NetworkManager/libnm-glib/nm-client.c

418 lines
10 KiB
C
Raw Normal View History

#include <dbus/dbus-glib.h>
#include <string.h>
#include "nm-client.h"
#include "nm-device-802-3-ethernet.h"
#include "nm-device-802-11-wireless.h"
#include "nm-utils.h"
#include "nm-client-bindings.h"
G_DEFINE_TYPE (NMClient, nm_client, DBUS_TYPE_G_PROXY)
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
#define NM_CLIENT_GET_PRIVATE(o) (G_TYPE_INSTANCE_GET_PRIVATE ((o), NM_TYPE_CLIENT, NMClientPrivate))
typedef struct {
DBusGProxy *bus_proxy;
gboolean manager_running;
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
NMState state;
gboolean have_device_list;
GHashTable *devices;
} NMClientPrivate;
enum {
MANAGER_RUNNING,
DEVICE_ADDED,
DEVICE_REMOVED,
STATE_CHANGE,
LAST_SIGNAL
};
static guint signals[LAST_SIGNAL] = { 0 };
static void proxy_name_owner_changed (DBusGProxy *proxy,
const char *name,
const char *old_owner,
const char *new_owner,
gpointer user_data);
static void client_state_change_proxy (DBusGProxy *proxy, guint state, gpointer user_data);
static void client_device_added_proxy (DBusGProxy *proxy, char *path, gpointer user_data);
static void client_device_removed_proxy (DBusGProxy *proxy, char *path, gpointer user_data);
static void
nm_client_init (NMClient *client)
{
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
NMClientPrivate *priv = NM_CLIENT_GET_PRIVATE (client);
priv->state = NM_STATE_UNKNOWN;
priv->devices = g_hash_table_new_full (g_str_hash, g_str_equal,
(GDestroyNotify) g_free,
(GDestroyNotify) g_object_unref);
}
static void
finalize (GObject *object)
{
NMClientPrivate *priv = NM_CLIENT_GET_PRIVATE (object);
g_object_unref (priv->bus_proxy);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
g_hash_table_destroy (priv->devices);
}
static void
manager_running (NMClient *client, gboolean running)
{
if (!running) {
NMClientPrivate *priv = NM_CLIENT_GET_PRIVATE (client);
priv->state = NM_STATE_UNKNOWN;
g_hash_table_remove_all (priv->devices);
priv->have_device_list = FALSE;
}
}
static void
nm_client_class_init (NMClientClass *client_class)
{
GObjectClass *object_class = G_OBJECT_CLASS (client_class);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
g_type_class_add_private (client_class, sizeof (NMClientPrivate));
/* virtual methods */
object_class->finalize = finalize;
client_class->manager_running = manager_running;
/* signals */
signals[MANAGER_RUNNING] =
g_signal_new ("manager-running",
G_OBJECT_CLASS_TYPE (object_class),
G_SIGNAL_RUN_FIRST,
G_STRUCT_OFFSET (NMClientClass, manager_running),
NULL, NULL,
g_cclosure_marshal_VOID__BOOLEAN,
G_TYPE_NONE, 1,
G_TYPE_BOOLEAN);
signals[DEVICE_ADDED] =
g_signal_new ("device-added",
G_OBJECT_CLASS_TYPE (object_class),
G_SIGNAL_RUN_FIRST,
G_STRUCT_OFFSET (NMClientClass, device_added),
NULL, NULL,
g_cclosure_marshal_VOID__OBJECT,
G_TYPE_NONE, 1,
G_TYPE_OBJECT);
signals[DEVICE_REMOVED] =
g_signal_new ("device-removed",
G_OBJECT_CLASS_TYPE (object_class),
G_SIGNAL_RUN_FIRST,
G_STRUCT_OFFSET (NMClientClass, device_removed),
NULL, NULL,
g_cclosure_marshal_VOID__OBJECT,
G_TYPE_NONE, 1,
G_TYPE_OBJECT);
signals[STATE_CHANGE] =
g_signal_new ("state-change",
G_OBJECT_CLASS_TYPE (object_class),
G_SIGNAL_RUN_FIRST,
G_STRUCT_OFFSET (NMClientClass, state_change),
NULL, NULL,
g_cclosure_marshal_VOID__UINT,
G_TYPE_NONE, 1,
G_TYPE_UINT);
}
static void
setup_bus_listener (NMClient *client, DBusGConnection *connection)
{
NMClientPrivate *priv = NM_CLIENT_GET_PRIVATE (client);
GError *err = NULL;
priv->bus_proxy = dbus_g_proxy_new_for_name (connection,
"org.freedesktop.DBus",
"/org/freedesktop/DBus",
"org.freedesktop.DBus");
dbus_g_proxy_add_signal (priv->bus_proxy, "NameOwnerChanged",
G_TYPE_STRING, G_TYPE_STRING, G_TYPE_STRING,
G_TYPE_INVALID);
dbus_g_proxy_connect_signal (priv->bus_proxy,
"NameOwnerChanged",
G_CALLBACK (proxy_name_owner_changed),
client, NULL);
if (!dbus_g_proxy_call (priv->bus_proxy,
"NameHasOwner", &err,
G_TYPE_STRING, NM_DBUS_SERVICE,
G_TYPE_INVALID,
G_TYPE_BOOLEAN, &priv->manager_running,
G_TYPE_INVALID)) {
g_warning ("Error on NameHasOwner DBUS call: %s", err->message);
g_error_free (err);
}
}
NMClient *
nm_client_new (void)
{
DBusGConnection *connection;
DBusGProxy *proxy;
NMClient *client;
GError *err = NULL;
connection = dbus_g_bus_get (DBUS_BUS_SYSTEM, &err);
if (!connection) {
g_warning ("Couldn't connect to system bus: %s", err->message);
g_error_free (err);
return NULL;
}
client = (NMClient *) g_object_new (NM_TYPE_CLIENT,
"name", NM_DBUS_SERVICE,
"path", NM_DBUS_PATH,
"interface", NM_DBUS_INTERFACE,
"connection", connection,
NULL);
proxy = DBUS_G_PROXY (client);
dbus_g_proxy_add_signal (proxy, "StateChange", G_TYPE_UINT, G_TYPE_INVALID);
dbus_g_proxy_connect_signal (proxy,
"StateChange",
G_CALLBACK (client_state_change_proxy),
NULL,
NULL);
dbus_g_proxy_add_signal (proxy, "DeviceAdded", DBUS_TYPE_G_OBJECT_PATH, G_TYPE_INVALID);
dbus_g_proxy_connect_signal (proxy,
"DeviceAdded",
G_CALLBACK (client_device_added_proxy),
NULL,
NULL);
dbus_g_proxy_add_signal (proxy, "DeviceRemoved", DBUS_TYPE_G_OBJECT_PATH, G_TYPE_INVALID);
dbus_g_proxy_connect_signal (proxy,
"DeviceRemoved",
G_CALLBACK (client_device_removed_proxy),
NULL,
NULL);
setup_bus_listener (client, connection);
return client;
}
static void
proxy_name_owner_changed (DBusGProxy *proxy,
const char *name,
const char *old_owner,
const char *new_owner,
gpointer user_data)
{
if (name && !strcmp (name, NM_DBUS_SERVICE)) {
NMClientPrivate *priv = NM_CLIENT_GET_PRIVATE (user_data);
if (new_owner && strlen (new_owner) > 0)
priv->manager_running = TRUE;
else
priv->manager_running = FALSE;
g_signal_emit (NM_CLIENT (user_data), signals[MANAGER_RUNNING], 0, priv->manager_running);
}
}
static void
client_state_change_proxy (DBusGProxy *proxy, guint state, gpointer user_data)
{
NMClient *client = NM_CLIENT (proxy);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
NMClientPrivate *priv = NM_CLIENT_GET_PRIVATE (client);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
if (priv->state != state) {
priv->state = state;
g_signal_emit (client, signals[STATE_CHANGE], 0, state);
}
}
static NMDevice *
get_device (NMClient *client, const char *path, gboolean create_if_not_found)
{
NMClientPrivate *priv = NM_CLIENT_GET_PRIVATE (client);
NMDevice *device;
device = g_hash_table_lookup (priv->devices, path);
if (!device && create_if_not_found) {
DBusGConnection *connection = NULL;
NMDeviceType type;
g_object_get (client, "connection", &connection, NULL);
type = nm_device_type_for_path (connection, path);
switch (type) {
case DEVICE_TYPE_802_3_ETHERNET:
device = NM_DEVICE (nm_device_802_3_ethernet_new (connection, path));
break;
case DEVICE_TYPE_802_11_WIRELESS:
device = NM_DEVICE (nm_device_802_11_wireless_new (connection, path));
break;
default:
device = nm_device_new (connection, path);
}
if (device)
g_hash_table_insert (priv->devices, g_strdup (path), device);
}
return device;
}
static void
client_device_added_proxy (DBusGProxy *proxy, char *path, gpointer user_data)
{
NMClient *client = NM_CLIENT (proxy);
NMDevice *device;
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
device = get_device (client, path, TRUE);
if (device)
g_signal_emit (client, signals[DEVICE_ADDED], 0, device);
}
static void
client_device_removed_proxy (DBusGProxy *proxy, char *path, gpointer user_data)
{
NMClient *client = NM_CLIENT (proxy);
NMDevice *device;
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
device = get_device (client, path, FALSE);
if (device) {
g_signal_emit (client, signals[DEVICE_REMOVED], 0, device);
g_hash_table_remove (NM_CLIENT_GET_PRIVATE (client)->devices, path);
}
}
gboolean
nm_client_manager_is_running (NMClient *client)
{
g_return_val_if_fail (NM_IS_CLIENT (client), FALSE);
return NM_CLIENT_GET_PRIVATE (client)->manager_running;
}
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
static void
devices_to_slist (gpointer key, gpointer value, gpointer user_data)
{
GSList **list = (GSList **) user_data;
*list = g_slist_prepend (*list, value);
}
GSList *
nm_client_get_devices (NMClient *client)
{
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
NMClientPrivate *priv;
GSList *list = NULL;
GPtrArray *array = NULL;
GError *err = NULL;
g_return_val_if_fail (NM_IS_CLIENT (client), NULL);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
priv = NM_CLIENT_GET_PRIVATE (client);
if (priv->have_device_list) {
g_hash_table_foreach (priv->devices, devices_to_slist, &list);
return list;
}
if (!org_freedesktop_NetworkManager_get_devices (DBUS_G_PROXY (client), &array, &err)) {
g_warning ("Error in get_devices: %s", err->message);
g_error_free (err);
} else {
int i;
for (i = 0; i < array->len; i++) {
NMDevice *device;
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
device = get_device (client, (const char *) g_ptr_array_index (array, i), TRUE);
if (device)
list = g_slist_append (list, device);
}
g_ptr_array_free (array, TRUE);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
priv->have_device_list = TRUE;
}
return list;
}
gboolean
nm_client_wireless_get_enabled (NMClient *client)
{
GValue value = {0,};
gboolean enabled = FALSE;
g_return_val_if_fail (NM_IS_CLIENT (client), enabled);
if (nm_dbus_get_property (DBUS_G_PROXY (client),
NM_DBUS_INTERFACE,
"WirelessEnabled",
&value))
enabled = g_value_get_boolean (&value);
return enabled;
}
void
nm_client_wireless_set_enabled (NMClient *client, gboolean enabled)
{
GValue value = {0,};
g_return_if_fail (NM_IS_CLIENT (client));
g_value_init (&value, G_TYPE_BOOLEAN);
g_value_set_boolean (&value, enabled);
nm_dbus_set_property (DBUS_G_PROXY (client),
NM_DBUS_INTERFACE,
"WirelessEnabled",
&value);
}
NMState
nm_client_get_state (NMClient *client)
{
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
NMClientPrivate *priv;
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
g_return_val_if_fail (NM_IS_CLIENT (client), NM_STATE_UNKNOWN);
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
priv = NM_CLIENT_GET_PRIVATE (client);
if (priv->state == NM_STATE_UNKNOWN) {
GValue value = {0,};
if (nm_dbus_get_property (DBUS_G_PROXY (client),
NM_DBUS_INTERFACE,
"State",
&value))
priv->state = g_value_get_uint (&value);
}
2007-03-02 Tambet Ingo <tambet@ximian.com> * libnm-glib/nm-device-802-11-wireless.c: Cache networks (bssids) list. We get signalled when it changes. * libnm-glib/nm-client.c: Cache NMState and device list, we get signalled when it changes. * libnm-glib/nm-device.c: Cache the device state property. * libnm-glib/nm-access-point.c: Cache the strength property. * src/nm-device-802-11-wireless.c: Fix wireless device scanning scheduler. The new algorithm is to start from SCAN_INTERVAL_MIN (currently defined as 0) and add a SCAN_INTERVAL_STEP (currently 20 seconds) with each successful scan until SCAN_INTERVAL_MAX (currently 120 seconds) is reached. Do not scan while the device is down, activating, or activated (in case of A/B/G cards). Remove some old dead ifdef'ed out code that used to configure wireless devices, it's all done through supplicant now. * src/supplicant-manager/nm-supplicant-interface.c: Fix the reference counting issues with pending calls which caused leaks and crashes when interface was removed (now that the interface actually gets removed). * src/nm-call-store.c: Make a copy of data before running a foreach with user callback on it - The most common usage pattern is to cancel (and thus remove) all pending calls with foreach which would modify the hash table we're iterating over. * src/nm-manager.c: When a device is added, make sure it is "up". When it's removed or disabled due to disabling wireless or networking, bring it down. * include/NetworkManager.h: Add new device state NM_DEVICE_STATE_DOWN. * src/nm-device-802-11-wireless.c: * src/nm-device-802-3-ethernet.c: * src/nm-device.c: - Remove "init" virtual function, all gobjects have a place for that already (constructor). - Replace "start" virtual function with "bring_up", devices can be brought up and down more than just on startup now. - Add "is_up" virtual function. - Implement one way to bring a device down instead of previous 4 different ways, each of witch did something different. * src/NetworkManagerUtils.c (nm_dev_sock_open): This doesn't need an NMDevice, all it needs is the device interface. Get rid of NMData.dev_list (3 members to go). Get rif of NMData in a lot of places. * gnome/libnm_glib/libnm_glib.c: Make it compile again. git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@2395 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
2007-03-02 09:30:48 +00:00
return priv->state;
}
void
nm_client_sleep (NMClient *client, gboolean sleep)
{
GError *err = NULL;
g_return_if_fail (NM_IS_CLIENT (client));
if (!org_freedesktop_NetworkManager_sleep (DBUS_G_PROXY (client), sleep, &err)) {
g_warning ("Error in sleep: %s", err->message);
g_error_free (err);
}
}