NetworkManager/libnm-core/nm-setting-ip4-config.c

488 lines
16 KiB
C
Raw Normal View History

/* -*- Mode: C; tab-width: 4; indent-tabs-mode: t; c-basic-offset: 4 -*- */
/*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301 USA.
*
* Copyright 2014 Red Hat, Inc.
*/
#include <string.h>
#include <glib/gi18n.h>
#include "nm-setting-ip4-config.h"
#include "nm-setting-private.h"
/**
* SECTION:nm-setting-ip4-config
* @short_description: Describes IPv4 addressing, routing, and name service properties
*
* The #NMSettingIP4Config object is a #NMSetting subclass that describes
* properties related to IPv4 addressing, routing, and Domain Name Service.
*
* #NMSettingIP4Config has few properties or methods of its own; it inherits
* almost everything from #NMSettingIPConfig.
*
* NetworkManager supports 5 values for the #NMSettingIPConfig:method property
* for IPv4. If "auto" is specified then the appropriate automatic method
* (DHCP, PPP, etc) is used for the interface and most other properties can be
* left unset. If "link-local" is specified, then a link-local address in the
* 169.254/16 range will be assigned to the interface. If "manual" is
* specified, static IP addressing is used and at least one IP address must be
* given in the "addresses" property. If "shared" is specified (indicating that
* this connection will provide network access to other computers) then the
* interface is assigned an address in the 10.42.x.1/24 range and a DHCP and
* forwarding DNS server are started, and the interface is NAT-ed to the current
* default network connection. "disabled" means IPv4 will not be used on this
* connection.
**/
G_DEFINE_TYPE_WITH_CODE (NMSettingIP4Config, nm_setting_ip4_config, NM_TYPE_SETTING_IP_CONFIG,
_nm_register_setting (IP4_CONFIG, 4))
NM_SETTING_REGISTER_TYPE (NM_TYPE_SETTING_IP4_CONFIG)
#define NM_SETTING_IP4_CONFIG_GET_PRIVATE(o) (G_TYPE_INSTANCE_GET_PRIVATE ((o), NM_TYPE_SETTING_IP4_CONFIG, NMSettingIP4ConfigPrivate))
typedef struct {
char *dhcp_client_id;
} NMSettingIP4ConfigPrivate;
enum {
PROP_0,
PROP_DHCP_CLIENT_ID,
LAST_PROP
};
/**
* nm_setting_ip4_config_new:
*
* Creates a new #NMSettingIP4Config object with default values.
*
* Returns: (transfer full): the new empty #NMSettingIP4Config object
**/
NMSetting *
nm_setting_ip4_config_new (void)
{
return (NMSetting *) g_object_new (NM_TYPE_SETTING_IP4_CONFIG, NULL);
}
/**
* nm_setting_ip4_config_get_dhcp_client_id:
* @setting: the #NMSettingIP4Config
*
* Returns the value contained in the #NMSettingIP4Config:dhcp-client-id
* property.
*
* Returns: the configured Client ID to send to the DHCP server when requesting
* addresses via DHCP.
**/
const char *
nm_setting_ip4_config_get_dhcp_client_id (NMSettingIP4Config *setting)
{
g_return_val_if_fail (NM_IS_SETTING_IP4_CONFIG (setting), NULL);
return NM_SETTING_IP4_CONFIG_GET_PRIVATE (setting)->dhcp_client_id;
}
static gboolean
verify (NMSetting *setting, NMConnection *connection, GError **error)
{
NMSettingIP4ConfigPrivate *priv = NM_SETTING_IP4_CONFIG_GET_PRIVATE (setting);
NMSettingIPConfig *s_ip = NM_SETTING_IP_CONFIG (setting);
NMSettingVerifyResult ret;
const char *method;
ret = NM_SETTING_CLASS (nm_setting_ip4_config_parent_class)->verify (setting, connection, error);
if (ret != NM_SETTING_VERIFY_SUCCESS)
return ret;
method = nm_setting_ip_config_get_method (s_ip);
/* Base class already checked that it exists */
g_assert (method);
if (!strcmp (method, NM_SETTING_IP4_CONFIG_METHOD_MANUAL)) {
if (nm_setting_ip_config_get_num_addresses (s_ip) == 0) {
g_set_error (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_MISSING_PROPERTY,
_("this property cannot be empty for '%s=%s'"),
NM_SETTING_IP_CONFIG_METHOD, method);
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP4_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_ADDRESSES);
return FALSE;
}
} else if ( !strcmp (method, NM_SETTING_IP4_CONFIG_METHOD_LINK_LOCAL)
|| !strcmp (method, NM_SETTING_IP4_CONFIG_METHOD_SHARED)
|| !strcmp (method, NM_SETTING_IP4_CONFIG_METHOD_DISABLED)) {
if (nm_setting_ip_config_get_num_dns (s_ip) > 0) {
g_set_error (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_INVALID_PROPERTY,
_("this property is not allowed for '%s=%s'"),
NM_SETTING_IP_CONFIG_METHOD, method);
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP4_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_DNS);
return FALSE;
}
if (nm_setting_ip_config_get_num_dns_searches (s_ip) > 0) {
g_set_error (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_INVALID_PROPERTY,
_("this property is not allowed for '%s=%s'"),
NM_SETTING_IP_CONFIG_METHOD, method);
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP4_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_DNS_SEARCH);
return FALSE;
}
/* Shared allows IP addresses; link-local and disabled do not */
if (strcmp (method, NM_SETTING_IP4_CONFIG_METHOD_SHARED) != 0) {
if (nm_setting_ip_config_get_num_addresses (s_ip) > 0) {
g_set_error (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_INVALID_PROPERTY,
_("this property is not allowed for '%s=%s'"),
NM_SETTING_IP_CONFIG_METHOD, method);
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP4_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_ADDRESSES);
return FALSE;
}
}
} else if (!strcmp (method, NM_SETTING_IP4_CONFIG_METHOD_AUTO)) {
/* nothing to do */
} else {
g_set_error_literal (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_INVALID_PROPERTY,
_("property is invalid"));
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP4_CONFIG_SETTING_NAME, NM_SETTING_IP_CONFIG_METHOD);
return FALSE;
}
if (priv->dhcp_client_id && !strlen (priv->dhcp_client_id)) {
g_set_error_literal (error,
libnm-core: merge NMSetting*Error into NMConnectionError Each setting type was defining its own error type, but most of them had exactly the same three errors ("unknown", "missing property", and "invalid property"), and none of the other values was of much use programmatically anyway. So, this commit merges NMSettingError, NMSettingAdslError, etc, all into NMConnectionError. (The reason for merging into NMConnectionError rather than NMSettingError is that we also already have "NMSettingsError", for errors related to the settings service, so "NMConnectionError" is a less-confusable name for settings/connection errors than "NMSettingError".) Also, make sure that all of the affected error messages are localized, and (where appropriate) prefix them with the relevant property name. Renamed error codes: NM_SETTING_ERROR_PROPERTY_NOT_FOUND -> NM_CONNECTION_ERROR_PROPERTY_NOT_FOUND NM_SETTING_ERROR_PROPERTY_NOT_SECRET -> NM_CONNECTION_ERROR_PROPERTY_NOT_SECRET Remapped error codes: NM_SETTING_*_ERROR_MISSING_PROPERTY -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_*_ERROR_INVALID_PROPERTY -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_ERROR_PROPERTY_TYPE_MISMATCH -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BLUETOOTH_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_INVALID_SETTING NM_SETTING_BOND_ERROR_INVALID_OPTION -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_BOND_ERROR_MISSING_OPTION -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_CONNECTION_ERROR_TYPE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_CONNECTION_ERROR_SLAVE_SETTING_NOT_FOUND -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_IP4_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_IP6_CONFIG_ERROR_NOT_ALLOWED_FOR_METHOD -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_VLAN_ERROR_INVALID_PARENT -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_MISSING_802_1X_SETTING -> NM_CONNECTION_ERROR_MISSING_SETTING NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_802_1X -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_LEAP_REQUIRES_USERNAME -> NM_CONNECTION_ERROR_MISSING_PROPERTY NM_SETTING_WIRELESS_SECURITY_ERROR_SHARED_KEY_REQUIRES_WEP -> NM_CONNECTION_ERROR_INVALID_PROPERTY NM_SETTING_WIRELESS_ERROR_CHANNEL_REQUIRES_BAND -> NM_CONNECTION_ERROR_MISSING_PROPERTY Dropped error codes (were previously defined but unused): NM_SETTING_CDMA_ERROR_MISSING_SERIAL_SETTING NM_SETTING_CONNECTION_ERROR_IP_CONFIG_NOT_ALLOWED NM_SETTING_GSM_ERROR_MISSING_SERIAL_SETTING NM_SETTING_PPP_ERROR_REQUIRE_MPPE_NOT_ALLOWED NM_SETTING_PPPOE_ERROR_MISSING_PPP_SETTING NM_SETTING_SERIAL_ERROR_MISSING_PPP_SETTING NM_SETTING_WIRELESS_ERROR_MISSING_SECURITY_SETTING
2014-10-20 13:52:23 -04:00
NM_CONNECTION_ERROR,
NM_CONNECTION_ERROR_INVALID_PROPERTY,
_("property is empty"));
g_prefix_error (error, "%s.%s: ", NM_SETTING_IP4_CONFIG_SETTING_NAME, NM_SETTING_IP4_CONFIG_DHCP_CLIENT_ID);
return FALSE;
}
return TRUE;
}
static void
nm_setting_ip4_config_init (NMSettingIP4Config *setting)
{
}
static void
finalize (GObject *object)
{
NMSettingIP4ConfigPrivate *priv = NM_SETTING_IP4_CONFIG_GET_PRIVATE (object);
g_free (priv->dhcp_client_id);
G_OBJECT_CLASS (nm_setting_ip4_config_parent_class)->finalize (object);
}
static void
set_property (GObject *object, guint prop_id,
const GValue *value, GParamSpec *pspec)
{
NMSettingIP4ConfigPrivate *priv = NM_SETTING_IP4_CONFIG_GET_PRIVATE (object);
switch (prop_id) {
case PROP_DHCP_CLIENT_ID:
g_free (priv->dhcp_client_id);
priv->dhcp_client_id = g_value_dup_string (value);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
get_property (GObject *object, guint prop_id,
GValue *value, GParamSpec *pspec)
{
NMSettingIP4Config *s_ip4 = NM_SETTING_IP4_CONFIG (object);
switch (prop_id) {
case PROP_DHCP_CLIENT_ID:
g_value_set_string (value, nm_setting_ip4_config_get_dhcp_client_id (s_ip4));
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static GVariant *
ip4_dns_to_dbus (const GValue *prop_value)
{
return nm_utils_ip4_dns_to_variant (g_value_get_boxed (prop_value));
}
static void
ip4_dns_from_dbus (GVariant *dbus_value,
GValue *prop_value)
{
g_value_take_boxed (prop_value, nm_utils_ip4_dns_from_variant (dbus_value));
}
static GVariant *
ip4_addresses_get (NMSetting *setting,
const char *property)
{
GPtrArray *addrs;
const char *gateway;
GVariant *ret;
g_object_get (setting, property, &addrs, NULL);
gateway = nm_setting_ip_config_get_gateway (NM_SETTING_IP_CONFIG (setting));
ret = nm_utils_ip4_addresses_to_variant (addrs, gateway);
g_ptr_array_unref (addrs);
return ret;
}
static void
ip4_addresses_set (NMSetting *setting,
GVariant *connection_dict,
const char *property,
GVariant *value)
{
GPtrArray *addrs;
GVariant *s_ip4;
char **labels, *gateway = NULL;
int i;
s_ip4 = g_variant_lookup_value (connection_dict, NM_SETTING_IP4_CONFIG_SETTING_NAME, NM_VARIANT_TYPE_SETTING);
/* If 'address-data' is set then ignore 'addresses' */
if (g_variant_lookup (s_ip4, "address-data", "aa{sv}", NULL)) {
g_variant_unref (s_ip4);
return;
}
addrs = nm_utils_ip4_addresses_from_variant (value, &gateway);
if (g_variant_lookup (s_ip4, "address-labels", "^as", &labels)) {
for (i = 0; i < addrs->len && labels[i]; i++)
if (*labels[i])
nm_ip_address_set_attribute (addrs->pdata[i], "label", g_variant_new_string (labels[i]));
g_strfreev (labels);
}
if (gateway && !g_variant_lookup (s_ip4, "gateway", "s", NULL)) {
g_object_set (setting,
NM_SETTING_IP_CONFIG_GATEWAY, gateway,
NULL);
}
g_free (gateway);
g_variant_unref (s_ip4);
g_object_set (setting, property, addrs, NULL);
g_ptr_array_unref (addrs);
}
static GVariant *
ip4_address_labels_get (NMSetting *setting,
NMConnection *connection,
const char *property)
{
NMSettingIPConfig *s_ip = NM_SETTING_IP_CONFIG (setting);
GPtrArray *labels;
GVariant *ret;
int num_addrs, i;
labels = g_ptr_array_new ();
num_addrs = nm_setting_ip_config_get_num_addresses (s_ip);
for (i = 0; i < num_addrs; i++) {
NMIPAddress *addr = nm_setting_ip_config_get_address (s_ip, i);
GVariant *label = nm_ip_address_get_attribute (addr, "label");
g_ptr_array_add (labels, (char *) (label ? g_variant_get_string (label, NULL) : ""));
}
ret = g_variant_new_strv ((const char * const *) labels->pdata, labels->len);
g_ptr_array_unref (labels);
return ret;
}
static GVariant *
ip4_address_data_get (NMSetting *setting,
NMConnection *connection,
const char *property)
{
GPtrArray *addrs;
GVariant *ret;
g_object_get (setting, NM_SETTING_IP_CONFIG_ADDRESSES, &addrs, NULL);
ret = nm_utils_ip_addresses_to_variant (addrs);
g_ptr_array_unref (addrs);
return ret;
}
static void
ip4_address_data_set (NMSetting *setting,
GVariant *connection_dict,
const char *property,
GVariant *value)
{
GPtrArray *addrs;
addrs = nm_utils_ip_addresses_from_variant (value, AF_INET);
g_object_set (setting, NM_SETTING_IP_CONFIG_ADDRESSES, addrs, NULL);
g_ptr_array_unref (addrs);
}
static GVariant *
ip4_routes_get (NMSetting *setting,
const char *property)
{
GPtrArray *routes;
GVariant *ret;
g_object_get (setting, property, &routes, NULL);
ret = nm_utils_ip4_routes_to_variant (routes);
g_ptr_array_unref (routes);
return ret;
}
static void
ip4_routes_set (NMSetting *setting,
GVariant *connection_dict,
const char *property,
GVariant *value)
{
GPtrArray *routes;
GVariant *s_ip4;
s_ip4 = g_variant_lookup_value (connection_dict, NM_SETTING_IP4_CONFIG_SETTING_NAME, NM_VARIANT_TYPE_SETTING);
/* If 'route-data' is set then ignore 'routes' */
if (g_variant_lookup (s_ip4, "route-data", "aa{sv}", NULL)) {
g_variant_unref (s_ip4);
return;
}
g_variant_unref (s_ip4);
routes = nm_utils_ip4_routes_from_variant (value);
g_object_set (setting, property, routes, NULL);
g_ptr_array_unref (routes);
}
static GVariant *
ip4_route_data_get (NMSetting *setting,
NMConnection *connection,
const char *property)
{
GPtrArray *routes;
GVariant *ret;
g_object_get (setting, NM_SETTING_IP_CONFIG_ROUTES, &routes, NULL);
ret = nm_utils_ip_routes_to_variant (routes);
g_ptr_array_unref (routes);
return ret;
}
static void
ip4_route_data_set (NMSetting *setting,
GVariant *connection_dict,
const char *property,
GVariant *value)
{
GPtrArray *routes;
routes = nm_utils_ip_routes_from_variant (value, AF_INET);
g_object_set (setting, NM_SETTING_IP_CONFIG_ROUTES, routes, NULL);
g_ptr_array_unref (routes);
}
static void
nm_setting_ip4_config_class_init (NMSettingIP4ConfigClass *ip4_class)
{
NMSettingClass *setting_class = NM_SETTING_CLASS (ip4_class);
GObjectClass *object_class = G_OBJECT_CLASS (ip4_class);
g_type_class_add_private (setting_class, sizeof (NMSettingIP4ConfigPrivate));
/* virtual methods */
object_class->set_property = set_property;
object_class->get_property = get_property;
object_class->finalize = finalize;
setting_class->verify = verify;
/* properties */
/**
* NMSettingIP4Config:dhcp-client-id:
*
* A string sent to the DHCP server to identify the local machine which the
* DHCP server may use to customize the DHCP lease and options.
**/
g_object_class_install_property
(object_class, PROP_DHCP_CLIENT_ID,
g_param_spec_string (NM_SETTING_IP4_CONFIG_DHCP_CLIENT_ID, "", "",
NULL,
G_PARAM_READWRITE |
G_PARAM_STATIC_STRINGS));
/* IP4-specific property overrides */
_nm_setting_class_transform_property (setting_class,
NM_SETTING_IP_CONFIG_DNS,
G_VARIANT_TYPE ("au"),
ip4_dns_to_dbus,
ip4_dns_from_dbus);
_nm_setting_class_override_property (setting_class,
NM_SETTING_IP_CONFIG_ADDRESSES,
G_VARIANT_TYPE ("aau"),
ip4_addresses_get,
ip4_addresses_set,
NULL);
_nm_setting_class_add_dbus_only_property (setting_class,
"address-labels",
G_VARIANT_TYPE_STRING_ARRAY,
ip4_address_labels_get,
NULL);
_nm_setting_class_add_dbus_only_property (setting_class,
"address-data",
G_VARIANT_TYPE ("aa{sv}"),
ip4_address_data_get,
ip4_address_data_set);
_nm_setting_class_override_property (setting_class,
NM_SETTING_IP_CONFIG_ROUTES,
G_VARIANT_TYPE ("aau"),
ip4_routes_get,
ip4_routes_set,
NULL);
_nm_setting_class_add_dbus_only_property (setting_class,
"route-data",
G_VARIANT_TYPE ("aa{sv}"),
ip4_route_data_get,
ip4_route_data_set);
}