NetworkManager/libnm-glib/nm-access-point.c

507 lines
13 KiB
C
Raw Normal View History

#include <iwlib.h>
#include "nm-access-point.h"
#include "NetworkManager.h"
#include "nm-access-point-bindings.h"
2007-06-21 Tambet Ingo <tambet@ximian.com> * libnm-glib/Makefile.am: Add NMObject to build, remove nm-utils.[ch]. * nm-utils.[ch]: Remove. * libnm-glib/nm-object.c: Implement a base class for all libnm-glib dbus-aware objects for easy property access and dbus connection handling. * libnm-glib/nm-client.c: Derive from NMObject. * libnm-glib/nm-device.c: Ditto. * libnm-glib/nm-device-802-3-ethernet.c: Changes for being based on NMObject. * libnm-glib/nm-device-802-11-wireless.c: Ditto. * libnm-glib/nm-ip4-config.c: Ditto. * libnm-glib/nm-access-point.c: Ditto. * libnm-util/nm-connection.c (nm_connection_compare): Add a stub for connection comparision. Currently used by the device activation code to determine if the new activation is the same as the old one. * src/nm-dbus-nmi.c (nm_dbus_get_user_key_for_network): Don't use the obsolete and wrong way of getting the dbus path for AP. Fixes the issue where the applet isn't able to ask password for the AP. * src/nm-device.c (nm_device_activate): Change the logic here - instead of giving up if the device is already connected, tear down it's connection (if it isn't the same as new one) and start the activation. * src/nm-manager.c: Add the beginnings of NMConnection storage and signals. * src/NetworkManagerAP.c (nm_ap_init): Set the default values to AP memebers, fixes the issue where all APs are always listed as encrypted. * src/NetworkManagerDbus.c (nm_dbus_get_object_path_for_network): Remove. APs have their own registered paths. * test/nm-tool.c (detail_device): Don't try to get active network from wireless device if it's not connected - dbus-glib will happily crash trying to marshal NULL. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2615 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-06-22 15:09:02 +00:00
G_DEFINE_TYPE (NMAccessPoint, nm_access_point, NM_TYPE_OBJECT)
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
#define NM_ACCESS_POINT_GET_PRIVATE(o) (G_TYPE_INSTANCE_GET_PRIVATE ((o), NM_TYPE_ACCESS_POINT, NMAccessPointPrivate))
typedef struct {
gboolean disposed;
2007-06-21 Tambet Ingo <tambet@ximian.com> * libnm-glib/Makefile.am: Add NMObject to build, remove nm-utils.[ch]. * nm-utils.[ch]: Remove. * libnm-glib/nm-object.c: Implement a base class for all libnm-glib dbus-aware objects for easy property access and dbus connection handling. * libnm-glib/nm-client.c: Derive from NMObject. * libnm-glib/nm-device.c: Ditto. * libnm-glib/nm-device-802-3-ethernet.c: Changes for being based on NMObject. * libnm-glib/nm-device-802-11-wireless.c: Ditto. * libnm-glib/nm-ip4-config.c: Ditto. * libnm-glib/nm-access-point.c: Ditto. * libnm-util/nm-connection.c (nm_connection_compare): Add a stub for connection comparision. Currently used by the device activation code to determine if the new activation is the same as the old one. * src/nm-dbus-nmi.c (nm_dbus_get_user_key_for_network): Don't use the obsolete and wrong way of getting the dbus path for AP. Fixes the issue where the applet isn't able to ask password for the AP. * src/nm-device.c (nm_device_activate): Change the logic here - instead of giving up if the device is already connected, tear down it's connection (if it isn't the same as new one) and start the activation. * src/nm-manager.c: Add the beginnings of NMConnection storage and signals. * src/NetworkManagerAP.c (nm_ap_init): Set the default values to AP memebers, fixes the issue where all APs are always listed as encrypted. * src/NetworkManagerDbus.c (nm_dbus_get_object_path_for_network): Remove. APs have their own registered paths. * test/nm-tool.c (detail_device): Don't try to get active network from wireless device if it's not connected - dbus-glib will happily crash trying to marshal NULL. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2615 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-06-22 15:09:02 +00:00
DBusGProxy *ap_proxy;
guint32 flags;
guint32 wpa_flags;
guint32 rsn_flags;
GByteArray *ssid;
guint32 frequency;
char *hw_address;
int mode;
guint32 rate;
gint8 strength;
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
} NMAccessPointPrivate;
enum {
PROP_0,
PROP_FLAGS,
PROP_WPA_FLAGS,
PROP_RSN_FLAGS,
PROP_SSID,
PROP_FREQUENCY,
PROP_HW_ADDRESS,
PROP_MODE,
PROP_RATE,
PROP_STRENGTH,
LAST_PROP
};
#define DBUS_PROP_FLAGS "Flags"
#define DBUS_PROP_WPA_FLAGS "WpaFlags"
#define DBUS_PROP_RSN_FLAGS "RsnFlags"
#define DBUS_PROP_SSID "Ssid"
#define DBUS_PROP_FREQUENCY "Frequency"
#define DBUS_PROP_HW_ADDRESS "HwAddress"
#define DBUS_PROP_MODE "Mode"
#define DBUS_PROP_RATE "Rate"
#define DBUS_PROP_STRENGTH "Strength"
static void properties_changed_proxy (DBusGProxy *proxy,
GHashTable *properties,
gpointer user_data);
static void
nm_access_point_init (NMAccessPoint *ap)
{
}
static void
dispose (GObject *object)
{
NMAccessPointPrivate *priv = NM_ACCESS_POINT_GET_PRIVATE (object);
if (priv->disposed)
return;
priv->disposed = TRUE;
g_object_unref (priv->ap_proxy);
G_OBJECT_CLASS (nm_access_point_parent_class)->dispose (object);
}
static void
finalize (GObject *object)
{
NMAccessPointPrivate *priv = NM_ACCESS_POINT_GET_PRIVATE (object);
if (priv->ssid)
g_byte_array_free (priv->ssid, TRUE);
if (priv->hw_address)
g_free (priv->hw_address);
G_OBJECT_CLASS (nm_access_point_parent_class)->finalize (object);
}
static void
get_property (GObject *object,
guint prop_id,
GValue *value,
GParamSpec *pspec)
{
NMAccessPointPrivate *priv = NM_ACCESS_POINT_GET_PRIVATE (object);
GArray * ssid;
int len;
int i;
switch (prop_id) {
case PROP_FLAGS:
g_value_set_uint (value, priv->flags);
break;
case PROP_WPA_FLAGS:
g_value_set_uint (value, priv->wpa_flags);
break;
case PROP_RSN_FLAGS:
g_value_set_uint (value, priv->rsn_flags);
break;
case PROP_SSID:
len = priv->ssid ? priv->ssid->len : 0;
ssid = g_array_sized_new (FALSE, TRUE, sizeof (unsigned char), len);
for (i = 0; i < len; i++)
g_array_append_val (ssid, priv->ssid->data[i]);
g_value_set_boxed (value, ssid);
g_array_free (ssid, TRUE);
break;
case PROP_FREQUENCY:
g_value_set_uint (value, priv->frequency);
break;
case PROP_HW_ADDRESS:
g_value_set_string (value, priv->hw_address);
break;
case PROP_MODE:
g_value_set_int (value, priv->mode);
break;
case PROP_RATE:
g_value_set_uint (value, priv->rate);
break;
case PROP_STRENGTH:
g_value_set_char (value, priv->strength);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
2007-06-21 Tambet Ingo <tambet@ximian.com> * libnm-glib/Makefile.am: Add NMObject to build, remove nm-utils.[ch]. * nm-utils.[ch]: Remove. * libnm-glib/nm-object.c: Implement a base class for all libnm-glib dbus-aware objects for easy property access and dbus connection handling. * libnm-glib/nm-client.c: Derive from NMObject. * libnm-glib/nm-device.c: Ditto. * libnm-glib/nm-device-802-3-ethernet.c: Changes for being based on NMObject. * libnm-glib/nm-device-802-11-wireless.c: Ditto. * libnm-glib/nm-ip4-config.c: Ditto. * libnm-glib/nm-access-point.c: Ditto. * libnm-util/nm-connection.c (nm_connection_compare): Add a stub for connection comparision. Currently used by the device activation code to determine if the new activation is the same as the old one. * src/nm-dbus-nmi.c (nm_dbus_get_user_key_for_network): Don't use the obsolete and wrong way of getting the dbus path for AP. Fixes the issue where the applet isn't able to ask password for the AP. * src/nm-device.c (nm_device_activate): Change the logic here - instead of giving up if the device is already connected, tear down it's connection (if it isn't the same as new one) and start the activation. * src/nm-manager.c: Add the beginnings of NMConnection storage and signals. * src/NetworkManagerAP.c (nm_ap_init): Set the default values to AP memebers, fixes the issue where all APs are always listed as encrypted. * src/NetworkManagerDbus.c (nm_dbus_get_object_path_for_network): Remove. APs have their own registered paths. * test/nm-tool.c (detail_device): Don't try to get active network from wireless device if it's not connected - dbus-glib will happily crash trying to marshal NULL. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2615 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-06-22 15:09:02 +00:00
static GObject*
constructor (GType type,
guint n_construct_params,
GObjectConstructParam *construct_params)
{
NMObject *object;
NMAccessPointPrivate *priv;
object = (NMObject *) G_OBJECT_CLASS (nm_access_point_parent_class)->constructor (type,
n_construct_params,
construct_params);
if (!object)
return NULL;
priv = NM_ACCESS_POINT_GET_PRIVATE (object);
priv->ap_proxy = dbus_g_proxy_new_for_name (nm_object_get_connection (object),
NM_DBUS_SERVICE,
nm_object_get_path (object),
NM_DBUS_INTERFACE_ACCESS_POINT);
2007-06-21 Tambet Ingo <tambet@ximian.com> * libnm-glib/Makefile.am: Add NMObject to build, remove nm-utils.[ch]. * nm-utils.[ch]: Remove. * libnm-glib/nm-object.c: Implement a base class for all libnm-glib dbus-aware objects for easy property access and dbus connection handling. * libnm-glib/nm-client.c: Derive from NMObject. * libnm-glib/nm-device.c: Ditto. * libnm-glib/nm-device-802-3-ethernet.c: Changes for being based on NMObject. * libnm-glib/nm-device-802-11-wireless.c: Ditto. * libnm-glib/nm-ip4-config.c: Ditto. * libnm-glib/nm-access-point.c: Ditto. * libnm-util/nm-connection.c (nm_connection_compare): Add a stub for connection comparision. Currently used by the device activation code to determine if the new activation is the same as the old one. * src/nm-dbus-nmi.c (nm_dbus_get_user_key_for_network): Don't use the obsolete and wrong way of getting the dbus path for AP. Fixes the issue where the applet isn't able to ask password for the AP. * src/nm-device.c (nm_device_activate): Change the logic here - instead of giving up if the device is already connected, tear down it's connection (if it isn't the same as new one) and start the activation. * src/nm-manager.c: Add the beginnings of NMConnection storage and signals. * src/NetworkManagerAP.c (nm_ap_init): Set the default values to AP memebers, fixes the issue where all APs are always listed as encrypted. * src/NetworkManagerDbus.c (nm_dbus_get_object_path_for_network): Remove. APs have their own registered paths. * test/nm-tool.c (detail_device): Don't try to get active network from wireless device if it's not connected - dbus-glib will happily crash trying to marshal NULL. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2615 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-06-22 15:09:02 +00:00
dbus_g_proxy_add_signal (priv->ap_proxy, "PropertiesChanged",
dbus_g_type_get_map ("GHashTable", G_TYPE_STRING, G_TYPE_VALUE),
G_TYPE_INVALID);
2007-06-21 Tambet Ingo <tambet@ximian.com> * libnm-glib/Makefile.am: Add NMObject to build, remove nm-utils.[ch]. * nm-utils.[ch]: Remove. * libnm-glib/nm-object.c: Implement a base class for all libnm-glib dbus-aware objects for easy property access and dbus connection handling. * libnm-glib/nm-client.c: Derive from NMObject. * libnm-glib/nm-device.c: Ditto. * libnm-glib/nm-device-802-3-ethernet.c: Changes for being based on NMObject. * libnm-glib/nm-device-802-11-wireless.c: Ditto. * libnm-glib/nm-ip4-config.c: Ditto. * libnm-glib/nm-access-point.c: Ditto. * libnm-util/nm-connection.c (nm_connection_compare): Add a stub for connection comparision. Currently used by the device activation code to determine if the new activation is the same as the old one. * src/nm-dbus-nmi.c (nm_dbus_get_user_key_for_network): Don't use the obsolete and wrong way of getting the dbus path for AP. Fixes the issue where the applet isn't able to ask password for the AP. * src/nm-device.c (nm_device_activate): Change the logic here - instead of giving up if the device is already connected, tear down it's connection (if it isn't the same as new one) and start the activation. * src/nm-manager.c: Add the beginnings of NMConnection storage and signals. * src/NetworkManagerAP.c (nm_ap_init): Set the default values to AP memebers, fixes the issue where all APs are always listed as encrypted. * src/NetworkManagerDbus.c (nm_dbus_get_object_path_for_network): Remove. APs have their own registered paths. * test/nm-tool.c (detail_device): Don't try to get active network from wireless device if it's not connected - dbus-glib will happily crash trying to marshal NULL. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2615 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-06-22 15:09:02 +00:00
dbus_g_proxy_connect_signal (priv->ap_proxy,
"PropertiesChanged",
G_CALLBACK (properties_changed_proxy),
NM_ACCESS_POINT (object),
2007-06-21 Tambet Ingo <tambet@ximian.com> * libnm-glib/Makefile.am: Add NMObject to build, remove nm-utils.[ch]. * nm-utils.[ch]: Remove. * libnm-glib/nm-object.c: Implement a base class for all libnm-glib dbus-aware objects for easy property access and dbus connection handling. * libnm-glib/nm-client.c: Derive from NMObject. * libnm-glib/nm-device.c: Ditto. * libnm-glib/nm-device-802-3-ethernet.c: Changes for being based on NMObject. * libnm-glib/nm-device-802-11-wireless.c: Ditto. * libnm-glib/nm-ip4-config.c: Ditto. * libnm-glib/nm-access-point.c: Ditto. * libnm-util/nm-connection.c (nm_connection_compare): Add a stub for connection comparision. Currently used by the device activation code to determine if the new activation is the same as the old one. * src/nm-dbus-nmi.c (nm_dbus_get_user_key_for_network): Don't use the obsolete and wrong way of getting the dbus path for AP. Fixes the issue where the applet isn't able to ask password for the AP. * src/nm-device.c (nm_device_activate): Change the logic here - instead of giving up if the device is already connected, tear down it's connection (if it isn't the same as new one) and start the activation. * src/nm-manager.c: Add the beginnings of NMConnection storage and signals. * src/NetworkManagerAP.c (nm_ap_init): Set the default values to AP memebers, fixes the issue where all APs are always listed as encrypted. * src/NetworkManagerDbus.c (nm_dbus_get_object_path_for_network): Remove. APs have their own registered paths. * test/nm-tool.c (detail_device): Don't try to get active network from wireless device if it's not connected - dbus-glib will happily crash trying to marshal NULL. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2615 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-06-22 15:09:02 +00:00
NULL);
return G_OBJECT (object);
}
static void
nm_access_point_class_init (NMAccessPointClass *ap_class)
{
GObjectClass *object_class = G_OBJECT_CLASS (ap_class);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
g_type_class_add_private (ap_class, sizeof (NMAccessPointPrivate));
2007-06-21 Tambet Ingo <tambet@ximian.com> * libnm-glib/Makefile.am: Add NMObject to build, remove nm-utils.[ch]. * nm-utils.[ch]: Remove. * libnm-glib/nm-object.c: Implement a base class for all libnm-glib dbus-aware objects for easy property access and dbus connection handling. * libnm-glib/nm-client.c: Derive from NMObject. * libnm-glib/nm-device.c: Ditto. * libnm-glib/nm-device-802-3-ethernet.c: Changes for being based on NMObject. * libnm-glib/nm-device-802-11-wireless.c: Ditto. * libnm-glib/nm-ip4-config.c: Ditto. * libnm-glib/nm-access-point.c: Ditto. * libnm-util/nm-connection.c (nm_connection_compare): Add a stub for connection comparision. Currently used by the device activation code to determine if the new activation is the same as the old one. * src/nm-dbus-nmi.c (nm_dbus_get_user_key_for_network): Don't use the obsolete and wrong way of getting the dbus path for AP. Fixes the issue where the applet isn't able to ask password for the AP. * src/nm-device.c (nm_device_activate): Change the logic here - instead of giving up if the device is already connected, tear down it's connection (if it isn't the same as new one) and start the activation. * src/nm-manager.c: Add the beginnings of NMConnection storage and signals. * src/NetworkManagerAP.c (nm_ap_init): Set the default values to AP memebers, fixes the issue where all APs are always listed as encrypted. * src/NetworkManagerDbus.c (nm_dbus_get_object_path_for_network): Remove. APs have their own registered paths. * test/nm-tool.c (detail_device): Don't try to get active network from wireless device if it's not connected - dbus-glib will happily crash trying to marshal NULL. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2615 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-06-22 15:09:02 +00:00
/* virtual methods */
object_class->constructor = constructor;
object_class->get_property = get_property;
object_class->dispose = dispose;
object_class->finalize = finalize;
/* properties */
g_object_class_install_property
(object_class, PROP_FLAGS,
g_param_spec_uint (NM_ACCESS_POINT_FLAGS,
"Flags",
"Flags",
NM_802_11_AP_FLAGS_NONE,
NM_802_11_AP_FLAGS_PRIVACY,
NM_802_11_AP_FLAGS_NONE,
G_PARAM_READABLE));
g_object_class_install_property
(object_class, PROP_WPA_FLAGS,
g_param_spec_uint (NM_ACCESS_POINT_WPA_FLAGS,
"WPA Flags",
"WPA Flags",
0, G_MAXUINT32, 0,
G_PARAM_READABLE));
g_object_class_install_property
(object_class, PROP_RSN_FLAGS,
g_param_spec_uint (NM_ACCESS_POINT_RSN_FLAGS,
"RSN Flags",
"RSN Flags",
0, G_MAXUINT32, 0,
G_PARAM_READABLE));
g_object_class_install_property
(object_class, PROP_SSID,
g_param_spec_boxed (NM_ACCESS_POINT_SSID,
"SSID",
"SSID",
DBUS_TYPE_G_UCHAR_ARRAY,
G_PARAM_READABLE));
g_object_class_install_property
(object_class, PROP_FREQUENCY,
g_param_spec_uint (NM_ACCESS_POINT_FREQUENCY,
"Frequency",
"Frequency",
0, 10000, 0,
G_PARAM_READABLE));
g_object_class_install_property
(object_class, PROP_HW_ADDRESS,
g_param_spec_string (NM_ACCESS_POINT_HW_ADDRESS,
"MAC Address",
"Hardware MAC address",
NULL,
G_PARAM_READABLE));
g_object_class_install_property
(object_class, PROP_MODE,
g_param_spec_int (NM_ACCESS_POINT_MODE,
"Mode",
"Mode",
IW_MODE_ADHOC, IW_MODE_INFRA, IW_MODE_INFRA,
G_PARAM_READABLE));
g_object_class_install_property
(object_class, PROP_RATE,
g_param_spec_uint (NM_ACCESS_POINT_RATE,
"Rate",
"Rate",
0, G_MAXUINT16, 0,
G_PARAM_READABLE));
g_object_class_install_property
(object_class, PROP_STRENGTH,
g_param_spec_char (NM_ACCESS_POINT_STRENGTH,
"Strength",
"Strength",
G_MININT8, G_MAXINT8, 0,
G_PARAM_READABLE));
}
NMAccessPoint *
nm_access_point_new (DBusGConnection *connection, const char *path)
{
2007-06-21 Tambet Ingo <tambet@ximian.com> * libnm-glib/Makefile.am: Add NMObject to build, remove nm-utils.[ch]. * nm-utils.[ch]: Remove. * libnm-glib/nm-object.c: Implement a base class for all libnm-glib dbus-aware objects for easy property access and dbus connection handling. * libnm-glib/nm-client.c: Derive from NMObject. * libnm-glib/nm-device.c: Ditto. * libnm-glib/nm-device-802-3-ethernet.c: Changes for being based on NMObject. * libnm-glib/nm-device-802-11-wireless.c: Ditto. * libnm-glib/nm-ip4-config.c: Ditto. * libnm-glib/nm-access-point.c: Ditto. * libnm-util/nm-connection.c (nm_connection_compare): Add a stub for connection comparision. Currently used by the device activation code to determine if the new activation is the same as the old one. * src/nm-dbus-nmi.c (nm_dbus_get_user_key_for_network): Don't use the obsolete and wrong way of getting the dbus path for AP. Fixes the issue where the applet isn't able to ask password for the AP. * src/nm-device.c (nm_device_activate): Change the logic here - instead of giving up if the device is already connected, tear down it's connection (if it isn't the same as new one) and start the activation. * src/nm-manager.c: Add the beginnings of NMConnection storage and signals. * src/NetworkManagerAP.c (nm_ap_init): Set the default values to AP memebers, fixes the issue where all APs are always listed as encrypted. * src/NetworkManagerDbus.c (nm_dbus_get_object_path_for_network): Remove. APs have their own registered paths. * test/nm-tool.c (detail_device): Don't try to get active network from wireless device if it's not connected - dbus-glib will happily crash trying to marshal NULL. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2615 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-06-22 15:09:02 +00:00
return (NMAccessPoint *) g_object_new (NM_TYPE_ACCESS_POINT,
NM_OBJECT_CONNECTION, connection,
NM_OBJECT_PATH, path,
NULL);
}
static void
handle_property_changed (gpointer key, gpointer data, gpointer user_data)
{
NMAccessPoint *ap = NM_ACCESS_POINT (user_data);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
NMAccessPointPrivate *priv = NM_ACCESS_POINT_GET_PRIVATE (ap);
char *g_propname = NULL;
GValue *value = (GValue *) data;
gboolean success = TRUE;
if (!strcmp (key, DBUS_PROP_FLAGS)) {
g_propname = NM_ACCESS_POINT_FLAGS;
if (G_VALUE_HOLDS_UINT (value))
priv->flags = g_value_get_uint (value);
} else if (!strcmp (key, DBUS_PROP_WPA_FLAGS)) {
g_propname = NM_ACCESS_POINT_WPA_FLAGS;
if (G_VALUE_HOLDS_UINT (value))
priv->wpa_flags = g_value_get_uint (value);
} else if (!strcmp (key, DBUS_PROP_RSN_FLAGS)) {
g_propname = NM_ACCESS_POINT_RSN_FLAGS;
if (G_VALUE_HOLDS_UINT (value))
priv->rsn_flags = g_value_get_uint (value);
} else if (!strcmp (key, DBUS_PROP_SSID)) {
GArray * tmp = g_value_get_boxed (value);
g_propname = NM_ACCESS_POINT_SSID;
if (priv->ssid) {
g_byte_array_free (priv->ssid, TRUE);
priv->ssid = NULL;
}
if (tmp && tmp->len) {
int i;
unsigned char byte;
priv->ssid = g_byte_array_sized_new (tmp->len);
for (i = 0; i < tmp->len; i++) {
byte = g_array_index (tmp, unsigned char, i);
g_byte_array_append (priv->ssid, &byte, 1);
}
}
} else if (!strcmp (key, DBUS_PROP_FREQUENCY)) {
g_propname = NM_ACCESS_POINT_FREQUENCY;
if (G_VALUE_HOLDS_UINT (value))
priv->frequency = g_value_get_uint (value);
} else if (!strcmp (key, DBUS_PROP_HW_ADDRESS)) {
g_propname = NM_ACCESS_POINT_HW_ADDRESS;
if (priv->hw_address) {
g_free (priv->hw_address);
priv->hw_address = NULL;
}
if (G_VALUE_HOLDS_STRING (value))
priv->hw_address = g_strdup (g_value_get_string (value));
} else if (!strcmp (key, DBUS_PROP_MODE)) {
g_propname = NM_ACCESS_POINT_MODE;
if (G_VALUE_HOLDS_UINT (value))
priv->mode = g_value_get_uint (value);
} else if (!strcmp (key, DBUS_PROP_RATE)) {
g_propname = NM_ACCESS_POINT_RATE;
if (G_VALUE_HOLDS_UINT (value))
priv->rate = g_value_get_uint (value);
} else if (!strcmp (key, DBUS_PROP_STRENGTH)) {
g_propname = NM_ACCESS_POINT_STRENGTH;
if (G_VALUE_HOLDS_UCHAR (value))
priv->strength = g_value_get_uchar (value);
} else {
success = FALSE;
}
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
if (success) {
g_object_notify (G_OBJECT (ap), g_propname);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
}
}
static void
properties_changed_proxy (DBusGProxy *proxy,
GHashTable *properties,
gpointer user_data)
{
NMAccessPoint *ap = NM_ACCESS_POINT (user_data);
g_hash_table_foreach (properties, handle_property_changed, ap);
}
guint32
2007-08-28 Dan Williams <dcbw@redhat.com> Remove NMAPSecurity objects, they are replaced with flags on the APs for each AP's capabilities, and by NMConnection/NMSettings objects for user defined connections. * include/NetworkManager.h - Redefine 802.11 security properties. There are now device capabilities and AP flags and AP security flags. It was way to unclear before. * src/Makefile.am src/nm-ap-security-leap.h src/nm-ap-security-leap.c src/nm-ap-security-wpa-eap.c src/nm-ap-security-wpa-eap.h src/nm-ap-security-private.h src/nm-ap-security-wpa-psk.c src/nm-ap-security-wpa-psk.h src/nm-ap-security-wep.c src/nm-ap-security-wep.h src/nm-ap-security.c src/nm-ap-security.h - Removed, to be replaced with NMConnection/NMSettings objects * src/nm-dbus-nmi.c src/nm-dbus-nmi.h - Removed, to be replaced by code that talks to the new info daemon interface and gets NMConnection/NMSettings objects * src/backends/NetworkManagerSuSE.c - Remove usage of NMAPSecurity; should be replaced by a system-level info-daemon that does the same thing but talks the new info-daemon D-Bus interface * src/NetworkManagerAP.h src/NetworkManagerAP.c src/NetworkManagerAPList.c libnm-glib/libnm-glib-test.c - Remove usage of NMAPSecurity objects and adjust to new flags for WPA/RSN * libnm-glib/nm-access-point.c libnm-glib/nm-access-point.h introspection/nm-access-point.xml test/nm-tool.c - Adjust to new flags for AP security * utils/nm-utils.c utils/nm-utils.h src/vpn-manager/nm-dbus-vpn.c - Remove D-Bus pending call stuff from nm-utils and put it in the VPN stuff which is the only place it's used * src/nm-device-interface.c src/nm-device-interface.h introspection/nm-device.xml src/nm-activation-request.c src/nm-activation-request.h src/nm-device.c - Add a new 'specific_object' argument that hints to NM what actual AP or other device-specific thing the connection should apply to. NMConnection objects can apply to more than one actual device/AP. * libnm-util/nm-connection.c * libnm-util/nm-connection.h - Add 'have_secrets" call stubs * libnm-util/cipher.h - Move NM_AUTH_TYPE_* defines here for now * src/nm-device-802-11-wireless.c - Remove usage of NMAPSecurity, to be replaced with NMConnection/ NMSettings objects * src/NetworkManagerDbus.c * src/NetworkManagerPolicy.c - Remove usage of update_allowed_networks, should be pushing data in a different manner git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2738 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-08-28 14:47:31 +00:00
nm_access_point_get_flags (NMAccessPoint *ap)
{
NMAccessPointPrivate *priv;
2007-08-28 Dan Williams <dcbw@redhat.com> Remove NMAPSecurity objects, they are replaced with flags on the APs for each AP's capabilities, and by NMConnection/NMSettings objects for user defined connections. * include/NetworkManager.h - Redefine 802.11 security properties. There are now device capabilities and AP flags and AP security flags. It was way to unclear before. * src/Makefile.am src/nm-ap-security-leap.h src/nm-ap-security-leap.c src/nm-ap-security-wpa-eap.c src/nm-ap-security-wpa-eap.h src/nm-ap-security-private.h src/nm-ap-security-wpa-psk.c src/nm-ap-security-wpa-psk.h src/nm-ap-security-wep.c src/nm-ap-security-wep.h src/nm-ap-security.c src/nm-ap-security.h - Removed, to be replaced with NMConnection/NMSettings objects * src/nm-dbus-nmi.c src/nm-dbus-nmi.h - Removed, to be replaced by code that talks to the new info daemon interface and gets NMConnection/NMSettings objects * src/backends/NetworkManagerSuSE.c - Remove usage of NMAPSecurity; should be replaced by a system-level info-daemon that does the same thing but talks the new info-daemon D-Bus interface * src/NetworkManagerAP.h src/NetworkManagerAP.c src/NetworkManagerAPList.c libnm-glib/libnm-glib-test.c - Remove usage of NMAPSecurity objects and adjust to new flags for WPA/RSN * libnm-glib/nm-access-point.c libnm-glib/nm-access-point.h introspection/nm-access-point.xml test/nm-tool.c - Adjust to new flags for AP security * utils/nm-utils.c utils/nm-utils.h src/vpn-manager/nm-dbus-vpn.c - Remove D-Bus pending call stuff from nm-utils and put it in the VPN stuff which is the only place it's used * src/nm-device-interface.c src/nm-device-interface.h introspection/nm-device.xml src/nm-activation-request.c src/nm-activation-request.h src/nm-device.c - Add a new 'specific_object' argument that hints to NM what actual AP or other device-specific thing the connection should apply to. NMConnection objects can apply to more than one actual device/AP. * libnm-util/nm-connection.c * libnm-util/nm-connection.h - Add 'have_secrets" call stubs * libnm-util/cipher.h - Move NM_AUTH_TYPE_* defines here for now * src/nm-device-802-11-wireless.c - Remove usage of NMAPSecurity, to be replaced with NMConnection/ NMSettings objects * src/NetworkManagerDbus.c * src/NetworkManagerPolicy.c - Remove usage of update_allowed_networks, should be pushing data in a different manner git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2738 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-08-28 14:47:31 +00:00
g_return_val_if_fail (NM_IS_ACCESS_POINT (ap), NM_802_11_AP_FLAGS_NONE);
priv = NM_ACCESS_POINT_GET_PRIVATE (ap);
if (!priv->flags) {
priv->flags = nm_object_get_uint_property (NM_OBJECT (ap),
NM_DBUS_INTERFACE_ACCESS_POINT,
DBUS_PROP_FLAGS);
}
return priv->flags;
}
2007-08-28 Dan Williams <dcbw@redhat.com> Remove NMAPSecurity objects, they are replaced with flags on the APs for each AP's capabilities, and by NMConnection/NMSettings objects for user defined connections. * include/NetworkManager.h - Redefine 802.11 security properties. There are now device capabilities and AP flags and AP security flags. It was way to unclear before. * src/Makefile.am src/nm-ap-security-leap.h src/nm-ap-security-leap.c src/nm-ap-security-wpa-eap.c src/nm-ap-security-wpa-eap.h src/nm-ap-security-private.h src/nm-ap-security-wpa-psk.c src/nm-ap-security-wpa-psk.h src/nm-ap-security-wep.c src/nm-ap-security-wep.h src/nm-ap-security.c src/nm-ap-security.h - Removed, to be replaced with NMConnection/NMSettings objects * src/nm-dbus-nmi.c src/nm-dbus-nmi.h - Removed, to be replaced by code that talks to the new info daemon interface and gets NMConnection/NMSettings objects * src/backends/NetworkManagerSuSE.c - Remove usage of NMAPSecurity; should be replaced by a system-level info-daemon that does the same thing but talks the new info-daemon D-Bus interface * src/NetworkManagerAP.h src/NetworkManagerAP.c src/NetworkManagerAPList.c libnm-glib/libnm-glib-test.c - Remove usage of NMAPSecurity objects and adjust to new flags for WPA/RSN * libnm-glib/nm-access-point.c libnm-glib/nm-access-point.h introspection/nm-access-point.xml test/nm-tool.c - Adjust to new flags for AP security * utils/nm-utils.c utils/nm-utils.h src/vpn-manager/nm-dbus-vpn.c - Remove D-Bus pending call stuff from nm-utils and put it in the VPN stuff which is the only place it's used * src/nm-device-interface.c src/nm-device-interface.h introspection/nm-device.xml src/nm-activation-request.c src/nm-activation-request.h src/nm-device.c - Add a new 'specific_object' argument that hints to NM what actual AP or other device-specific thing the connection should apply to. NMConnection objects can apply to more than one actual device/AP. * libnm-util/nm-connection.c * libnm-util/nm-connection.h - Add 'have_secrets" call stubs * libnm-util/cipher.h - Move NM_AUTH_TYPE_* defines here for now * src/nm-device-802-11-wireless.c - Remove usage of NMAPSecurity, to be replaced with NMConnection/ NMSettings objects * src/NetworkManagerDbus.c * src/NetworkManagerPolicy.c - Remove usage of update_allowed_networks, should be pushing data in a different manner git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2738 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-08-28 14:47:31 +00:00
guint32
nm_access_point_get_wpa_flags (NMAccessPoint *ap)
{
NMAccessPointPrivate *priv;
2007-08-28 Dan Williams <dcbw@redhat.com> Remove NMAPSecurity objects, they are replaced with flags on the APs for each AP's capabilities, and by NMConnection/NMSettings objects for user defined connections. * include/NetworkManager.h - Redefine 802.11 security properties. There are now device capabilities and AP flags and AP security flags. It was way to unclear before. * src/Makefile.am src/nm-ap-security-leap.h src/nm-ap-security-leap.c src/nm-ap-security-wpa-eap.c src/nm-ap-security-wpa-eap.h src/nm-ap-security-private.h src/nm-ap-security-wpa-psk.c src/nm-ap-security-wpa-psk.h src/nm-ap-security-wep.c src/nm-ap-security-wep.h src/nm-ap-security.c src/nm-ap-security.h - Removed, to be replaced with NMConnection/NMSettings objects * src/nm-dbus-nmi.c src/nm-dbus-nmi.h - Removed, to be replaced by code that talks to the new info daemon interface and gets NMConnection/NMSettings objects * src/backends/NetworkManagerSuSE.c - Remove usage of NMAPSecurity; should be replaced by a system-level info-daemon that does the same thing but talks the new info-daemon D-Bus interface * src/NetworkManagerAP.h src/NetworkManagerAP.c src/NetworkManagerAPList.c libnm-glib/libnm-glib-test.c - Remove usage of NMAPSecurity objects and adjust to new flags for WPA/RSN * libnm-glib/nm-access-point.c libnm-glib/nm-access-point.h introspection/nm-access-point.xml test/nm-tool.c - Adjust to new flags for AP security * utils/nm-utils.c utils/nm-utils.h src/vpn-manager/nm-dbus-vpn.c - Remove D-Bus pending call stuff from nm-utils and put it in the VPN stuff which is the only place it's used * src/nm-device-interface.c src/nm-device-interface.h introspection/nm-device.xml src/nm-activation-request.c src/nm-activation-request.h src/nm-device.c - Add a new 'specific_object' argument that hints to NM what actual AP or other device-specific thing the connection should apply to. NMConnection objects can apply to more than one actual device/AP. * libnm-util/nm-connection.c * libnm-util/nm-connection.h - Add 'have_secrets" call stubs * libnm-util/cipher.h - Move NM_AUTH_TYPE_* defines here for now * src/nm-device-802-11-wireless.c - Remove usage of NMAPSecurity, to be replaced with NMConnection/ NMSettings objects * src/NetworkManagerDbus.c * src/NetworkManagerPolicy.c - Remove usage of update_allowed_networks, should be pushing data in a different manner git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2738 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-08-28 14:47:31 +00:00
g_return_val_if_fail (NM_IS_ACCESS_POINT (ap), NM_802_11_AP_SEC_NONE);
priv = NM_ACCESS_POINT_GET_PRIVATE (ap);
if (!priv->wpa_flags) {
priv->wpa_flags = nm_object_get_uint_property (NM_OBJECT (ap),
NM_DBUS_INTERFACE_ACCESS_POINT,
DBUS_PROP_WPA_FLAGS);
}
return priv->wpa_flags;
2007-08-28 Dan Williams <dcbw@redhat.com> Remove NMAPSecurity objects, they are replaced with flags on the APs for each AP's capabilities, and by NMConnection/NMSettings objects for user defined connections. * include/NetworkManager.h - Redefine 802.11 security properties. There are now device capabilities and AP flags and AP security flags. It was way to unclear before. * src/Makefile.am src/nm-ap-security-leap.h src/nm-ap-security-leap.c src/nm-ap-security-wpa-eap.c src/nm-ap-security-wpa-eap.h src/nm-ap-security-private.h src/nm-ap-security-wpa-psk.c src/nm-ap-security-wpa-psk.h src/nm-ap-security-wep.c src/nm-ap-security-wep.h src/nm-ap-security.c src/nm-ap-security.h - Removed, to be replaced with NMConnection/NMSettings objects * src/nm-dbus-nmi.c src/nm-dbus-nmi.h - Removed, to be replaced by code that talks to the new info daemon interface and gets NMConnection/NMSettings objects * src/backends/NetworkManagerSuSE.c - Remove usage of NMAPSecurity; should be replaced by a system-level info-daemon that does the same thing but talks the new info-daemon D-Bus interface * src/NetworkManagerAP.h src/NetworkManagerAP.c src/NetworkManagerAPList.c libnm-glib/libnm-glib-test.c - Remove usage of NMAPSecurity objects and adjust to new flags for WPA/RSN * libnm-glib/nm-access-point.c libnm-glib/nm-access-point.h introspection/nm-access-point.xml test/nm-tool.c - Adjust to new flags for AP security * utils/nm-utils.c utils/nm-utils.h src/vpn-manager/nm-dbus-vpn.c - Remove D-Bus pending call stuff from nm-utils and put it in the VPN stuff which is the only place it's used * src/nm-device-interface.c src/nm-device-interface.h introspection/nm-device.xml src/nm-activation-request.c src/nm-activation-request.h src/nm-device.c - Add a new 'specific_object' argument that hints to NM what actual AP or other device-specific thing the connection should apply to. NMConnection objects can apply to more than one actual device/AP. * libnm-util/nm-connection.c * libnm-util/nm-connection.h - Add 'have_secrets" call stubs * libnm-util/cipher.h - Move NM_AUTH_TYPE_* defines here for now * src/nm-device-802-11-wireless.c - Remove usage of NMAPSecurity, to be replaced with NMConnection/ NMSettings objects * src/NetworkManagerDbus.c * src/NetworkManagerPolicy.c - Remove usage of update_allowed_networks, should be pushing data in a different manner git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2738 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-08-28 14:47:31 +00:00
}
guint32
nm_access_point_get_rsn_flags (NMAccessPoint *ap)
{
NMAccessPointPrivate *priv;
2007-08-28 Dan Williams <dcbw@redhat.com> Remove NMAPSecurity objects, they are replaced with flags on the APs for each AP's capabilities, and by NMConnection/NMSettings objects for user defined connections. * include/NetworkManager.h - Redefine 802.11 security properties. There are now device capabilities and AP flags and AP security flags. It was way to unclear before. * src/Makefile.am src/nm-ap-security-leap.h src/nm-ap-security-leap.c src/nm-ap-security-wpa-eap.c src/nm-ap-security-wpa-eap.h src/nm-ap-security-private.h src/nm-ap-security-wpa-psk.c src/nm-ap-security-wpa-psk.h src/nm-ap-security-wep.c src/nm-ap-security-wep.h src/nm-ap-security.c src/nm-ap-security.h - Removed, to be replaced with NMConnection/NMSettings objects * src/nm-dbus-nmi.c src/nm-dbus-nmi.h - Removed, to be replaced by code that talks to the new info daemon interface and gets NMConnection/NMSettings objects * src/backends/NetworkManagerSuSE.c - Remove usage of NMAPSecurity; should be replaced by a system-level info-daemon that does the same thing but talks the new info-daemon D-Bus interface * src/NetworkManagerAP.h src/NetworkManagerAP.c src/NetworkManagerAPList.c libnm-glib/libnm-glib-test.c - Remove usage of NMAPSecurity objects and adjust to new flags for WPA/RSN * libnm-glib/nm-access-point.c libnm-glib/nm-access-point.h introspection/nm-access-point.xml test/nm-tool.c - Adjust to new flags for AP security * utils/nm-utils.c utils/nm-utils.h src/vpn-manager/nm-dbus-vpn.c - Remove D-Bus pending call stuff from nm-utils and put it in the VPN stuff which is the only place it's used * src/nm-device-interface.c src/nm-device-interface.h introspection/nm-device.xml src/nm-activation-request.c src/nm-activation-request.h src/nm-device.c - Add a new 'specific_object' argument that hints to NM what actual AP or other device-specific thing the connection should apply to. NMConnection objects can apply to more than one actual device/AP. * libnm-util/nm-connection.c * libnm-util/nm-connection.h - Add 'have_secrets" call stubs * libnm-util/cipher.h - Move NM_AUTH_TYPE_* defines here for now * src/nm-device-802-11-wireless.c - Remove usage of NMAPSecurity, to be replaced with NMConnection/ NMSettings objects * src/NetworkManagerDbus.c * src/NetworkManagerPolicy.c - Remove usage of update_allowed_networks, should be pushing data in a different manner git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2738 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-08-28 14:47:31 +00:00
g_return_val_if_fail (NM_IS_ACCESS_POINT (ap), NM_802_11_AP_SEC_NONE);
priv = NM_ACCESS_POINT_GET_PRIVATE (ap);
if (!priv->rsn_flags) {
priv->rsn_flags = nm_object_get_uint_property (NM_OBJECT (ap),
NM_DBUS_INTERFACE_ACCESS_POINT,
DBUS_PROP_RSN_FLAGS);
}
return priv->rsn_flags;
}
const GByteArray *
nm_access_point_get_ssid (NMAccessPoint *ap)
{
NMAccessPointPrivate *priv;
g_return_val_if_fail (NM_IS_ACCESS_POINT (ap), NULL);
priv = NM_ACCESS_POINT_GET_PRIVATE (ap);
if (!priv->ssid) {
priv->ssid = nm_object_get_byte_array_property (NM_OBJECT (ap),
NM_DBUS_INTERFACE_ACCESS_POINT,
DBUS_PROP_SSID);
}
return priv->ssid;
}
guint32
nm_access_point_get_frequency (NMAccessPoint *ap)
{
NMAccessPointPrivate *priv;
2007-06-21 Tambet Ingo <tambet@ximian.com> * libnm-glib/Makefile.am: Add NMObject to build, remove nm-utils.[ch]. * nm-utils.[ch]: Remove. * libnm-glib/nm-object.c: Implement a base class for all libnm-glib dbus-aware objects for easy property access and dbus connection handling. * libnm-glib/nm-client.c: Derive from NMObject. * libnm-glib/nm-device.c: Ditto. * libnm-glib/nm-device-802-3-ethernet.c: Changes for being based on NMObject. * libnm-glib/nm-device-802-11-wireless.c: Ditto. * libnm-glib/nm-ip4-config.c: Ditto. * libnm-glib/nm-access-point.c: Ditto. * libnm-util/nm-connection.c (nm_connection_compare): Add a stub for connection comparision. Currently used by the device activation code to determine if the new activation is the same as the old one. * src/nm-dbus-nmi.c (nm_dbus_get_user_key_for_network): Don't use the obsolete and wrong way of getting the dbus path for AP. Fixes the issue where the applet isn't able to ask password for the AP. * src/nm-device.c (nm_device_activate): Change the logic here - instead of giving up if the device is already connected, tear down it's connection (if it isn't the same as new one) and start the activation. * src/nm-manager.c: Add the beginnings of NMConnection storage and signals. * src/NetworkManagerAP.c (nm_ap_init): Set the default values to AP memebers, fixes the issue where all APs are always listed as encrypted. * src/NetworkManagerDbus.c (nm_dbus_get_object_path_for_network): Remove. APs have their own registered paths. * test/nm-tool.c (detail_device): Don't try to get active network from wireless device if it's not connected - dbus-glib will happily crash trying to marshal NULL. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2615 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-06-22 15:09:02 +00:00
g_return_val_if_fail (NM_IS_ACCESS_POINT (ap), 0);
priv = NM_ACCESS_POINT_GET_PRIVATE (ap);
if (!priv->frequency) {
priv->frequency = nm_object_get_uint_property (NM_OBJECT (ap),
NM_DBUS_INTERFACE_ACCESS_POINT,
DBUS_PROP_FREQUENCY);
}
return priv->frequency;
}
char *
nm_access_point_get_hw_address (NMAccessPoint *ap)
{
NMAccessPointPrivate *priv;
g_return_val_if_fail (NM_IS_ACCESS_POINT (ap), NULL);
priv = NM_ACCESS_POINT_GET_PRIVATE (ap);
if (!priv->hw_address) {
priv->hw_address = nm_object_get_string_property (NM_OBJECT (ap),
NM_DBUS_INTERFACE_ACCESS_POINT,
DBUS_PROP_HW_ADDRESS);
}
return priv->hw_address;
}
int
nm_access_point_get_mode (NMAccessPoint *ap)
{
NMAccessPointPrivate *priv;
g_return_val_if_fail (NM_IS_ACCESS_POINT (ap), 0);
priv = NM_ACCESS_POINT_GET_PRIVATE (ap);
if (!priv->mode) {
priv->mode = nm_object_get_int_property (NM_OBJECT (ap),
NM_DBUS_INTERFACE_ACCESS_POINT,
DBUS_PROP_MODE);
}
return priv->mode;
}
guint32
nm_access_point_get_rate (NMAccessPoint *ap)
{
NMAccessPointPrivate *priv;
g_return_val_if_fail (NM_IS_ACCESS_POINT (ap), 0);
priv = NM_ACCESS_POINT_GET_PRIVATE (ap);
if (!priv->rate) {
priv->rate = nm_object_get_uint_property (NM_OBJECT (ap),
NM_DBUS_INTERFACE_ACCESS_POINT,
DBUS_PROP_RATE);
}
return priv->rate;
}
gint8
nm_access_point_get_strength (NMAccessPoint *ap)
{
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
NMAccessPointPrivate *priv;
g_return_val_if_fail (NM_IS_ACCESS_POINT (ap), 0);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
priv = NM_ACCESS_POINT_GET_PRIVATE (ap);
if (!priv->strength) {
priv->strength = nm_object_get_byte_property (NM_OBJECT (ap),
NM_DBUS_INTERFACE_ACCESS_POINT,
DBUS_PROP_STRENGTH);
}
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
return priv->strength;
}