NetworkManager/src/NetworkManagerSystem.h

81 lines
2.9 KiB
C
Raw Normal View History

2007-12-06 Tambet Ingo <tambet@gmail.com> * src/NetworkManagerSystem.c * (nm_system_device_set_from_ip4_config): Change the arguments: This whole file shouldn't really know anything about NMDevices, it should deal only with device interfaces. Devices might have different ifaces for different stuff and this place shouldn't know anything about it. * src/NetworkManagerPolicy.c: Get rid of leftover global * variable global_policy. (global_state_changed): Implement. In the current NM it's not really important, but will be required in the case of multiple active devices. (Or even better, if stuff like that gets moved out from NM). * src/vpn-manager/nm-vpn-connection.c * (connection_state_changed): Don't call nm_system_device_set_from_ip4_config() directly, use nm_device_set_ip4_config() instead. * src/nm-device.c: Add a ip_face protected member. It's used for * 'multi-interface' devices like serial devices (ttyS0 and ppp0 for example). (nm_device_get_ip_iface): Implement. Default to the device iface if ip_iface is not set. (nm_device_set_ip_iface): Implement. (nm_device_activate_stage5_ip_config_commit): Move all the extra actions that happen after setting ip4_config from here ... (nm_device_set_ip4_config): ... to here. The reason behind it is that no other code than this function should call nm_system_device_set_from_ip4_config() because no other code has enough information on which arguments to use. So instead, other code could just set the new ip4 config using this function and everyone is happy. * src/nm-umts-device.c: Store the pending ids so that we can * remove pending actions if we happen to get deactivated while something is pending. (automatic_registration): Handle the response that indicates pending network registration and wait until the pending registration is done. (real_deactivate_quickly): If there's a pending operation, cancel it. * src/nm-serial-device.c (ppp_ip4_config): Set the ip_iface when * the iface is up ... (real_deactivate_quickly): ... and remove it when it's down. (nm_serial_device_get_reply): Return the timeout id so that the callers can remove it if needed. (nm_serial_device_wait_for_reply): Ditto. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3141 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-12-06 14:51:43 +00:00
/* -*- Mode: C; tab-width: 5; indent-tabs-mode: t; c-basic-offset: 5 -*- */
/* NetworkManager -- Network link manager
*
* Dan Williams <dcbw@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* (C) Copyright 2004 Red Hat, Inc.
*/
#ifndef NETWORK_MANAGER_SYSTEM_H
#define NETWORK_MANAGER_SYSTEM_H
#include <glib.h>
#include "nm-device.h"
#include "nm-ip4-config.h"
/* Prototypes for system/distribution dependent functions,
* implemented in the backend files in backends/ directory
*/
void nm_system_init (void);
void nm_system_device_flush_ip4_routes (NMDevice *dev);
void nm_system_device_flush_ip4_routes_with_iface (const char *iface);
void nm_system_device_replace_default_ip4_route (const char *iface,
2008-03-07 Dan Williams <dcbw@redhat.com> First pass of multiple active device support. Expect bugs. * src/nm-ip4-config.c src/nm-ip4-config.h - (nm_ip4_config_get_secondary, nm_ip4_config_set_secondary): remove; there are better ways to do this in the named manager * src/nm-device.c src/nm-device.h - (nm_device_can_activate): return whether the device can activate a connection right now; taking into account things like carrier state and rfkill state - (nm_device_get_best_auto_connection): renamed from nm_device_get_best_connection - (real_act_stage4_get_ip4_config): MTU stuff is now handled in the device subclasses themselves, so that each device can override the MTU from it's NMSetting subclass if needed - (nm_device_set_ip4_config): set MTU when setting up routes and stuff in NetworkManagerSystem.c, not here * src/named-manager/nm-named-manager.c src/named-manager/nm-named-manager.h - (nm_named_manager_name_owner_changed, nm_named_manager_dbus_connection_changed): fix for changes to rewrite_resolv_conf() - (compute_nameservers): don't need the NMNamedManager at all, remove from parameter list - (merge_one_ip4_config): new function; merge ip4 configs together - (rewrite_resolv_conf): write out resolv.conf from all the stored ip4 configs; the VPN config takes precedence, then the best device config, then the rest of the configs - (get_domain_for_config): take the NMNamedManager as an argument to check whether the config is the VPN config - (add_ip4_config_to_named): fixups for removal of the 'secondary' attribute from ip4 configs - (add_all_ip4_configs_to_named): add all the configs in priority order - (remove_ip4_config_from_named): fix for changes to get_domain_for_config() - (nm_named_manager_add_ip4_config): assign the config to the right slot based on its type; callers must pass in the type now - (get_last_default_domain): remove, unused - (nm_named_manager_remove_ip4_config): handle config slots correctly * src/nm-device-802-11-wireless.c - (real_can_activate): new function - (real_get_best_auto_connection): renamed from real_get_best_connection - (real_act_stage4_get_ip4_config): handle MTU override * src/nm-device-802-3-ethernet.c - (real_can_activate): new function - (real_get_best_auto_connection): renamed from real_get_best_connection - (real_act_stage4_get_ip4_config): new function; handle MTU override * src/vpn-manager/nm-vpn-connection.c - (nm_vpn_connection_ip4_config_get): don't need to set the 'secondary' attribute on the ip4 config * src/NetworkManagerPolicy.c - (nm_policy_auto_get_best_device): remove - (nm_policy_device_change_check): remove - (update_default_route): new function; set the default route via the specified device - (get_device_priority): new function; return the priority number of a device type WRT which one should have the default route. Order is (highest to lowest) wired, wireless, GSM, CDMA. - (update_routing_and_dns): new function; determine which device should have the default route, then update the routing table and DNS - (maybe_auto_activate_device): new function; if a device is now available for activation, find out what connection it would like to activate and do it - (schedule_activate_check): new function; if a device can be activated now, schedule the activation. Each device may have only one pending activation at a given time. - (device_state_changed): if activation was canceled, try again, possibly with another connection; if the device was activated, update routing and DNS; if the device was deactivated, try again with another connection - (device_carrier_changed): if there is no carrier, deactivate the device; otherwise schedule an activation check for the device - (wireless_networks_changed): schedule an activation check for the device - (device_added): keep track of the signal handler IDs so they can be removed when the device goes away - (device_removed): remove any signal handlers that might be attached to the device; update routing and DNS - (schedule_activate_all): new function - (connections_added, connection_added, connection_updated): when connections change, schedule all devices for an activation check - (connection_removed): when a device is deactivated because its connection was removed, schedule another activation check for it - (nm_policy_destroy): destroy pending activations and disconnect all device signal handlers * src/nm-manager.c - (nm_manager_activate_device): if the device was already actived, deactivate it - (deactivate_old_device): remove - (connection_added_default_handler, impl_manager_activate_device): don't deactivate other devices when activating this one * src/backends/NetworkManagerGentoo.c src/backends/NetworkManagerFrugalware.c src/backends/NetworkManagerPaldo.c src/backends/NetworkManagerRedHat.c src/backends/NetworkManagerSlackware.c src/backends/NetworkManagerArch.c src/backends/NetworkManagerSuSE.c src/backends/NetworkManagerDebian.c - (nm_system_get_mtu): remove; MTU should be provided through the distro's system settings service plugin instead - (nm_system_device_add_default_route_via_device): remove - (nm_system_device_add_default_route_via_device_with_iface): remove - (nm_system_device_replace_default_route): new function; call generic implementation * src/backends/NetworkManagerGeneric.c src/backends/NetworkManagerGeneric.h - (nm_generic_device_add_default_route_via_device, nm_generic_device_add_default_route_via_device_with_iface): remove - (nm_generic_device_replace_default_route): replace the default route with the given route via some gateway * src/NetworkManagerSystem.c src/NetworkManagerSystem.h - (nm_system_device_set_from_ip4_config): let the policy handle updates to routing and DNS; but set the MTU here - (nm_system_vpn_device_set_from_ip4_config): set the route with the ip_iface of the active device; use the standard MTU setting function - (nm_system_set_mtu): remove - (nm_system_device_set_mtu): consolidate MTU setting code in one place git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3391 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2008-03-07 19:41:32 +00:00
guint32 gw,
guint32 mss);
void nm_system_device_add_ip4_route_via_device_with_iface (const char *iface, const char *route);
void nm_system_device_flush_ip4_addresses (NMDevice *dev);
void nm_system_device_flush_ip4_addresses_with_iface (const char *iface);
void nm_system_enable_loopback (void);
void nm_system_kill_all_dhcp_daemons (void);
void nm_system_update_dns (void);
2007-12-06 Tambet Ingo <tambet@gmail.com> * src/NetworkManagerSystem.c * (nm_system_device_set_from_ip4_config): Change the arguments: This whole file shouldn't really know anything about NMDevices, it should deal only with device interfaces. Devices might have different ifaces for different stuff and this place shouldn't know anything about it. * src/NetworkManagerPolicy.c: Get rid of leftover global * variable global_policy. (global_state_changed): Implement. In the current NM it's not really important, but will be required in the case of multiple active devices. (Or even better, if stuff like that gets moved out from NM). * src/vpn-manager/nm-vpn-connection.c * (connection_state_changed): Don't call nm_system_device_set_from_ip4_config() directly, use nm_device_set_ip4_config() instead. * src/nm-device.c: Add a ip_face protected member. It's used for * 'multi-interface' devices like serial devices (ttyS0 and ppp0 for example). (nm_device_get_ip_iface): Implement. Default to the device iface if ip_iface is not set. (nm_device_set_ip_iface): Implement. (nm_device_activate_stage5_ip_config_commit): Move all the extra actions that happen after setting ip4_config from here ... (nm_device_set_ip4_config): ... to here. The reason behind it is that no other code than this function should call nm_system_device_set_from_ip4_config() because no other code has enough information on which arguments to use. So instead, other code could just set the new ip4 config using this function and everyone is happy. * src/nm-umts-device.c: Store the pending ids so that we can * remove pending actions if we happen to get deactivated while something is pending. (automatic_registration): Handle the response that indicates pending network registration and wait until the pending registration is done. (real_deactivate_quickly): If there's a pending operation, cancel it. * src/nm-serial-device.c (ppp_ip4_config): Set the ip_iface when * the iface is up ... (real_deactivate_quickly): ... and remove it when it's down. (nm_serial_device_get_reply): Return the timeout id so that the callers can remove it if needed. (nm_serial_device_wait_for_reply): Ditto. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3141 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-12-06 14:51:43 +00:00
gboolean nm_system_device_set_from_ip4_config (const char *iface,
NMIP4Config *config,
gboolean route_to_iface);
2007-09-12 Tambet Ingo <tambet@gmail.com> * src/vpn-manager/nm-vpn-connection.[ch]: * src/vpn-manager/nm-vpn-manager.[ch]: * src/vpn-manager/nm-vpn-service.[ch]: Rewrite the vpn handling * code. Using dbus-glib, GObjects, signals etc. * libnm-glib/nm-vpn-manager.[ch]: * libnm-glib/nm-vpn-connection.[ch]: Now that the NM * implementation changed so much, rewrite these too. * libnm-glib/Makefile.am: Add new files to build, build new * binding files for the new introspection files. * libnm-glib/nm-client.[ch]: Remove all VPN related stuff from * here. * libnm-glib/nm-dbus-utils.[ch]: Renamed from nm-utils.[ch] that * was shadowing the header with the same name from libnm-utils. * libnm-glib/nm-vpn-plugin.[ch]: Implement. * libnm-util/Makefile.am: Add nm-utils.[ch] to build. * introspection/nm-vpn-plugin.xml: Implement. * introspection/nm-vpn-connection.xml: Implement. * introspection/nm-vpn-manager.xml: Implement. * src/NetworkManagerSystem.c * (nm_system_vpn_device_set_from_ip4_config): Remove the named manager argument, it can just as easily get it as the caller. (nm_system_vpn_device_unset_from_ip4_config): Ditto. * src/vpn-manager/nm-dbus-vpn.[ch]: Remove. * src/nm-dbus-manager.h: Fix up the name_owner signal signature. * src/dhcp-manager/nm-dhcp-manager.c (garray_to_string): Remove, * use one from libnm-utils. * libnm-util/nm-connection.c: Ditto. * src/NetworkManagerMain.h: Remove, it's finally empty. * configure.in: Remove utils/ from build. * include/NetworkManagerVPN.h: Add some more defines to reduce * the amount of hard-coded strings. * utils/: Move it over to libnm-util. * test/Makefile.am: Link against libnm-util now that util/ is * gone. * dispatcher-daemon/Makefile.am: Ditto. * src/Makefile.am: Ditto. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2798 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-09-12 16:23:53 +00:00
gboolean nm_system_vpn_device_set_from_ip4_config (NMDevice *active_device,
const char *iface,
NMIP4Config *config,
GSList *routes);
2007-09-12 Tambet Ingo <tambet@gmail.com> * src/vpn-manager/nm-vpn-connection.[ch]: * src/vpn-manager/nm-vpn-manager.[ch]: * src/vpn-manager/nm-vpn-service.[ch]: Rewrite the vpn handling * code. Using dbus-glib, GObjects, signals etc. * libnm-glib/nm-vpn-manager.[ch]: * libnm-glib/nm-vpn-connection.[ch]: Now that the NM * implementation changed so much, rewrite these too. * libnm-glib/Makefile.am: Add new files to build, build new * binding files for the new introspection files. * libnm-glib/nm-client.[ch]: Remove all VPN related stuff from * here. * libnm-glib/nm-dbus-utils.[ch]: Renamed from nm-utils.[ch] that * was shadowing the header with the same name from libnm-utils. * libnm-glib/nm-vpn-plugin.[ch]: Implement. * libnm-util/Makefile.am: Add nm-utils.[ch] to build. * introspection/nm-vpn-plugin.xml: Implement. * introspection/nm-vpn-connection.xml: Implement. * introspection/nm-vpn-manager.xml: Implement. * src/NetworkManagerSystem.c * (nm_system_vpn_device_set_from_ip4_config): Remove the named manager argument, it can just as easily get it as the caller. (nm_system_vpn_device_unset_from_ip4_config): Ditto. * src/vpn-manager/nm-dbus-vpn.[ch]: Remove. * src/nm-dbus-manager.h: Fix up the name_owner signal signature. * src/dhcp-manager/nm-dhcp-manager.c (garray_to_string): Remove, * use one from libnm-utils. * libnm-util/nm-connection.c: Ditto. * src/NetworkManagerMain.h: Remove, it's finally empty. * configure.in: Remove utils/ from build. * include/NetworkManagerVPN.h: Add some more defines to reduce * the amount of hard-coded strings. * utils/: Move it over to libnm-util. * test/Makefile.am: Link against libnm-util now that util/ is * gone. * dispatcher-daemon/Makefile.am: Ditto. * src/Makefile.am: Ditto. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2798 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-09-12 16:23:53 +00:00
gboolean nm_system_vpn_device_unset_from_ip4_config (NMDevice *active_device,
const char *iface,
NMIP4Config *config);
gboolean nm_system_device_set_up_down (NMDevice *dev, gboolean up);
gboolean nm_system_device_set_up_down_with_iface (const char *iface, gboolean up);
gboolean nm_system_device_is_up (NMDevice *device);
gboolean nm_system_device_is_up_with_iface (const char *iface);
void nm_system_set_hostname (NMIP4Config *config);
void nm_system_activate_nis (NMIP4Config *config);
void nm_system_shutdown_nis (void);
2008-03-07 Dan Williams <dcbw@redhat.com> First pass of multiple active device support. Expect bugs. * src/nm-ip4-config.c src/nm-ip4-config.h - (nm_ip4_config_get_secondary, nm_ip4_config_set_secondary): remove; there are better ways to do this in the named manager * src/nm-device.c src/nm-device.h - (nm_device_can_activate): return whether the device can activate a connection right now; taking into account things like carrier state and rfkill state - (nm_device_get_best_auto_connection): renamed from nm_device_get_best_connection - (real_act_stage4_get_ip4_config): MTU stuff is now handled in the device subclasses themselves, so that each device can override the MTU from it's NMSetting subclass if needed - (nm_device_set_ip4_config): set MTU when setting up routes and stuff in NetworkManagerSystem.c, not here * src/named-manager/nm-named-manager.c src/named-manager/nm-named-manager.h - (nm_named_manager_name_owner_changed, nm_named_manager_dbus_connection_changed): fix for changes to rewrite_resolv_conf() - (compute_nameservers): don't need the NMNamedManager at all, remove from parameter list - (merge_one_ip4_config): new function; merge ip4 configs together - (rewrite_resolv_conf): write out resolv.conf from all the stored ip4 configs; the VPN config takes precedence, then the best device config, then the rest of the configs - (get_domain_for_config): take the NMNamedManager as an argument to check whether the config is the VPN config - (add_ip4_config_to_named): fixups for removal of the 'secondary' attribute from ip4 configs - (add_all_ip4_configs_to_named): add all the configs in priority order - (remove_ip4_config_from_named): fix for changes to get_domain_for_config() - (nm_named_manager_add_ip4_config): assign the config to the right slot based on its type; callers must pass in the type now - (get_last_default_domain): remove, unused - (nm_named_manager_remove_ip4_config): handle config slots correctly * src/nm-device-802-11-wireless.c - (real_can_activate): new function - (real_get_best_auto_connection): renamed from real_get_best_connection - (real_act_stage4_get_ip4_config): handle MTU override * src/nm-device-802-3-ethernet.c - (real_can_activate): new function - (real_get_best_auto_connection): renamed from real_get_best_connection - (real_act_stage4_get_ip4_config): new function; handle MTU override * src/vpn-manager/nm-vpn-connection.c - (nm_vpn_connection_ip4_config_get): don't need to set the 'secondary' attribute on the ip4 config * src/NetworkManagerPolicy.c - (nm_policy_auto_get_best_device): remove - (nm_policy_device_change_check): remove - (update_default_route): new function; set the default route via the specified device - (get_device_priority): new function; return the priority number of a device type WRT which one should have the default route. Order is (highest to lowest) wired, wireless, GSM, CDMA. - (update_routing_and_dns): new function; determine which device should have the default route, then update the routing table and DNS - (maybe_auto_activate_device): new function; if a device is now available for activation, find out what connection it would like to activate and do it - (schedule_activate_check): new function; if a device can be activated now, schedule the activation. Each device may have only one pending activation at a given time. - (device_state_changed): if activation was canceled, try again, possibly with another connection; if the device was activated, update routing and DNS; if the device was deactivated, try again with another connection - (device_carrier_changed): if there is no carrier, deactivate the device; otherwise schedule an activation check for the device - (wireless_networks_changed): schedule an activation check for the device - (device_added): keep track of the signal handler IDs so they can be removed when the device goes away - (device_removed): remove any signal handlers that might be attached to the device; update routing and DNS - (schedule_activate_all): new function - (connections_added, connection_added, connection_updated): when connections change, schedule all devices for an activation check - (connection_removed): when a device is deactivated because its connection was removed, schedule another activation check for it - (nm_policy_destroy): destroy pending activations and disconnect all device signal handlers * src/nm-manager.c - (nm_manager_activate_device): if the device was already actived, deactivate it - (deactivate_old_device): remove - (connection_added_default_handler, impl_manager_activate_device): don't deactivate other devices when activating this one * src/backends/NetworkManagerGentoo.c src/backends/NetworkManagerFrugalware.c src/backends/NetworkManagerPaldo.c src/backends/NetworkManagerRedHat.c src/backends/NetworkManagerSlackware.c src/backends/NetworkManagerArch.c src/backends/NetworkManagerSuSE.c src/backends/NetworkManagerDebian.c - (nm_system_get_mtu): remove; MTU should be provided through the distro's system settings service plugin instead - (nm_system_device_add_default_route_via_device): remove - (nm_system_device_add_default_route_via_device_with_iface): remove - (nm_system_device_replace_default_route): new function; call generic implementation * src/backends/NetworkManagerGeneric.c src/backends/NetworkManagerGeneric.h - (nm_generic_device_add_default_route_via_device, nm_generic_device_add_default_route_via_device_with_iface): remove - (nm_generic_device_replace_default_route): replace the default route with the given route via some gateway * src/NetworkManagerSystem.c src/NetworkManagerSystem.h - (nm_system_device_set_from_ip4_config): let the policy handle updates to routing and DNS; but set the MTU here - (nm_system_vpn_device_set_from_ip4_config): set the route with the ip_iface of the active device; use the standard MTU setting function - (nm_system_set_mtu): remove - (nm_system_device_set_mtu): consolidate MTU setting code in one place git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@3391 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2008-03-07 19:41:32 +00:00
gboolean nm_system_device_set_mtu (const char *iface, guint32 mtu);
gboolean nm_system_should_modify_resolv_conf (void);
#endif