager is already destroyed by the time the watch callback runs. * src/nm-hal-manager.c: Add a device_type_name string to the * device creators, so that we can print a nice human readable string when a device is added. * src/nm-umts-device.c (automatic_registration_get_network): * Query for the activated network, not much is done with the result thought. * src/nm-serial-device.c (nm_serial_device_get_reply): * Implement. (ppp_ip4_config): Change the device state to activated here for now. (real_check_connection): Make sure the connection includes ppp setting. * libnm-glib/nm-client.c (get_device): Handle umts devices. * libnm-glib/Makefile.am: Add the new files to build. * libnm-glib/nm-umts-device.c: * libnm-glib/nm-umts-device.h: Implement. 2007-11-26 Tambet Ingo <tambet@gmail.com> * src/nm-umts-device.c (automatic_registration_get_network): For * now, dial immediately, nm_serial_device_get_reply() isn't implemented correctly yet. * src/nm-serial-device.c (wait_for_reply_info_destroy): Don't * try to remove the timeout source - this function is only called when the timeout source has been removed. (nm_serial_device_wait_for_reply): Allocate the duplicate responses array to be big enough to contain the terminating zero element as well. The timeout argument is meant to be in seconds now. (real_deactivate_quickly): Implement. * src/NetworkManager.conf: Allow root to own "org.freedesktop.NetworkManager.PPP", deny it for everybody else. * libnm-util/nm-setting-umts.c: Network type and band properties * are ints, (not unsigned ints). * libnm-util/nm-setting-serial.c (nm_setting_serial_class_init): * Fix a small issue with parity bounds - capital letters have lower ascii codes than lower case letters. * libnm-util/nm-connection.c (register_default_settings): * Register serial and umts settings. 2007-11-22 Tambet Ingo <tambet@gmail.com> Remove the "index" property from devices as not all device types have this. * include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove. * src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove. (wired_device_creator): Get the device interface from hal to create the device. (wireless_device_creator): Ditto. * src/nm-device.c (nm_device_init): Remove the index member. (constructor): Remove the checks for index property, make interface property a require constructor property. Use the HAL udi for DBus path for devices. (nm_device_get_index): Remove. (set_property): Remove index handling. (get_property): Ditto. (nm_device_get_dbus_path): Remove. * src/nm-device-interface.c (nm_device_interface_init): Remove * the index property. * src/nm-device-802-3-ethernet.c * (nm_device_802_3_ethernet_link_activated): Access the device index through it's interface. (nm_device_802_3_ethernet_link_deactivated): Ditto. (nm_device_802_3_ethernet_new): Remove the useless argument test_dev. Remove index argument. Add interface argument. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the useless test_dev argument. Remove index argument. Add interface arugment. * src/NetworkManagerSystem.c * (nm_system_device_set_from_ip4_config): Get the device index through interface. (nm_system_set_mtu): Ditto. * introspection/nm-device.xml: Remove the "Index" property. 2007-11-21 Tambet Ingo <tambet@gmail.com> * src/nm-serial-device.c: * src/nm-serial-device.c: * src/nm-umts-device.c: * src/nm-umts-device.h: Implement. * src/nm-hal-manager.c (nm_get_device_driver_name): * libhal_free_string the string allocated by libhal. (modem_device_creator): Implement. (register_built_in_creators): Register the modem creator. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the unused test_dev argument. * src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new): * Ditto. * src/Makefile.am: Add new files to build. Link in ppp-manager. * libnm-util/nm-setting-umts.c: * libnm-util/nm-setting-umts.h: * libnm-util/nm-setting-serial.c: * libnm-util/nm-setting-serial.h: Implement. * libnm-util/Makefile.am: Add new files to build. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-11-29 14:38:07 +00:00
return (NMDevice8023Ethernet *) g_object_new (NM_TYPE_DEVICE_802_3_ETHERNET,
NM_DEVICE_INTERFACE_UDI, udi,
NM_DEVICE_INTERFACE_IFACE, iface,
NM_DEVICE_INTERFACE_DRIVER, driver,
NULL);
}
/*
* nm_device_802_3_ethernet_get_address
*
* Get a device's hardware address
*
*/
void
nm_device_802_3_ethernet_get_address (NMDevice8023Ethernet *self, struct ether_addr *addr)
{
g_return_if_fail (self != NULL);
g_return_if_fail (addr != NULL);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
memcpy (addr, &(NM_DEVICE_802_3_ETHERNET_GET_PRIVATE (self)->hw_addr), sizeof (struct ether_addr));
}
static void
real_set_hw_address (NMDevice *dev)
{
NMDevice8023Ethernet *self = NM_DEVICE_802_3_ETHERNET (dev);
struct ifreq req;
NMSock *sk;
int ret;
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
sk = nm_dev_sock_open (nm_device_get_iface (dev), DEV_GENERAL, __FUNCTION__, NULL);
if (!sk)
return;
memset (&req, 0, sizeof (struct ifreq));
strncpy (req.ifr_name, nm_device_get_iface (dev), sizeof (req.ifr_name) - 1);
ret = ioctl (nm_dev_sock_get_fd (sk), SIOCGIFHWADDR, &req);
if (ret == 0)
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
memcpy (&(NM_DEVICE_802_3_ETHERNET_GET_PRIVATE (self)->hw_addr),
&(req.ifr_hwaddr.sa_data), sizeof (struct ether_addr));
nm_dev_sock_close (sk);
}
static guint32
real_get_generic_capabilities (NMDevice *dev)
{
NMDevice8023Ethernet * self = NM_DEVICE_802_3_ETHERNET (dev);
guint32 caps = NM_DEVICE_CAP_NONE;
/* cipsec devices are also explicitly unsupported at this time */
if (strstr (nm_device_get_iface (dev), "cipsec"))
return NM_DEVICE_CAP_NONE;
if (supports_ethtool_carrier_detect (self) || supports_mii_carrier_detect (self))
caps |= NM_DEVICE_CAP_CARRIER_DETECT;
caps |= NM_DEVICE_CAP_NM_SUPPORTED;
return caps;
}
static gboolean
real_can_interrupt_activation (NMDevice *dev)
{
gboolean interrupt = FALSE;
/* Devices that support carrier detect can interrupt activation
* if the link becomes inactive.
*/
if (nm_device_get_capabilities (dev) & NM_DEVICE_CAP_CARRIER_DETECT) {
if (nm_device_has_active_link (dev) == FALSE) {
interrupt = TRUE;
}
}
return interrupt;
}
2007-09-09 Dan Williams <dcbw@redhat.com> * introspection/nm-device.xml - The 'Activate' method now takes 3 arguments, a service name for the settings service (user or system), the object path of the connection to activate, and the specific object to activate, if any * src/nm-device-interface.c - (nm_device_interface_error_quark, nm_device_interface_error_get_type): Add error bits - (impl_device_activate): adapt to new Activate arguments; validate the service name and get the Connection object from the NMManager before starting to activate the device with the specified connection * src/nm-device-802-3-ethernet.c - (real_get_best_connection): find the best connection, or create a default one if no existing connections can be used * src/NetworkManagerPolicy.c - (nm_policy_auto_get_best_device): Get the device's best connection and only pick the device if it has one - (nm_policy_device_change_check): disable wireless bits for now until wireless get_best_connection() can be implemented (replacing "best_ap"); don't create a default connection here as the device subclass will do that if needed * src/nm-manager.h src/nm-manager.c - (nm_manager_get): make NMManager a singleton and expose the getter internally - Rework internal NMManager connection handling to use the same routines for both the system and user settings services. Most calls take a new NMConnectionType argument specifying either system or user connections - (nm_manager_get_connection_by_object_path): new function; get a connection keyed on its object path * src/NetworkManager.c - (main): use nm_manager_get() git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2776 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-09-09 22:18:42 +00:00
typedef struct BestConnectionInfo {
NMDevice8023Ethernet * self;
NMConnection * found;
} BestConnectionInfo;
static void
find_best_connection (gpointer data, gpointer user_data)
{
BestConnectionInfo * info = (BestConnectionInfo *) user_data;
NMConnection *connection = NM_CONNECTION (data);
NMSettingConnection * s_con;
NMSettingWired * s_wired;
if (info->found)
return;
s_con = (NMSettingConnection *) nm_connection_get_setting (connection, NM_TYPE_SETTING_CONNECTION);
2007-09-09 Dan Williams <dcbw@redhat.com> * introspection/nm-device.xml - The 'Activate' method now takes 3 arguments, a service name for the settings service (user or system), the object path of the connection to activate, and the specific object to activate, if any * src/nm-device-interface.c - (nm_device_interface_error_quark, nm_device_interface_error_get_type): Add error bits - (impl_device_activate): adapt to new Activate arguments; validate the service name and get the Connection object from the NMManager before starting to activate the device with the specified connection * src/nm-device-802-3-ethernet.c - (real_get_best_connection): find the best connection, or create a default one if no existing connections can be used * src/NetworkManagerPolicy.c - (nm_policy_auto_get_best_device): Get the device's best connection and only pick the device if it has one - (nm_policy_device_change_check): disable wireless bits for now until wireless get_best_connection() can be implemented (replacing "best_ap"); don't create a default connection here as the device subclass will do that if needed * src/nm-manager.h src/nm-manager.c - (nm_manager_get): make NMManager a singleton and expose the getter internally - Rework internal NMManager connection handling to use the same routines for both the system and user settings services. Most calls take a new NMConnectionType argument specifying either system or user connections - (nm_manager_get_connection_by_object_path): new function; get a connection keyed on its object path * src/NetworkManager.c - (main): use nm_manager_get() git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2776 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-09-09 22:18:42 +00:00
if (s_con == NULL)
return;
if (strcmp (s_con->type, NM_SETTING_WIRED_SETTING_NAME))
2007-09-09 Dan Williams <dcbw@redhat.com> * introspection/nm-device.xml - The 'Activate' method now takes 3 arguments, a service name for the settings service (user or system), the object path of the connection to activate, and the specific object to activate, if any * src/nm-device-interface.c - (nm_device_interface_error_quark, nm_device_interface_error_get_type): Add error bits - (impl_device_activate): adapt to new Activate arguments; validate the service name and get the Connection object from the NMManager before starting to activate the device with the specified connection * src/nm-device-802-3-ethernet.c - (real_get_best_connection): find the best connection, or create a default one if no existing connections can be used * src/NetworkManagerPolicy.c - (nm_policy_auto_get_best_device): Get the device's best connection and only pick the device if it has one - (nm_policy_device_change_check): disable wireless bits for now until wireless get_best_connection() can be implemented (replacing "best_ap"); don't create a default connection here as the device subclass will do that if needed * src/nm-manager.h src/nm-manager.c - (nm_manager_get): make NMManager a singleton and expose the getter internally - Rework internal NMManager connection handling to use the same routines for both the system and user settings services. Most calls take a new NMConnectionType argument specifying either system or user connections - (nm_manager_get_connection_by_object_path): new function; get a connection keyed on its object path * src/NetworkManager.c - (main): use nm_manager_get() git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2776 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-09-09 22:18:42 +00:00
return;
if (!s_con->autoconnect)
return;
s_wired = (NMSettingWired *) nm_connection_get_setting (connection, NM_TYPE_SETTING_WIRED);
2007-09-09 Dan Williams <dcbw@redhat.com> * introspection/nm-device.xml - The 'Activate' method now takes 3 arguments, a service name for the settings service (user or system), the object path of the connection to activate, and the specific object to activate, if any * src/nm-device-interface.c - (nm_device_interface_error_quark, nm_device_interface_error_get_type): Add error bits - (impl_device_activate): adapt to new Activate arguments; validate the service name and get the Connection object from the NMManager before starting to activate the device with the specified connection * src/nm-device-802-3-ethernet.c - (real_get_best_connection): find the best connection, or create a default one if no existing connections can be used * src/NetworkManagerPolicy.c - (nm_policy_auto_get_best_device): Get the device's best connection and only pick the device if it has one - (nm_policy_device_change_check): disable wireless bits for now until wireless get_best_connection() can be implemented (replacing "best_ap"); don't create a default connection here as the device subclass will do that if needed * src/nm-manager.h src/nm-manager.c - (nm_manager_get): make NMManager a singleton and expose the getter internally - Rework internal NMManager connection handling to use the same routines for both the system and user settings services. Most calls take a new NMConnectionType argument specifying either system or user connections - (nm_manager_get_connection_by_object_path): new function; get a connection keyed on its object path * src/NetworkManager.c - (main): use nm_manager_get() git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2776 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-09-09 22:18:42 +00:00
if (s_wired == NULL)
return;
info->found = connection;
}
static NMConnection *
2007-09-10 Dan Williams <dcbw@redhat.com> * include/NetworkManager.h - Kill NMNetworkType; AP types don't matter any more * src/NetworkManagerAPList.c src/NetworkManagerAPList.h src/Makefile.am - Kill; NMAccessPointList has outlived it's usefulness * src/NetworkManagerAP.c src/NetworkManagerAP.h - (match_cipher, security_compatible, nm_ap_check_compatible): new functions; check if an NMConnection object is compatible with the settings of this AP - (freq_to_channel, channel_to_freq): utility functions for channel <-> frequency conversion * src/nm-device.c src/nm-device.h - (nm_device_get_best_connection): pass the specific object around (which might be the object path of a specific AP to connect to). The get_best_connection() call should populate this on return if needed (wireless does). * src/nm-device-802-3-ethernet.c - (real_get_best_connection): handle specific_object argument * src/NetworkManager.c src/NetworkManagerMain.h - Remove unused includes * src/nm-device-802-11-wireless.c src/nm-device-802-11-wireless.h - Convert the ap_list into a GSList from an NMAccessPointList - No need for caching the 'activation_ap' since this is now determined from the specific_object of the activation request, which is populated from the get_best_connection() call or from a user request - (nm_device_802_11_wireless_update_bssid): fix warning - (get_wireless_capabilities): fix error message format arguments - (nm_device_802_11_wireless_copy_allowed_to_dev_list): remove, unused - (find_best_connection, real_get_best_connection): implement - (ap_list_get_ap_by_ssid, nm_device_802_11_wireless_ap_list_print): move here from NetworkManagerAPList - (ap_need_secrets): remove; moved to nm-connection.c where it belongs - (real_act_stage1_prepare): just ensure an AP exists, connection is already verified earlier - (real_act_stage2_config): use nm_connection_need_secrets() * src/NetworkManagerPolicy.c - (nm_policy_auto_get_best_device): handle specific objects - (create_connection): remove; automatic connection creation functionality is handled by the Connection objects - (nm_policy_device_change_check): handle specific_object * libnm-util/nm-connection.c - (wireless_sec_need_secrets, nm_connection_need_secrets): implement git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2778 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-09-10 19:11:40 +00:00
real_get_best_connection (NMDevice *dev,
2007-09-26 15:38:51 +00:00
GSList *connections,
2007-09-10 Dan Williams <dcbw@redhat.com> * include/NetworkManager.h - Kill NMNetworkType; AP types don't matter any more * src/NetworkManagerAPList.c src/NetworkManagerAPList.h src/Makefile.am - Kill; NMAccessPointList has outlived it's usefulness * src/NetworkManagerAP.c src/NetworkManagerAP.h - (match_cipher, security_compatible, nm_ap_check_compatible): new functions; check if an NMConnection object is compatible with the settings of this AP - (freq_to_channel, channel_to_freq): utility functions for channel <-> frequency conversion * src/nm-device.c src/nm-device.h - (nm_device_get_best_connection): pass the specific object around (which might be the object path of a specific AP to connect to). The get_best_connection() call should populate this on return if needed (wireless does). * src/nm-device-802-3-ethernet.c - (real_get_best_connection): handle specific_object argument * src/NetworkManager.c src/NetworkManagerMain.h - Remove unused includes * src/nm-device-802-11-wireless.c src/nm-device-802-11-wireless.h - Convert the ap_list into a GSList from an NMAccessPointList - No need for caching the 'activation_ap' since this is now determined from the specific_object of the activation request, which is populated from the get_best_connection() call or from a user request - (nm_device_802_11_wireless_update_bssid): fix warning - (get_wireless_capabilities): fix error message format arguments - (nm_device_802_11_wireless_copy_allowed_to_dev_list): remove, unused - (find_best_connection, real_get_best_connection): implement - (ap_list_get_ap_by_ssid, nm_device_802_11_wireless_ap_list_print): move here from NetworkManagerAPList - (ap_need_secrets): remove; moved to nm-connection.c where it belongs - (real_act_stage1_prepare): just ensure an AP exists, connection is already verified earlier - (real_act_stage2_config): use nm_connection_need_secrets() * src/NetworkManagerPolicy.c - (nm_policy_auto_get_best_device): handle specific objects - (create_connection): remove; automatic connection creation functionality is handled by the Connection objects - (nm_policy_device_change_check): handle specific_object * libnm-util/nm-connection.c - (wireless_sec_need_secrets, nm_connection_need_secrets): implement git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2778 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-09-10 19:11:40 +00:00
char **specific_object)
2007-09-09 Dan Williams <dcbw@redhat.com> * introspection/nm-device.xml - The 'Activate' method now takes 3 arguments, a service name for the settings service (user or system), the object path of the connection to activate, and the specific object to activate, if any * src/nm-device-interface.c - (nm_device_interface_error_quark, nm_device_interface_error_get_type): Add error bits - (impl_device_activate): adapt to new Activate arguments; validate the service name and get the Connection object from the NMManager before starting to activate the device with the specified connection * src/nm-device-802-3-ethernet.c - (real_get_best_connection): find the best connection, or create a default one if no existing connections can be used * src/NetworkManagerPolicy.c - (nm_policy_auto_get_best_device): Get the device's best connection and only pick the device if it has one - (nm_policy_device_change_check): disable wireless bits for now until wireless get_best_connection() can be implemented (replacing "best_ap"); don't create a default connection here as the device subclass will do that if needed * src/nm-manager.h src/nm-manager.c - (nm_manager_get): make NMManager a singleton and expose the getter internally - Rework internal NMManager connection handling to use the same routines for both the system and user settings services. Most calls take a new NMConnectionType argument specifying either system or user connections - (nm_manager_get_connection_by_object_path): new function; get a connection keyed on its object path * src/NetworkManager.c - (main): use nm_manager_get() git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2776 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-09-09 22:18:42 +00:00
{
NMDevice8023Ethernet * self = NM_DEVICE_802_3_ETHERNET (dev);
BestConnectionInfo find_info;
guint32 caps;
caps = nm_device_get_capabilities (dev);
/* FIXME: for now, non-carrier-detect devices don't have a best connection,
* the user needs to pick one. In the near-future, we want to instead
* honor the first 'autoconnect':True connection we find that applies
* to this device.
*/
if (!(caps & NM_DEVICE_CAP_CARRIER_DETECT))
return NULL;
memset (&find_info, 0, sizeof (BestConnectionInfo));
find_info.self = self;
g_slist_foreach (connections, find_best_connection, &find_info);
return find_info.found;
}
static void
nm_device_802_3_ethernet_dispose (GObject *object)
{
NMDevice8023EthernetPrivate *priv = NM_DEVICE_802_3_ETHERNET_GET_PRIVATE (object);
NMNetlinkMonitor *monitor;
if (priv->dispose_has_run) {
G_OBJECT_CLASS (nm_device_802_3_ethernet_parent_class)->dispose (object);
return;
}
priv->dispose_has_run = TRUE;
monitor = nm_netlink_monitor_get ();
if (priv->link_connected_id) {
g_signal_handler_disconnect (monitor, priv->link_connected_id);
priv->link_connected_id = 0;
}
if (priv->link_disconnected_id) {
g_signal_handler_disconnect (monitor, priv->link_disconnected_id);
priv->link_disconnected_id = 0;
}
g_object_unref (monitor);
G_OBJECT_CLASS (nm_device_802_3_ethernet_parent_class)->dispose (object);
}
static void
nm_device_802_3_ethernet_finalize (GObject *object)
{
NMDevice8023EthernetPrivate *priv = NM_DEVICE_802_3_ETHERNET_GET_PRIVATE (object);
g_free (priv->carrier_file_path);
G_OBJECT_CLASS (nm_device_802_3_ethernet_parent_class)->finalize (object);
}
static void
get_property (GObject *object, guint prop_id,
2007-11-28 Tambet Ingo <tambet@gmail.com> Merge the beginnings of the new GSM card support. * src/ppp-manager/nm-ppp-manager.c (nm_ppp_manager_stop): Remove * the ppp watch source before killing pppd - If this happens from g_object_unref() then the ppp manager is already destroyed by the time the watch callback runs. * src/nm-hal-manager.c: Add a device_type_name string to the * device creators, so that we can print a nice human readable string when a device is added. * src/nm-umts-device.c (automatic_registration_get_network): * Query for the activated network, not much is done with the result thought. * src/nm-serial-device.c (nm_serial_device_get_reply): * Implement. (ppp_ip4_config): Change the device state to activated here for now. (real_check_connection): Make sure the connection includes ppp setting. * libnm-glib/nm-client.c (get_device): Handle umts devices. * libnm-glib/Makefile.am: Add the new files to build. * libnm-glib/nm-umts-device.c: * libnm-glib/nm-umts-device.h: Implement. 2007-11-26 Tambet Ingo <tambet@gmail.com> * src/nm-umts-device.c (automatic_registration_get_network): For * now, dial immediately, nm_serial_device_get_reply() isn't implemented correctly yet. * src/nm-serial-device.c (wait_for_reply_info_destroy): Don't * try to remove the timeout source - this function is only called when the timeout source has been removed. (nm_serial_device_wait_for_reply): Allocate the duplicate responses array to be big enough to contain the terminating zero element as well. The timeout argument is meant to be in seconds now. (real_deactivate_quickly): Implement. * src/NetworkManager.conf: Allow root to own "org.freedesktop.NetworkManager.PPP", deny it for everybody else. * libnm-util/nm-setting-umts.c: Network type and band properties * are ints, (not unsigned ints). * libnm-util/nm-setting-serial.c (nm_setting_serial_class_init): * Fix a small issue with parity bounds - capital letters have lower ascii codes than lower case letters. * libnm-util/nm-connection.c (register_default_settings): * Register serial and umts settings. 2007-11-22 Tambet Ingo <tambet@gmail.com> Remove the "index" property from devices as not all device types have this. * include/NetworkManager.h (NM_DBUS_PATH_DEVICE): Remove. * src/nm-hal-manager.c (nm_get_device_index_from_hal): Remove. (wired_device_creator): Get the device interface from hal to create the device. (wireless_device_creator): Ditto. * src/nm-device.c (nm_device_init): Remove the index member. (constructor): Remove the checks for index property, make interface property a require constructor property. Use the HAL udi for DBus path for devices. (nm_device_get_index): Remove. (set_property): Remove index handling. (get_property): Ditto. (nm_device_get_dbus_path): Remove. * src/nm-device-interface.c (nm_device_interface_init): Remove * the index property. * src/nm-device-802-3-ethernet.c * (nm_device_802_3_ethernet_link_activated): Access the device index through it's interface. (nm_device_802_3_ethernet_link_deactivated): Ditto. (nm_device_802_3_ethernet_new): Remove the useless argument test_dev. Remove index argument. Add interface argument. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the useless test_dev argument. Remove index argument. Add interface arugment. * src/NetworkManagerSystem.c * (nm_system_device_set_from_ip4_config): Get the device index through interface. (nm_system_set_mtu): Ditto. * introspection/nm-device.xml: Remove the "Index" property. 2007-11-21 Tambet Ingo <tambet@gmail.com> * src/nm-serial-device.c: * src/nm-serial-device.c: * src/nm-umts-device.c: * src/nm-umts-device.h: Implement. * src/nm-hal-manager.c (nm_get_device_driver_name): * libhal_free_string the string allocated by libhal. (modem_device_creator): Implement. (register_built_in_creators): Register the modem creator. * src/nm-device-802-11-wireless.c * (nm_device_802_11_wireless_new): Remove the unused test_dev argument. * src/nm-device-802-3-ethernet.c (nm_device_802_3_ethernet_new): * Ditto. * src/Makefile.am: Add new files to build. Link in ppp-manager. * libnm-util/nm-setting-umts.c: * libnm-util/nm-setting-umts.h: * libnm-util/nm-setting-serial.c: * libnm-util/nm-setting-serial.h: Implement. * libnm-util/Makefile.am: Add new files to build. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3116 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-11-29 14:38:07 +00:00
GValue *value, GParamSpec *pspec)
{
NMDevice8023Ethernet *device = NM_DEVICE_802_3_ETHERNET (object);
struct ether_addr hw_addr;
char hw_addr_buf[20];
switch (prop_id) {
case PROP_HW_ADDRESS:
memset (hw_addr_buf, 0, 20);
nm_device_802_3_ethernet_get_address (device, &hw_addr);
iw_ether_ntop (&hw_addr, hw_addr_buf);
g_value_set_string (value, &hw_addr_buf[0]);
break;
case PROP_SPEED:
g_value_set_uint (value, nm_device_802_3_ethernet_get_speed (device));
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
nm_device_802_3_ethernet_class_init (NMDevice8023EthernetClass *klass)
{
GObjectClass *object_class = G_OBJECT_CLASS (klass);
NMDeviceClass *parent_class = NM_DEVICE_CLASS (klass);
g_type_class_add_private (object_class, sizeof (NMDevice8023EthernetPrivate));
/* virtual methods */
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
object_class->constructor = constructor;
object_class->dispose = nm_device_802_3_ethernet_dispose;
object_class->get_property = get_property;
object_class->finalize = nm_device_802_3_ethernet_finalize;
parent_class->get_generic_capabilities = real_get_generic_capabilities;
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
parent_class->is_up = real_is_up;
parent_class->bring_up = real_bring_up;
parent_class->bring_down = real_bring_down;
parent_class->update_link = real_update_link;
parent_class->can_interrupt_activation = real_can_interrupt_activation;
parent_class->set_hw_address = real_set_hw_address;
2007-09-09 Dan Williams <dcbw@redhat.com> * introspection/nm-device.xml - The 'Activate' method now takes 3 arguments, a service name for the settings service (user or system), the object path of the connection to activate, and the specific object to activate, if any * src/nm-device-interface.c - (nm_device_interface_error_quark, nm_device_interface_error_get_type): Add error bits - (impl_device_activate): adapt to new Activate arguments; validate the service name and get the Connection object from the NMManager before starting to activate the device with the specified connection * src/nm-device-802-3-ethernet.c - (real_get_best_connection): find the best connection, or create a default one if no existing connections can be used * src/NetworkManagerPolicy.c - (nm_policy_auto_get_best_device): Get the device's best connection and only pick the device if it has one - (nm_policy_device_change_check): disable wireless bits for now until wireless get_best_connection() can be implemented (replacing "best_ap"); don't create a default connection here as the device subclass will do that if needed * src/nm-manager.h src/nm-manager.c - (nm_manager_get): make NMManager a singleton and expose the getter internally - Rework internal NMManager connection handling to use the same routines for both the system and user settings services. Most calls take a new NMConnectionType argument specifying either system or user connections - (nm_manager_get_connection_by_object_path): new function; get a connection keyed on its object path * src/NetworkManager.c - (main): use nm_manager_get() git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2776 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-09-09 22:18:42 +00:00
parent_class->get_best_connection = real_get_best_connection;
/* properties */
g_object_class_install_property
(object_class, PROP_HW_ADDRESS,
g_param_spec_string (NM_DEVICE_802_3_ETHERNET_HW_ADDRESS,
"MAC Address",
"Hardware MAC address",
NULL,
G_PARAM_READABLE));
g_object_class_install_property
(object_class, PROP_SPEED,
g_param_spec_uint (NM_DEVICE_802_3_ETHERNET_SPEED,
"Speed",
"Speed",
0, G_MAXUINT32, 0,
G_PARAM_READABLE));
dbus_g_object_type_install_info (G_TYPE_FROM_CLASS (klass),
&dbus_glib_nm_device_802_3_ethernet_object_info);
}
2006-11-25 Dan Williams <dcbw@redhat.com> * src/supplicant-manager/nm-supplicant-types.h - new file; move all supplicant manager object typedefs here for #include sanity * src/supplicant-manager/nm-supplicant-interface.c src/supplicant-manager/nm-supplicant-interface.h - new file; an object that interfaces an NMDevice object to the supplicant and handles signals from the supplicant. This object does all necessary DBus communication with wpa_supplicant. * src/supplicant-manager/nm-supplicant-manager.c src/supplicant-manager/nm-supplicant-manager.h - Actually do something. Track the state of the wpa_supplicant service and deal with its comings & goings. Handle life events of supplicant interfaces too. - Move NMSupplicantManager typedef to nm-supplicant-types.h * src/supplicant-manager/nm-supplicant-connection.h - Move NMSupplicantConnection typedef to nm-supplicant-types.h * src/supplicant-manager/Makefile.am - Add new files to build, and add libnm-util to includes * src/nm-marshal.list - New marshaler type: VOID:UINT,UINT * src/nm-device-802-3-ethernet.c - (real_init): grab a supplicant interface - (nm_device_802_3_ethernet_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/nm-device-802-11-wireless.c - (real_init): grab a supplicant interface - (nm_device_802_11_wireless_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/NetworkManager.c - (main): create and keep the supplicant manager around for the lifetime of NetworkManager * src/Makefile.am - Link to the supplicant manager sub-library and use the supplicant manager includes git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2125 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-11-25 15:41:04 +00:00
/****************************************************************************
* WPA Supplicant control stuff
*
*/
static void
supplicant_iface_state_cb (NMSupplicantInterface * iface,
guint32 new_state,
guint32 old_state,
NMDevice8023Ethernet *self)
2006-11-25 Dan Williams <dcbw@redhat.com> * src/supplicant-manager/nm-supplicant-types.h - new file; move all supplicant manager object typedefs here for #include sanity * src/supplicant-manager/nm-supplicant-interface.c src/supplicant-manager/nm-supplicant-interface.h - new file; an object that interfaces an NMDevice object to the supplicant and handles signals from the supplicant. This object does all necessary DBus communication with wpa_supplicant. * src/supplicant-manager/nm-supplicant-manager.c src/supplicant-manager/nm-supplicant-manager.h - Actually do something. Track the state of the wpa_supplicant service and deal with its comings & goings. Handle life events of supplicant interfaces too. - Move NMSupplicantManager typedef to nm-supplicant-types.h * src/supplicant-manager/nm-supplicant-connection.h - Move NMSupplicantConnection typedef to nm-supplicant-types.h * src/supplicant-manager/Makefile.am - Add new files to build, and add libnm-util to includes * src/nm-marshal.list - New marshaler type: VOID:UINT,UINT * src/nm-device-802-3-ethernet.c - (real_init): grab a supplicant interface - (nm_device_802_3_ethernet_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/nm-device-802-11-wireless.c - (real_init): grab a supplicant interface - (nm_device_802_11_wireless_dispose): release the supplicant interface - (supplicant_iface_state_cb): new function, stub for handling supplicant interface state changes * src/NetworkManager.c - (main): create and keep the supplicant manager around for the lifetime of NetworkManager * src/Makefile.am - Link to the supplicant manager sub-library and use the supplicant manager includes git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2125 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-11-25 15:41:04 +00:00
{
g_return_if_fail (self != NULL);
nm_info ("(%s) supplicant interface is now in state %d (from %d).",
nm_device_get_iface (NM_DEVICE (self)),
new_state,
old_state);
}
/**************************************/
/* Ethtool capability detection */
/**************************************/
#include <linux/sockios.h>
#include <linux/ethtool.h>
static gboolean
supports_ethtool_carrier_detect (NMDevice8023Ethernet *self)
{
NMSock * sk;
struct ifreq ifr;
gboolean supports_ethtool = FALSE;
struct ethtool_cmd edata;
const char * iface;
g_return_val_if_fail (self != NULL, FALSE);
iface = nm_device_get_iface (NM_DEVICE (self));
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
if ((sk = nm_dev_sock_open (iface, DEV_GENERAL, __func__, NULL)) == NULL)
{
2006-03-02 Robert Love <rml@novell.com> Add support for retrieving both the per-device speed and the per-network maximum supported rate. Then change the getProperties DBUS API for both networks and devices to report this informaiton. Finally, display the information via both nm-applet and nm-tool: * gnome/applet/applet-dbus-devices.c: Grab the speed from getProperties and set it. * gnome/applet/applet.c: Display the device's speed in the 'Connection Information' dialog. * gnome/applet/applet.glade: Update the UI to show per-device speed. * gnome/applet/nm-device.c, gnome/applet/nm-device.h: Add interfaces network_device_get_speed() and network_device_set_speed() for retrieving and setting, respectively, a network device's current speed. * src/nm-dbus-device.c: Send the device's speed on getProperties. * src/nm-device-802-11-wireless.c: Return the rate in Mb/s, not Kb/s, in the function nm_device_802_11_wireless_get_bitrate() -- it does not matter (yet) what the units are, because we only feed it its own output. Implement SIOCGIRATE and set the per-network maximum supported rate during scanning. * src/nm-device-802-11-wireless.h: Export the function nm_device_802_11_wireless_get_bitrate(). * src/nm-device-802-3-ethernet.c, src/nm-device-802-3-ethernet.h: Add function nm_device_802_3_ethernet_get_speed() for returning an 802.3's current speed, in Mb/s. * test/nm-tool.c: Display the per-device current speed, if available, and the per-network maximum rate. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-03-02 23:01:33 +00:00
nm_warning ("cannot open socket on interface %s for ethtool detect: %s",
iface, strerror (errno));
return FALSE;
}
strncpy (ifr.ifr_name, iface, sizeof(ifr.ifr_name) - 1);
edata.cmd = ETHTOOL_GLINK;
ifr.ifr_data = (char *) &edata;
nm_ioctl_info ("%s: About to ETHTOOL\n", iface);
if (ioctl (nm_dev_sock_get_fd (sk), SIOCETHTOOL, &ifr) == -1)
goto out;
supports_ethtool = TRUE;
out:
nm_ioctl_info ("%s: Done with ETHTOOL\n", iface);
nm_dev_sock_close (sk);
return supports_ethtool;
}
/* Returns speed in Mb/s */
static guint32
2006-03-02 Robert Love <rml@novell.com> Add support for retrieving both the per-device speed and the per-network maximum supported rate. Then change the getProperties DBUS API for both networks and devices to report this informaiton. Finally, display the information via both nm-applet and nm-tool: * gnome/applet/applet-dbus-devices.c: Grab the speed from getProperties and set it. * gnome/applet/applet.c: Display the device's speed in the 'Connection Information' dialog. * gnome/applet/applet.glade: Update the UI to show per-device speed. * gnome/applet/nm-device.c, gnome/applet/nm-device.h: Add interfaces network_device_get_speed() and network_device_set_speed() for retrieving and setting, respectively, a network device's current speed. * src/nm-dbus-device.c: Send the device's speed on getProperties. * src/nm-device-802-11-wireless.c: Return the rate in Mb/s, not Kb/s, in the function nm_device_802_11_wireless_get_bitrate() -- it does not matter (yet) what the units are, because we only feed it its own output. Implement SIOCGIRATE and set the per-network maximum supported rate during scanning. * src/nm-device-802-11-wireless.h: Export the function nm_device_802_11_wireless_get_bitrate(). * src/nm-device-802-3-ethernet.c, src/nm-device-802-3-ethernet.h: Add function nm_device_802_3_ethernet_get_speed() for returning an 802.3's current speed, in Mb/s. * test/nm-tool.c: Display the per-device current speed, if available, and the per-network maximum rate. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-03-02 23:01:33 +00:00
nm_device_802_3_ethernet_get_speed (NMDevice8023Ethernet *self)
{
NMSock * sk;
struct ifreq ifr;
struct ethtool_cmd edata;
const char * iface;
guint32 speed = 0;
2006-03-02 Robert Love <rml@novell.com> Add support for retrieving both the per-device speed and the per-network maximum supported rate. Then change the getProperties DBUS API for both networks and devices to report this informaiton. Finally, display the information via both nm-applet and nm-tool: * gnome/applet/applet-dbus-devices.c: Grab the speed from getProperties and set it. * gnome/applet/applet.c: Display the device's speed in the 'Connection Information' dialog. * gnome/applet/applet.glade: Update the UI to show per-device speed. * gnome/applet/nm-device.c, gnome/applet/nm-device.h: Add interfaces network_device_get_speed() and network_device_set_speed() for retrieving and setting, respectively, a network device's current speed. * src/nm-dbus-device.c: Send the device's speed on getProperties. * src/nm-device-802-11-wireless.c: Return the rate in Mb/s, not Kb/s, in the function nm_device_802_11_wireless_get_bitrate() -- it does not matter (yet) what the units are, because we only feed it its own output. Implement SIOCGIRATE and set the per-network maximum supported rate during scanning. * src/nm-device-802-11-wireless.h: Export the function nm_device_802_11_wireless_get_bitrate(). * src/nm-device-802-3-ethernet.c, src/nm-device-802-3-ethernet.h: Add function nm_device_802_3_ethernet_get_speed() for returning an 802.3's current speed, in Mb/s. * test/nm-tool.c: Display the per-device current speed, if available, and the per-network maximum rate. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-03-02 23:01:33 +00:00
g_return_val_if_fail (self != NULL, FALSE);
iface = nm_device_get_iface (NM_DEVICE (self));
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
if ((sk = nm_dev_sock_open (iface, DEV_GENERAL, __func__, NULL)) == NULL)
2006-03-02 Robert Love <rml@novell.com> Add support for retrieving both the per-device speed and the per-network maximum supported rate. Then change the getProperties DBUS API for both networks and devices to report this informaiton. Finally, display the information via both nm-applet and nm-tool: * gnome/applet/applet-dbus-devices.c: Grab the speed from getProperties and set it. * gnome/applet/applet.c: Display the device's speed in the 'Connection Information' dialog. * gnome/applet/applet.glade: Update the UI to show per-device speed. * gnome/applet/nm-device.c, gnome/applet/nm-device.h: Add interfaces network_device_get_speed() and network_device_set_speed() for retrieving and setting, respectively, a network device's current speed. * src/nm-dbus-device.c: Send the device's speed on getProperties. * src/nm-device-802-11-wireless.c: Return the rate in Mb/s, not Kb/s, in the function nm_device_802_11_wireless_get_bitrate() -- it does not matter (yet) what the units are, because we only feed it its own output. Implement SIOCGIRATE and set the per-network maximum supported rate during scanning. * src/nm-device-802-11-wireless.h: Export the function nm_device_802_11_wireless_get_bitrate(). * src/nm-device-802-3-ethernet.c, src/nm-device-802-3-ethernet.h: Add function nm_device_802_3_ethernet_get_speed() for returning an 802.3's current speed, in Mb/s. * test/nm-tool.c: Display the per-device current speed, if available, and the per-network maximum rate. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-03-02 23:01:33 +00:00
{
nm_warning ("cannot open socket on interface %s for ethtool: %s",
iface, strerror (errno));
return FALSE;
}
strncpy (ifr.ifr_name, iface, sizeof (ifr.ifr_name) - 1);
edata.cmd = ETHTOOL_GSET;
ifr.ifr_data = (char *) &edata;
if (ioctl (nm_dev_sock_get_fd (sk), SIOCETHTOOL, &ifr) == -1)
goto out;
speed = edata.speed > 0 ? (guint32) edata.speed : 0;
2006-03-02 Robert Love <rml@novell.com> Add support for retrieving both the per-device speed and the per-network maximum supported rate. Then change the getProperties DBUS API for both networks and devices to report this informaiton. Finally, display the information via both nm-applet and nm-tool: * gnome/applet/applet-dbus-devices.c: Grab the speed from getProperties and set it. * gnome/applet/applet.c: Display the device's speed in the 'Connection Information' dialog. * gnome/applet/applet.glade: Update the UI to show per-device speed. * gnome/applet/nm-device.c, gnome/applet/nm-device.h: Add interfaces network_device_get_speed() and network_device_set_speed() for retrieving and setting, respectively, a network device's current speed. * src/nm-dbus-device.c: Send the device's speed on getProperties. * src/nm-device-802-11-wireless.c: Return the rate in Mb/s, not Kb/s, in the function nm_device_802_11_wireless_get_bitrate() -- it does not matter (yet) what the units are, because we only feed it its own output. Implement SIOCGIRATE and set the per-network maximum supported rate during scanning. * src/nm-device-802-11-wireless.h: Export the function nm_device_802_11_wireless_get_bitrate(). * src/nm-device-802-3-ethernet.c, src/nm-device-802-3-ethernet.h: Add function nm_device_802_3_ethernet_get_speed() for returning an 802.3's current speed, in Mb/s. * test/nm-tool.c: Display the per-device current speed, if available, and the per-network maximum rate. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@1540 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2006-03-02 23:01:33 +00:00
out:
nm_dev_sock_close (sk);
return speed;
}
/**************************************/
/* MII capability detection */
/**************************************/
#define _LINUX_IF_H
#include <linux/mii.h>
#undef _LINUX_IF_H
static int
mdio_read (NMDevice8023Ethernet *self, NMSock *sk, struct ifreq *ifr, int location)
{
struct mii_ioctl_data *mii;
int val = -1;
const char * iface;
g_return_val_if_fail (sk != NULL, -1);
g_return_val_if_fail (ifr != NULL, -1);
iface = nm_device_get_iface (NM_DEVICE (self));
mii = (struct mii_ioctl_data *) &ifr->ifr_ifru;
mii->reg_num = location;
nm_ioctl_info ("%s: About to GET MIIREG\n", iface);
if (ioctl (nm_dev_sock_get_fd (sk), SIOCGMIIREG, ifr) >= 0)
val = mii->val_out;
nm_ioctl_info ("%s: Done with GET MIIREG\n", iface);
return val;
}
static gboolean
supports_mii_carrier_detect (NMDevice8023Ethernet *self)
{
NMSock * sk;
struct ifreq ifr;
int bmsr;
gboolean supports_mii = FALSE;
int err;
const char * iface;
g_return_val_if_fail (self != NULL, FALSE);
iface = nm_device_get_iface (NM_DEVICE (self));
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
if ((sk = nm_dev_sock_open (iface, DEV_GENERAL, __FUNCTION__, NULL)) == NULL)
{
nm_warning ("cannot open socket on interface %s for MII detect; errno=%d",
iface, errno);
return FALSE;
}
strncpy (ifr.ifr_name, iface, sizeof (ifr.ifr_name) - 1);
nm_ioctl_info ("%s: About to GET MIIPHY\n", iface);
err = ioctl (nm_dev_sock_get_fd (sk), SIOCGMIIPHY, &ifr);
nm_ioctl_info ("%s: Done with GET MIIPHY\n", iface);
if (err < 0)
goto out;
/* If we can read the BMSR register, we assume that the card supports MII link detection */
bmsr = mdio_read (self, sk, &ifr, MII_BMSR);
supports_mii = (bmsr != -1) ? TRUE : FALSE;
out:
nm_dev_sock_close (sk);
return supports_mii;
}